456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Cooling a Swapped V8: The Best Radiator for LS Swap Builds, by Project

best radiator for ls swap: scenic winding road through misty green hills

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

An LS V8 makes a lot of heat in a small package, and the radiator in an old truck or muscle car was never laid out for it. The best radiator for LS swap projects puts both hose necks where the LS water pump wants them, gives the steam line somewhere to go and carries a fan setup that keeps up in traffic.

Below we cover what makes a radiator swap-ready, then review six LS-specific units for C10s, A-bodies, early Camaros, Wranglers and custom builds. Each one fits particular vehicles, so check the listing against your chassis.

Quick answer

Which radiator should you use for an LS swap?

Choose an aluminum radiator made for the LS, with both hose necks on the passenger side, a steam port and a shrouded electric fan. For a custom build, the Speedway WindChill 28-inch kit covers it. C10 owners can look at Griffin’s 8-70013-LS, and 1968-1972 A-body cars have Cold-Case’s GMA546AK.

Our Quick Picks

Three quick picks: a universal kit for custom builds, a fan-equipped unit for Chevy and GMC trucks, and a direct-fit kit for 1968-1972 A-body cars. All six radiators are reviewed below; confirm your chassis and transmission before ordering.

Speedway WindChill 28x19 LS Kit product photo
Universal kit

Speedway WindChill 28×19 LS Kit

28 x 19 in · 3-row · dual 10 in fans

Radiator, shroud and fans in one box, with standard LS hose fittings.

SuitsCustom chassis and uncommon swap vehicles
View on Amazon →
Griffin 8-70013-LS product photo
C10 and trucks

Griffin 8-70013-LS

28 x 19 in core · dual fans · automatic

Truck-fit LS radiator that arrives with its fans already sorted.

SuitsSquare-body and earlier GM trucks with an automatic
View on Amazon →
Cold-Case GMA546AK product photo
A-body muscle car

Cold-Case GMA546AK

Direct fit · dual 12 in fans · TIG welded

Fan-equipped LS radiator for 1968-1972 Chevelles and their A-body cousins.

SuitsChevelle, El Camino and other 68-72 A-body swaps
View on Amazon →

Why an LS Swap Needs a Different Radiator

Older GM radiators were drawn up for a small block with the hoses on opposite sides. The LS water pump puts its inlet and outlet on the passenger side, so a stock radiator leaves you with long, kinked hoses. A swap radiator moves both necks to match.

  • Hose necks: Speedway lists standard LS sizes as 1.25 inches upper and 1.50 inches lower, so the right radiator needs no reducers.
  • Steam port: LS heads have small vents that bleed trapped air and steam, and the radiator needs a port for that line.
  • Fans: most swaps drop the belt-driven fan, so plan a shroud and electric fans.
  • Transmission cooler: an automatic needs cooler fittings; a manual does not.

Griffin’s LS swap radiator page explains why skipping the steam vent can leave hot spots in the heads. Plumb that line before the first fill.

Sizing It: Core, Rows, Passes and Fans

Engine output is the starting point. Chevrolet Performance rates engines in its LS3 crate engine lineup at up to 638 horsepower, and a built 6.2 asks far more of a radiator than a junkyard 5.3 in a light truck.

  1. Fill the opening: core area matters most, so use the widest core the core support allows.
  2. Rows: three rows of aluminum tubes is a common swap choice.
  3. Passes: a dual-pass core sends coolant across twice, which helps a narrow radiator.
  4. Shroud: a fan needs a full shroud to pull air across the whole core.

Best Radiator for LS Swap: Six Units by Project

Each radiator below is listed for particular vehicles or as a universal unit. Confirm your year, body and transmission on Amazon before you buy.

1. Speedway Motors WindChill LS Swap Radiator Kit: 28×19 Double-Pass Core with Dual 10-Inch Fans

Speedway WindChill 28x19 LS Kit product photo
Key features
  • 3-row, double-pass crossflow aluminum core
  • Two 10-inch fans rated 800 CFM each
  • Aluminum shroud sized for the 28-inch core
  • Steam port, temp sensor fitting and IFF cooler

Speedway Motors builds its WindChill line around LS conversions, and this kit is the universal version for builders who do not have a direct-fit option. It pairs a 28 by 19 inch radiator with an aluminum shroud made for that core and two 10-inch electric fans, each rated at 800 CFM. The listing says the necks use standard LS hose fittings, and the kit adds a steam port and a fitting for a temperature sensor.

The core uses three rows of aluminum tubes in a double-pass crossflow layout, so coolant crosses the radiator twice before it returns to the engine. Speedway says the core is furnace brazed and the end tanks are TIG welded, rather than sealed with epoxy. A built-in transmission cooler with standard 1/2-20 inverted flare fittings accepts the lines from an automatic, and a manual swap can simply leave those ports capped.

This kit suits a street rod, a hot rod frame or any older car without a vehicle-specific LS radiator. Because it is universal, you will need to fabricate or source brackets to mount it, so measure the core support width and the depth behind it before ordering. It is not a bolt-in replacement for any particular car.

View Speedway WindChill 28×19 LS Kit on Amazon

2. Griffin 8-70013-LS ComboUnit: LS Swap Radiator with Dual Fan Kit for 1967-1987 Chevy and GMC Trucks

Griffin 8-70013-LS product photo
Key features
  • Listed for 67-87 Sierra/Silverado, 67-91 Blazer and Suburban
  • 28 x 19 x 2.68 inch crossflow core
  • Dual electric fan kit included
  • Automatic transmission version

Griffin Thermal Products has made aluminum radiators in South Carolina since 1981, and its ComboUnit line pairs a radiator with a matching fan setup. The 8-70013-LS is the LS swap version for GM trucks: the listing names 1967-1987 Chevy and GMC Sierra and Silverado pickups, plus 1967-1991 Blazer and Suburban models. It is the version for automatic transmissions, so it is the one to look at for a C10 with a 4L60E or 4L80E behind the engine.

The crossflow core measures 28 by 19 inches and 2.68 inches thick, which fills the wide opening these trucks have. Overall size is listed at 33.25 by 18.62 by 6.49 inches with the fan kit fitted, so check the room between the core and the water pump pulley. On its LS swap page, Griffin says its LS line puts the inlet and outlet on the passenger side to suit LS water pumps, and that the radiators include a steam port provision.

Having the fans and radiator from one maker removes the guesswork on shroud fit. Manual swaps use the 8-00013-LS instead, which the listing describes as the radiator only. Neither version includes a cap, so budget for one, and confirm your truck’s year and transmission on Amazon before ordering.

View Griffin 8-70013-LS on Amazon

drone view of picturesque scenery in green mountainous terrain with narrow pathway running amidst lush tropica

3. Speedway Motors WindChill 73-87 C/K10 LS Radiator: 3-Row Aluminum Core with Built-In Transmission Cooler

Speedway WindChill C/K10 LS product photo
Key features
  • Direct fit for 1973-1987 C10 pickups with an LS
  • Correct LS inlet and outlet sizes
  • Three rows, listed at 17 percent more capacity than two
  • 1/2-20 IFF cooler ports and a 3/8 NPT accessory port

Square-body Chevy pickups are among the most popular LS swap platforms, and Speedway Motors made this WindChill radiator for that job. The listing describes it as a direct fit for 1973-1987 C10 pickups running an LS, and says the inlet and outlet are the correct LS sizes, so no adapters or custom hoses are needed. That makes it a cleaner option than a stock-style truck radiator with reducers on both hoses.

The core has three rows of cooling tubes, which Speedway says gives 17 percent more cooling capacity than a similar two-row design. A built-in transmission cooler with 1/2-20 inverted flare ports takes the lines from an automatic, and a separate 3/8-inch NPT port can hold a temperature sensor or another accessory. The finish is plain aluminum, which suits a truck where the radiator sits behind the grille and out of sight.

This listing is for the radiator, so plan the fans and shroud separately. That suits a builder who already owns a good fan setup or wants to pick a particular one. If you would rather order a complete package, the Griffin ComboUnit above includes its fans. Check that your truck is a 1973-1987 C/K model and confirm the details on Amazon before you buy.

View Speedway WindChill C/K10 LS on Amazon

4. Cold-Case GMA546AK: 68-72 A-Body LS Swap Radiator with Dual 12-Inch Fans

Cold-Case GMA546AK product photo
Key features
  • Vehicle-specific fit for 1968-1972 GM A-body
  • Dual 12-inch electric fans included
  • 100 percent TIG welded, all aluminum
  • Corrugated fins and pressure tested

Cold-Case Radiators sells a series of vehicle-specific LS swap kits, and the GMA546AK covers GM’s 1968-1972 A-body cars. That platform takes in the Chevelle and El Camino along with Pontiac, Oldsmobile and Buick models of those years, all popular for LS power. The kit pairs an aluminum radiator with two 12-inch electric fans, so the main cooling hardware arrives together.

The listing describes the radiator as 100 percent TIG welded and pressure tested, with all-aluminum construction. Corrugated fins add surface area for heat to leave the core, which helps in slow traffic when the fans are doing the work. Because it is a vehicle-specific part, it is designed to mount in the A-body’s core support rather than needing custom brackets, which saves fabrication time on a car that may already need engine mounts, headers and a fuel system sorted.

Before ordering, confirm your body style and transmission, and check whether the radiator you need has cooler fittings for an automatic. Plan the fan wiring with a relay and a proper ground to the chassis, not through the radiator itself. The kit does not suit a car with an aftermarket core support or a non-A-body chassis, so measure if your car has been modified.

View Cold-Case GMA546AK on Amazon

panoramic view outback featuring vast fields under a clear blue sky

5. Griffin CU-00009-LS ComboUnit: LS Swap Radiator and Dual Fans for 1967-1969 Camaro and Firebird

Griffin CU-00009-LS product photo
Key features
  • Listed for 67-69 Camaro and Firebird, 64-67 Chevelle
  • 22.5 x 19 x 2.68 inch crossflow core
  • Dual electric fan kit included
  • Manual transmission applications

First-generation Camaros and Firebirds have a narrower radiator opening than a pickup, which makes cooling an LS in them a tighter job. Griffin’s CU-00009-LS is the ComboUnit built for that space. The listing names 1967-1969 Camaro and Firebird models and 1964-1967 Chevelles, and it includes a dual fan kit, so the radiator and fans are matched to each other from the start.

The crossflow core measures 22.5 by 19 inches and 2.68 inches thick, with an overall size of 26.24 by 18.63 by 7.17 inches including the fans. That depth is the number to check against your water pump and accessory drive, because an LS front end can sit closer to the radiator than the original small block did. Griffin lists the unit for manual transmission applications, which suits the many first-gen swaps that run a T56 or similar gearbox.

Griffin makes its radiators in Piedmont, South Carolina, and the LS line places both hose necks on the passenger side. If your car has an automatic, ask Griffin or check the listing for a version with a transmission cooler before ordering. A cap is a separate purchase, and Griffin advises not exceeding an 18-pound cap on its radiators.

View Griffin CU-00009-LS on Amazon

6. Mishimoto MMRAD-WRAV8-87X: 3-Row Aluminum LS Swap Radiator for Jeep Wrangler YJ and TJ

Mishimoto MMRAD-WRAV8-87X product photo
Key features
  • Listed for YJ and TJ Wranglers with an LS swap
  • 3 rows, 18.2 x 17.5 inch core
  • TIG welded with high-pressure cap and magnetic drain plug
  • Mishimoto lifetime warranty

LS swaps are common in older Wranglers, and the YJ and TJ have one of the smallest radiator openings of any vehicle in this guide. Mishimoto’s MMRAD-WRAV8-87X is built for that space. The listing names YJ and TJ Wranglers with an LS swap, although the title gives 1997-2006 and the feature list gives 1987-2004, so check your year carefully against the description before ordering.

The radiator is 25.5 by 17.2 by 3.9 inches overall, with an 18.2 by 17.5 inch core that is 2 inches thick and has three rows. The inlet and outlet are listed at 1.5 and 1.8 inches, so plan your hoses around those sizes rather than standard LS truck hoses. It is TIG welded with a 0.08-inch tank wall, and it comes with a high-pressure radiator cap and a magnetic drain plug that collects metal debris from the coolant.

A small core works hard during slow trail driving, when there is little airflow, so pair it with a strong shrouded electric fan. Mishimoto backs the radiator with a lifetime warranty. It does not include fans or a shroud, and it will not suit a JK, JL or a Wrangler with a heavily modified front end.

View Mishimoto MMRAD-WRAV8-87X on Amazon

Matching a Radiator to Your Swap Project

ProjectRadiator from this listFans included
Custom chassisSpeedway WindChill 28×19 kitYes, two 10-inch
1967-1987 GM truck, automaticGriffin 8-70013-LSYes, dual fan kit
1973-1987 C10Speedway WindChill C/K10No
1968-1972 GM A-bodyCold-Case GMA546AKYes, two 12-inch
1967-1969 Camaro or Firebird, manualGriffin CU-00009-LSYes, dual fan kit
Jeep Wrangler YJ or TJMishimoto MMRAD-WRAV8-87XNo
LS swap radiators from this guide matched to common swap vehicles

If your car is not listed, a universal radiator is the usual route. Measure the opening at the core support and leave room behind the core for fans and hoses before choosing a width.

picturesque road through the trees

Truck and car LS engines use different accessory drive heights, so settle the drive setup first and buy the radiator to match. If the pump on a junkyard engine is tired, our water pump brand guide compares replacements.

Coolant, Caps and West Michigan Weather

Griffin’s engineers recommend a 50/50 mix of antifreeze and distilled water for street cars, which also gives the freeze protection a Grand Rapids winter demands. Our coolant guide for Chevy engines covers which coolant suits an LS.

  • Pressure cap: each pound of pressure raises the boiling point by about 3°F, so use the rating your radiator maker specifies.
  • Ground the fans: stray current through aluminum causes pinhole leaks, so never ground fans through the radiator mounts.
  • Rinse the fins: road salt and summer bugs pack into a fine core, so rinse it gently from the engine side.
aerial view of a winding road through a lush

Safety note: never open a hot radiator cap. Let the engine cool, wear eye protection and keep hands clear of electric fans, which can start with the engine off.

When the Gauge or the Dash Light Says Otherwise

Even the best radiator for LS swap builds cannot fix a wiring or tuning problem. If the gauge disagrees with the engine computer, suspect the sender, its wiring or a gauge adapter first. Griffin advises checking coolant level, the thermostat, trapped air and the fans before buying a bigger radiator.

tranquil rural scene with a bare tree-lined road and open countryside under a clear blue sky

A faulty coolant temperature sensor can skew fueling, and our guide to a car that hesitates when accelerating lists other causes. If a light comes on but the engine feels fine, read about a check engine light with a car that runs normally. Our check engine light diagnostics in Grand Rapids read stored codes and live data, including the coolant temperature the computer sees.

Frequently Asked Questions

What is the best radiator for LS swap C10 trucks?

With an automatic, Griffin’s 8-70013-LS fits 1967-1987 Chevy and GMC trucks and includes fans. The Speedway WindChill C/K10 is listed for 1973-1987 C10s with a transmission cooler, but you add your own fans.

Do I really need an LS-specific radiator?

It saves a lot of work. Both hose necks sit on the passenger side and a steam port is built in, so you avoid adapters and spliced steam lines.

Is a 3-row radiator enough for a 5.3 or 6.0 swap?

For most street builds, yes, if the core fills the opening and the fans are shrouded. Boosted engines and vehicles that tow may need more.

Swap running warm or throwing codes you can’t sort out? Phone 456 AutoFix at 616-279-3832 between 8am and 5pm on weekdays, or request a diagnostic visit through our contact page.

If the project only moves after work, roll it into our after-hours drop-off at 456 Carrier St NE, Grand Rapids, MI 49505, and leave a note on what the temperature gauge has been reading.