456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Shopping for the Best Trailer Hitch for Subaru Crosstrek? Fit Notes and Picks

best trailer hitch for subaru crosstrek: view formations alongside a road

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A Crosstrek is a natural partner for a bike rack, a cargo tray or a small utility trailer, but Subaru has changed its rear end more than once. The best trailer hitch for Subaru Crosstrek owners is the one listed for their exact model year and trim, with ratings that respect what Subaru says the car itself can pull.

Below we sort the generations, explain hitch ratings and review six receivers from CURT, Draw-Tite and Reese. If an Outback shares your driveway, our Outback hitch guide by generation covers that wagon separately.

Quick answer

Which trailer hitch fits my Subaru Crosstrek?

Match the hitch to your model year and trim. For 2018-2023 cars, CURT 13382 is a concealed 2 inch Class 3 receiver, and Draw-Tite 36644 is a lighter 1.25 inch option listed for 2016-2024. A Crosstrek Wilderness takes CURT 13634. Whatever the hitch is rated for, the towing limit in your owner’s manual comes first.

Our Quick Picks

Three quick picks: CURT 13382 for 2018-2023 cars, Draw-Tite 36644 for light racks and CURT 13634 for the Wilderness. All six hitches are reviewed below.

CURT 13382 product photo
2018-2023 Pick

CURT 13382

Class 3 · 2 in receiver · 525 lb TW

A concealed receiver for the second-generation body.

SuitsBike racks, cargo trays and small trailers
View on Amazon →
Draw-Tite 36644 product photo
Light-Duty Pick

Draw-Tite 36644

Class 2 · 1.25 in receiver · 350 lb TW

A smaller receiver for light racks and small trailers.

SuitsOwners who carry one or two regular bikes
View on Amazon →
CURT 13634 product photo
Wilderness Pick

CURT 13634

Class 3 · 2 in receiver · 525 lb TW

Made for the Wilderness trim's own rear end.

SuitsWilderness owners towing within Subaru's rating
View on Amazon →

Which Crosstrek Do You Drive?

Subaru has sold three Crosstrek bodies in the US. Hitch makers build a separate receiver for each one, because the bumper beam, exhaust and spare-tire well sit in different places.

  • 2013-2017: sold as the XV Crosstrek through 2015, then simply the Crosstrek. CURT’s 13135 covers this body with an exposed hitch tube.
  • 2018-2023: the second generation. This body has the widest choice of receivers, including CURT 13382 and the Reese 84209, which is listed through 2021.
  • The current body: hitch makers list it separately, and the Crosstrek Wilderness, which rides higher and wears its own rear styling, gets a part number of its own.

Listings overlap at 2016 and 2017, so enter your year, trim and whether the car is a Hybrid in Amazon’s fit checker before you order. Never assume one listing covers every Crosstrek.

Hitch Ratings Versus Your Crosstrek’s Towing Limit

Gross trailer weight (GTW) is the most a loaded trailer may weigh, and tongue weight (TW) is the downward push a coupler or a loaded rack puts on the receiver. Ball mounts, pins and the car itself carry ratings too, and the lowest one sets your limit.

That last point matters on a small crossover. Several hitches here are rated at 3,500 lb or more, but Subaru’s Crosstrek Wilderness page quotes 3,500 pounds for the Wilderness and notes that maximum towing capacity varies by trim level. Other trims may be rated lower, so read the towing section of your owner’s manual and the vehicle placard rather than the hitch box.

Tongue weight matters most to rack owners: add the rack and bikes together and compare the total with every rating. Also read these details on each listing:

  • Receiver size: a 2 inch opening accepts more racks and carriers, while a 1.25 inch opening suits lighter racks and small trailers.
  • Install type: many Crosstrek hitches need existing holes enlarged, and some need the lower fascia trimmed. The listing and instructions say which.
  • Lighting: hitches do not include wiring. A trailer needs a 4-way harness, bought separately.

Best Trailer Hitch for Subaru Crosstrek: Six Picks by Generation

The list runs from the most common fit to the narrowest. Check Amazon’s fit checker with your exact car, and treat the hitch rating as a ceiling your Crosstrek may never reach.

1. CURT 13382: Class 3 2 in Receiver for 2018-2023 Crosstrek

CURT 13382 product photo
Key features
  • 3,500 lb GTW and 525 lb TW rating
  • Concealed main body for an OE look
  • Hole enlargement required, no drilling
  • Tested in accordance with SAE J684

The CURT 13382 is a Class 3 trailer hitch with a 2 inch receiver, built for the second-generation Crosstrek. Its listing names 2018 to 2023 Crosstrek models, and CURT describes it as a vehicle-specific design engineered for a custom fit.

The hitch is rated for 3,500 lb gross trailer weight and 525 lb tongue weight, and CURT says it is tested for safety in accordance with SAE J684. The main body is concealed, so most of the steel sits behind the rear bumper and only the receiver shows. The listing says installation requires enlarging existing holes but no drilling, which keeps the job within reach of a careful owner with the right tools and a torque wrench. The precisely welded design is meant to carry bike racks, cargo trays and light trailers.

Remember that 3,500 lb is the hitch’s limit, not your car’s. Subaru rates towing by trim, so check the owner’s manual and use whichever figure is lower. Lighting wiring is a separate purchase, and this part does not fit the 2013-2017 car, the newer body or the Wilderness, so confirm your year and trim in Amazon’s fit checker before ordering.

View CURT 13382 on Amazon

2. Draw-Tite 36644: Class 2 1.25 in Receiver for 2016-2024 Crosstrek

Draw-Tite 36644 product photo
Key features
  • Listed for 2016-2024 Crosstrek, 2018-2024 Impreza
  • 3,500 lb GTW and 350 lb TW rating
  • All-welded steel, two-part black powder coat
  • Tested to V-5 and SAE J684 standards

The Draw-Tite 36644 is a Class 2 hitch with a 1.25 inch receiver, and its listing covers the 2016 to 2024 Crosstrek along with the 2018 to 2024 Impreza. Draw-Tite says its Class 2 hitches are custom built according to manufacturer specifications for a proper fit.

It is made of solid, all-welded steel and protected by a two-part black powder coat finish meant to resist rust and corrosion. Draw-Tite rates it at 3,500 lb gross trailer weight and 350 lb tongue weight, and says each design goes through fatigue and stress testing to meet V-5 and SAE J684 standards. The smaller receiver accepts 1.25 inch bike racks, ball mounts and cargo trays, which tend to be lighter and shorter than their 2 inch versions.

The 350 lb tongue rating is lower than the Class 3 hitches in this guide, and the listing states it is not suitable for weight distribution systems. Many heavier platform racks for e-bikes need a 2 inch receiver, so check your rack’s fitting before choosing this one. As with every hitch, your Crosstrek’s own limit in the owner’s manual comes first, and the fit checker should confirm your year and trim.

View Draw-Tite 36644 on Amazon

golden sunset illuminating a quiet desert road with distant hills and sparse vegetation

3. CURT 13634: Class 3 2 in Receiver for Crosstrek Wilderness

CURT 13634 product photo
Key features
  • Listed for select Crosstrek Wilderness years
  • 3,500 lb GTW and 525 lb TW rating
  • Dual-coat A-coat and black powder coat finish
  • Tested on-vehicle and to SAE J684

The CURT 13634 is a Class 3 trailer hitch with a standard 2 inch by 2 inch receiver, listed for select model years of the Crosstrek Wilderness. The Wilderness rides higher than other Crosstrek trims and wears its own rear styling, so CURT builds a separate part for it. Subaru quotes 3,500 pounds of towing capacity for the Wilderness.

The hitch is rated for 3,500 lb gross trailer weight and 525 lb tongue weight, limited to the lowest-rated towing component. CURT says every Class 3 design is tested in real-world, on-vehicle conditions at its Detroit engineering facility and to SAE J684 standards. The finish pairs a rust-resistant liquid A-coat with a black powder coat, co-cured together to resist rust, chipping and UV.

This is the one pick here whose rating can line up with the vehicle’s, but Subaru notes that trailer brakes may be needed, so read the towing section of your owner’s manual before you go near the limit. The listing says it is not compatible with bike racks that hang bikes vertically. It will not fit a regular Crosstrek, so confirm the trim and year in the fit checker before you buy.

View CURT 13634 on Amazon

4. CURT 13633: Class 3 2 in Receiver for Select Crosstrek Models

CURT 13633 product photo
Key features
  • Custom fit for select Crosstrek model years
  • 3,500 lb GTW and 525 lb TW rating
  • Rust, chip and UV-resistant dual-coat finish
  • Standard 2 in x 2 in receiver opening

The CURT 13633 is a Class 3 hitch with a standard 2 inch receiver, sold for select Crosstrek models. It shares its ratings and finish with the Wilderness hitch above, but it is listed for the regular Crosstrek rather than the Wilderness trim. If your car is outside the 2018-2023 range that the CURT 13382 covers, this is the CURT listing to check next.

It is rated for 3,500 lb gross trailer weight and 525 lb tongue weight, limited to the lowest-rated part of the towing setup. CURT says the design is tested on-vehicle at its Detroit engineering facility and to SAE J684 standards. Its dual-coat finish combines a liquid A-coat with a black powder coat, which CURT says resists rust, chipping and UV.

Because the listing only says select model years, the fit checker matters more than usual with this one. Enter your exact year, trim and whether the car is a Hybrid before ordering, and compare the result with the hitch that the CURT catalog shows for your car. The listing also notes it does not suit vertical hanging bike racks, and your owner’s manual sets the towing limit.

View CURT 13633 on Amazon

foggy road winding through a dense forest

5. Reese 84209: Class 3 2 in Receiver for 2016-2021 Crosstrek

Reese 84209 product photo
Key features
  • 2 in square receiver tube opening
  • Up to 4,500 lb GTW and 675 lb TW
  • Attaches to the frame and/or bumper
  • Ball mount, pin and clip sold separately

The Reese 84209 is a Class 3 hitch with a 2 inch square receiver, listed for the 2016 to 2021 Crosstrek and the 2018 to 2021 Impreza. That range takes in the last two first-generation years and most of the second generation. Reese describes a clean appearance that attaches to the vehicle’s frame and, depending on the car, the bumper.

The listing rates it at up to 4,500 lb gross trailer weight and up to 675 lb tongue weight, the highest figures among these six hitches. The extra tongue capacity gives useful headroom for a heavy platform bike rack or a loaded cargo tray, where the downward load matters more than trailer weight. The removable ball mount, pin and clip are sold separately, so plan on buying those parts at the same time.

A 4,500 lb hitch does not let a Crosstrek tow 4,500 lb. The car’s limit in the owner’s manual still applies, along with the ratings on the ball mount and rack. The listing’s general wording mentions trucks, vans and SUVs, so rely on the fit checker for your exact year and trim, and check whether your car is a Hybrid.

View Reese 84209 on Amazon

6. CURT 13135: Class 3 2 in Receiver for 2013-2017 Crosstrek

CURT 13135 product photo
Key features
  • Fits 2013-2015 XV Crosstrek, 2016-2017 Crosstrek
  • 3,500 lb GTW and 525 lb TW rating
  • Exposed hitch body, hole enlargement
  • High-gloss black powder coat finish

The CURT 13135 is a Class 3 hitch with a 2 inch receiver tube for the first-generation car. Its listing covers the 2013 to 2015 Subaru XV Crosstrek and the 2016 to 2017 Crosstrek, the years before the platform changed. Owners of older Crosstreks have fewer vehicle-specific choices, so a hitch built for this body is worth knowing about.

CURT rates it at 3,500 lb gross trailer weight and 525 lb tongue weight, tested in accordance with SAE J684, and describes it as a vehicle-specific design engineered for a custom fit. The hitch body is exposed rather than hidden behind the bumper, and installation calls for hole enlargement. A high-gloss black powder coat finish protects the welded steel.

On a car this age, look at the rear frame rails and mounting points for rust before installing any hitch. Salt-belt cars can lose metal around the attachment holes, and a weak mount cannot be fixed by a strong hitch. Confirm your year in the fit checker, follow the towing limit in your owner’s manual, and keep wiring and a pin lock on your list.

View CURT 13135 on Amazon

Crosstrek Hitches Compared by Year and Use

Model yearsHitchReceiver and listed ratingSuits
2013-2017CURT 131352 in, 3,500 lb GTW / 525 lb TWFirst-generation cars
2016-2021Reese 842092 in, 4,500 lb GTW / 675 lb TWHeavier racks, within the car’s own limit
2016-2024Draw-Tite 366441.25 in, 3,500 lb GTW / 350 lb TWLight bike racks and small trailers
2018-2023CURT 133822 in, 3,500 lb GTW / 525 lb TWA concealed look on the second generation
Select newer modelsCURT 136332 in, 3,500 lb GTW / 525 lb TWRegular trims after the 2018-2023 range
Crosstrek WildernessCURT 136342 in, 3,500 lb GTW / 525 lb TWThe Wilderness trim only
Subaru Crosstrek hitches from this guide by model years, receiver size and listed rating

A locking hitch pin or coupler lock stops a rack or trailer from walking off, and a pair of trailer wheel chocks keeps a small trailer still while you hitch up. If a camper or utility trailer is wider than the car, our tow mirror guide explains clip-on and extension options.

serene autumn scene featuring a dirt road surrounded by colorful trees

Wiring, Salt and Winter Towing in West Michigan

Trailer lighting is a separate job from the hitch. A trailer needs brake, turn and tail lights, usually through a vehicle-specific 4-way harness. If the trailer lights flicker or a fuse keeps blowing, our car electrical repair service can trace the circuit.

Road salt is the other problem. Grand Rapids winters coat the receiver tube and pin hole with brine, and a ball mount left in all season can rust in place. Pull the mount after use, grease the pin and work through our winter car maintenance checklist for the rest of the car.

scenic rural road lined with trees and grassy hillsides under a clear blue sky

Cold weather also strains an aging battery, and trailer lights add load. If the engine cranks slowly on a frosty morning, read why a car won’t start in cold weather before a trip, and keep a winter emergency kit for the car in the cargo area, because a roadside stop is harder with a trailer behind you.

When to Have a Mechanic Look First

Some signs mean the car needs attention before it carries anything. Rust on the rear frame rails where the hitch bolts on, a rear end that sags or bounces under load, or brakes that already pull or grind all deserve a check first.

beautiful scenic road between hills

Our brake repair service in Grand Rapids covers pads, rotors and fluid, and our suspension repair team can check struts and springs that sag under a rack or trailer. Choosing the best trailer hitch for Subaru Crosstrek models is only part of the job.

Frequently Asked Questions

What is the best trailer hitch for Subaru Crosstrek 2018-2023 models?

For a concealed 2 inch receiver, CURT 13382 is listed for 2018-2023 cars. If you only carry a light bike rack, Draw-Tite’s 1.25 inch 36644 covers 2016-2024. Confirm your trim, and whether the car is a Hybrid, in the fit checker.

How much can a Subaru Crosstrek tow?

It depends on the trim. Subaru quotes 3,500 pounds for the Crosstrek Wilderness and says maximum towing capacity varies by trim level. Check your owner’s manual and vehicle placard for your exact car, and stay within the lowest rating in the setup.

Does a Crosstrek hitch need drilling?

Several Crosstrek listings call for enlarging existing holes rather than drilling new ones, and CURT says its 13382 needs no drilling. Read the instructions before you start, and check that the rear frame rails are free of heavy rust.

Do I need wiring for a bike rack on a Crosstrek?

Usually not. Wiring is needed for a trailer, or for a rack or cargo carrier that blocks the tail lights or license plate. For a small trailer, a vehicle-specific 4-way harness is the usual choice.

Getting the Crosstrek ready for bikes, a cargo tray or a small trailer? Ring the shop at 616-279-3832 on a weekday between 8am and 5pm, or ask for a brake and suspension check before your first trip.

Can’t spare the car during working hours? Our after-hours drop-off at 456 Carrier St NE in Creston lets you leave the Crosstrek on your own schedule, rack and all.