As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A half-ton GMC rarely announces tired front struts with one loud noise. Instead the nose drifts after a highway expansion joint, the truck dips hard at every stop sign and the front tires start wearing in patches. Finding the best struts for GMC Sierra 1500 trucks comes down to two questions: which generation sits in your driveway, and what height and ride you want afterward.
This guide covers front strut listings for the 2007 to 2013, 2014 to 2018 and 2019 and later Sierra 1500, including notes for AT4, AT4X and Denali owners. Shopping for a sedan or SUV rather than a pickup? Our guide to shocks and struts for daily drivers covers those vehicles.
Quick answer
What front struts suit a GMC Sierra 1500?
Start with the model year. A 2014 to 2018 truck that needs a slight level does well with the Bilstein B8 5100 pair, a 2007 to 2013 truck gets a bolt-in fix from the Monroe Quick-Strut 139105, and a 2019 or later Sierra can level 2 inches with Rough Country’s loaded N3 struts.
Our Quick Picks
Three quick picks, one per generation: a leveling Bilstein pair for 2014 to 2018, a loaded Monroe for 2007 to 2013 and a 2-inch Rough Country set for 2019 and later. All six listings are covered below.

Bilstein B8 5100 Front Pair
Adjustable-height monotube struts for trucks that need a mild level.

Monroe Quick-Strut 139105
A complete OE-style corner that restores factory ride height.

Rough Country N3 Leveling Struts
Bolt-on loaded struts that raise the front 2 inches.
Know Your Sierra Before You Order Struts
The Sierra 1500 has used a coilover strut at each front corner since the 2007 redesign, while the rear rides on leaf springs and conventional shocks. That makes a strut purchase a front-axle job. It also means the strut, spring and upper mount work as one unit, so the listing has to match your generation.
- 2007 to 2013: the first coilover Sierra. The carry-over 2007 “Classic” body is an older design and needs different parts.
- 2014 to 2018: revised mounts and springs. The 2019 Sierra 1500 Limited kept this front end.
- 2019 and later: the current platform, with the most trim-specific suspension hardware.
Trim matters most on the newest trucks. GMC’s Sierra 1500 lineup page lists a 2-inch factory lift with monotube shocks on the AT4, Multimatic DSSV dampers on the AT4X and Adaptive Ride Control on the Denali. Many aftermarket listings exclude those setups, so check the trim notes before you buy.
Complete Strut Assembly or Bare Damper?
Sierra struts come in two forms, and your choice changes how the job goes more than the brand you pick.
- Complete (loaded) assembly: strut, coil spring and top mount come bolted together. You swap the whole corner and renew a sagging spring along the way.
- Bare strut: just the damper. The factory spring has to be compressed, removed and fitted onto the new strut before it goes back in.
A half-ton front spring carries a lot of force, so look over our guide to choosing a coil spring compressor for strut jobs before you take a bare strut apart. Whichever type you buy, do both front corners at once so the truck sits and steers evenly.
Best Struts for GMC Sierra 1500: Six Listings Reviewed
Each of the six front struts below names its Sierra years in the Amazon listing. No single part covers every cab, drive type and trim, so run your truck through Amazon’s fit checker and read the qualifier notes before ordering.
1. Bilstein B8 5100: Ride Height Adjustable Front Pair for 2014-2018 Silverado/Sierra 1500

- Listed for 2014-2018 Silverado/Sierra 1500
- 0 to 1.85 inches of front lift
- Snap-ring grooves set the spring perch
- Zinc-plated body against corrosion
This Bilstein B8 5100 listing is a front pair for the 2014 to 2018 Silverado 1500 and Sierra 1500, the generation many Grand Rapids owners are now refreshing at high mileage. It is a ride height adjustable design, and the listing gives a range of zero to 1.85 inches of front lift. That makes it a common choice for owners who want the front to sit closer to level with the bed.
Height is set with an adjustable spring perch that has several snap-ring grooves, so you pick a position before the spring goes on. Bilstein says each application is tuned through road testing for steering precision and control under changing loads. The body is zinc plated, which the listing ties to rust resistance in road salt, and the line carries a limited lifetime warranty.
These are bare struts, so the factory coil spring and top mount must be moved over with a suitable compressor, or by a shop. Expect a firmer feel than the original parts, and plan on an alignment once the truck sits at its new height. If you want a stock-height, softer ride, a loaded OE-style assembly suits you better.
View Bilstein B8 5100 Front Pair on Amazon
2. Monroe Quick-Strut 139105: Front Strut and Coil Spring Assembly for 2007-2013 Sierra 1500

- Listed for 2007-2013 Sierra and Silverado 1500
- Strut, spring and mount preassembled
- No spring compressor needed
- Protective coating against rust
Monroe’s Quick-Strut 139105 is a loaded front assembly listed for the 2007 to 2013 Sierra 1500 and the matching Silverado 1500. It arrives with the strut, an application-specific coil spring and the upper mount already put together. Because there is nothing to disassemble, the job does not call for a spring compressor, which is the main reason home mechanics pick a loaded unit.
Monroe says the spring is calibrated to the original design to bring back factory ride height, which helps when an older truck has started to sag in front. The listing also mentions an upper mount meant to restore smooth steering and cut noise, plus a protective coating backed by salt spray testing. For a high-mileage truck that sees Michigan winters, renewing spring, mount and damper together is practical.
The assembly is sold one per corner, so order two to replace the front axle as a pair. It is built for stock height, not leveling or lift. Check the Amazon fit bar with your year, cab, drive and trim, and read any qualifier notes, since Monroe asks buyers to confirm before ordering.
View Monroe Quick-Strut 139105 on Amazon

3. Rough Country N3 501065: 2″ Loaded Leveling Struts for 2019-2025 Chevy/GMC 1500

- Listed for 2019-2025 Chevy/GMC 1500
- 2 inches of front leveling
- Pre-loaded coil spring, bolt-on design
- Nitrogen gas charged, chromed rod
Rough Country’s N3 501065 is a set of loaded leveling struts listed for 2019 to 2025 Chevy and GMC 1500 trucks, which covers the current Sierra 1500. Each strut comes with its coil spring already installed, and the listing gives 2 inches of front lift. That combination levels the truck without separate strut spacers and without taking the factory assembly apart.
The struts are nitrogen gas charged, which Rough Country says improves ride and reduces oil aeration, and they use a hardened chrome piston rod with a leak-resistant seal. The bolt-on format makes this one of the simpler ways to change a Sierra’s stance in a driveway, since you remove the old corner and install the new one as a unit. Rough Country backs this listing with a limited 3-year warranty.
Leveling the front changes the suspension angles, so an alignment is part of the job, and taller tires may need checking for clearance. Trucks that already carry a factory lift, such as the AT4, or electronic damping need a part listed for them. Confirm your trim, drive type and suspension in Amazon’s fit checker before buying.
View Rough Country N3 Leveling Struts on Amazon
4. FOX 2.0 Coilover IFP 985-02-134: Front Coilovers for 2019-2026 Silverado/Sierra 1500 with 0-2″ Lift

- Listed for 2019-2026 Silverado/Sierra 1500
- For 0 to 2 inches of lift
- 6061-T6 aluminum one-piece body
- 5/8-inch hard chrome steel shaft
This FOX 2.0 Coilover IFP, part number 985-02-134, is sold through BDS and listed for 2019 to 2026 Silverado and Sierra 1500 trucks running zero to 2 inches of lift. It replaces the factory front strut with a performance coilover, giving a Sierra owner a step up in hardware for gravel roads, two-tracks and the occasional trail without moving to a full lift kit.
The body is a one-piece, 2-inch, 6061-T6 aluminum tube that is impact extruded, CNC machined and clear anodized, which the listing says resists rust over time. Inside are a 5/8-inch hard chrome plated alloy steel shaft, a high-flow piston and an internal floating piston monotube design. FOX describes the valving as specific to this application rather than a one-size tune.
This is a performance part, not an OE-style refresh, and it suits trucks that spend some of their time off pavement. A daily driver that never leaves the road gets less from it. Check how the listing handles springs and lift setting, confirm your trim in the fit checker, and budget for a front-end alignment afterward, as with any strut swap.
View FOX 2.0 Coilover 985-02-134 on Amazon

5. Bilstein B6 4600: Front Monotube Pair for 2007-2013 Silverado/Sierra 1500 at Stock Height

- Listed for 2007-2013 Silverado/Sierra 1500
- Factory height, 0 inch front lift
- Digressive, velocity-sensitive valving
- Not for electronic suspension
The Bilstein B6 4600 is the brand’s replacement-height truck line, and this listing is a front pair for 2007 to 2013 Silverado and Sierra 1500 trucks at stock height. It excludes trucks with electronic suspension, so confirm that your Sierra has conventional struts before you order. For an owner who likes the factory stance but wants the front end tied down better, it fits the brief.
Bilstein uses digressive, velocity-sensitive valving that responds to how quickly the suspension is moving, which the maker says gives a smooth but controlled ride on both pavement and broken roads. The listing notes vulcanized neoprene bushings built for heavy loads and rough use, and each application is tuned through road testing. A limited lifetime warranty covers the series.
As a bare strut, it needs the factory spring and mount moved over, which means a proper truck-rated compressor or a shop doing the transfer. The ride is usually firmer than a worn original, which some owners like when towing a boat or camper. If you want to raise the front, look at a height adjustable strut instead.
View Bilstein B6 4600 Front Pair on Amazon
6. Monroe OESpectrum 39105: Monotube Front Strut for 2007-2013 Sierra 1500 and Silverado 1500

- Listed for 2007-2013 Sierra 1500
- Monotube design, nitrogen gas charged
- PTFE-banded piston
- All-weather OE-style fluid
Monroe’s OESpectrum 39105 is a bare front strut listed for the 2007 to 2013 Sierra 1500, along with the Silverado 1500, Cheyenne and some 2500 models of those years. It is meant to replace the factory damper at stock height on trucks originally fitted with monotube struts. Since it is only the damper, it makes sense when your springs and top mounts are still in good condition.
Monroe lists full displaced valving tuned to each vehicle, a larger bore for damping control and a high-pressure nitrogen charge that keeps tires in contact with the road. A PTFE-banded piston seals against the pressure tube, and the all-weather fluid carries additives for temperature swings, which matters when a January cold start follows a humid July. Monroe’s limited lifetime warranty applies.
Fitting it means compressing the factory spring and rebuilding the assembly, so plan for the right tools or shop labor. It is sold singly, so buy one for each front corner. Enter your full vehicle details in the fit checker and read the qualifier notes, because cab, drive type and trim can change the part number.
View Monroe OESpectrum 39105 on Amazon
Matching a Strut to Your Truck and Ride Height
Use this table to shortlist a part, then confirm the exact number against your VIN.
| Your Sierra 1500 | Listing to check | Type | Watch for |
|---|---|---|---|
| 2014 to 2018, mild level wanted | Bilstein B8 5100 front pair | Bare, adjustable perch | Firmer ride; align after |
| 2007 to 2013, quick bolt-in repair | Monroe Quick-Strut 139105 | Loaded | Sold per corner; buy two |
| 2019 and later, 2-inch level | Rough Country N3 501065 | Loaded, leveling | Check trim exclusions |
| 2019 and later, trail use | FOX 2.0 coilover 985-02-134 | Coilover pair | Set up for 0 to 2 inches of lift |
| 2007 to 2013, factory height, firmer control | Bilstein B6 4600 front pair | Bare monotube | No electronic suspension |
| 2007 to 2013, stock replacement | Monroe OESpectrum 39105 | Bare monotube | Spring transfer needed |

Not every noise up front means a strut has failed. A squeak or groan over speed bumps is often a dry sway bar bushing or end link, and our article on why a car squeaks when going over bumps helps you sort those out first. Rear shocks are a separate purchase, but if they are as old as the fronts, replacing them in the same visit keeps the truck balanced.
Grand Rapids Winters and the Sierra Front End
West Michigan’s freeze-thaw season punishes a pickup’s front suspension. Each pothole slams the strut toward the end of its travel, and a Sierra that plows a driveway or pulls a trailer takes those hits with extra weight on the nose. Seals eventually give up, and the front starts to bob and float.
Look for oily film on the strut body, a slow settle after dips, uneven front tire wear or a nose that dives under braking. Our walkthrough on how to tell if struts are bad explains each sign, and the pothole damage signs checklist is worth a read after a hard winter hit.

Road salt also adds time to the job. Lower strut bolts can seize in the knuckle and top mount studs corrode, so spray the hardware with penetrating oil the night before and keep fresh nuts on the bench. Even the best struts for GMC Sierra 1500 trucks are only as good as the hardware holding them in.
Installing Sierra Struts Safely, Then Aligning
Swapping a loaded strut on a Sierra 1500 is a reasonable home job with a good floor jack, jack stands and time. A bare strut is different, because the spring transfer is the risky part. If you do not own a compressor rated for truck springs, let a shop handle that step.
Book an alignment either way. Monroe’s tech tip on alignment after strut replacement notes that new struts can change camber, toe and caster, which pulls the truck and wears tires early.

Prefer to skip the seized bolts? Our Grand Rapids suspension repair service handles struts, shocks, mounts and the steering parts connected to them. Hendrick Hoffman, who runs our shop, carries ASE and State of Michigan certification in steering and suspension, as our about us page details.
More Buying Guides
Frequently Asked Questions
Do Silverado 1500 struts fit a GMC Sierra 1500?
Usually, yes. The two trucks share their front suspension within each generation, and most listings name both. Trim packages still differ, so confirm your exact Sierra in the fit checker before ordering.
Can I put aftermarket struts on a Sierra AT4?
Only parts listed for it. The AT4 leaves the factory with a 2-inch lift and monotube shocks, and many stock-height listings exclude it. Look for a listing that names the AT4 or its off-road package.
Will leveling struts change how my Sierra rides?
Some change is normal. Raising the front shifts the suspension geometry, and a firmer valved strut like the Bilstein 5100 feels tighter than stock. An alignment afterward keeps the steering straight and the tires wearing evenly.
How do I know if my Sierra has electronic suspension?
Check the trim and the window sticker. Denali trucks list Adaptive Ride Control, and electronically damped struts have a wiring connector near the top. If yours has one, buy only parts listed for that system.
Is your Sierra wandering, bouncing or clunking over Grand Rapids pavement? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or ask for a Sierra front-end inspection through our contact page.
Tied up at your own job during our hours? Drive the truck to 456 Carrier St NE in Grand Rapids any evening and leave it with our after-hours drop-off.
