As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Differential fluid is easy to forget because it sits low in the axle, out of sight, and lasts a long time. Picking the best gear oil for differentials comes down to three things printed on your owner’s manual page and the bottle: viscosity, the API rating and whether your axle has a limited-slip unit.
Below we cover those labels, then review six oils for everyday cars, limited-slip axles, towing trucks and older vehicles. If the transmission is also due for fresh fluid, our guide to transmission fluid for high-mileage cars covers that side of the drivetrain.
Quick answer
Which gear oil should go in my differential?
Use the viscosity and spec your owner’s manual lists, usually an API GL-5 oil in 75W-90, 80W-90 or 75W-140. A full synthetic 75W-90 with limited-slip additive, such as Valvoline Advanced or Mobil 1 LS, suits most cars and light trucks. Heavy towing axles often call for 75W-140.
Our Quick Picks
Three picks for the most common axle setups: everyday driving, clutch-type limited slip and heavy towing. All six oils are reviewed below.

Valvoline Advanced Full Synthetic 75W-90
A full synthetic 75W-90 that needs no separate friction modifier.

Mobil 1 Synthetic Gear Lube LS 75W-90
A synthetic multi-purpose gear oil that already includes limited-slip friction additive.

Valvoline Advanced Full Synthetic 75W-140
A heavier synthetic grade for axles that specify 75W-140.
Viscosity, GL Rating and Limited Slip: Reading the Label
A differential lets the wheels on one axle turn at different speeds in a corner. Most use hypoid gears, whose teeth slide against each other under heavy pressure, so they need a dedicated gear oil rather than engine oil.
- Viscosity: the first number (75W, 80W) describes cold flow, and the second (90, 140) describes thickness when hot. Gear oil uses its own scale, separate from motor oil.
- API GL-5: the rating most hypoid differentials call for. It signals a high level of extreme-pressure (EP) additive.
- GL-4: a lighter EP level used in many manual gearboxes. Some GL-5 oils are also approved for GL-4 use, but only where the label says so.
- Limited-slip additive: clutch-type limited-slip units need a friction modifier. Some oils include it, and others need a separate bottle.
The manual is the final word. A factory fluid or spec number listed there outranks anything on a store shelf.
Open, Limited-Slip or Heavy-Duty Axle: Which One You Have
An open differential is the simplest kind and works with any GL-5 oil of the right grade. A clutch-type limited-slip unit uses friction plates to send power to the wheel with grip, and the wrong oil can make those plates chatter or groan in tight turns. Heavy-duty truck axles that tow or haul often call for a thicker 75W-140 to hold up under heat.
Not sure which you have? Look for a tag on the axle cover, then confirm in the owner’s manual or with the dealer before adding any friction modifier.
Best Gear Oil for Differentials: Six Bottles Compared
Four 75W-90 oils come first, then a 75W-140 for towing axles and an 80W-90. Specs come from each Amazon listing, so match them to your manual.
1. Mobil 1 Synthetic Gear Lube LS 75W-90: Multi-Purpose Gear Oil with Limited-Slip Additive

- Full synthetic SAE 75W-90
- Built for limited-slip applications
- Multi-purpose automotive gear lubricant
- Wide operating temperature range
Mobil 1 Synthetic Gear Lube LS 75W-90 is a full synthetic, multi-purpose gear oil aimed at modern passenger cars and light trucks. The LS in the name stands for limited slip: Mobil formulates it for limited-slip differentials as well as ordinary open axles, so most owners will not need to buy a separate bottle of friction modifier. The listing describes it as suited to all types of operating conditions and highlights its power transfer performance.
Mobil also notes that, compared with conventional hypoid gear oils, this synthetic performs well over a wide range of temperatures. In practice, that matters at both ends of the year in West Michigan. A 75W grade flows sooner on a frozen January morning than a heavier 80W oil, and a synthetic base holds up better once the axle is hot after a long highway drive in August.
It is sold here as a single quart bottle, model 104361. Many car and small SUV differentials take one to two quarts, while full-size truck axles often need more, so check the capacity in your owner’s manual before ordering. This oil is not a fit for a gearbox or axle that calls for a specific factory fluid, a GL-4 rating or a 75W-140 grade. Match the manual first, then the label.
View Mobil 1 Synthetic Gear Lube LS 75W-90 on Amazon
2. Red Line 57904 75W90 GL-5: Synthetic Gear Oil with Friction Modifiers for Hypoid Differentials

- API GL-5, GL-6 and MT-1 rated
- Extra friction modifiers for clutch-type LSDs
- Ester and PAO synthetic base
- Replaces 80W90 or SAE 90 in many diffs
Red Line’s 75W90 GL-5 is a full synthetic gear oil built on polyol ester and PAO base stocks, and the company calls it its go-to oil for most differentials. It carries a long list of ratings on the listing, including API GL-5, GL-6 and MT-1, MIL-L-2105E, SAE J2360 and Chrysler MS-9763. Red Line also says it can replace an 80W90 or SAE 90 oil in a differential that calls for one.
The formula contains additional friction modifiers so it works with clutch-type limited-slip differentials, and Red Line states that most limited-slip units need nothing extra added. The maker also describes the oil as slippery by design, aimed at lowering sliding friction and operating temperature in hypoid gears, with a high viscosity index that keeps its film thickness steadier as temperatures change.
That slipperiness is also its main limit. Red Line warns that this oil is not designed for most manual transmissions or transaxles in passenger vehicles, because it can upset synchronizer engagement and cause shifting problems. If your car shares fluid between the gearbox and differential, or the manual names a GL-4 or factory fluid, choose something else. For a separate rear axle on a performance car or truck, it is a well-known option sold here by the quart.
View Red Line 75W90 GL-5 on Amazon

3. Valvoline Advanced Full Synthetic 75W-90: GL-5 Gear Oil with Limited-Slip Additive, -50F to 300F

- API GL-5 and SAE J2380
- Limited-slip additive included
- Listed range of -50F to 300F
- GL-4 use in non-synchronized gearboxes
Valvoline Advanced Full Synthetic 75W-90 is an everyday differential oil that covers a lot of ground. The listing says it meets or exceeds API GL-5, SAE J2380, Mack GO-J, Meritor 0-94 Rev Level A and GMW 16445. It already contains a limited-slip additive, and Valvoline states that adding a supplemental friction modifier to Ford, Chrysler or GM specs is not required.
Valvoline lists a temperature range from -50F to 300F, which covers cold-start flow in a Grand Rapids winter and heat from summer towing. The maker also claims 1.5 times better gear wear protection from its additive package, along with corrosion inhibitors and resistance to oxidation and thermal breakdown. It describes the synthetic as helping cut gear noise and clutch chatter in limited-slip units.
One useful extra is that Valvoline approves it for non-synchronized manual transmissions that call for GL-4. That is not the same as a typical passenger-car manual gearbox with synchronizers, so do not treat it as a manual transmission fluid unless your manual agrees. It comes in a single quart bottle, made and formulated in the USA. For an open or limited-slip axle that calls for 75W-90 GL-5, it is a sensible default.
View Valvoline Advanced Full Synthetic 75W-90 on Amazon
4. AMSOIL Severe Gear 75W-90: 100% Synthetic Extreme Pressure Gear Lube, Quart Easy-Pack

- 100% synthetic extreme pressure lube
- Aimed at towing, hauling and severe duty
- Resists heat breakdown and varnish
- Quart Easy-Pack format
AMSOIL Severe Gear 75W-90 is a 100% synthetic extreme pressure gear lube aimed at axles that work hard. AMSOIL says it suits all cars and trucks, but it pitches this oil mainly at towing, hauling, racing, commercial use and other severe duty. If your truck pulls a camper to the lakeshore every summer or plows a driveway all winter, that is the kind of use it was built around.
The listing focuses on heat. AMSOIL states that it helps reduce operating temperatures and resists breakdown from high heat, which prevents acids and carbon or varnish from forming inside the axle. It also says the oil performs well at both hot and cold extremes, a useful trait for a vehicle that sits outside through a Michigan winter and then works under load in July.
This version comes in AMSOIL’s quart Easy-Pack format rather than a standard bottle. The Amazon listing does not spell out limited-slip details or API ratings, so check AMSOIL’s own product data or the label against your manual before using it in a limited-slip axle. Choose the 75W-90 grade only where your manual allows it, since some heavy-duty and towing axles call for a 75W-140 instead, and AMSOIL sells that grade separately.
View AMSOIL Severe Gear 75W-90 on Amazon

5. Valvoline Advanced Full Synthetic 75W-140: GL-5 Gear Oil for Heavy Loads and Towing

- API GL-5, Ford M2C-192A, GM 12346140
- Chrysler MS-8985 listed
- Limited-slip additive included
- Listed range of -50F to 300F
Valvoline Advanced Full Synthetic 75W-140 is the heavier sibling of the 75W-90 above, made for axles that specify a thicker oil. Many full-size trucks with towing packages, along with some performance cars, list 75W-140 in the manual. The listing says it meets or exceeds API GL-5, Ford M2C-192A, GM 12346140 and Chrysler MS-8985, plus any application where a GL-5 SAE 75W-140 gear oil is specified.
Like the lighter grade, it already includes a limited-slip additive, and Valvoline says no supplemental friction modifier is required for Ford, Chrysler or GM limited-slip specs. The maker lists the same -50F to 300F temperature range and claims 1.5 times stronger extreme pressure protection and 30 percent better protection under towing and heavy loads, along with corrosion inhibitors and resistance to thermal breakdown.
The thicker 140 grade is the point here, so only use it where your manual calls for it. Putting 75W-140 in an axle designed for 75W-90 adds drag and offers no benefit, and the reverse can shorten gear life on a hard-working truck. It is sold as a single quart bottle, and a full-size rear axle often takes more than two quarts, so check the capacity before you order.
View Valvoline Advanced Full Synthetic 75W-140 on Amazon
6. Triax Gear Premium LS 80W-90: GL-5 Gear Oil with Built-In Limited-Slip Additive, 1 Gallon

- API GL-5, limited slip ready
- Built-in LS additive, no extra bottle
- Polyphosphate EP additive system
- 1 gallon jug
Triax Gear Premium LS 80W-90 is a GL-5 gear oil for vehicles whose manuals call for 80W-90 rather than a 75W grade. That includes many older pickups and SUVs built around the heavier grade. Triax says it covers a very wide range of hypoid gear systems, differentials, transmissions and axle assemblies, and the title notes NATO military approval.
The limited-slip additive is built into the oil, and Triax says it is optimized for limited-slip differentials, including those with built-in wet brakes, so it does not need an extra bottle of modifier. The listing describes a polyphosphate extreme pressure additive system, shear stability that resists thinning under high loads and heat, and scuffing protection that exceeds Load Stage 13 in the maker’s description.
It comes in a one-gallon jug, which makes sense if you are servicing front and rear axles on a four-wheel-drive truck at the same time. Keep in mind that an 80W oil flows more slowly on a cold start than a 75W oil, so it is not a substitute in a vehicle whose manual names 75W-90 or 75W-140. Check the manual’s grade, and any factory spec number, before you pour it in.
View Triax Gear Premium LS 80W-90 on Amazon
Side-by-Side: Which Oil Fits Which Axle
The best gear oil for differentials is the one that matches your axle type, so use this table as a starting point. A maker’s spec in your manual still comes first.
| Axle or use | Grade to look for | Picks from this list | Check first |
|---|---|---|---|
| Open differential, daily driving | 75W-90 GL-5 | Valvoline Advanced 75W-90, Mobil 1 LS 75W-90 | Manual’s grade and any factory spec |
| Clutch-type limited slip | GL-5 with friction modifier | Mobil 1 LS, Red Line 75W90, Triax 80W-90 LS | Whether to add extra modifier |
| Towing, plowing or hauling | 75W-90 or 75W-140 GL-5 | AMSOIL Severe Gear, Valvoline Advanced 75W-140 | Some axles need 75W-140 only |
| Older truck or 80W-90 spec | 80W-90 GL-5 | Triax Gear Premium LS 80W-90 | Cold-weather flow in winter |
If your car shares one fluid between the gearbox and the differential, use the fluid the manual names for that combined unit.

Changing Diff Fluid Through a Michigan Winter
Cold mornings in Grand Rapids thicken gear oil, which is why most modern axles use a 75W grade. Salted roads wear on pinion and axle seals, so check for a damp, oily axle housing each spring. Deep standing water can also enter through the axle vent and turn the fluid milky.
- Loosen the fill plug first: if it is seized, you can stop before draining an axle you cannot refill.
- Drain warm, not hot: a short drive helps it drain, but let the housing cool enough to touch.
- Fill to the plug: most axles are full when oil starts to seep from the fill hole. A pump bottle or a fluid extractor for oil changes makes the job far easier under a car.
- Add modifier only if needed: follow the bottle and the manual on limited-slip friction modifier.

Used gear oil does not go in the trash or down a drain. The EPA lists gear oils among the used oils that should be recycled, and most parts stores accept it in a sealed container. Doing a full fluid round this season? Our guides to power steering fluid and fuel system cleaner picks cover two more items on the list.
Noises, Leaks and When to Bring It In
Even the best gear oil for differentials will not fix worn gears or bearings. A whine that rises with speed, a clunk when you shift into drive, or oil dripping from the axle cover points to a mechanical problem.

If you are due for an oil change in Creston, mention the sound when you book so we can take a look while the car is up. A factory scheduled maintenance visit also follows your maker’s service list, which on many vehicles includes axle fluid checks.
More Buying Guides
Frequently Asked Questions
What is the best gear oil for limited slip differentials?
Pick a GL-5 oil that lists limited-slip use and the grade your manual names. Mobil 1 Synthetic Gear Lube LS, Red Line 75W90 GL-5 and Triax Gear Premium LS all state limited-slip suitability on their listings. Some factory units still need a specific fluid or added modifier, so check the manual.
Is 75W-90 or 80W-90 better for a differential?
Neither is better in general. Use the grade your manual lists. A 75W-90 flows more easily on cold starts, which helps in a Michigan winter, while some older trucks were built around 80W-90.
How often should differential fluid be changed?
It varies widely by maker and use, so follow the schedule in your owner’s manual. Many manuals list a shorter interval for severe service, such as towing, plowing or frequent short trips in cold weather.
Can I put differential gear oil in a manual transmission?
Only if the manual and the bottle both allow it. Many manual gearboxes need a GL-4 fluid or a specific factory fluid, and a slippery GL-5 diff oil can cause shifting problems there.
Hearing a hum from the back axle or spotting oil on the driveway? Weekdays 8am to 5pm, call 616-279-3832, or book a visit on our contact page.
If your workday overlaps our hours, after-hours drop-off is an option, and you will find us at 456 Carrier St NE, Grand Rapids.
