As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Ram has fitted the 1500 with at least five different headlamp setups since 2009, and each one takes its own bulb sizes. The best LED headlight bulbs for Ram 1500 trucks are simply the ones made in the size your housing already uses, with chips placed where the halogen filament sat.
Below, the sizes are sorted by year and housing, then matched to six listings. For other makes, see our LED headlight bulb buying guide.
Quick answer
Which LED bulbs fit a Ram 1500?
Most halogen Ram 1500 trucks from 2013 to 2018 without projectors take H11 low beams and 9005 high beams, so a Ram-specific H11 and 9005 combo is the simplest buy. Projector trucks use 9012 (2013-2015) or 9005 (2016-2019) low beams, and older two-lamp trucks use one 9008/H13 bulb per side.
Our Quick Picks
Three starting points: a Ram-specific combo for quad reflector lamps, a 9005 pair for high beams and projector low beams, and an H13 pair for two-lamp trucks. All six listings are reviewed below.

CHOPDARK Ram 1500 H11 + 9005 Combo
Both beams in one box, listed for Ram quad reflector lamps.

AUTOONE 9005 LED Bulbs
One size that covers the high beam on nearly every halogen Ram.

SEALIGHT H13/9008 LED Bulbs
One bulb per side handles both low and high beam.
What Size Headlight Bulb Does a Ram 1500 Take?
The answer depends on two things: the model year and whether your truck has plain reflector lamps or projector lamps. Bulb makers’ charts agree on the sizes below, but read the number printed on the base of the old bulb before you order.
| Years and housing | Low beam | High beam | Notes |
|---|---|---|---|
| 2009-2012, two headlamps | 9008/H13 | Same bulb | One dual-filament bulb per side |
| 2009-2012, four headlamps | H11 | 9005 | Separate low and high bulbs |
| 2013-2018, no projector (quad reflector) | H11 | 9005 | The most common halogen setup |
| 2013-2015, projector | 9012 | 9005 | Round lens in front of the low beam |
| 2016-2019, projector | 9005 | 9005 | Same size in both positions |
| 2019 and later, factory LED lamps | No plug-in bulb | No plug-in bulb | LED modules are part of the lamp |
Quad Reflector, Projector or Factory LED: How to Tell
Look into each headlamp with the lights off. A quad reflector lamp shows two chrome bowls side by side, each with a bulb in the middle. A projector lamp shows a round glass lens, a little smaller than a coffee mug, ahead of the low-beam bulb.
Reflector bowls are fussy about where the light comes from, so they need a slim LED board with chips sitting right where the filament was. Our guide to LED bulbs for reflector housings explains why. Projectors forgive a little more because a shield trims the beam, and the projector headlight bulb guide covers chip rotation inside the lens.
If your newer Ram has LED headlamps from the factory, there is no halogen-size socket to upgrade. A dim or failed factory LED lamp is usually an assembly or wiring fault, not a bulb swap.
Best LED Headlight Bulbs for Ram 1500: Six Listings by Bulb Position
Each listing below covers one size or one Ram-specific combo. Confirm your year, housing and the number on your old bulb on Amazon before buying, because no single listing fits every version of the truck.
1. CHOPDARK Ram 1500 Combo: H11 Low and 9005 High Beam, 6000K

- 2x H11 low beam and 2x 9005 high beam
- Listed for Ram 1500 2013-2022 quad reflector halogen
- 6000K white, IP68 rated
- Copper heat pipes and cooling fan
The CHOPDARK combo is one of the few listings built around the Ram 1500 itself rather than a bulb size. The box holds four bulbs: two H11 bulbs for the low beams and two 9005 bulbs for the high beams. CHOPDARK lists it for 2013 to 2022 trucks with quad reflector halogen lamps and says plainly that it does not fit the Sport projector version.
Each bulb is rated at 35 watts with a 6000K cool white color. Cooling comes from two copper heat pipes on a copper board, an aluminum body and a small fan, and the bulbs carry an IP68 rating against water and dust. The listing describes the install as plug and play, with no changes to the housing.
Buying both beams together saves matching two separate orders, and it keeps the color the same across all four lamps. It is the most direct option for the common quad reflector setup. It does not suit projector trucks, factory LED trucks or anyone whose old bulbs read something other than H11 and 9005, and CHOPDARK itself asks buyers to check the stock bulb number first.
View CHOPDARK Ram 1500 H11 + 9005 Combo on Amazon
2. AHXLRLS Ram 1500/2500/3500 Kit: 9005 High and H11 Low Beam Bulbs

- 9005 high beam and H11 low beam set
- Listed for 2009-2012 four-lamp and 2013-2018 non-projector trucks
- Names Tradesman, Big Horn and Lone Star for 2019-2025
- 6500K white with 12,000 RPM fan
AHXLRLS sells this set as a high and low beam kit for the Ram 1500, 2500 and 3500, using 9005 bulbs for high beam and H11 bulbs for low beam. Its fitment note is more detailed than most. It lists four-headlamp trucks from 2009 to 2012, trucks without projectors from 2013 to 2018, and 2019 to 2025 trucks in Tradesman, Big Horn and Lone Star trim.
The bulbs give a 6500K white light and use an aviation aluminum body with a hollow heat sink and a 12,000 RPM fan. The maker describes a near 1:1 size that fits under the rubber dust covers and an install of five to ten minutes. A built-in driver is listed as CANbus ready, though the listing warns that some sensitive trucks still need a decoder or anti-flicker harness.
Two points need attention before you order. The listing says the bulbs are for off-road use only, and it excludes the Ram ProMaster van. For a halogen pickup that matches the years and housings named, it is a useful second choice to the CHOPDARK combo, especially on 2009 to 2012 four-lamp trucks, which the CHOPDARK listing does not cover.
View AHXLRLS Ram 9005 + H11 Kit on Amazon

3. AUTOONE 9005 LED Bulbs: 6500K High Beam Pair, CANbus Ready

- 9005/HB3 size, pack of 2
- Lists Ram 1500/2500/3500 2011-2022
- Halogen-size body, twist-in install
- 18-month warranty
Almost every halogen Ram 1500 since 2011 uses a 9005 bulb for the high beam, and projector trucks from 2016 to 2019 use the same size for the low beam too. That makes a 9005 pair the one size most owners can use somewhere on the truck. AUTOONE’s listing names the Ram 1500, 2500 and 3500 from 2011 to 2022 in its long compatibility list.
The bulbs are sold as a pair with a 6500K white color and a body sized close to the halogen original. AUTOONE describes a simple install: remove the old bulb, push the new one into the housing and turn it clockwise to lock. The title calls the bulbs CANbus ready, and the pair carries an 18-month warranty from the date of purchase.
On a projector truck from 2016 to 2019, you need two pairs to cover both beams. On a quad reflector truck, this pair handles the high beams only, so you would pair it with an H11 bulb for the low beams or choose a combo instead. As always, read the number on the old bulb, since 9005 and 9006 bulbs look alike but have different bases.
View AUTOONE 9005 LED Bulbs on Amazon
4. AUXITO M3S H11 LED Bulbs: 16-Chip Low Beam Pair with Fan

- H11 size (also H8/H9), pack of 2
- 16 chips on an ultra-slim board
- Cooling fan, IP68 rated
- Built-in driver, CANbus ready for most vehicles
If your high beams are already sorted, or you simply want to replace the low beams first, an H11 pair covers the low-beam position on 2013 to 2018 Ram 1500 trucks without projectors and on four-lamp trucks from earlier years. The AUXITO M3S is a generic H11 bulb rather than a Ram kit, so it suits owners who have already confirmed their size.
AUXITO describes a very thin board, 0.03 inches, carrying 16 chips around the bulb. A thin board matters in a reflector bowl, because it keeps the light source close to where the halogen filament sat. The bulb uses an aluminum body, a copper substrate and a high-speed fan, and AUXITO rates it IP68 with a 60,000-hour lifespan.
The listing says the body is sized to fit under the stock dust covers without extra parts, and its built-in driver is meant to prevent flicker and error codes on most vehicles. AUXITO still suggests checking your manual or old bulb before ordering. This pair does nothing for the high beams, and it does not fit projector trucks, which use 9012 or 9005 for the low beam.
View AUXITO H11 LED Bulbs on Amazon

5. AUTOONE 9012/HIR2 LED Bulbs: 6500K Projector Low Beam Pair

- 9012/HIR2 size, pack of 2
- Integrated driver, no external box
- Turbo fan with copper substrate
- IP68 rated, CANbus ready
The 9012 size is the odd one out on the Ram 1500. Fitment charts list it only for the low beam on 2013 to 2015 trucks with projector headlamps, which is why owners of those trucks often struggle to find a Ram-specific kit. A generic 9012 pair like this one from AUTOONE fills that gap.
AUTOONE describes a 6500K white light and a one-piece design with the driver built into the bulb, so there is no separate box to mount behind the lamp. The body uses aviation-grade aluminum with a copper substrate and a high-speed fan, and the listing gives an IP68 rating and a lifespan of more than 70,000 hours. It is also described as CANbus ready against flicker and dashboard errors.
Inside a projector, the lens and shield shape the cutoff, but the chips still need to sit in the filament position and face the sides of the bowl. After fitting, check the beam on a wall and adjust the aim if it sits higher than before. AUTOONE itself notes that Amazon’s fitment filter can be wrong, so confirm the 9012 marking on your old bulb first.
View AUTOONE 9012 LED Bulbs on Amazon
6. SEALIGHT H13/9008 LED Bulbs: Dual-Beam Pair with Cooling Fan

- H13/9008 dual-beam size, pack of 2
- 24 chips, 6500K white
- 25,000 RPM fan, IP68 rated
- Built-in CANbus, non-polarized plug
Earlier Ram 1500 trucks with two headlamps instead of four use a single 9008/H13 bulb on each side, with one filament for low beam and one for high. That means one pair of bulbs replaces both beams. The SEALIGHT H13/9008 is a generic dual-beam bulb in this size, so it suits 2009 to 2012 owners whose old bulb carries that number.
SEALIGHT lists 24 chips, a 6500K cool white light and a design meant to copy the halogen beam pattern with a defined cutoff line. The body is aluminum with a hollow structure and a 25,000 RPM fan, and the rubber ring gives an IP68 rating. The plug is non-polarized, so it should connect either way round.
The listing calls the bulbs CANbus ready and says they work in most vehicles, but it also asks owners to contact SEALIGHT if a decoder is needed. Its title mentions fog lights as well, so read the packaging on road use before you rely on them. These bulbs will not fit four-lamp trucks or any later Ram that uses separate H11 and 9005 bulbs.
View SEALIGHT H13/9008 LED Bulbs on Amazon
Installing LED Bulbs in a Ram 1500 Without Flicker or Glare
Before you start, park on level ground about 25 feet from a wall, switch on the low beams and tape a mark at the top edge of each beam. That mark is your reference for the new bulbs.
- Seat it fully: a bulb that sits a few millimeters proud raises the beam and scatters light.
- Turn the chips sideways: most makers want the LEDs facing left and right, at about 3 and 9 o’clock.
- Refit the dust cover: make sure it seals over the fan.
- Test one side first: start the truck, run both beams and watch for flicker or a bulb-out message before you fit the second bulb.

Flicker or a dash warning usually means the truck’s lighting module expects the current draw of a halogen bulb. Several of these listings say they are CANbus ready but add that some vehicles still need a separate decoder or anti-flicker harness. Fit that between the bulb and the factory plug, as the bulb maker directs.
Then compare the cutoff with your tape mark and use the adjuster on the headlamp if the beam sits higher. Many plug-in LED retrofits are not DOT-approved for halogen housings, and some listings here say off-road use outright, so read the packaging before you rely on them on public roads. Our LED vs halogen headlight bulbs comparison weighs that trade-off.
Night Driving in a Ram Through a West Michigan Winter
Plenty of roads around Grand Rapids have no overhead lighting, and that is where low beams fall short. In AAA’s headlight testing, halogen low beams may fail to light unlit roads safely at speeds as low as 40 mph, while HID and LED lamps reached about 25 percent farther. AAA also urges using high beams on unlit roads, so the 9005 high beam deserves an upgrade too.

Winter adds its own problems. Road salt films the lenses within a few miles, and falling snow bounces cool white light back at the driver, so a 6000K bulb can feel harsher in a storm than in clear weather. Wipe the lenses at fuel stops, and if the plastic has gone yellow, a headlight restoration kit for hazy lenses may help more than new bulbs.
Picking among the best LED headlight bulbs for Ram 1500 trucks is only half the job. Running extra lamps too? See our guide to the right battery for a Ram 1500.
When the Headlight Problem Isn’t the Bulb
A headlight that dies again within days of a new bulb points to the circuit, not the part. A burned connector, a corroded ground or a short can take out the same fuse over and over, and our article on why a car fuse keeps blowing walks through how that gets traced.

Lights that stay on after you lock the truck, or a module that never goes to sleep, can drain the battery while it is parked. Our guide to a car battery that dies overnight explains the usual culprits. For melted sockets, flicker a decoder will not cure or a factory LED lamp that has gone dark, our car electrical repair in Grand Rapids covers lighting and wiring diagnosis.
More Buying Guides
Frequently Asked Questions
What size headlight bulb is in a 2013-2018 Ram 1500?
Trucks without projectors use an H11 low beam and a 9005 high beam. Projector trucks use a 9012 low beam for 2013 to 2015 and a 9005 low beam for 2016 to 2018, with a 9005 high beam on both. Check the old bulb to be sure.
Do LED bulbs work in Ram 1500 projector headlights?
Yes, if you buy the projector size for your year and the chips sit in the filament position. Rotate the chips to face the sides and check the cutoff on a wall afterward.
Why do my LED headlights flicker on my Ram?
The lighting module may expect a halogen bulb’s current draw. A CANbus-ready bulb solves this on many trucks, but some need a separate decoder or anti-flicker harness from the bulb maker.
Can I put LED bulbs in a Ram 1500 with factory LED headlights?
No. Factory LED headlamps have built-in light modules rather than a halogen-size socket, so a failed one needs diagnosis or a new lamp assembly instead of a bulb.
Ram headlights still dim, flickering or dropping out after a bulb swap? Ring 456 AutoFix on 616-279-3832, Monday to Friday from 8am to 5pm, or set up a visit through our contact page.
Can’t get away from work in the day? Bring the truck to 456 Carrier St NE in Grand Rapids and use the after-hours drop-off, with a quick note about which beam is giving trouble.
