456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Strut-Plus or ReadyMount? KYB vs Gabriel on a Honda CR-V

kyb vs gabriel: two fists bumping

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Shop for replacement struts on a crossover and two names keep showing up next to each other: KYB and Gabriel. Choosing kyb vs gabriel can feel like guesswork, because both sell complete loaded assemblies for the same vehicles, and owner opinions online point in every direction.

We narrowed the question to one vehicle and one corner so the comparison stays honest: the front of a 2012-2016 Honda CR-V. One complete assembly from each brand goes head to head, a Monroe Quick-Strut for the same corner joins as a third reference, and a brand-level section covers the rest of each lineup. For a broader field of options, see our roundup of shocks and struts for daily drivers.

Quick answer

Is KYB or Gabriel the better strut for a Honda CR-V?

Both make complete front assemblies for the 2012-2016 CR-V, and Gabriel’s own interchange list pairs its G57480 with KYB’s SR4388. Pick KYB Strut-Plus if you want a factory-style feel around an Excel-G strut. Pick Gabriel ReadyMount if you want a listing that spells out year, side and drivetrain.

Our Quick Picks

One complete front assembly from each brand for the same 2012-2016 CR-V corner, plus a Monroe Quick-Strut as a third point of reference. All three are reviewed in full below.

KYB Strut-Plus SR4388 product photo
KYB pick

KYB Strut-Plus SR4388

Complete assembly, Honda CR-V

Bolt-in corner built around KYB's Excel-G strut and its own matched spring.

SuitsOwners who want a factory-style feel without compressing springs
View on Amazon →
Gabriel ReadyMount G57480 product photo
Gabriel pick

Gabriel ReadyMount G57480

Complete assembly, front right, 2012-2016 CR-V FWD

Pre-assembled Ultra strut, spring and mount with fitment spelled out on the listing.

SuitsFront-drive CR-V owners who want exact fitment data before ordering
View on Amazon →
Monroe Quick-Strut 272957R product photo
Monroe alternative

Monroe Quick-Strut 272957R

Complete assembly, right side, 2012-2016 CR-V

Loaded strut, coil spring and premium upper mount with a rust-resisting coating.

SuitsSalt-belt drivers who want a third option for the same corner
View on Amazon →

Two Different Paths to the Same Strut Tower

KYB began in Japan in 1919 and today supplies dampers to carmakers around the world as well as to the parts aisle. That factory supplier background shapes how it sells replacement parts: its pitch is about putting a car back to the handling it had when new. KYB’s own suspension safety guide recommends replacing shock absorbers at around 50,000 miles and always as an axle pair, with the top mounts renewed at the same time.

Gabriel is a long-standing American name in ride control, and today its catalog stretches from passenger cars to heavy trucks, buses and fleet vehicles. For cars and crossovers it leans on what it calls G-Force technology and StableSteer valving, both aimed at keeping the tire planted on rough pavement. Gabriel’s own FAQ suggests a professional check every 12 months or 12,000 miles and replacement at about 50,000 miles, so the two makers land on a similar service interval.

What each brand sells for a CR-V

Each company offers a bare strut and a loaded assembly. On the KYB side that means the Excel-G, a gas strut sold on its own, and the Strut-Plus, which arrives with the strut, coil spring and upper mount already put together. KYB’s Strut-Plus listings say an Excel-G strut sits inside, so the damper is the same part in both forms.

Gabriel’s matching pair is the Ultra, its premium bare OE-replacement strut, and the Ultra ReadyMount, a complete corner unit. According to Gabriel’s ReadyMount product page, each assembly includes the upper mount, strut bumper, boot, coil spring and spring seat, and every new design is fit and ride tested on the vehicle it is built for. Gabriel also sells lower-priced lines such as ProGuard and Guardian, which sit below the two compared here.

One CR-V Front Corner, Side by Side

In this kyb vs gabriel matchup, the main pair below is meant to replace the same factory unit, with Monroe’s Quick-Strut alongside for reference. Gabriel’s listing names the front right corner of a 2012-2016 CR-V with front-wheel drive, and its interchange list includes KYB SR4388. The KYB listing names the Honda CR-V but not the years or side, so treat that cross-reference as a starting point and run your VIN through Amazon’s fit checker.

PointKYB Strut-Plus SR4388Gabriel ReadyMount G57480Monroe Quick-Strut 272957R
TypeComplete corner: strut, mount and springComplete strut and coil spring assemblyStrut, coil spring and upper mount, preassembled
Vehicle named in listingHonda CR-V (years and side not in the title)Front right, 2012-2016 Honda CR-V FWD2012-2016 Honda CR-V (R suffix marks the right side)
Strut insideKYB Excel-G with stronger steel outer shellGabriel Ultra strut with G-Force technologyOE-style strut, steel tube and weld design
SpringApplication engineered KYB springVehicle-specific spring rate (maker page)Application-specific, calibrated to the OE design
Specs givenNot statedStroke 8.47 in, extended 23.19 in, collapsed 14.72 inNot stated
Spring compressorNot neededNot neededNot needed
Warranty in listingNot statedNot statedNot stated
KYB SR4388, Gabriel G57480 and Monroe 272957R compared from their Amazon US listings and maker pages for the 2012-2016 CR-V front

On paper all three are close relatives, each a bolt-in corner with a matched spring and mount. Monroe says the most about corrosion protection. Between KYB and Gabriel, the clearest gaps are documentation, where Gabriel gives dimensions and exact fitment, and the strut itself, where KYB builds around its Excel-G and Gabriel around its Ultra.

KYB vs Gabriel: Three CR-V Front Assemblies in Detail

Each unit here is listed for a single corner, and you will need the opposite side from the same brand and line. Order the left-hand partner that the brand’s catalog names for your CR-V so the axle stays matched.

KYB Strut-Plus SR4388: Complete Strut, Mount and Spring Assembly for Honda CR-V

KYB Strut-Plus SR4388 product photo
Key features
  • Pre-assembled corner unit for Honda CR-V
  • Built around a KYB Excel-G strut
  • Stronger steel outer shell
  • Application engineered KYB coil spring

The SR4388 is part of KYB’s Strut-Plus range, the brand’s line of complete corner units. Its listing names the Honda CR-V and says the assembly is designed for proper ride height and the original handling of the vehicle. The title does not state model years or which side it fits, but Gabriel’s interchange list for its 2012-2016 front right CR-V unit names SR4388, which points to the same corner.

Inside sits a KYB Excel-G strut, which KYB pairs with a stronger steel outer shell and damping valves it describes as precision designed for the application. The coil spring is KYB’s own, engineered to match the strut, hold ride height longer and carry the weight of the vehicle without hurting ride quality. Because the strut, spring and upper mount arrive assembled, there is no spring to compress and the job becomes a bolt-out, bolt-in swap.

This unit suits a CR-V owner with sagging springs or worn mounts who wants a feel close to stock. It is less suited to anyone who cannot confirm fit, since the listing leaves out years and drivetrain. Check your VIN with Amazon’s fit checker, buy the opposite side from the same line, and book an alignment afterward.

View KYB Strut-Plus SR4388 on Amazon

driver's hands on the wheel at sunset

Gabriel Ultra ReadyMount G57480: Front Right Complete Strut Assembly for 2012-2016 Honda CR-V FWD

Gabriel ReadyMount G57480 product photo
Key features
  • Front right, 2012-2016 Honda CR-V FWD
  • Stroke 8.47 in, extended length 23.19 in
  • No spring compressor needed
  • Interchange list includes KYB SR4388

The G57480 is a Gabriel Ultra ReadyMount, the brand’s complete strut and coil spring assembly. Its listing is specific: front right corner of a 2012-2016 Honda CR-V with front-wheel drive. It also gives the dimensions, with a stroke of 8.47 inches, an extended length of 23.19 inches and a collapsed length of 14.72 inches, plus upper and lower mount codes. All-wheel-drive models take a different Gabriel part, so check your drivetrain first.

Gabriel says each ReadyMount comes with the upper mount, strut bumper, boot, coil spring and spring seat already fitted around a strut using its G-Force technology. The maker lists a noise-damping bumper, a spring isolator and a chromed piston rod for corrosion resistance, and it states that each new design is fit and ride tested on the vehicle. Like any loaded unit, it removes the need for a spring compressor and shortens the job.

This assembly suits a front-drive CR-V owner who wants clear fitment details and a ride Gabriel tunes for rough roads. It is the wrong part for an AWD model or the left side, which needs its own number. Order the matching left unit from the same line, confirm fit with Amazon’s checker and plan for an alignment.

View Gabriel ReadyMount G57480 on Amazon

Monroe Quick-Strut 272957R: Right Side Strut and Coil Spring Assembly for 2012-2016 Honda CR-V

Monroe Quick-Strut 272957R product photo
Key features
  • Fits 2012-2016 Honda CR-V
  • Preassembled mount, coil spring and strut
  • Protective coating, salt spray tested
  • No spring compressor needed

Monroe is the name CR-V owners most often weigh against these two, and Quick-Strut is its loaded assembly line. The 272957R listing gives a fit of 2012-2016 Honda CR-V, the same span named on the Gabriel unit, and the R in the part number marks the right-hand side, with Monroe selling the left as 272957L. Drivetrain is not mentioned in the title, so a VIN check matters here just as much as it does for the KYB.

Monroe describes a preassembled upper strut mount, coil spring and strut built to an OE-style design. Each spring is application specific and calibrated to the original design, meant to restore ride height and hold up the weight of the vehicle. The maker highlights a premium upper mount aimed at cutting noise, vibration and memory steer, plus a steel tube and weld design for durability. A protective coating resists rust, and Monroe says the part goes through salt spray testing.

That coating gives this unit a case on a CR-V that spends every winter on salted Michigan roads. It suits a buyer who wants a third option for the same corner before choosing a brand. It fits less well for anyone who wants published stroke and length figures, because the Monroe listing gives none.

View Monroe Quick-Strut 272957R on Amazon

road through green hills from the driver's seat

Where KYB and Gabriel Differ

Ride feel, as each maker describes it

KYB pitches the Strut-Plus around proper ride height and the handling the CR-V had when it left the factory. Gabriel pitches the Ultra around quick response and steady tire contact, through its G-Force technology and StableSteer valving. In owner forums, KYB is often called firm and close to stock, while Gabriel draws a wider spread of comments, from soft at first to well settled after a few months. Those are opinions, and they change from one vehicle to the next.

Springs, mounts and build details

KYB says its Strut-Plus spring uses its own application engineering to hold ride height longer while carrying the weight of the vehicle. Gabriel lists a noise-damping strut bumper, a spring isolator and a chromed piston rod meant to resist corrosion. Gabriel’s Ultra page also names a single-lip oil seal and a bonded iron piston on most applications.

couple reaching for a product on a shelf

Warranty: check before you count on it

None of the three Amazon listings covered here states a warranty term. Gabriel publishes a limited product warranty document on its website, while KYB’s US site would not load for us to confirm its terms. Read the paperwork in the box and keep your receipt, because terms can differ for parts sold through third-party sellers.

Loaded assembly or bare strut

All three parts reviewed here are loaded, so nothing needs to be compressed and the old spring and mount come off as one piece. If you would rather buy a bare KYB Excel-G or Gabriel Ultra and reuse your springs, you will need a spring compressor. A coil spring under load stores enough energy to cause a serious injury if it slips, so read our guide to choosing a coil spring compressor first and never use a bent or worn tool.

Matching the Brand to the Driver

The table below gives a starting point. Whichever way you lean, confirm year, drivetrain and side first. A 2012-2014 CR-V with all-wheel drive takes a different Gabriel part number from the front-drive model, and the 2015 refresh can change listings too.

Your situationBetter fitWhy
You want the CR-V to drive like it did newKYB Strut-PlusBuilt around the Excel-G, pitched at original handling
You want fitment spelled out before you orderGabriel ReadyMountListing names years, side, drivetrain and dimensions
Rough roads and steady tire contact matter mostGabriel ReadyMountG-Force technology and StableSteer valving, per Gabriel
The other side already has one brandSame brand and lineKeeps damping even across the axle
KYB vs Gabriel matched to common CR-V owner situations

Our fair verdict on kyb vs gabriel: a commuter who wants a factory feel and knows KYB from earlier cars will be comfortable with the Strut-Plus. A buyer who values clear fitment data and a ride tuned for broken pavement may prefer the ReadyMount. For other Honda models, our Honda strut buying guide covers the Civic, Accord, CR-V and Pilot.

Winter Roads, Axle Pairs and the Alignment

West Michigan winters are rough on a CR-V’s front end. Road salt creeps into the strut body, the spring seat and every bolt you will need to remove, and the freeze-thaw cycle leaves potholes that hammer the front struts each spring. Soak the top nuts and the knuckle bolts with penetrant the night before, and expect at least one to fight back.

wall of hand tools in a workshop

Whichever side of the kyb vs gabriel question you land on, replace front struts as a pair. A fresh unit on one side and a tired one on the other can make the CR-V pull under braking and lean more one way than the other in turns. Running KYB on the left and Gabriel on the right causes the same imbalance, since each maker tunes its valving in its own way.

The front strut on a CR-V locates the wheel, so camber and toe can move when the old one comes out. Plan on a wheel alignment after the job, even if the steering wheel looks centered. Skip it and the inside tire edges can wear down within a season.

When to Let a Shop Take Over

Not sure the struts are the culprit? Bounce after dips, nose dive under braking, oily strut bodies and cupped tires are the classic clues, and our article on how to tell if struts are bad walks through each one. A squeak that only shows up over speed bumps can come from bushings or sway bar links instead, as our piece on why a car squeaks when going over bumps explains.

two-way arrow sign by the sea

If seized hardware, a lack of lifting gear or a free afternoon stands in the way, hand the job to us. Our suspension repair service in Grand Rapids covers strut replacement, and we look over the mounts, links and ball joints while the corner is apart. Steering and suspension work is one of the areas where owner Hendrick Hoffman holds both ASE and State of Michigan certification.

Frequently Asked Questions

Is KYB better than Gabriel?

Neither wins on every vehicle. KYB builds its Strut-Plus around the Excel-G and aims for factory handling, while Gabriel’s ReadyMount uses its Ultra strut and stresses tire contact on rough roads. The better buy is the one listed for your exact year, drivetrain and corner.

Do KYB SR4388 and Gabriel G57480 fit the same CR-V?

Gabriel lists the G57480 for the front right of a 2012-2016 CR-V with front-wheel drive and names KYB SR4388 in its interchange list. KYB’s listing does not give years or side, so confirm both parts with Amazon’s fit checker before you order.

Can I mix a KYB strut with a Gabriel strut on one axle?

We advise against it. Each brand tunes its valving differently, so a mixed pair can make the vehicle pull or lean unevenly. Fit the same brand and line on both sides of the axle.

Will I need an alignment after installing loaded struts?

Yes. On the CR-V the front strut helps hold the wheel in position, so removing it can shift camber and toe. Have the alignment checked after the swap to protect your tires.

Front end still clunking or wandering on your CR-V? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a suspension appointment on our contact page.

Working the same hours we do? Bring the CR-V to 456 Carrier St NE whenever it suits you and use our after-hours drop-off, and we will take it from there.