As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A coil that copes fine with a commute can start to struggle once the engine sees full throttle, high rpm, boost or nitrous. The best ignition coils for performance driving keep the spark strong when cylinder pressure is at its highest, and they bolt in exactly where the factory coils sat.
Performance coils are sold engine by engine, so this guide uses one reference engine with a deep aftermarket: the 2005 to 2013 GM Gen IV LS V8 with the square car-style coil, which covers the LS2, LS3 and LS7. For other engines, our guide to choosing an ignition coil brand explains how the main makers compare.
Quick answer
Which ignition coils suit a hard-driven LS engine?
For a stock or lightly modified LS2, LS3 or LS7, the MSD 82658 Blaster LS set is a direct, sensible upgrade. Boosted and nitrous builds point to Granatelli’s 85kV Malevolent set or its 80kV Pro Series Extreme. MSD’s 82878 Pro Power adds multiple sparks at idle, but its oversized body needs a clearance check first.
Our Quick Picks
Three LS coil sets for three kinds of hard driving: a quick street upgrade, a high-compression track engine and a boosted or nitrous build.

MSD 82658 Blaster LS
MSD's bolt-in Blaster set for the square-coil LS family.

Granatelli 28-0513-CP
Granatelli's 80kV set for high-compression and track LS engines.

Granatelli Malevolent 28-0513-CPM
Granatelli's highest-output LS set for power-adder builds.
What a High-Output Coil Actually Changes
An ignition coil turns 12 volts into the tens of thousands of volts needed to jump the spark plug gap. Under boost, nitrous or high compression, the air and fuel packed into the cylinder resist that spark harder. A weak coil can then misfire or lose the spark altogether, which racers call spark blowout.
The kV figure printed on a box is a maximum, not a power number. Granatelli’s ignition coil FAQ puts it plainly: the plug does not use the full rating on every firing, and extra voltage gives headroom when boost, compression or rpm make the spark harder to fire. A higher-output coil helps most when the existing ignition is the part holding the engine back.
- Stock or bolt-on engines: healthy factory coils are rarely the limit, so the gain is mostly from replacing tired originals.
- Cam, heads or high compression: a step up in output gives margin at high rpm.
- Boost or nitrous: this is where a strong coil earns its place, together with the correct plug and a tighter gap where the tuner calls for it.
Matching Coils to Your LS Before You Order
Not every LS coil is the same part. MSD sells separate sets for the 1997 to 2006 LS1 and LS6, for 1999 to 2007 truck engines with square or heat-sink coils, and for the 2005 to 2013 car-style engines covered here. MSD’s 82658 product page lists that later set as a replacement for factory coil numbers 12570616, 12573190 and 12611424.
Pull one coil and compare its shape, connector and bracket bolt spacing with the listing before you buy eight. Then confirm your year, model and engine on the Amazon page, because a coil that suits a 2009 Corvette LS3 may not suit an older truck with the same displacement.
Best Ignition Coils for Performance Driving: Six LS Sets Up Close
Each set below is listed for the 2005 to 2013 square-coil LS family. Check the listing against your engine code before ordering.
1. MSD 82658 Blaster LS: 8-Coil Set for 2005-2013 LS2, LS3 and LS7

- Set of eight red coils
- Listed for LS2, LS3, LS4, LS7 and LS9
- Bolt-in replacement for factory coils
- One-year MSD warranty
The MSD 82658 is a set of eight Blaster LS coils in red for the later GM Gen IV V8. MSD lists it for 2005 to 2013 LS2, LS3, LS4, LS7 and LS9 engines and as a replacement for factory coil numbers 12570616, 12573190 and 12611424. That covers engines found in cars such as the C6 Corvette and the 2010 to 2015 Camaro SS, along with a long list of trucks and SUVs in MSD’s application guide.
MSD describes the Blaster LS line as a more efficient upgrade for worn coils, designed as a bolt-in part that uses the factory mounting and connectors. Because all eight come in one box, every cylinder gets the same coil at once. That matters on a car driven hard, where a single weak coil can show up as a stumble near the rev limiter or a misfire code after a hard pull down the strip.
MSD backs the set with a one-year warranty. It is a sensible step for a stock or lightly modified LS that is due for coils anyway. A boosted or nitrous build may want a set with a stated high kV rating instead. Pull a coil and compare it with MSD’s coil identification guide, then confirm your year, model and LS engine on Amazon before ordering.
View MSD 82658 Blaster LS on Amazon
2. MSD Street Fire 55118: 8-Coil Set for 2005-2013 GM LS Square Coils

- Set of eight black coils
- For 2005-2013 LS2, LS3, LS4, LS7, LS9
- Accepts the factory connectors
- One-year warranty
Street Fire is MSD’s value line, and the 55118 is its eight-coil set for the same 2005 to 2013 square-coil LS family. MSD lists it for LS2, LS3, LS4, LS7 and LS9 engines. The coils mount directly in place of the factory parts and accept the original connectors, so no wiring changes or extra brackets are needed.
According to MSD, the coils use selected materials and efficient winding ratios to improve output over factory-style parts. The listing describes hotter, higher spark energy for quicker throttle response. In practice, this set suits an owner whose original coils have many miles and summers of underhood heat behind them and who wants a performance-branded replacement rather than a basic stock part.
The black finish keeps a factory look under the hood, which some owners prefer on a stock-appearing car. Like the Blaster set, it carries a one-year warranty. MSD does not publish a kV figure for the line, so treat it as a refresh for a healthy street or weekend engine rather than ignition built for heavy boost. Check the coil shape against your engine, and confirm your year, model and LS engine on the Amazon listing before buying.
View MSD Street Fire 55118 on Amazon

3. ACCEL 140043 SuperCoil: Single Coil for 2005-Up GM LS2, LS3 and LS7

- Sold as one coil
- For 2005 and newer LS2, LS3, LS7
- Direct plug-in replacement
- Epoxy-filled construction
ACCEL’s 140043 is the brand’s yellow SuperCoil for the later LS engine, sold as a single coil. The listing says it is engineered for 2005 and newer GM LS2, LS3 and LS7 engines and works as a direct plug replacement in the factory location. Buying singly is the main difference from the other options here, and it suits two kinds of owner.
The first has one coil that has failed on a set that is otherwise healthy, and wants a performance part rather than a basic stock replacement. The second wants to spread the cost of a full upgrade, although for an upgrade all eight should match before the car sees hard use. ACCEL claims more torque, quicker starts and sharper throttle response than aging stock coils, along with reduced misfire and hesitation.
Those claims assume the old coils were tired, so a healthy factory set will show less change. ACCEL does not list a kV rating on the Amazon page. Remember that a V8 needs eight coils, and order the full number for a complete swap. Match the yellow coil’s shape and bracket to your originals, then confirm your year, model and LS engine on Amazon before buying.
View ACCEL 140043 SuperCoil on Amazon
4. MSD 82878 Pro Power: 8-Coil Multiple-Spark Set for GM LS2 and LS7

- Multiple sparks at idle rpm
- Set of eight oversized coils
- Uses factory coil location and connectors
- CARB EO D-722-4 listed
The Pro Power 82878 is MSD’s higher-output LS set, and its title names GM LS2 and LS7 engines. MSD’s application list is much longer and also covers many 1999 to 2009 4.8, 5.3, 6.0 and 8.1 liter trucks. These are multiple spark coils: they fire more than once per cycle at idle rpm and deliver higher spark energy and voltage across the rev range.
MSD aims the set at built LS engines with more compression, a cam or intake work, or nitrous or boost. The coils use the factory coil location and connectors, but the bodies are oversized, so check clearance and MSD’s bolt spacing guide first. Each coil also has an extra 2-pin connector that MSD says must be plugged in, because the coil will not operate without it. That connector is there for optional ignition or timing control.
The set carries CARB Executive Order D-722-4, which makes it legal on emissions-controlled vehicles when installed according to MSD’s application guide. It suits a cammed street car that idles roughly or a power-adder build. Confirm your year, model and engine on Amazon, and read MSD’s instructions before ordering for an LS3 or a truck.
View MSD 82878 Pro Power on Amazon

5. Granatelli 28-0513-CP Pro Series Extreme: 80kV Coil Set for LS2, LS3 and LS7

- Rated at 80kV per coil
- Complete set of eight
- LS2, LS3, LS7, LS9, LSA square coil
- Plug-and-play fit
Granatelli Motor Sports in Oxnard, California, builds its Pro Series Extreme coils for engines that ask more of the ignition. The 28-0513-CP is the complete eight-coil set for the GM LS square-coil family, which Granatelli lists as covering LS2, LS3, LS7, LS9, LSA and related engines. Each coil is rated at 80kV, and the set is designed as a direct-fit, plug-and-play replacement.
That rating sits well above Granatelli’s 60kV Street Fighter line, and the company places this series for high-compression, high-rpm and power-adder builds. The extra headroom helps a cammed or high-compression engine hold a clean spark through long pulls on a road course or at the top of each gear on the strip. Granatelli specifies that its high-output coils be run as a full set rather than mixed with weaker ones.
Plug wires are not part of this set, and no external ignition box is needed with the factory engine computer. Granatelli reports modest gains on stock engines and larger ones on modified engines, with results depending on the tune and the condition of the old coils. Confirm your year, model and LS engine on Amazon before ordering.
View Granatelli 28-0513-CP on Amazon
6. Granatelli Malevolent 28-0513-CPM: 85kV Coil Set for Boosted and Nitrous LS

- Rated at 85kV per coil
- Set of eight, black finish
- 2005-2017 LS2, LS3, LS7, LS9, LSA, L92, L99
- Made in the USA, one-year warranty
Malevolent is Granatelli’s highest-output series for GM engines, and the 28-0513-CPM is the black eight-coil set for the LS square-coil engines. The listing covers select 2005 to 2017 Chevrolet, Cadillac, Pontiac, GMC and Saab vehicles with LS2, LS3, LS7, LS9, LSA, L92, L99 and L76 engines. Each coil is rated at 85kV.
Granatelli built this set with supercharged, turbocharged and nitrous LS engines in mind. Boost and nitrous raise cylinder pressure, and that pressure makes the spark harder to fire, so the extra voltage helps keep a steady spark and reduce spark blowout. The listing notes the coils still work on naturally aspirated engines, and they plug in and bolt in place of the factory coils with no wiring changes.
The set is listed as made in the USA and comes with a one-year warranty from Granatelli. A higher rating is not a horsepower figure on its own, and a boosted build still needs the correct plugs and gap for its boost level. For drag racing with a power adder, this is the strongest LS option in this list. Check this performance engine part against your year and engine on Amazon first.
View Granatelli Malevolent 28-0513-CPM on Amazon
Picking a Set by How You Drive
The best ignition coils for performance driving depend less on brand and more on what the engine is asked to do. A weekend car that sees an autocross a month has different needs from a turbo build chasing quarter-mile times at the strip.
| Coil set | Output as listed | Suits | Check first |
|---|---|---|---|
| MSD 82658 Blaster LS | No kV figure listed | Stock and bolt-on street cars | Engine code LS2, LS3, LS4, LS7 or LS9 |
| MSD Street Fire 55118 | No kV figure listed | Refreshing tired original coils | Same square-coil fitment |
| ACCEL 140043 SuperCoil | No kV figure listed | Replacing coils one at a time | Sold singly; a V8 needs eight |
| MSD 82878 Pro Power | Multiple sparks at idle; no kV figure | Cammed and power-adder builds | Titled LS2/LS7; oversized body |
| Granatelli 28-0513-CP | 80kV | High-compression and track engines | Use as a complete set |
| Granatelli 28-0513-CPM | 85kV | Supercharged, turbo and nitrous builds | Plug type and gap for boost |

Whatever you pick, change all eight at once for an upgrade so every cylinder fires with the same output. Fresh plugs gapped to the tuner’s figure belong in the same job, and the coil boots should seat fully over each plug. Our spark plug buying guide covers plug choice in more depth.
West Michigan cars that sit through winter and come out for spring track days need one more check. Look over the coil connectors and harness clips for corrosion and brittle plastic before the first hard session, since a loose connector can drop a cylinder at full throttle just like a failed coil.
Diagnose the Misfire Before You Buy Coils
New coils are an upgrade, not a cure for every stumble. A misfire under load can also come from worn plugs, a split boot, a clogged injector, a vacuum leak or a lean condition. If the engine bogs as you press the pedal, our article on why a car hesitates when accelerating walks through the usual causes.

A flashing check engine light means an active misfire that can overheat the catalytic converter, so ease off and get it checked. Scan the cylinder-specific codes first; swapping a suspect coil to another cylinder and watching whether the code follows it is a quick, cheap test. Our check engine light diagnostic in Grand Rapids confirms whether a coil, plug or something deeper is at fault.
Mechanical timing matters too. A worn timing chain or belt that has stretched or jumped a tooth can make an engine run rough and set codes that look like ignition trouble. If your project car has a belt-driven engine, our roundup of the top timing belt kit brands shows what a complete kit includes, and timing belt and chain replacement in Grand Rapids handles the job when it is due.

More Buying Guides
Frequently Asked Questions
Do performance ignition coils add horsepower?
Only when the ignition is limiting the engine. On a healthy stock engine the change is small, while worn original coils or a boosted, nitrous or high-compression build show more of a difference. Results depend on the tune, the plugs and the condition of the coils being replaced.
What is the best ignition coil for drag racing an LS?
For a naturally aspirated strip car, a matched high-output set such as the Granatelli 80kV Pro Series Extreme gives plenty of margin. A turbo, supercharged or nitrous LS points to the 85kV Malevolent set, paired with the plug and gap your tuner specifies.
Do I need an ignition box with these LS coils?
No. All six sets here plug into the factory connectors and run from the stock engine computer. The MSD Pro Power set has an extra 2-pin connector that MSD says must be plugged in for the coil to work.
Can I mix new performance coils with old factory coils?
For an upgrade, replace all eight so every cylinder gets the same output. Granatelli specifies that its high-output Pro Series Xtreme coils go in as a complete set rather than mixed with lower-output coils. A single coil of the same type is fine for replacing one failed unit.
Chasing a misfire before your next track day in Grand Rapids? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a diagnostic visit on our contact page.
Working hours that clash with ours? Leave the keys through the after-hours drop-off at 456 Carrier St NE, Grand Rapids.
