456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

JK or JL? The Best Fog Lights for Jeep Wrangler by Year and Bumper

best fog lights for jeep wrangler: road winding through hills on a sunny day

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the year, bumper and trim your Wrangler needs before you order.

A Wrangler sits upright, wears its fog lamps low in the bumper and often drives the worst roads in the county. The best fog lights for Jeep Wrangler owners are the ones built for your generation and bumper, with a real fog beam that lights the pavement under the haze instead of lighting up the haze itself.

Below we sort the options by JK and JL, explain the beam ratings, then review six lamps. Confirm your year, trim and bumper on Amazon before you buy.

Quick answer

What fog lights fit my Jeep Wrangler?

Match the lamp to your generation and bumper. A JL with the plastic bumper takes OE-style swaps such as the Diode Dynamics Elite Series, a Sahara bumper fits the Baja Designs Squadron-R pocket kit, and a Rubicon steel bumper needs a kit made for it. JK owners have plug-in 4-inch rounds and Elite Series lamps.

Our Quick Picks

Three lamps that cover the main Wrangler setups: a JL with the plastic bumper, a JL Sahara bumper and a 2007-2018 JK.

Diode Dynamics Elite Series JL product photo
JL plastic bumper

Diode Dynamics Elite Series JL

SAE F3 | 3000K yellow | pair

OE-style LED fog lamps that bolt in where the factory JL lamps sit.

SuitsJL Sahara, Willys or Rubicon with the plastic bumper
View on Amazon →
Baja Designs Squadron-R SAE Sahara Kit product photo
JL Sahara bumper

Baja Designs Squadron-R SAE Sahara Kit

SAE J583 | 2,420 lm | amber

A complete pocket kit with brackets that fits the Sahara bumper openings.

SuitsJL Wrangler 2018-25 and JT Gladiator with the Sahara bumper
View on Amazon →
Diode Dynamics Elite Series JK product photo
JK 2007-2018

Diode Dynamics Elite Series JK

SAE F3 | 3000K yellow | pair

A direct-fit LED fog lamp pair with a true fog pattern for the JK bumper.

SuitsJK and JKU owners keeping the factory bumper
View on Amazon →

Start With Your Generation and Bumper

The JK ran from 2007 to 2018 and the JL arrived for 2018, so a 2018 model year can be either one. Check which generation you have before you shop.

  • JK (2007-2018): round fog lamps sit in the factory bumper. The Hard Rock, Rubicon X and 10th Anniversary bumpers use different mounts, so read each listing’s note.
  • JL with a plastic bumper: Diode Dynamics’ JL fitment note lists its plastic bumper kit for Sahara, Willys and Rubicon trims that came with plastic. Baja Designs sells a pocket kit made only for the Sahara bumper.
  • JL Rubicon with the steel bumper: buy the version that names the steel bumper.
  • No factory fog lamps: Diode Dynamics notes that a Jeep without fog lamps may need extra hardware and wiring, so plan for more than a bolt-in swap.

Beam Ratings, Color and Plug-and-Play Wiring

A lot of round LED lamps sold for Jeeps are off-road driving lights wearing a fog label. A true fog beam is wide and flat with a sharp top cutoff, which is what SAE fog ratings such as J583 and F3 describe. Look for that rating on the listing, and treat “spot,” “flood” or “combo” as trail lighting.

Color is mostly preference. Diode Dynamics says its selective yellow improves contrast in rain, snow, fog and dust, while cool white matches other LED lighting on the Jeep. Plug-and-play kits use adapters that connect to the factory fog sockets, so the factory switch still runs them.

Many plug-in LED retrofits are not DOT-approved for halogen housings, so a complete lamp is the cleaner route to a sharp pattern. Our guide to LED headlight bulbs explains bulb sizes and housing types for the main beams.

Best Fog Lights for Jeep Wrangler, Sorted by Year and Bumper

Three picks suit the JL and three suit the JK. Four carry an SAE fog rating, and the two JK rounds are listed as DOT approved.

1. Diode Dynamics Elite Series JL: SAE F3 Selective Yellow LED Fog Lamp Pair with Amber Backlight

Diode Dynamics Elite Series JL product photo
Key features
  • Listed for 2018-2026 Jeep JL Wrangler
  • SAE F3 fog rating for road use
  • 3000K selective yellow main beam
  • Plug-and-play adapters for factory sockets

The Elite Series is an OE-style replacement for the factory fog lamps on the 2018-2026 JL Wrangler. Instead of a bulb in the old housing, you get a complete LED lamp with its own optic, and the listing states it meets the SAE F3 fog standard for road use. This version puts out 3000K selective yellow light, plus an integrated amber backlight.

Diode Dynamics describes a custom optic with an 80-degree spread and a sharp cutoff, which keeps the light low and wide where a fog beam belongs. Installation is meant to be simple: remove the factory lamp, bolt the new one in place and connect the waterproof adapters to the stock bulb sockets, so the factory switch still controls them.

The maker sells separate kits for the plastic bumper on Sahara, Willys and Rubicon trims and for the Rubicon steel bumper, so check which version the listing ships before you order. A JL that left the factory without fog lamps may need extra hardware and wiring. If you prefer white light that matches other LEDs on the Jeep, Diode Dynamics also offers a 6000K version.

View Diode Dynamics Elite Series JL on Amazon

2. Baja Designs Squadron-R SAE: Amber LED Fog Pocket Kit for JL Sahara Bumper, 2,420 Lumens

Baja Designs Squadron-R SAE Sahara Kit product photo
Key features
  • Built for the OEM Sahara plastic bumper
  • SAE J583 fog beam with sharp cutoff
  • 2,420 lumens at 29 watts
  • IP69K waterproof and dustproof rating

This kit takes the compact Squadron-R SAE lamp and packages it for one bumper: the OEM Sahara plastic bumper on the JL Wrangler from 2018 to 2025 and the JT Gladiator from 2020 to 2025. The listing says the box includes everything needed for that bumper, with two LED lamps and mounting brackets. This version has the amber lens.

Baja Designs states the lamps are designed to meet the SAE J583 fog lamp requirements, giving a controlled pattern with a sharp cutoff for dust, fog and bad weather. The listing quotes 2,420 lumens from 29 watts, aspheric projector optics and an IP69K rating against water, dust and impact. Heat runs out through the housing instead of building up inside, which helps the lamps hold steady output on long drives.

The narrow fitment is the main thing to check. This kit is for the Sahara bumper only, so a Rubicon steel bumper or an aftermarket bumper needs a different mount, and a plastic-bumper Sport may not match either. Confirm your year, trim and bumper on the listing. It suits owners who want a projector-style fog beam in a factory-looking position rather than a round lamp.

View Baja Designs Squadron-R SAE Sahara Kit on Amazon

empty two-lane road through open country

3. Diode Dynamics SS3 Sport: SAE/DOT Yellow LED Fog Kit for JL Rubicon Steel Bumper with Backlight

Diode Dynamics SS3 Sport JL Rubicon Kit product photo
Key features
  • Listed for 2018-2026 JL Rubicon with steel bumper
  • SAE-compliant fog output
  • TIR optics for focused, efficient light
  • Plug and play, designed and assembled in the USA

Rubicon trims with the factory steel bumper need a lamp made for that bumper, and this kit is built for them. It pairs two Diode Dynamics SS3 Sport pods with the parts to fit the JL fog light housing in that bumper, and the listing names 2018-2026 JL Wrangler Rubicons with the steel bumper. The yellow lens version also has a backlight for an accent glow.

The listing describes SAE-compliant, road-legal output and TIR optics, a lens design that gathers the LED light and shapes it efficiently into a focused pattern. Installation is plug and play with no modification needed, and the kit is designed and assembled in the USA. The SS3 is a compact square pod, so the look is more off-road than the round factory lamps, while the beam stays a fog pattern.

Check the bumper before you buy. This kit is not meant for the plastic bumper, which takes the Elite Series or Sahara-specific kits above, and aftermarket steel bumpers vary in their mounts. Aim the pods after installation so the top of the beam stays low for oncoming drivers.

View Diode Dynamics SS3 Sport JL Rubicon Kit on Amazon

4. Diode Dynamics Elite Series JK: SAE F3 Selective Yellow LED Fog Lamp Pair for 2007-2018 Wrangler

Diode Dynamics Elite Series JK product photo
Key features
  • Listed for 2007-2018 Jeep JK Wrangler
  • SAE F3 fog rating for road use
  • Integrated amber backlight
  • Bolts in place of the factory fog lamps

The JK version of the Elite Series follows the same idea as the JL lamp: a complete LED fog lamp that replaces the factory unit on the 2007-2018 Wrangler rather than a bulb dropped into the old reflector. The listing states SAE F3 compliance for road use, and this pair uses 3000K selective yellow light with the integrated amber backlight that every Elite lamp carries.

Diode Dynamics designed the lamps around a 3D scan of the vehicle, and the maker says they bolt in where the factory assembly came out using reinforced brackets. Waterproof plug-and-play adapters connect to the stock sockets, so the factory switch still runs them, and each lamp has adjustment for aiming. The optic is built for a wide pattern with a sharp top cutoff, which keeps light on the road surface in fog or blowing snow.

Older JKs often have tired or hazy factory fog lenses, and this is a direct way to replace them with a sealed LED unit. Check whether your Jeep still has the factory bumper, since aftermarket bumpers can use different mounts. Owners who want a brighter look with a halo or turn signal should compare the round 4-inch options below, which trade the SAE fog rating for extra functions.

View Diode Dynamics Elite Series JK on Amazon

detailed close-up of a large rusty industrial pipe with bolts

5. Xprite 4-Inch LED Fog Lights: 60W White, 4800LM, DOT Certified for 2007-2018 Wrangler JK

Xprite 4-Inch JK LED Fog Lights product photo
Key features
  • Listed for 2007-2018 Wrangler JK and JKU
  • 4800LM, 6500K white output
  • IP67 sealed housing, DOT certified per listing
  • Plug-and-play conversion cables included

Xprite’s 4-inch round lamps are a direct replacement for the factory fog lights on the 2007-2018 Wrangler JK and JKU. The listing quotes 60 watts and 4800 lumens of 6500K white light, which is a clear step up in brightness and color from the yellowish factory halogen lamps. The housings are sealed to IP67, and Xprite states the lamps carry DOT certification.

Installation uses the existing mounting points. The pair comes with plug-and-play conversion cables that use female sockets made for the factory male plugs, so check your connectors first. Xprite also asks buyers to confirm the Jeep has the 4-bolt mounting points before ordering, which is a quick look behind the bumper.

Fitment has one firm exclusion: the listing says these do not fit the Hard Rock or 10th Anniversary bumpers. They suit JK owners with a stock bumper who want bright white light and a modern round look. The listing does not name an SAE fog beam pattern, so aim them carefully after installation and keep them low. If you drive in heavy fog or snow often, an SAE-rated fog lamp gives a more controlled cutoff.

View Xprite 4-Inch JK LED Fog Lights on Amazon

6. Auxbeam 4-Inch LED Fog Lights: DOT Approved with DRL and Amber Turn Signals for Wrangler JK

Auxbeam 4-Inch JK LED Fog Lights product photo
Key features
  • Listed for 2007-2018 Wrangler JK and JKU
  • DRL and amber turn signal functions
  • IP67 waterproof rating
  • Adjustable light angle, plug and play

Auxbeam’s 4-inch rounds are built for the 2007-2018 Wrangler JK and JKU, and the listing calls them DOT approved. They add two functions the factory lamps lack: a daytime running light ring and an amber turn signal. That makes them a fit for owners who want the front of the Jeep to look more modern while keeping the fog lamps in the stock position.

The listing describes a plug-and-play install with no modification needed, a job the listing puts at tens of minutes. The lens is a PC cover that Auxbeam says resists scratches better than ordinary plastic. The lamps are rated IP67 for rain and bad weather, and the light angle is adjustable, which helps when you aim them after the swap.

Bumper notes matter here too. Auxbeam lists the Hard Rock, Rubicon X and 10th Anniversary Edition bumpers as needing an additional bracket, so plan for that if your JK has one. Read the included instructions before you start, since these lamps do more than a plain fog lamp. The listing does not quote an SAE fog rating, so these suit style and daytime visibility more than heavy fog.

View Auxbeam 4-Inch JK LED Fog Lights on Amazon

Which Lamp Fits Which Wrangler

Narrow the list to your Jeep with this table, then confirm the details on the listing. If two lamps fit, pick the SAE fog rating for snow and fog, or the Auxbeam rounds for DRL and turn signal functions.

LampWrangler and bumper (as listed)Rating on the listingColor
Diode Dynamics Elite Series JLJL, 2018-2026SAE F3 fogSelective yellow, amber backlight
Baja Designs Squadron-R SAEJL 2018-25 with OEM Sahara bumperSAE J583 fog, IP69KAmber lens
Diode Dynamics SS3 SportJL Rubicon with steel bumperSAE/DOT fogYellow, with backlight
Diode Dynamics Elite Series JKJK, 2007-2018SAE F3 fogSelective yellow, amber backlight
Xprite 4-inch LEDJK/JKU, not Hard Rock or 10th AnniversaryDOT certified, IP67White
Auxbeam 4-inch LEDJK/JKU, extra bracket for some bumpersDOT approved, IP67White, DRL and amber turn signal
Jeep Wrangler fog light fitment and ratings compared, from each Amazon listing
tranquil rural road winding through fields under a calm evening sky

Snow, Salt and Aiming in West Michigan

Wrangler fog lamps sit right where slush and road salt hit the bumper, so check the IP rating on the listing and rinse the front end after salty drives. A cracked lens lets water in, and a damp lamp can corrode its connector over a few winters of Grand Rapids weather.

Aim new lamps before night driving. Park on level ground facing a wall, mark the lamp centers and adjust each one so the top of the beam sits below that mark, following the maker’s own figure where it gives one. A lift or bigger tires changes the height, so re-aim after either.

winter scene: long exposure

Turn fog lamps off on clear nights, because even a well-aimed pair adds glare for oncoming drivers. Check Michigan’s rules on auxiliary lamps if you add lights beyond the factory pair.

Electrical Trouble After the Swap

If the fuse blows the moment you switch the new lamps on, look for a pinched wire or a corroded socket, and read our guide on why a car fuse keeps blowing. A backlight or DRL wire tapped into constant power can slowly drain the battery while the Jeep sits.

foggy street at night illuminated by streetlights

If your Wrangler starts slow after an install, our article on why a car battery dies overnight covers how to find a parasitic draw. When the lamps stay dark on one side or the switch does nothing, our shop handles car electrical repair in Grand Rapids for foreign and domestic vehicles, Jeeps included.

Frequently Asked Questions

What are the best fog lights for Jeep Wrangler JL models?

It depends on the bumper. Plastic-bumper JLs can take the Diode Dynamics Elite Series, Sahara bumpers fit the Baja Designs Squadron-R SAE pocket kit, and Rubicons with the steel bumper need a steel-bumper kit such as the Diode Dynamics SS3. Confirm the bumper named on the listing.

Are aftermarket LED fog lights street legal on a Wrangler?

Look for an SAE fog rating such as J583 or F3, or a DOT marking, on the listing and the lamp. Off-road spot and flood rounds are not fog lamps. Aim the lamps after install and check your state’s rules on auxiliary lights.

Should I choose yellow or white fog lights for my Jeep?

Selective yellow is popular for snow and fog because many drivers find it easier on the eyes in bad weather. White matches other LED lighting on the Jeep. A good cutoff matters more than color.

Can I add fog lights to a Wrangler Sport that came without them?

Usually yes, but it is more than a bolt-in job. Diode Dynamics notes that a Jeep without factory fog lamps may need extra hardware and wiring. Use a relay and fuse for any new circuit.

Jeep fog lamps dead, dim or popping fuses? Ring 616-279-3832 Monday to Friday from 8am to 5pm, or send us a note through the contact page to book an electrical diagnosis.

If your schedule keeps you on the road all day, bring the Wrangler to 456 Carrier St NE after hours and use the drop-off, leaving a quick note on which lamp fails and when it happens.