As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
The TRX shares its badge with every other Ram 1500, but its supercharged 6.2L V8 does not share the regular Hemi’s oil filter. Shopping for the best oil filter for Ram TRX trucks starts with that point, because the can that fits a 5.7L Ram sits in a different size family from the one bolted under a TRX.
Here we explain which filter family the 6.2L takes, what to look for in a can for a truck that sees dunes, trailers and cold starts, and then review six filters by number. For a brand-level view across many vehicles, our oil filter brand comparison covers the wider market.
Quick answer
What oil filter does a Ram TRX take?
Parts listings for 2021 to 2024 TRX trucks name the Mopar MO-899, part 04884899AC, as the factory spin-on filter. Owners often step up to the Mopar MO-041 SRT filter or its WIX 57063 twin, while Mobil 1 M1-210A and K&N HP-2010 are common aftermarket crosses. Always confirm the number by VIN.
Our Quick Picks
Three quick picks: the factory Mopar can, the larger SRT-style WIX twin and a synthetic Mobil 1 cross for long intervals. All six filters are reviewed below.

Mopar 04884899AC
Mopar's own spin-on can, the number parts listings give for 2021 to 2024 TRX trucks.

WIX 57063
The WIX can TRX owners report as a twin of Mopar's MO-041 SRT filter.

Mobil 1 M1-210A
A synthetic-blend can built for extended oil change intervals.
Why the TRX Filter Differs From a Regular Ram 1500
The TRX borrows its engine from the supercharged Hellcat family rather than the everyday 5.7L Hemi. Parts sellers group its filter with the Challenger and Charger Hellcats, the Durango and Grand Cherokee supercharged models and the Viper, all of which use the larger Mopar 899-style can.
A 5.7L Ram 1500 takes a different Mopar number, so a box labeled “fits Ram 1500” may not fit your truck at all. Our guide to the oil filters for Ram 1500 Hemi, V6 and diesel engines covers those trucks, and it is the page to use if your Ram carries a 5.7 badge rather than a TRX one.
- Read the old can: the number printed on the filter you remove is the quickest cross-reference.
- Check by VIN: a parts counter or the Amazon fit tool can confirm the TRX engine from the VIN.
- Watch the model year: Ram now lists a new Ram 1500 TRX SRT with a supercharged engine and 777 horsepower, so confirm newer trucks separately rather than assuming the 2021 to 2024 part.
What Matters in a Filter for a Supercharged Truck
Every spin-on can has the same basic parts: pleated media, a center tube, a bypass valve and an anti-drainback valve. On a high-output V8 the details count, since the engine moves a lot of oil and many owners run long synthetic intervals.
- Media type: synthetic and synthetic-blend media usually hold more dirt and suit longer intervals than plain cellulose.
- Anti-drainback valve: silicone stays flexible in cold weather and keeps oil in the can overnight.
- Case strength: a heavy steel shell and solid base plate resist pressure spikes on cold, thick oil.
- Grip or nut: a textured shell or a wrench-off nut makes the next change easier on a hot engine.
Dust from desert runs or gravel two-tracks ends up in the oil faster than highway miles do. If your TRX spends weekends off-road, a can with high dirt capacity and a shorter interval is a sensible pairing.
Best Oil Filter for Ram TRX: Six Cans Reviewed
Each review sticks to what the Amazon listing or the maker states. Several of these cans name other vehicles in their titles, since one size often fits many engines, so run your TRX through Amazon’s fit tool before you order.
1. Mopar 04884899AC: Genuine MO-899 Engine Oil Filter for Stellantis Vehicles

- Genuine Mopar part 04884899AC
- Built to OEM design specs
- Spin-on can, MO-899 family
- Fits many Chrysler, Dodge, Jeep and Ram models
This is Mopar’s own spin-on oil filter, part number 04884899AC, often sold under the short code MO-899. Parts listings for 2021 to 2024 Ram 1500 TRX trucks with the supercharged 6.2L name this number as the factory filter, and the same can appears on many Hellcat and SRT models from Dodge, Jeep and Chrysler.
The Amazon listing keeps its claims plain. It says the filter is built to OEM design specs for Stellantis vehicles, captures contaminants to support clean oil circulation and is designed for a simple install. Mopar is the original equipment parts brand for Chrysler, Dodge, Jeep, Ram and FIAT, so the thread, gasket and valve settings follow the factory design rather than a cross-reference chart.
This can suits an owner who follows the oil change indicator and wants the part the truck was built around. The listing does not print a model year range or a media type in its title, so match it against the number on the can you are removing or run your VIN through the fit tool. If you plan long synthetic intervals or a lot of dusty off-road miles, one of the synthetic-media crosses below may be the better partner for your oil.
View Mopar 04884899AC on Amazon
2. WIX 57063: Spin-On Oil Filter for Synthetic and High Mileage Oil, SRT Applications

- Blended media, 99% at 26 microns
- Silicone anti-drainback valve
- Rated up to 15,000 miles
- Listing names Viper 8.4L and Challenger, Charger
WIX lists the 57063 for the Dodge Viper SRT-10 8.4L V10 and for 2016 and 2017 Challenger and Charger models. TRX owners on enthusiast forums describe it as the same filter as the Mopar MO-041, the white SRT performance can that many Hellcat and TRX drivers choose as a step up from the factory MO-899.
According to the listing, the blended media captures 99 percent of particles at 26 microns, a figure WIX says it measured on its 51515 filter. A silicone anti-drainback valve is meant to stop dry starts, and the maker rates the can for intervals of up to 15,000 miles. WIX also pitches it at synthetic and high mileage oils and at harder driving such as towing, long idling and stop-and-go traffic.
Because the listing title names other vehicles rather than the TRX, treat the forum cross-reference as a starting point and confirm fit with your VIN or with the number on your current filter. It suits an owner who wants a taller SRT-style can and runs full synthetic oil. If you would rather keep the exact factory part, the Mopar MO-899 above is the simpler choice.

3. Mobil 1 M1-210A: Extended Performance Oil Filter with Synthetic Fiber Blend

- Synthetic fiber blend media
- Rated for up to 25,000 miles
- Withstands 9X normal operating pressure
- Owner-reported MO-899 cross
The Mobil 1 M1-210A is an Extended Performance spin-on filter, and TRX owners list it among the common crosses for the Mopar MO-899. Its Amazon listing describes a synthetic blend media and a rating of up to 25,000 miles of protection, which is aimed at drivers who pair it with a long-life synthetic oil.
Mobil 1 says the synthetic fibers help keep oil clean while reducing resistance to flow, and that the filter removes more contaminants than conventional cans. The case is rated to withstand up to nine times the normal system operating pressure, a useful margin on a cold start when thick oil pushes hard against the media. Those are the maker’s claims, and the change interval for your engine still comes from the owner’s manual.
This can suits an owner who already runs full synthetic oil and wants a filter that will not be the weak link between changes. A 25,000-mile rating does not mean your TRX should go that long; follow the oil change indicator and switch to the severe schedule for towing or off-road dust. Confirm the M1-210A against your truck in the fit tool before you order, since the listing does not name the TRX.
View Mobil 1 M1-210A on Amazon
4. K&N HP-2010: High Flow Oil Filter with Wrench-Off Nut

- Pleated synthetic-blend media
- Wrench-off nut on the can
- Works with synthetic or conventional oil
- Rated for up to 20,000 miles
The K&N HP-2010 is a spin-on filter whose listing covers select Chevrolet, Dodge, Ford and Lincoln models from 1991 onward. TRX owners include it in their lists of MO-899 crosses, and its signature feature is a nut on the end of the can, so you can remove it with a regular socket instead of a strap or cap wrench.
K&N describes pleated synthetic-blend media that removes most harmful contaminants, a heavy-duty canister, and laboratory testing for capacity and burst strength. The listing says it works with synthetic, conventional and blended motor oils, and the title promotes a rating of up to 20,000 miles. K&N also mentions high flow rates, which suits an engine that moves a lot of oil.
The nut is the real reason to choose this can. On a lifted truck with the filter low on the block, a filter that comes off cleanly with a ratchet saves time and skinned knuckles. Do not use the nut to tighten it, though; spin it on by hand as the box directs. Check fitment with your VIN, since the listing title names other makes, and keep your change interval tied to the owner’s manual.

5. FRAM Ultra Synthetic XG2: Dual-Layer Oil Filter with SureGrip

- Dual-layer synthetic media, 99%+
- SureGrip non-slip shell
- Silicone anti-drainback valve
- Rated for up to 20,000 miles
FRAM’s Ultra Synthetic XG2 is a spin-on filter designed for synthetic oil changes, and TRX owners name the XG2 among the crosses for the Mopar MO-899. The listing credits it with 99 percent plus filtration efficiency from dual-layer synthetic media, and with a rating of up to 20,000 miles between changes.
Two features stand out for a truck that lives through a West Michigan winter. A silicone anti-drainback valve holds oil in the can while the truck sits, which helps on cold mornings, and FRAM says the valve offers up to three times the hot oil resistance. The SureGrip coating on the shell gives your hand traction when you spin it on or off, even with oily gloves.
The listing also mentions a high nitrile gasket for durability. This can suits an owner who does their own oil changes and runs full synthetic oil, especially one who parks outside through January. As with every cross on this list, the title does not name the TRX, so confirm the XG2 with your VIN or against the number on your current can, and follow the interval your owner’s manual and oil change indicator set.
View FRAM Ultra Synthetic XG2 on Amazon
6. WIX 51372XP: XP Oil Filter Built for Synthetic Oil and Severe Use

- Synthetic-blended media, 99% at 23 microns
- Up to 20,000-mile intervals
- Designed for towing and severe use
- Owner-reported MO-899 cross
The WIX 51372XP belongs to the brand’s XP line, which WIX builds for synthetic oils and severe conditions. Its listing title names Ford, Lincoln, Mercury and Mazda models plus the Cadillac STS-V and XLR-V, while TRX owners list the 51372XP among the filters that cross to the Mopar MO-899.
WIX describes next-generation synthetic-blended media with natural fibers, which it says removes the need for wire backing behind the pleats. The listing quotes 99 percent efficiency at 23 microns, measured on its 51515XP, and change intervals of up to 20,000 miles. WIX aims the XP line at towing, stop-and-go traffic and long highway runs, which describes a lot of TRX use.
This can suits an owner who pulls a trailer, spends weekends on dusty trails or simply wants a heavier-duty can than the standard WIX. It is a sibling of the plain 51372 that some owners also use, so make sure the box you receive says XP if that is the version you want. Confirm fitment for your truck through the fit tool or by VIN, and let the owner’s manual set your interval.
The Six TRX Filters at a Glance
Use the table to shortlist two cans, then confirm the part number against your truck.
| Filter | Number family | Media | Suits |
|---|---|---|---|
| Mopar 04884899AC | MO-899, factory part | Not stated on listing | Owners who follow the factory schedule |
| WIX 57063 | Owner-reported MO-041 twin | Synthetic blend | A larger SRT-style can |
| Mobil 1 M1-210A | MO-899 cross | Synthetic fiber blend | Long synthetic oil intervals |
| K&N HP-2010 | MO-899 cross | Synthetic blend | Easy removal with a wrench-off nut |
| FRAM Ultra XG2 | MO-899 cross | Dual-layer synthetic | Cold starts and a grippy shell |
| WIX 51372XP | MO-899 cross | Synthetic blend | Severe use and towing |
The crosses in the middle column come from TRX owner forums and parts listings rather than a Mopar catalog. That is why the best oil filter for Ram TRX service is always the one whose number you have confirmed for your own VIN, whatever the brand on the box.

Changing the Filter and Picking an Interval
Wipe the filter mount clean, smear fresh oil on the new gasket and check that the old gasket came off with the old can. Spin the new filter on by hand until the gasket touches, then follow the tightening note printed on the box. A stuck can on a hot engine is easier with the right tool, and our roundup of the oil filter wrench for each job covers cap and strap styles.
Ram trucks use an oil change indicator, and the owner’s manual sets the limits plus a severe service schedule. Towing, off-road dust, long idling and short trips all count as harder use. Our article on how often to change oil explains when to change sooner than the reminder says.

West Michigan winters add their own load. A below-zero start in Grand Rapids thickens the oil, which is when a working anti-drainback valve and the right viscosity matter most, so read our picks for motor oil that handles cold weather starts before the first hard freeze. The grade your TRX needs is printed in the manual and on the filler cap.
When a TRX Oil Change Belongs in a Shop
A fresh drip after a filter change, an oil pressure warning or a noisy cold start deserves a closer look. A doubled gasket, a cross-threaded can or a damaged mount can lose oil fast on a high-output engine.

If you would rather hand the job off, our oil change service in Creston covers foreign and domestic vehicles. We can check the number on the can your TRX is wearing and look for leaks while it is on the lift.
More Buying Guides
Frequently Asked Questions
Does the Ram TRX use the same oil filter as the 5.7 Hemi?
No. The TRX’s supercharged 6.2L uses the larger Mopar MO-899 family, part 04884899AC on 2021 to 2024 trucks, while the 5.7L Ram 1500 takes a different Mopar number. Check the old can or your VIN before buying.
Can I use a Hellcat oil filter on my TRX?
Owners report that the TRX shares its filter family with the Challenger and Charger Hellcats, so the same Mopar MO-899 or MO-041 number usually fits. Confirm it for your truck’s VIN, since part numbers can change between model years.
Is the Mopar MO-041 better than the factory MO-899?
Sellers describe the MO-041 as Mopar’s SRT filter, first built for the Viper, and many TRX owners pick it as an upgrade. The factory MO-899 is still the reference part. Either one is a sound choice when the number is confirmed for your truck.
How often should I change the oil filter on a Ram TRX?
Change it with every oil change. Follow the oil change indicator and your owner’s manual, and use the severe service schedule if you tow, run off-road or make lots of short winter trips.
Want the oil and filter done without crawling under a lifted truck? Phone our shop at 616-279-3832 on a weekday between 8am and 5pm, or request a TRX oil change on our contact page.
Working late? Our after-hours drop-off lets you leave the truck at 456 Carrier St NE, Grand Rapids, in the Creston neighborhood and pick it up once the work is finished.
