456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Bike Rack, Kayak or Utility Trailer? Best Trailer Hitch for Ford Maverick

best trailer hitch for ford maverick: tranquil countryside scene with a lone tree in a grassy field at sunset

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A lot of Mavericks leave the dealer lot with an open bed and no receiver under the bumper. The best trailer hitch for Ford Maverick owners in that spot is a bolt-on 2 inch receiver listed for your model year and trim, with ratings you never have to lean on past what Ford allows.

Below we cover whether your truck needs one, what hitch ratings mean, then six Class 3 receivers sold on Amazon. If a wide trailer ends up behind the truck, our guide to tow mirrors covers seeing past it.

Quick answer

Which hitch should a Ford Maverick get?

If your Maverick has no factory receiver, choose a 2 inch Class 3 bolt-on listed for your year. The CURT 13504 covers 2022 to 2025 trucks with a concealed cross tube, and the APS and Nilight listings extend to 2026. Ford’s tow rating in your owner’s manual still sets the limit.

Our Quick Picks

Three bolt-on receivers that cover most Maverick owners: a name-brand concealed hitch, a fully tested budget option and a salt-season coating pick.

CURT 13504 product photo
Name-brand pick

CURT 13504

Class 3, 2 in, 4,000 lb / 600 lb

Concealed bolt-on hitch from an established maker, sized for 2022 to 2025 trucks.

Suits2022 to 2025 Mavericks towing light trailers
View on Amazon →
APS Class 3 Hitch product photo
Tested bolt-on

APS Class 3 Hitch

Class 3, 2 in, SAE J684

Bolt-on receiver with full hardware and a fit range that reaches the 2026 truck.

SuitsOwners of any 2022 to 2026 Maverick
View on Amazon →
Nilight Class 3 Hitch product photo
Salt-season coating

Nilight Class 3 Hitch

Class 3, 2 in, galvanized + powder coat

Electro-galvanized base under powder coat for trucks that live on salted roads.

SuitsMavericks parked outside through winter
View on Amazon →

Start With the Factory Receiver Question

Look under the rear bumper before you shop. Some Mavericks were built with Ford’s own receiver, usually as part of a towing package, and every aftermarket hitch in this guide is listed as excluding trucks that already have one. If yours does, you only need a ball mount, rack or carrier.

If the space is empty, the year range on the listing is your next filter. Some brands list 2022 to 2025, others 2022 to 2026, and trim packages can change the rear fascia and trim pieces around the mounting points. Confirm year, trim and powertrain on the Amazon fit checker before you order.

  • Bolt-on install: all six listings below say no drilling, using factory holes or frame points behind the bumper.
  • Hybrid or EcoBoost: the receiver bolts to the body the same way, but Ford’s tow rating can differ by powertrain and package.

Hitch Ratings vs the Maverick’s Own Limit

Most Maverick receivers list about 4,000 lb gross trailer weight (GTW) and 600 lb tongue weight (TW). Those figures describe the steel hitch only. They don’t change what Ford says the truck can pull or carry on its rear.

Your working limit is the lowest of the hitch rating, the ball mount and ball rating, and the truck’s rating in the owner’s manual and on the hitch placard. The Trailer Safety Week towing guide from the National Association of Trailer Manufacturers puts it simply: the vehicle maker’s tow rating is the maximum loaded trailer weight, and the trailer’s GVWR should never exceed it.

Best Trailer Hitch for Ford Maverick: Six Receivers Reviewed

One of these comes from an established hitch maker, and five are bolt-on receivers from newer brands with near-identical ratings. They differ in year coverage, coating and included hardware.

1. CURT 13504: Class 3 2 Inch Receiver for 2022-2025 Maverick, Concealed Cross Tube

CURT 13504 product photo
Key features
  • Listed for 2022-2025 Maverick without factory receiver
  • 4,000 lb weight carrying, 600 lb tongue weight
  • No drilling, concealed main body
  • A-coat plus black powder coat finish

The CURT 13504 is a Class 3 receiver built for 2022 to 2025 Ford Mavericks that left the factory without a receiver. CURT’s own product page lists 4,000 lb weight carrying capacity and 600 lb tongue weight, with the same 4,000 lb and 600 lb figures when used with a weight distribution setup. The main body is concealed behind the bumper, so mostly the 2 inch receiver opening shows.

CURT lists it as a no-drill install, and the hitch weighs about 33 lb. Rust protection is a liquid A-coat applied inside and out, then a black powder coat cured over it. That layered finish matters on a truck that sees salted roads for months. The warranty is a limited lifetime on the hitch, with one year on the finish and one year on parts.

This is a sound choice for owners who want a known hitch maker and a clean look from behind. It does not suit vertical hanging bike racks, which the listing rules out, so platform racks are the better match. It also doesn’t list the 2026 model year, so owners of the newest trucks should look at the other picks or confirm fit carefully before buying.

View CURT 13504 on Amazon

2. APS Class 3 Hitch: 2 Inch Receiver for 2022-2026 Maverick, SAE J684 Tested

APS Class 3 Hitch product photo
Key features
  • Listed for 2022-2026 Maverick without factory receiver
  • 4,000 lb towing, 600 lb tongue weight
  • Tested to SAE J684, exceeds V-5
  • No drilling, mounting hardware included

The APS Class 3 hitch is listed for 2022 through 2026 Ford Mavericks that don’t have the factory receiver. It carries a 4,000 lb towing rating and 600 lb tongue weight, plus matching 4,000 lb and 600 lb weight distribution figures. APS states it was tested in line with SAE J684, the standard for trailer couplings and hitches, and that it exceeds V-5 requirements.

The finish is a high-gloss black powder coat over a rust-resistant liquid coating, aimed at chipping, dust and harsh weather. APS describes the design as OE style and vehicle specific, and the listing says installation needs no drilling. All of the mounting hardware comes in the box, which saves a trip to the hardware store halfway through the job.

Because the fit range includes 2026, this receiver is a practical pick for newer trucks that some name-brand listings don’t cover yet. It suits bike racks, cargo carriers and light utility trailers within Ford’s own rating. The listing itself reminds buyers never to exceed the vehicle’s weight rating, which is good advice for any hitch here. Confirm year, trim and powertrain on Amazon’s fit checker, since a listing title alone can’t promise fit for every Maverick configuration.

View APS Class 3 Hitch on Amazon

serene gravel road weaving through lush green countryside flanked by pine trees

3. Tuxtreme Class 3 Hitch: 2 Inch Receiver for 2022-2026 Maverick, Powder Coated Carbon Steel

Tuxtreme Class 3 Hitch product photo
Key features
  • Listed for 2022-2026 Maverick without factory receiver
  • 4,000 lb GTW, 600 lb TW
  • Carbon steel, SAE J684 tested
  • Powder coat plus rust-resistant undercoat

The Tuxtreme Class 3 receiver is listed for 2022 to 2026 Ford Mavericks without the factory receiver. Its ratings are 4,000 lb gross trailer weight and 600 lb tongue weight through a standard 2 inch opening. Tuxtreme calls it an assembly-style hitch that mounts to the truck’s frame points and rear bumper structure, rather than a single welded piece.

It’s made from carbon steel and the listing says it was tested to SAE J684 and built to exceed V-5 testing. Corrosion protection comes from a multi-layer black powder coat plus a separate rust-resistant undercoating treatment. The listing describes a no-drill install on most compatible trucks, with the mounting hardware included for a DIY bolt-on.

This hitch suits owners who carry a bike rack or cargo carrier most of the year and tow a small utility trailer or kayak trailer now and then. The listing mentions small campers too, but whether your Maverick can pull one depends on Ford’s rating for your powertrain and package, not on the hitch. Because it is an assembly-style design, read the instructions before starting and confirm each bolt is torqued to spec. Check your year and trim on the Amazon fit tool before ordering.

View Tuxtreme Class 3 Hitch on Amazon

4. TULALUX Class 3 Hitch: 2 Inch Receiver for 2022-2025 Maverick, 4,000 lb GTW

TULALUX Class 3 Hitch product photo
Key features
  • Listed for 2022-2025 Maverick without factory receiver
  • 4,000 lb GTW, 600 lb TW
  • Thick steel tubing with protective coating
  • Uses factory holes, no drilling on most trucks

The TULALUX Class 3 receiver is listed for 2022 to 2025 Ford Mavericks that don’t have Ford’s receiver installed. It is rated for 4,000 lb gross trailer weight and 600 lb tongue weight, matching most of the hitches built for this truck. The 2 inch opening accepts standard ball mounts, cargo carriers and bike racks.

The listing describes thick steel tubing with a corrosion-resistant protective coating. It doesn’t detail a layered coat the way some others here do, so a salt-season owner should plan on touching up chips and keeping the receiver covered. Installation uses the truck’s factory holes, and the listing says no drilling is needed on most vehicles, with the hitch lining up to the OEM mounting points.

This is a plain, no-frills option for owners of 2022 to 2025 trucks who mainly want a place for a bike rack, cargo tray or light utility trailer. It doesn’t list the 2026 model year, so newer trucks should look elsewhere. The listing mentions small campers, but your real limit is Ford’s rating in the owner’s manual and on the placard, along with the ball mount and ball you use. Confirm year and trim before you order, and keep the install sheet for future reference.

View TULALUX Class 3 Hitch on Amazon

peaceful forest road flanked by tall trees

5. Nilight Class 3 Hitch: 2 Inch Receiver for 2022-2026 Maverick, Electro-Galvanized Base

Nilight Class 3 Hitch product photo
Key features
  • Listed for 2022-2026 Maverick without factory receiver
  • 4,000 lb towing, 600 lb tongue weight
  • Electro-galvanized base coat under powder coat
  • No drilling, all hardware included

The Nilight Class 3 hitch is listed for 2022 through 2026 Ford Mavericks that lack the factory receiver. It is rated at 4,000 lb with a 600 lb tongue weight, and the standard 2 inch by 2 inch opening takes ball mounts, bike racks, cargo carriers and tow hooks.

What sets it apart on paper is the finish. Nilight lists an electro-galvanized base coat under a heavy powder coat, and it describes laser welding on the assembly. A zinc layer under the paint gives some extra protection where the powder coat chips, which is exactly what happens to a receiver on a salted Michigan road. The listing says the install needs no drilling or modification, lines up with factory mounting points and includes all hardware.

This receiver suits owners who park outside and drive through the whole salt season, and those with a 2026 truck. It works for racks, carriers and light trailers within Ford’s rating for your powertrain. Galvanizing slows rust but doesn’t stop it, so rinse the hitch area after winter, keep the pin greased and use a receiver cover. As with every hitch here, confirm the year, trim and powertrain on Amazon before you buy.

View Nilight Class 3 Hitch on Amazon

6. T-TOP WLS Class 3 Hitch: 2 Inch Receiver for 2022-2026 Maverick, E-Coat Plus Powder Coat

T-TOP WLS Class 3 Hitch product photo
Key features
  • Listed for 2022-2026 Maverick without factory receiver
  • 4,000 lb GTW, 600 lb TW
  • Black E-coat under powder coat
  • Torque spec stated: M12 bolts to 79 ft-lb

The T-TOP WLS Class 3 receiver is listed for 2022 to 2026 Ford Mavericks, excluding trucks that came with the factory receiver. It is rated for 4,000 lb gross trailer weight and 600 lb tongue weight through a 2 inch receiver tube. The listing names ball mounts, cargo carriers, spare tire holders, bike racks, trailer steps and tow hooks as accessories it accepts.

Corrosion protection is a black E-coat with a powder coat layer over it, and the listing says it is designed with road salt, rain and mud in mind. Installation uses existing mounting points with all hardware included. The listing also states the torque value: the M12 fasteners go to 79 ft-lb, which is the kind of detail a first-time installer needs and many listings leave out.

This hitch suits owners doing their first install in the driveway, provided they have a torque wrench that reaches that value. It works well for a bike rack, a cargo tray or a light utility trailer within Ford’s rating. The listing tells buyers to check fitment before purchase, and that’s sound advice: use the Amazon fit checker with your year, trim and powertrain. Recheck the bolt torque after the first few hundred miles of use.

View T-TOP WLS Class 3 Hitch on Amazon

Matching a Hitch to How You Use the Truck

Use this table to shorten the list by model year and by what the receiver will carry most of the time, then confirm fit on the listing itself.

Your Maverick and useWhat to look forPicks from this list
2022 to 2025, light trailer or rackName-brand hitch with a concealed cross tubeCURT 13504
2026 model yearListing that names 2026 in its fit rangeAPS, Tuxtreme, Nilight, T-TOP WLS
Truck parked outside all winterLayered coating, not paint aloneNilight, T-TOP WLS, Tuxtreme
First-time DIY installAll hardware included, torque spec statedT-TOP WLS, APS
Vertical hanging bike rackCheck the hitch maker’s rack notes firstAvoid the CURT 13504
Ford Maverick hitch choices by year and use, based on what each Amazon listing and maker page states

Since these all list the same 4,000 lb and 600 lb figures, the best trailer hitch for Ford Maverick use comes down to fit, coating and hardware, while Ford’s rating decides what you can tow.

peaceful countryside scene with a winding dirt road surrounded by lush green forest and open

Salt, Pins and Wiring in West Michigan

A receiver tube hanging under a pickup collects brine and slush from the first salting until spring. Keep a cover in the opening when it’s empty, pull and grease the hitch pin a few times over winter so it doesn’t seize, and add a look at the mounting bolts to your winter car maintenance checklist.

A hitch that only carries a bike rack or cargo tray needs no wiring, as long as nothing hides your tail lights or plate. Any trailer needs working lights, and the towing guide above lists working lights and crossed safety chains among the basics. Check which connector your truck already has before buying a harness, and leave brake controller wiring to a shop if you’re unsure.

curved desert road in arid landscape with mountains and clear sky

Cold mornings are hard on a small pickup’s 12V battery too, and a dead battery at the boat launch is a long wait. Our guide to a car not starting in cold weather explains the usual causes, and a car emergency kit for winter earns its spot behind the seat when a trailer is along.

When to Have a Mechanic Check It

aerial view of a winding road and river

Trailer lights that flicker, a turn signal that dies only with the plug connected, or a new dash warning after a harness install usually points to a loose connector or a poor ground. Our car electrical repair in Grand Rapids covers tracing that kind of fault.

Regular towing also adds load to the brakes and rear suspension. If the truck squats more than it used to, wanders under load or the pedal feels softer with a trailer behind it, have the brakes inspected in Grand Rapids before the next trip.

Frequently Asked Questions

What is the best trailer hitch for Ford Maverick trucks without the factory receiver?

A 2 inch Class 3 bolt-on listed for your model year, such as the CURT 13504 for 2022 to 2025 trucks, is a sound choice. Confirm year and trim on Amazon, and stay within Ford’s tow rating.

Does a 4,000 lb hitch mean my Maverick can tow 4,000 lb?

No. The hitch rating only describes the hitch. Ford’s rating depends on powertrain and package, so check the owner’s manual and hitch placard and use the lowest number in the setup.

Do I have to drill to install a Maverick hitch?

The six listings here say no drilling is needed, using existing holes or frame points. Read the install sheet first, since some trim may need to come off for access.

Will these fit a Maverick that already has Ford’s receiver?

No. Each listing excludes trucks with the factory receiver. If yours has one, you only need a ball mount or a hitch accessory.

Bolted a receiver under your Maverick and now the trailer signals act up? Ring 456 AutoFix on 616-279-3832 any weekday between 8am and 5pm, or request a trailer wiring check on our contact page.

Need the truck for hauling all week? Unhook the trailer, bring the Maverick to 456 Carrier St NE in Creston once your day is done, and use the after-hours drop-off with a note on which lights fail and whether the trailer was connected.