As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Owners of European SUVs tend to run into this question at the parts counter, often after a forum post tells them the brand on the box matters less than they think. Brembo vs Delphi sounds like premium against value, yet both companies sell pads built to match the original part number, so the real differences sit in compound, hardware and how much the listing actually tells you.
US shoppers face a catch, because Delphi pads are hard to find on Amazon US, and the few listings that exist mostly cover European-market vehicles. We found one that names a common American-market model, the 2010-2016 Land Rover LR4, and Brembo sells two front sets for the same Land Rover OE number, so the LR4 front axle is our reference. For a wider look at pad types, see our guide to brake pads for daily driving.
Quick answer
Which front pads should an LR4 owner choose, Brembo or Delphi?
Brembo’s P44022N ceramic set is the better documented choice, with published dimensions, a shim, caliper bolts and accessories listed. Delphi’s LP2176 is a sound OE-number match with broad Land Rover coverage but very little detail on its listing. Brembo’s low-met P44022 suits owners who tow or carry heavy loads.
Our Quick Picks
One front pad set from each brand for the 2010-2016 Land Rover LR4, all matched to Land Rover OE number LR047859, plus Brembo's low-met version of the same pad as a closely related third pick. All three are reviewed in full below.

Brembo P44022N
Well documented ceramic set with shim and bolts in the box.

Delphi LP2176
OE-quality Delphi pad with a long Land Rover cross-reference list.

Brembo P44022
Brembo's low-met version of the same pad for heavier work.
Why Delphi Pads Are Scarce in American Stores
Delphi is a long-established name in fuel systems, ignition parts and diagnostics. On its US aftermarket site, the product categories cover fuel injection, fuel management, chassis parts, ignition, power electronics and test equipment, and the site footer carries the PHINIA name. A brake pad category is not among them.
Delphi pads are much more common in Britain and Europe, where the LP part numbers you see on Amazon come from. That explains why a search for a Delphi pad on a Hyundai, Toyota or Ford turns up nothing from the brand itself. The LP listings that do reach Amazon US are mostly for European vans and small cars, plus a set for several Land Rover models.
Brembo is the opposite case. It sells a broad North American pad range by part number, with Prime Ceramic sets carrying an “N” suffix and low-metallic sets without it. So for most US drivers, the practical Brembo vs Delphi question only comes up on European vehicles, and the Land Rover range is where both brands overlap on Amazon.
Matching the Part Numbers on the LR4 Front Axle
The fairest way to compare two brands is to line up pads cut for the same caliper. All three sets below point to Land Rover OE number LR047859. Delphi lists it among the numbers its LP2176 replaces, and both Brembo titles quote it directly. The table uses only what the listings and Brembo’s own catalogue state.
| Point | Brembo P44022N | Delphi LP2176 | Brembo P44022 |
|---|---|---|---|
| OE reference | LR047859 | LR047859 and eight others | LR047859 |
| Compound | Prime Ceramic | Not stated | Low-met alloy steel |
| Size | 193 x 73 mm, 19 mm thick (catalogue) | Not stated | Not stated on the listing |
| Hardware | Shim, caliper bolts, accessories | Not stated | Installation hardware listed |
| Wear sensor | Prepared for one, sensor not listed | Not stated | Not stated |
The gaps in the Delphi column are the story here. The Delphi listing tells you what it fits and little else, so you are trusting the brand’s OE-quality claim rather than reading a spec sheet. That isn’t a reason to avoid it, but it does mean you should open the box and check for shims and clips before the old pads come off.
Brembo vs Delphi: The Three LR4 Front Pad Sets in Detail
Land Rover fitted more than one front brake size across the LR4, Range Rover and Range Rover Sport, so an OE number match is a starting point, not a guarantee. Before you order any set below, read the part number off your old pads or enter your year, model and engine in Amazon’s fit checker.
Brembo P44022N: Prime Ceramic Front Brake Pad Set for Land Rover OE LR047859

- Prime Ceramic compound, OE-equivalent
- Front set for Land Rover OE LR047859
- Anti-squeal shim and caliper bolts
- Prepared for an electronic wear sensor
The P44022N belongs to Brembo’s Prime line, the company’s OE-equivalent replacement range, and its Amazon title ties it to Land Rover part number LR047859. Brembo’s catalogue lists it as a front, directional set in the FMSI D1479 shape, measuring 193 by 73 mm with a 19 mm thickness. Because Land Rover used more than one front brake size, compare those figures or the number on your old pads before ordering.
The ceramic compound is aimed at comfort, with the listing pointing to reduced friction wear and low dust for cleaner wheels. Chamfers and slots on the pad face help cut vibration and noise, and Brembo says the material meets or exceeds the original specs. The catalogue adds an anti-squeal shim and caliper bolts, and the listing says the hardware needed for installation is in the box.
One detail matters on a Land Rover: the catalogue describes the set as prepared for a wear indicator. That means the electronic sensor is not part of the package, so order one at the same time if yours has already triggered. This set suits LR4 owners who mainly commute and want factory-like feel with less dust. Owners who tow often may prefer the low-met version.

Delphi LP2176: Front Brake Pad Set for Land Rover LR4, Discovery 5 and Range Rover

- Front set made by Delphi
- Lists the 2010-2016 Land Rover LR4
- Replaces nine Land Rover OE numbers
- Also names Discovery 5 and Range Rover models
Delphi’s LP2176 is one of the few Delphi-brand pad sets listed on Amazon US, and it is the only one we found that names a common American-market vehicle. The listing describes it as a front set for the 2010-2016 Land Rover LR4 and the Discovery 5 from 2017. It also names several Range Rover and Range Rover Sport versions, including supercharged V6 and diesel models of certain years.
The strongest point of the listing is its cross-reference. It says the set replaces nine Land Rover OE numbers, among them LR047859, LR051626 and LR134700, which makes it easy to check against the number printed on the pads you remove. The listing calls the pads OEM quality made by Delphi, a brand with a long record as a parts supplier to carmakers.
What the listing leaves out is just as important. It gives no compound type, no dimensions and no word on shims, clips or a wear sensor, so inspect the box before the old pads come off. This set suits owners who want a straight OE-number replacement and are happy to reuse good hardware. Buyers who want a full spec sheet will find more detail on the Brembo listings.
Brembo P44022: Low-Met Front Brake Pad Set for Land Rover OE LR047859

- Low-metallic alloy steel compound
- Same OE LR047859 front fitment
- Chamfered and slotted for less vibration
- Installation hardware listed in the box
The P44022 is the low-metallic twin of the P44022N, and its Amazon title quotes the same Land Rover OE number, LR047859. In Brembo’s North American range, the missing “N” suffix marks a low-met compound rather than a ceramic one. We include it as a closely related third pick because some LR4 owners use their vehicle for jobs that heat the brakes hard.
A low-metallic alloy steel compound tends to hold up better under repeated hard stops, such as a long downhill with a trailer or a fully loaded trip. The listing points to chamfers and slots that cut vibration and noise, and says all the hardware needed for installation is in the box. Brembo also states that the material meets or exceeds the original manufacturer’s specs.
Expect more brake dust on the wheels and, on some vehicles, a little more noise than the ceramic set. The listing does not say whether a wear sensor is included, so plan to buy one if your dash warning is on. This set suits owners who tow a boat or camper in summer or regularly carry heavy loads. Drivers who mostly commute will be happier with the ceramic version.

Ceramic or Low-Met on a Heavy SUV
The LR4 is a big, heavy vehicle, and that weight changes the pad conversation more than the logo does. A ceramic compound gives quieter stops and cleaner wheels, while a low-metallic compound handles heat better when the brakes work hard for a long stretch. Think about the hardest job your LR4 does, not the average commute.
| How you use the LR4 | Leaning | Reason |
|---|---|---|
| School runs and highway commuting | Brembo P44022N | Ceramic, low dust, shim included |
| Towing a boat or camper | Brembo P44022 | Low-met compound copes with repeated heat |
| Matching what came off the car | Delphi LP2176 | Long OE cross-reference list |
| Doing the job in a driveway | Brembo P44022N | Bolts and accessories listed in the box |
Low-met pads usually make more dust and a little more noise, so they suit owners who accept dirty wheels in exchange for steady bite under load. If towing is a regular part of your summer, our page on brake pads for winter driving also covers how compounds behave when cold, which matters on the first stops of a January morning.

Pad life on a vehicle this heavy depends far more on route and load than on the brand. City driving with a full cabin wears pads much faster than open highway miles, and our article on how long brake pads last explains what speeds up or slows down that wear. Measure the remaining lining at every tire rotation so the sensor warning never comes as a surprise.
Sensors, Salt and the Hardware Around the Pads
Land Rovers of this era typically use an electronic pad wear sensor that clips into the pad and lights a warning on the dash when the lining runs low. Brembo’s catalogue says the P44022N is prepared for a wear indicator, which means the sensor is a separate part. Once a sensor has triggered, its tip has usually worn through, so budget for a new one with the pads.
The dash warning works much like the system our explainer on the Audi brake pad warning light describes, and the same rule applies: a lit warning is a cue to book the job soon. Ignoring it on a heavy SUV lets the backing plate reach the rotor quickly.

Around Grand Rapids, the compound is seldom the part that fails first. Winter salt packs into the caliper bracket, swells rust under the pad ears and makes slide pins stick, which leads to uneven wear and a dragging corner. Whichever brand you choose, clean the bracket to bare metal, use brake-rated grease on the pins and replace bent or rusted clips.
Check the rotors while the wheels are off. The minimum thickness is cast or stamped on each rotor, and one at that figure, or one that is scored or deeply pitted from salt, should be replaced along with the pads. Then bed the new pads in with a series of moderate stops before you rely on them for a hard one.
When the LR4 Brakes Need a Shop

New pads fix worn friction material and nothing else. A pull to one side, a shudder through the steering wheel, a hot smell from one wheel or a pedal that sinks all point to calipers, rotors or fluid. Have those checked before you spend money on any pad set, whichever side of the Brembo vs Delphi debate you land on.
The LR4 also brings European-car quirks, from sensor wiring to electronic systems that may need a scan tool after brake work. Our brake repair in Grand Rapids covers pads, rotors, calipers and hardware, and our foreign car repair service handles the rest of a European SUV. Hendrick holds ASE and State of Michigan certification in brakes, among other areas.
More Buying Guides
Frequently Asked Questions
Is Delphi as good as Brembo for brake pads?
Both sell pads matched to original part numbers, so either can do the job on a supported vehicle. The difference on Amazon US is information: Brembo publishes compound, size and hardware details, while the Delphi LP2176 listing gives fitment and OE numbers only.
Why can’t I find Delphi brake pads for my car in the US?
Delphi’s US site lists fuel, ignition, chassis and electronics parts but no brake pad category. Its LP pad range is aimed mainly at European markets, so only a handful of sets reach Amazon US, mostly for European vehicles.
Do I need a new wear sensor when I change LR4 front pads?
Usually, yes. The sensor clips into the pad, and once it has triggered the dash warning its tip is normally worn through. Brembo’s catalogue lists the P44022N as prepared for a sensor rather than including one, so order it separately.
Will these pads fit a Range Rover Sport too?
Some versions, possibly. The Delphi listing names several Range Rover and Range Rover Sport years, but Land Rover used different front brake sizes by engine and year. Match the number on your old pads or use Amazon’s fit checker before ordering.
Seeing a pad warning on the dash or hearing a grind from the front? Phone 456 AutoFix on 616-279-3832, Monday to Friday 8am to 5pm, or ask for a brake inspection through our contact page.
Tied up at work until after five? Bring the LR4 to 456 Carrier St NE after closing, use the after-hours drop-off with a short note about the warning, and we will ring you once we have looked it over.
