As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Rear shocks on a half-ton pickup wear out quietly. The bed starts to bob after a dip, a loaded trailer makes the truck wallow, and the search for replacements lands on bilstein vs gabriel shocks within a few clicks.
The two names sit at different ends of the shelf. Gabriel sells OE-style replacements at an everyday price, while Bilstein builds monotube shocks aimed at drivers who want more control. To keep the comparison fair, this guide puts both brands on one axle of one truck: the rear of a 2009-2018 Ram 1500 4WD without air suspension. If you drive a car or crossover instead, our guide to shocks and struts for daily drivers covers a wider spread of vehicles.
Quick answer
Should a Ram 1500 get Bilstein or Gabriel rear shocks?
Choose Gabriel’s Ultra Truck if the Ram is a stock-height commuter and you want a factory-style ride for less money. Choose Bilstein’s B6 4600 if you tow, haul or drive rough roads and want firmer monotube control. Leveled trucks with up to one inch of rear lift should look at the Bilstein 5100.
Our Quick Picks
A Gabriel and a Bilstein rear shock for the same stock-height 2009-2018 Ram 1500 4WD, plus Bilstein's 5100 pair for leveled trucks. All three are reviewed in full below.

Gabriel Ultra Truck G64044
OE-style replacement that brings back a familiar, comfortable ride.

Bilstein B6 4600 Rear Pair
Firmer factory-height control that holds up under loads and heat.

Bilstein B8 5100 Rear Pair
Bilstein's lift-ready rear pair for trucks that sit a little taller.
How the Two Brands Build a Truck Shock
Gabriel sells a long ladder of shock lines, from budget Guardian and ProGuard shocks up to Ultra, MaxControl monotubes and HiJackers air shocks. Its Ultra shocks and struts page calls the range a premium OE replacement. Gabriel credits its G-Force technology and StableSteer valving for quicker response and steadier tire contact, and it lists a chromed piston rod and an OE-design single-lip oil seal.
Bilstein takes a different route. Its truck range is built around the monotube layout, with a single large pressure tube and a floating piston that keeps the gas charge apart from the oil. For pickups, the company splits the lineup by ride height: the B6 4600 for trucks at factory height and the B8 5100 for trucks with a leveling kit or a mild lift.
Twin-tube against monotube, briefly
The Gabriel Ultra Truck is a twin-tube shock, so it has an inner working cylinder surrounded by an outer reserve tube. That design packs plenty of oil into a compact body and usually feels soft over small cracks and expansion joints. Gabriel’s page notes that gas-charged shocks use nitrogen to reduce oil foaming during fast damping.
A monotube shock has one wall between the hot oil and the outside air, and a larger piston working inside it. The result is better heat shedding on long washboard stretches or a full day of towing, so damping fades less as the shock warms up. The usual trade-off is a firmer, busier feel on sharp, short bumps when the bed is empty.
Why the Ram rear axle makes a fair test
When the 2009 Ram arrived, it broke from the leaf-spring norm. Stellantis describes it in its 2009 Ram press release as a solid rear axle held in place by multiple links, with coil springs instead of leaf packs. Each rear shock mounts apart from its spring, so this is a straight comparison of dampers on a common, popular truck.
Gabriel and Bilstein Rear Shocks on Paper
The table pulls its details from the three Amazon US listings. One practical difference jumps out: Gabriel’s listing is a single shock, while both Bilstein listings are rear pairs, so you need two Gabriels for the axle.
| Detail | Gabriel Ultra Truck G64044 | Bilstein B6 4600 pair | Bilstein B8 5100 pair |
|---|---|---|---|
| Design | Twin-tube | Monotube, digressive valving | Monotube, digressive valving |
| Fit named in listing | 2009-2018 Ram 1500 and 2019-2020 Ram 1500 Classic, 4WD | 2009-2018 Ram 1500 4WD, no air suspension | 2009-2018 Ram 1500, no air suspension |
| Ride height | Stock | 0 in rear lift | 0-1 in rear lift |
| Quantity | One shock | Two shocks | Two shocks |
| Warranty stated | Not stated in listing | Limited lifetime | Limited lifetime |
Gabriel’s site and its warranty page cover coverage terms for the Ultra range, so check those before you buy if a warranty matters to you. The Bilstein pair listings both name a limited lifetime warranty.
Bilstein vs Gabriel Shocks: The Ram 1500 Rear Shocks Up Close
All three parts below go on the rear axle of a 2009-2018 Ram 1500. Enter your year, cab, drivetrain and suspension in Amazon’s fit checker before ordering, since trucks with factory air suspension, a different drivetrain or a lift may need another part number.
Gabriel Ultra Truck G64044: Twin-Tube Rear Shock for 2009-2018 Ram 1500 4WD

- Single rear shock for 2009-2018 Ram 1500 and 2019-2020 Ram 1500 Classic 4WD
- Twin-tube design aimed at OE-style ride and handling
- OE interchangeable, bolt-on installation
- Part of Gabriel's Ultra premium replacement range
The G64044 belongs to Gabriel’s Ultra Truck family, the light truck side of the company’s premium OE replacement line. Its Amazon title covers the 2009-2010 Dodge Ram 1500, the 2011-2018 Ram 1500 and the 2019-2020 Ram 1500 Classic with four-wheel drive, all at the rear axle. The listing is for one shock, so order two to do the axle, and check your cab, bed and suspension in the fit tool before you buy.
Gabriel describes it as a precision engineered twin-tube shock, interchangeable with the original part and installed with a simple bolt-on swap. On its own Ultra page, the maker credits G-Force technology and StableSteer valving for quicker response and firm tire contact, and lists a chromed piston rod, a single-lip oil seal modeled on the factory design and, in most applications, a piston with a 1 3/8 inch bore.
In practice this shock suits a Ram that spends its life on pavement at factory height, where the goal is to stop rear bounce and float without changing the feel the owner is used to. It is a sensible pick for an older truck on a careful budget. It is not built for a leveled or lifted rear, and a truck that tows heavy loads often may prefer a monotube.
View Gabriel Ultra Truck G64044 on Amazon

Bilstein B6 4600 Rear Pair: Monotube Shocks for 2009-2018 Ram 1500 4WD at Stock Height

- Two rear shocks for 2009-2018 Ram 1500 4WD without air suspension
- Made for 0 in of rear lift (factory height)
- Velocity-sensitive digressive valving
- Vulcanized neoprene bushings, limited lifetime warranty
This listing supplies a matched pair of Bilstein B6 4600 rear shocks for the 2009-2018 Ram 1500 with four-wheel drive. It names two limits clearly: the truck must not have factory air suspension, and the rear should sit at stock height with no lift. Because both shocks come in one box, a single order covers the axle, which keeps the two sides identical from the start.
The 4600 is Bilstein’s stock-height truck shock, built on the company’s monotube layout. The listing highlights velocity-sensitive digressive valving that responds quickly to changing road surfaces, aiming for a ride that stays controlled on pavement and on rough ground. Bilstein says each application is tuned through real-world road testing, fits vulcanized neoprene bushings for long service under heavy loads and backs the pair with a limited lifetime warranty.
This pair suits a Ram that pulls a boat or camper, carries tools or firewood in the bed, or runs gravel and dirt roads at factory height. Many owners describe the feel as tighter than stock, so a driver who wants the softest possible ride on an empty bed may prefer the Gabriel. If the truck has a leveling kit or rear lift, step to the 5100 instead.
View Bilstein B6 4600 Rear Pair on Amazon
Bilstein B8 5100 Rear Pair: Monotube Shocks for 2009-2018 Ram 1500 with 0-1 Inch Lift

- Two rear shocks for 2009-2018 Ram 1500 without air suspension
- Rated for 0-1 in of rear lift
- Digressive valving tuned per application
- Zinc-plated body finish, limited lifetime warranty
The third pick stays with the same truck and axle but covers a different build. This pair of B8 5100 rear shocks lists the 2009-2018 Ram 1500 without air suspension, with a rear lift of zero to one inch. It belongs here because many Ram owners level the front end and raise the rear slightly, which moves the shock into a part of its travel that a stock-length unit was not made for.
Like the 4600, the 5100 uses Bilstein’s monotube construction and velocity-sensitive digressive valving, which the listing says reacts at once to changing road conditions for a smooth but controlled ride. Bilstein states that the valving is tuned for each vehicle through real-world road testing. A zinc-plated finish protects the body from rust and road salt, and the pair carries a limited lifetime warranty.
Choose this pair if your Ram already has a leveling kit, taller springs or spacers that lift the rear up to an inch, or if you plan to add one soon. It also suits drivers who want the 4600’s firm control with room for a modest lift. For a truck at factory height, the 4600 is the closer fit, and trucks lifted beyond one inch need a different part.
View Bilstein B8 5100 Rear Pair on Amazon

Which Shock Fits the Way You Use the Truck
Brand loyalty matters less here than the work the Ram does each week. A commuter that rarely carries more than groceries asks very different things of its rear shocks than a truck that pulls a camper to the lakeshore every other weekend.
| How the truck is used | Closer match | Why |
|---|---|---|
| Highway and city commuting, empty bed | Gabriel Ultra Truck | OE-style twin-tube ride at a lower cost |
| Regular towing or heavy loads in the bed | Bilstein B6 4600 | Monotube holds damping as it heats |
| Gravel roads, two-tracks, washboard | Bilstein B6 4600 | Tighter control over repeated hits |
| Front leveling kit or small rear lift | Bilstein B8 5100 | Rated for 0-1 in of rear lift |
| Older truck kept on a tight budget | Gabriel Ultra Truck | Restores control without a premium spend |
On truck forums, owners tend to describe the Bilstein 4600 as planted and a little stiff with an empty bed, and Gabriel’s Ultra line as soft and familiar. Treat those comments as opinions rather than measurements, because tire pressure, tire size and payload change ride feel as much as the shock does.
Gabriel also faces other OE-tier brands in our comparisons. Our Monroe and Gabriel Odyssey comparison and our KYB and Gabriel CR-V matchup show how it stacks up on family vehicles. For another Bilstein truck test, see the Monroe and Bilstein Silverado rear shock comparison.
Swapping Rear Shocks on a Coil-Spring Ram
Because the rear coil spring and shock live apart, a rear shock job on this truck needs no spring compressor. The catch is that the shock also limits how far the axle can drop. Keep a jack or stands under the axle before you pull the lower bolt, so the axle cannot sag and let a coil spring slip off its seat.

Fit both sides with the same part number, and never pair a fresh shock with a worn one across the axle. Uneven damping left to right can make the rear step out over a bump in a turn. Swapping rear shocks alone does not change wheel alignment on a solid axle, though it pays to look at the control arm bushings and track bar while you are under there.
The front of these trucks is a different job, since the shock sits inside the coil spring. A bare front unit means the spring must be compressed and moved over, which can injure you badly if the tool slips, so read our coil spring compressor buying guide first. Front strut work also calls for an alignment afterward, and our Ram 1500 strut guide covers loaded front assemblies that skip the compressor step.
Salt, Potholes and West Michigan Pickups
A Grand Rapids winter coats the rear axle in brine for months. The lower shock bolts on a Ram sit right in the spray from the rear tires, and they often fight back when it is time to remove them. Spray penetrating oil the night before, use a six-point socket and expect to need a breaker bar.

Spring thaw brings potholes, and a truck with tired rear shocks feels each one as a hard thump followed by a second bounce. Many local Rams also tow boats and campers north in summer, which is where the heat tolerance of a monotube earns its keep. If your truck mostly runs between home and work in town, the gentler twin-tube side of the bilstein vs gabriel shocks question may serve you well.
Whichever brand you choose, rinse the underside after salt season ends. A shock body that looks wet with oil or a bushing that has split means replacement should be on the list before next winter.
Signs It Is Time to Call a Mechanic
Not sure the shocks are the problem? Our guide on how to tell if struts are bad covers bounce tests, fluid leaks and cupped tires, and those same checks work for rear shocks. A squeak or creak over speed bumps often traces back to bushings or links instead, which our article on why a car squeaks when going over bumps explains.

Rusted mounting bolts that snap, a clunk that new shocks do not cure, or rear end wander under load are good reasons to let a shop look first. Our technicians handle suspension repair in Grand Rapids on domestic and foreign vehicles alike. Steering and suspension is one of the areas in which owner Hendrick Hoffman is certified by both ASE and the State of Michigan, which helps when a worn link or bushing hides behind a shock complaint.
More Buying Guides
Frequently Asked Questions
Is Bilstein better than Gabriel?
In the bilstein vs gabriel shocks debate, the answer depends on the job. Bilstein’s monotube 4600 and 5100 lines give firmer control for towing, hauling and rough roads, while Gabriel’s twin-tube Ultra Truck restores a factory-style ride for less money. Match the part to your vehicle, ride height and driving.
Are Gabriel shocks any good on a pickup?
Gabriel’s Ultra range is sold as a premium OE replacement, and the maker lists features such as StableSteer valving and a chromed piston rod. For a stock-height truck that mostly commutes, it is a sensible way to bring back lost control.
Should I get the Bilstein 4600 or 5100 for a Ram 1500?
Pick the 4600 for a truck at factory height and the 5100 if the rear sits up to one inch higher, as with many leveling setups. Buying for the height you actually run keeps the shock working in the right part of its stroke.
Can I put Gabriel shocks on the front and Bilstein on the rear?
The parts will bolt on, but the two axles will damp differently, which can make the truck feel uneven over bumps. Keep both sides of an axle matched at minimum, and use one brand and line on all four corners when you can.
Ram still bouncing or clunking at the rear after new shocks? Call 456 AutoFix at 616-279-3832, Monday to Friday between 8am and 5pm, or ask for a rear suspension check through our contact page.
Weekday hours not working for you? Drop the keys with our after-hours service and park the pickup at 456 Carrier St NE, Grand Rapids, MI 49505 on your way past.
