456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

RX, ES, NX or IS? Choosing the Best Struts for Lexus by Model

best struts for lexus: rainy road seen from the driver's seat

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A Lexus is supposed to glide, so worn struts show up fast: the nose dips hard under braking, the body keeps moving after a dip, and the cabin picks up thumps it never used to. The best struts for Lexus models bring that composure back, but only when the part matches your model, generation, drivetrain and corner.

This guide covers the four Lexus families we see most often, the RX, ES, NX and IS, and reviews six Amazon listings that each name the Lexus they are built for. If you are still deciding whether the struts are the problem, our walkthrough on how to tell if struts are bad is a good first stop.

Quick answer

What struts should you buy for a Lexus RX, ES, NX or IS?

Pick an OE-style replacement built for your exact model: a complete assembly such as Unity, Monroe Quick-Strut or KYB Strut-Plus if the springs and mounts are tired, or a bare KYB Excel-G or Gabriel Ultra strut if they are sound. Confirm year, drivetrain, suspension package and corner before ordering.

Our Quick Picks

Three quick picks: a complete front corner for the RX350, a ready-to-fit assembly for the ES350 and a twin-tube strut for the rear-drive IS. All six listings are reviewed below.

Unity 11627 product photo
RX350 pick

Unity 11627

Complete front left assembly · 2010-2015 RX350

A ready-to-bolt-in front corner for the third-generation RX350.

SuitsRX owners replacing tired springs and mounts together
View on Amazon →
Monroe Quick-Strut 272307 product photo
ES350 pick

Monroe Quick-Strut 272307

Complete assembly · 2007-2012 ES350

A fully assembled corner for the fifth-generation ES350.

SuitsES owners who want a one-piece corner swap
View on Amazon →
Gabriel Ultra G51920 product photo
IS RWD pick

Gabriel Ultra G51920

Front left bare strut · 2006-2015 IS250/IS350 RWD

A twin-tube replacement strut for the rear-drive IS sedan.

SuitsIS250 and IS350 RWD owners
View on Amazon →

How Lexus Strut Setups Change by Model

Lexus shares platforms with Toyota, yet struts stay specific to each model and generation. Here is what to expect from each family:

  • RX: MacPherson struts up front. The 2010-2015 and 2016-2022 generations use different parts, and some versions came with air or sport suspension that standard listings exclude.
  • ES: struts at all four corners on the common 2007-2012 and 2013-2018 generations, with front parts often sold by side.
  • NX: front struts are shared by the NX200t, NX300 and NX300h in many listings, but cars with Adaptive Variable Suspension need a different part.
  • IS: rear-drive and all-wheel-drive versions use different front struts, so the drivetrain matters as much as the year.

Whatever the model, replace struts in axle pairs so the car does not lean or brake unevenly.

Matching a Strut to Your Exact Lexus

Even the best struts for Lexus cars ride badly if they are the wrong part. Treat a listing title as a starting filter, then enter your vehicle in the Amazon fit checker and read the qualifier notes with this list:

  1. Model year and model code (RX350, RX450h, ES350, ES300h and so on).
  2. Drivetrain: front-wheel, all-wheel or rear-wheel drive.
  3. Suspension package: standard, F Sport, air or Adaptive Variable Suspension.
  4. Corner: front or rear, then left or right.

The part number on your old strut, or the Lexus number a listing replaces, is the strongest cross-check. Electronically adjusted dampers are not a direct swap for a conventional strut. Driving something other than a Lexus? See our guide to the best shocks and struts for daily drivers.

Best Struts for Lexus: Six Listings Matched to RX, ES, IS and NX

Each pick below is a specific Amazon US listing for the Lexus it names. If your model year or corner is different, look for the matching part number within the same product line.

1. Unity Automotive 11627: Front Left Complete Strut Assembly for 2010-2015 Lexus RX350

Unity 11627 product photo
Key features
  • Front left corner for the 2010-2015 RX350
  • Top mount, bearing plate and coil spring included
  • Bumper and insulators preassembled
  • No spring compressor needed to install

The third-generation RX350 is one of the most common Lexus SUVs still on the road with original front struts. This Unity Automotive listing, part number 11627, is a complete front left strut assembly, and its title names the 2010 to 2015 Lexus RX350. Because the whole corner arrives as one unit, it replaces the damper, spring and upper mount in a single swap.

Unity lists the top mount, bearing plate, bumper, insulators and coil spring as part of the preassembled unit. The maker says the assembly restores factory ride height and gives a stable, comfortable ride, and that the design removes the need for specialty tools. For a home mechanic, skipping the spring compressor is the main practical benefit, and new mounts and bearings also help with the creaks and steering notchiness that older RX front ends can develop.

This part covers the left side only, so you will need the matching right-hand Unity assembly to do the front axle as a pair. If your RX has air or adaptive suspension, make sure the fit notes cover it before ordering. Confirm year, drivetrain and trim with the Amazon fit checker, and plan on a wheel alignment once both sides are in.

View Unity 11627 on Amazon

2. KYB Excel-G 339281: Twin-Tube Gas Strut Calibrated for the Lexus RX

KYB Excel-G 339281 product photo
Key features
  • Calibrated for the Lexus RX
  • Seamless working cylinder, Teflon piston band
  • Triple chrome plated piston rod
  • Multi-lip oil seals

Excel-G is the KYB line built to restore original handling on everyday cars and crossovers, and this listing, part number 339281, says it is specifically calibrated for the Lexus RX. The title lists the numbers it replaces, including Lexus and Toyota 48510-80530, 48510-80616 and 48510B9810 plus Monroe 72483, which makes matching it to the strut on your car straightforward.

KYB describes a seamless working cylinder paired with a Teflon-coated piston band for a positive seal and longer life. The piston rod is triple chrome plated, and multi-lip oil seals are meant to reduce wear, while solid mounting eye rings and bushings help prevent rattles. For an RX that still has healthy coil springs and upper mounts, a bare strut like this keeps the parts count down and brings back the controlled, quiet ride the car had when new.

As a bare strut, it reuses your existing spring, mount and dust boot, so the spring must be compressed to move them across. That makes it a better match for a shop install or an experienced home mechanic with the right tools. The title gives no model years or side, so check the replaced part numbers and run your RX through the Amazon fit checker first.

View KYB Excel-G 339281 on Amazon

road under orange autumn trees

3. Monroe Quick-Strut 272307: Strut and Coil Spring Assembly for 2007-2012 Lexus ES350

Monroe Quick-Strut 272307 product photo
Key features
  • Fits 2007-2012 Lexus ES350 per listing
  • Strut, spring and upper mount preassembled
  • Coil spring calibrated to restore ride height
  • Rust-resistant protective coating

The fifth-generation ES350 shares much of its chassis with the Camry and Avalon of the same years, and this Monroe Quick-Strut, part number 272307, lists the 2007 to 2012 Lexus ES350 along with those Toyota models as compatible applications. Quick-Strut is the Monroe line that bundles the strut, coil spring and upper mount into one fully assembled unit.

Monroe says each application-specific coil spring is calibrated to restore ride height and carry the weight of the car, and the premium upper mount is meant to bring back smooth steering and cut noise and memory steer. The listing also mentions a protective coating backed by salt spray testing, which is welcome on a car that spends its winters on brined roads. Because everything comes assembled, no spring compressor is needed during installation.

The listing title does not state the corner, and ES front struts are often sided, so read the fit notes in the Amazon Confirmed Fit bar before buying and order the matching unit for the other side. It suits stock ES350s rather than lowered or modified cars. Plan on an alignment after any front strut replacement.

View Monroe Quick-Strut 272307 on Amazon

4. KYB Strut-Plus SR4642: Complete Corner Assembly with Excel-G Strut for Lexus ES350

KYB Strut-Plus SR4642 product photo
Key features
  • Designed for the Lexus ES350
  • Excel-G strut with KYB matched spring
  • Mount and spring preassembled
  • Application-specific damping valves

Strut-Plus is KYB’s complete corner unit, and this listing, part number SR4642, says it is designed for proper ride height and original handling on the Lexus ES350. Inside the assembly is a KYB Excel-G strut, so you get the same damping line many owners already trust, bundled with a new spring and mount.

KYB pairs the strut with an application-engineered spring meant to match the damper, hold ride height longer and control weight without hurting ride quality. The listing also points to a stronger steel outer shell and precision damping valves designed for this application. Since the unit arrives pre-assembled, it removes the spring-compressor step and replaces every wearing part of the corner at once, which suits a high-mileage ES that has started to float or clunk over broken pavement.

The title does not give model years or the corner, and KYB sells several Strut-Plus numbers for different ES350 generations and positions. Check the listing details and the Amazon fit checker carefully against your car, and buy the matching unit for the opposite side. Once both sides are in, an alignment should follow, since the front geometry changes whenever a strut comes out.

View KYB Strut-Plus SR4642 on Amazon

sedan driving through a wet city at night

5. Gabriel Ultra G51920: Front Left Twin-Tube Strut for 2006-2015 Lexus IS250 and IS350 RWD

Gabriel Ultra G51920 product photo
Key features
  • Front left for 2006-2015 IS250 and IS350 RWD
  • Twin-tube premium OE replacement design
  • 4.01 in stroke, 20.9 in extended length
  • Bolt-on fit with listed interchange numbers

The IS250 and IS350 are the sport sedans of the Lexus range, and the rear-drive and all-wheel-drive versions use different front struts. This Gabriel Ultra listing, part number G51920, is a front left strut, and its title names the 2006 to 2015 Lexus IS250 RWD and IS350 RWD. Ultra is the Gabriel line positioned as a premium OE replacement.

Gabriel describes a precision-engineered twin-tube design and premium damping technology aimed at smooth handling and ride comfort. The listing gives a stroke of 4.01 inches, an extended length of 20.9 inches and a collapsed length of 16.88 inches, along with a long list of interchange numbers that help you cross-check against the part on your car. Those figures are useful for confirming a match before the old strut comes off.

This is a bare strut, so the spring, upper mount and boot transfer from your old unit with a spring compressor, which is a job for a shop or a well-equipped home mechanic. It fits the left side only and does not cover AWD cars. Order the right-side part for a matched pair, and confirm year and drivetrain with the Amazon fit checker first.

View Gabriel Ultra G51920 on Amazon

6. A-Premium Front Complete Strut Assemblies: Pair for 2015-2021 Lexus NX200t, NX300 and NX300h

A-Premium NX front struts product photo
Key features
  • Front pair for NX200t, NX300 and NX300h
  • Gas twin-tube struts with coil springs
  • Excludes Adaptive Variable Suspension
  • 22.44 in extended length

Fewer name-brand struts are listed for the first-generation NX, so this A-Premium set fills that gap. The listing is a pair of front complete strut assemblies with coil springs, and its fitment names the 2015 to 2017 NX200t, the 2018 to 2021 NX300 and the 2015 to 2021 NX300h, with base and some luxury trims called out. It is the only pick in this list aimed at the compact NX crossover.

A-Premium lists gas-charged, double-tube struts with an extended length of 22.44 inches and OEM-matched mounting holes. The maker says the struts are built from cold-rolled carbon steel with a corrosion-resistant cylinder, intended to restore ride height, damping and handling stability. Because both front corners come in one box as complete assemblies, you replace the axle as a pair without having to compress springs, which keeps a driveway install simpler.

The fitment notes exclude cars with variable suspension, so an NX with Adaptive Variable Suspension needs a different part. A-Premium is a value-oriented brand rather than an original equipment supplier, which suits owners who want a straightforward refresh. Check the trim notes and the Amazon fit checker against your NX, and schedule an alignment afterward.

View A-Premium NX front struts on Amazon

Comparing the Six by Model and Type

When narrowing down the best struts for Lexus models, the type column matters most, because it decides how much of the old corner you reuse.

ListingLexus namedTypeWatch for
Unity 116272010-2015 RX350, front leftComplete assemblyRight side is a separate part
KYB Excel-G 339281Lexus RX, per listingBare strutNo years in title; match the replaced Lexus number
Monroe Quick-Strut 2723072007-2012 ES350Complete assemblyCheck the corner in the fit notes
KYB Strut-Plus SR4642Lexus ES350, per listingComplete assemblyNo years in title; confirm generation
Gabriel Ultra G519202006-2015 IS250 and IS350 RWD, front leftBare strutNot for AWD cars; needs a spring compressor
A-Premium front pair2015-2021 NX200t, NX300, NX300hComplete assemblyExcludes variable suspension
Lexus strut listings compared by model, position and type

On a car past 100,000 miles, a complete assembly is often the better value, since the upper mount, bearing and spring have aged alongside the damper. KYB makes a similar point about its strut kits, noting that strut fluid has passed through the valves more than 75 million times by 80,000 km and that the dust boot and bump stop deserve replacing at the same visit.

workbench covered in old tools

Michigan Roads and Lexus Front Ends

West Michigan winters test the parts that hold a strut in place. Brine and road salt work into the spring seats, the upper mount studs and the bolts that clamp the strut to the knuckle. Then the spring thaw opens potholes that hit a tired strut harder than a healthy one.

That is why many local owners looking for the best struts for Lexus SUVs lean toward complete assemblies with new seats and hardware. A squeak over speed bumps may be a dry mount or sway bar bushing instead, and our guide on why a car squeaks when going over bumps helps you sort them out.

black and white photo of garage doors

After a hard hit, look for a low corner, a new pull or oil on a strut body. Our list of pothole damage signs covers the other parts worth a look.

Driveway Job or Shop Job?

Bolting in a complete assembly on an ES or RX is manageable at home with sturdy jack stands, a torque wrench and a free afternoon. A bare strut is another matter. The coil spring has to be compressed before the top nut comes off, and a spring that slips can cause serious injury, so read our guide to picking a coil spring compressor before you try it.

Rusted knuckle bolts and the alignment every front strut job needs are other reasons to hand it over. For a knock rather than a squeak, our breakdown of a clunking noise over bumps lists the usual suspects.

highway light trails at sunset

Our suspension repair in Grand Rapids covers struts, shocks, mounts and the steering parts around them on Lexus models and other foreign and domestic vehicles. Owner and head mechanic Hendrick Hoffman is ASE and State of Michigan certified in steering and suspension, which covers strut work on a Lexus.

Frequently Asked Questions

What are the best struts for a Lexus RX350?

For a 2010-2015 RX350, the Unity 11627 is a complete front assembly that replaces the spring and mount too, while the KYB Excel-G 339281 is a bare strut calibrated for the RX. Check the fit notes for air or sport suspension before you buy.

Are aftermarket struts as good as Lexus OEM struts?

OE-style lines such as KYB Excel-G and Monroe Quick-Strut are designed to restore the factory ride height and handling. They will not match every detail of a Lexus part, but they suit a stock daily driver well. Cars with adaptive or air suspension may need the factory part.

Do IS250 AWD and RWD models use the same struts?

No. The front suspension differs between the two, so the struts have different part numbers. The Gabriel Ultra G51920, for example, lists only rear-wheel-drive IS250 and IS350 models.

Does a Lexus need an alignment after new struts?

After front struts, yes. The strut sets the top of the wheel’s position, so taking it out can shift camber and toe. An alignment protects the tires and keeps the steering straight.

Is your Lexus floating over dips or thumping at the front end? Call 456 AutoFix at 616-279-3832 on weekdays from 8am to 5pm, or schedule a strut and suspension check through our contact page.

Can’t get away while we are open? Park the Lexus at 456 Carrier St NE, Grand Rapids, MI 49505 and leave the keys in our after-hours drop-off.