456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Past 100k Miles? The Best High Mileage Oil for BMW Engines

best high mileage oil for bmw: oil poured onto a spoon outdoors

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Plenty of BMWs on Grand Rapids roads have rolled past 100,000 miles, and their owners start to notice a little seepage, an extra quart between changes or a slower turn on frozen mornings. The best high mileage oil for BMW engines is usually not a bottle with “high mileage” on the front. It is an oil that carries the BMW Longlife approval your engine was designed around, in the grade your manual lists.

Below we explain the approvals, then review six bottles. On whether seal-conditioning formulas help at all, see our article on whether high mileage oil is worth it, and for other makes our review of high mileage oil for any car.

Quick answer

What oil should an older, high-mileage BMW run?

Use the approval and viscosity in your owner’s manual, usually BMW Longlife-01 on older US gasoline cars. Liqui Moly Synthoil Energy A40 0W-40, Motul 8100 X-max 0W-40 and Triax Euro LX 5W-40 all list LL-01. Cars whose manual names LL-04 can use Top Tec 4100, Motul X-clean Gen2 or Ravenol HLS.

Our Quick Picks

Three quick picks for older gasoline BMWs that call for Longlife-01. All six oils are reviewed below.

Liqui Moly Synthoil Energy A40 0W-40 product photo
Cold-start 0W-40

Liqui Moly Synthoil Energy A40 0W-40

0W-40 · LL-01 (to 2018) · 5 liter

A German full synthetic with a 0W rating for fast flow on frozen mornings.

SuitsE46, E90 and other older LL-01 gasoline BMWs
View on Amazon →
Motul 8100 X-max 0W-40 product photo
Bulk LL-01 pick

Motul 8100 X-max 0W-40

0W-40 · ACEA A3/B4 · 4 x 5 liter

A full SAPS 0W-40 in a four-bottle pack for owners who change their own oil.

SuitsN54 and N55 owners on shorter change intervals
View on Amazon →
Triax Euro LX 5W-40 product photo
Oil-use 5W-40

Triax Euro LX 5W-40

5W-40 · Full SAPS · 5 quart

A shear-stable 5W-40 for worn engines that use some oil.

SuitsOlder X5 and 3 Series cars that burn a little oil
View on Amazon →

The Approval Code Matters More Than the Label

BMW sets its own oil standards, called Longlife specifications. Many familiar high-mileage formulas are built around US API and ILSAC ratings and list no BMW Longlife approval at all. If LL-01 or LL-04 isn’t on the label or the maker’s page, treat the oil as unproven in your engine.

  • Longlife-01 (LL-01): the approval most older US-market BMW gasoline engines call for, typically in 0W-40, 5W-30 or 5W-40.
  • Longlife-04 (LL-04): a lower-ash standard aimed at engines with particulate filters. On US cars it shows up most often in the diesel models, so use it only where your manual lists it.
  • Newer standards: late-model engines may call for LL-17 FE+ and thin grades such as 0W-20. Those cars belong in our guide to oil for newer BMW models, not here.

There is a detail that works in an older car’s favor. Liqui Moly’s US page for Synthoil Energy A40 0W-40 lists its LL-01 recommendation for cars up to 2018, and some Motul data sheets carry a similar note. That cutoff matters little for an E46, E90 or first-generation X5, which is exactly the car most people searching this topic own.

What a Worn BMW Engine Asks of Its Oil

  • Gasket seepage: valve cover and oil filter housing gaskets often harden with age on these engines. No oil reseals a hardened gasket for long, so treat oil as maintenance and the gasket as a repair.
  • Oil consumption: worn rings and valve stem seals burn a little oil. An oil with low evaporative loss and a grade at the upper end of what your manual allows, such as 5W-40 instead of 5W-30, can slow how fast the level drops.
  • Turbo heat on the N54 and N55: the turbochargers cook oil hard, so an oil that resists deposits and a drain interval that isn’t stretched both count.
  • Cold starts: a 0W grade flows faster on a frozen morning. Our review of motor oil for cold weather covers how winter grades work.

Best High Mileage Oil for BMW: Six Bottles Compared

The first three list BMW Longlife-01 and suit most older US gasoline cars. The last three are LL-04 oils for engines whose manual names that standard. Check each label against your manual before you pour.

1. Liqui Moly Synthoil Energy A40 SAE 0W-40: 5 Liter Full Synthetic for BMW Longlife-01

Liqui Moly Synthoil Energy A40 0W-40 product photo
Key features
  • Fully synthetic 0W-40 for gasoline engines
  • ACEA A3/B4, API SP, Porsche A40
  • Recommended for BMW Longlife-01 (up to 2018)
  • 5 liter jug, part number 2050

Synthoil Energy A40 is Liqui Moly’s fully synthetic 0W-40 for gasoline engines, sold here as a single 5 liter jug under part number 2050. The maker’s US page lists ACEA A3 and B4, API SP and Porsche A40, and it recommends the oil for vehicles that need BMW Longlife-01 up to the 2018 model year. It also names MB 229.3, MB 229.5 and VW 502 00 and 505 00.

Liqui Moly describes it as a top-of-the-line synthetic that reaches the far corners of the engine quickly after a cold start and holds up under all operating conditions. The 0W rating is the practical draw for a high-mileage BMW that sits outside overnight in a Michigan winter, since thin oil at startup reaches the cam and the turbo bearings sooner. The 40 hot grade keeps a firmer film once the engine is warm, which suits a worn straight-six.

This is a good fit for an E46, E90 or early X5 whose manual lists LL-01. It is a gasoline oil, so it is not meant for a BMW diesel that calls for LL-04. One jug is short of a full fill on many six-cylinder engines, so check your capacity and plan on a second bottle or a top-up liter.

View Liqui Moly Synthoil Energy A40 0W-40 on Amazon

2. Motul 8100 X-max 0W-40: Full SAPS Synthetic Oil, Pack of Four 5 Liter Bottles

Motul 8100 X-max 0W-40 product photo
Key features
  • 100% synthetic, full SAPS formula
  • ACEA A3/B4 performance level
  • Motul lists BMW LL-01 approval
  • Four 5 liter bottles in one pack

Motul 8100 X-max is a 100% synthetic 0W-40 built with full SAPS chemistry, meaning it keeps the higher levels of ash-forming additives that older gasoline engines were designed around. This listing is a pack of four 5 liter bottles and names ACEA A3/B4 and API SN. Motul’s own product page lists approvals for BMW LL-01, MB 229.5, VW 502 00 and 505 00 and Ford WSS-M2C937-A, though some of its older data sheets limit the BMW approval to cars up to the 2018 model year.

The four-bottle pack is the main reason to pick this listing. Turbocharged N54 and N55 engines are hard on oil, and many owners of high-mileage cars choose to change it more often than the dash display suggests. Twenty liters covers several changes on a six-cylinder car. The 0W rating helps on cold starts, and the full SAPS formula suits engines without particulate filters.

This oil is not a match for a BMW diesel with a particulate filter or a newer car that calls for a low-ash standard. Check the approvals on the bottles against your owner’s manual before pouring.

View Motul 8100 X-max 0W-40 on Amazon

Puddle of golden oil on a white surface

3. TRIAX Euro LX 5W-40: Full Synthetic Full SAPS Oil for BMW Longlife-01, 5 Quart

Triax Euro LX 5W-40 product photo
Key features
  • Full synthetic, full SAPS 5W-40
  • Listed for BMW LL-01, MB 229.5, VW 502/505
  • High HTHS, TBN of 10.4
  • 5 quart jug

Triax Euro LX 5W-40 is a full synthetic, full SAPS oil, sold in a 5 quart jug. The listing says it is for applications that require ACEA A3/B4, MB 229.5 and 229.3, BMW Longlife-01, Porsche A40 and VW 502 00 and 505 00, along with API SP and SN. Note that Triax describes the oil as compatible with these standards, so read the label if you need a formal OEM approval for warranty paperwork.

Triax says the base oils are shear stable and hold their viscosity under heavy load, with a high HTHS figure that keeps a strong film at high temperature. That matters on a worn engine, where a stable 5W-40 can slow oil use compared with a grade that thins out over a long interval. The listing also cites a TBN of 10.4 and a detergent package aimed at turbo coking.

The listing supports intervals of up to 15,000 miles in mechanically sound engines, but only with regular oil analysis, and it says to follow the vehicle maker’s schedule. On a high-mileage BMW, a shorter interval is the sensible choice. It is not suited to diesels with particulate filters or to newer cars that call for low-ash oil.

View Triax Euro LX 5W-40 on Amazon

4. Motul 8100 X-clean Gen2 5W-40: Low SAPS ACEA C3 Synthetic Oil for BMW LL-04, 5 Liter

Motul 8100 X-clean Gen2 5W-40 product photo
Key features
  • 100% synthetic, ACEA C3 low SAPS
  • Listing names BMW LL-04 and MB 229.52
  • Helps protect particulate filters
  • 5 liter bottle

Motul 8100 X-clean Gen2 5W-40 is a fully synthetic oil built to the ACEA C3 standard, which sets lower limits on sulfated ash, phosphorus and sulfur. The listing says it meets BMW LL-04, MB 229.52 and 226.5, Opel OV 040 1547 and Renault RN0700 and RN0710. It comes in a single 5 liter bottle.

The low SAPS design matters most on engines with a diesel particulate filter or other sensitive exhaust parts, because less ash in the oil means less ash collecting in the filter over time. Motul also points to resistance to oxidation, sludge and deposits and a stable viscosity under heat and load. On a high-mileage engine, the 5W-40 grade gives a slightly thicker hot film than a 5W-30, which can help an engine that has started to use a little oil.

Choose this one only when your owner’s manual lists LL-04, which on US-market BMWs is most common on diesel models such as the 335d and X5 xDrive35d. It is not a Longlife-01 oil, so it is the wrong bottle for a gasoline E46 or N54 car that calls for LL-01. Confirm your engine’s approval before you order.

View Motul 8100 X-clean Gen2 5W-40 on Amazon

Bottles on a shop shelf above a chalkboard

5. Liqui Moly Top Tec 4100 SAE 5W-40: 5 Liter Low SAPS Synthetic with BMW Longlife-04

Liqui Moly Top Tec 4100 5W-40 product photo
Key features
  • Fully synthetic low SAPS 5W-40
  • ACEA C3, API SQ, MB-Approval 229.51
  • BMW Longlife-04 approval
  • 5 liter jug, part number 2330

Top Tec 4100 is a fully synthetic, low SAPS 5W-40 from Liqui Moly, sold here in a 5 liter jug under part number 2330. The maker’s US page lists ACEA C3, API SQ, BMW Longlife-04 and MB-Approval 229.51 as its approvals. It also recommends the oil where Ford WSS-M2C 917-A, GM dexos2, MB 229.31 and 229.52 or VW 505 00 and 505 01 are called for.

Liqui Moly says the oil gives strong protection against wear, along with reduced oil consumption and improved fuel economy. It is designed for both gasoline and diesel engines and is tested with catalytic converters and turbochargers. For an older BMW that has begun to use a little oil between changes, the 5W-40 grade is a sensible step up from a thinner grade, as long as the manual allows it.

This bottle belongs in an engine whose manual or service information names LL-04. On US-market BMWs that usually means the diesel models, so it is not a substitute for an LL-01 oil in a gasoline E46, E90 or N54 car. One jug may be short of a full fill, so check your capacity first.

View Liqui Moly Top Tec 4100 5W-40 on Amazon

6. RAVENOL HLS 5W-30: 5 Liter Full Synthetic Mid SAPS Oil with BMW Longlife-04

Ravenol HLS 5W-30 product photo
Key features
  • Fully synthetic, Mid SAPS formula
  • Listing names BMW Longlife-04 and API SQ
  • Low evaporative loss
  • 5 liter jug, part number J1A1531

Ravenol HLS 5W-30 is a fully synthetic, Mid SAPS motor oil from the German maker, sold in a 5 liter jug under part number J1A1531. The listing says it is approved to API SQ, BMW Longlife-04, GM dexos2 and MB-Approval 229.51 and 229.52. Ravenol builds it with its CleanSynto base oil process for gasoline and diesel passenger car engines, including turbocharged and direct-injection designs.

Two parts of the listing speak to an older engine. Ravenol says the oil has low evaporative loss, which means less of it boils off at high temperature and the level drops more slowly between changes. It also claims dependable flow in extreme cold, below -30C, along with a stable film at high temperature. The Mid SAPS formula is designed to protect diesel particulate filters from clogging.

Pick this oil if your owner’s manual calls for LL-04 in a 5W-30 grade. It is not a Longlife-01 oil, so it doesn’t belong in a gasoline E46, E90 or N54 car that lists LL-01. It is also lighter than the 5W-40 picks here, so it does less for a car that already burns oil. Confirm the grade and approval in your manual first.

View Ravenol HLS 5W-30 on Amazon

E46, E90, N54 or X5: Matching the Oil to the Car

This table is a starting point for common older BMWs. Your owner’s manual and the oil filler cap have the final say, because approvals changed over the years and between markets.

Car and engineApproval owners usually find listedPicks that list it
E46 3 Series (M54)LL-01Synthoil Energy A40, X-max 0W-40, Euro LX 5W-40
E90 328i (N52)LL-01Synthoil Energy A40, X-max 0W-40, Euro LX 5W-40
335i and 135i (N54, N55)LL-01X-max 0W-40, Euro LX 5W-40, Synthoil Energy A40
X5 E53 and E70 gasolineLL-01Euro LX 5W-40, X-max 0W-40, Synthoil Energy A40
335d and X5 xDrive35d dieselLL-04Top Tec 4100, X-clean Gen2, HLS 5W-30
Older BMW models and the oil approvals to confirm in the owner’s manual
Power tools on a workshop shelf

BMW’s Condition Based Service display often allows long gaps between changes. Many owners of older, high-mileage cars choose a shorter interval than the dash suggests, especially with turbo engines and lots of short trips. Our guide on how often to change oil explains how to set a sensible schedule.

West Michigan Winters and an Older BMW

Our winters are hard on oil in ways that have little to do with mileage. Short drives in the cold never let the engine fully warm up, so moisture and fuel collect in the crankcase. A creamy film under the filler cap after a run of cold days is often condensation, and our article on a milky substance under the oil cap explains when it is harmless and when it is not.

Red classic sedan by a snowy lake

A 0W-40 LL-01 oil gives the quickest flow on subzero mornings, while a 5W-40 suits a car that burns a little oil and spends summer in stop-and-go heat. If your car mostly makes short winter trips, changing oil before the cold and again in spring keeps it fresh through the worst months.

When the Engine Needs More Than Fresh Oil

Even the best high mileage oil for BMW engines can’t stop a leaking filter housing gasket from dripping onto a belt, or fix low oil pressure. If the oil pressure warning flickers, stop and read our guide to an oil pressure light that comes on before driving further.

Amber liquid swirling in a glass

Our oil change service in Creston can fill your BMW with an oil that lists the approval your manual calls for, and it is a good moment to have seepage looked at. For gaskets, sensors and other model-specific repairs, our foreign and European car repair covers older BMWs along with other imports.

Frequently Asked Questions

Can I put regular high mileage oil in my BMW?

Only if the bottle or the maker’s page lists the BMW approval your manual calls for, such as LL-01. Many common high-mileage formulas don’t carry a BMW Longlife approval, so an approved full synthetic is the safer choice.

Is 0W-40 or 5W-40 better for a high-mileage N54 or N55?

Both grades are common LL-01 choices for these engines. A 0W-40 flows faster on cold starts, while a 5W-40 can help a little with oil use. Pick whichever grade your owner’s manual allows for your climate.

Will a thicker oil stop my E46 from leaking?

Not for long. Leaks on an older E46 usually come from hardened valve cover or oil filter housing gaskets. A heavier grade may slow a drip, but the gasket still needs replacing.

What does “up to 2018” mean on an LL-01 oil?

Some makers now list their LL-01 approval for vehicles built up to the 2018 model year. For an older BMW that note is not a problem. For a newer car, check the manual for the current standard.

Older BMW leaving spots on the driveway or drinking oil between changes? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up an oil change through our contact page.

Short on daytime hours? Leave the car with our after-hours drop-off. We’re at 456 Carrier St NE in Creston.