As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Wrangler asks a lot of its cooling system: slow crawling with little airflow, bigger tires, towing and a grille packed tight with bugs and road grime. The best radiator for Jeep Wrangler owners is first of all the one built for their generation, because a TJ, JK and JL each use a different core and mounting.
Below we sort the generations, explain when an all-aluminum upgrade earns its place, then review six radiators from Mopar, TYC, Mishimoto, CSF and Spectra Premium. Confirm year, model, engine and transmission on each Amazon listing before you order, since no single radiator fits every Wrangler.
Quick answer
Which radiator fits my Jeep Wrangler?
Start with the generation. A 2007-2018 JK takes the 2957 pattern, sold as Mopar 68143886AA, TYC 2957 and Mishimoto’s JK radiators. A 2018-and-later JL needs a JL-specific core from Mishimoto or CSF, and a 1997-2006 TJ uses the CU2101 pattern. Choose stock-style for daily use, aluminum for towing.
Our Quick Picks
Three quick picks: Mopar's factory radiator for the JK, Mishimoto's all-aluminum JK upgrade and Mishimoto's aluminum core for the JL. All six radiators are reviewed below; confirm your year, engine and transmission before ordering.

Mopar 68143886AA
The Mopar-branded radiator under the JK factory part number.

Mishimoto MMRAD-WRA-07V2
Welded aluminum tanks and a larger core than stock.

Mishimoto JL Aluminum Radiator
A larger aluminum core for the JL's packed cooling stack.
Match the Radiator to Your Wrangler Generation
Jeep has changed the Wrangler’s front end with every generation, and the radiator changed with it. Ordering by model name alone is the most common way to end up with a core that will not line up with the mounts or hoses.
- TJ (1997-2006): four- and six-cylinder engines, including the 4.0L inline six. Replacement listings for this era use the CU2101 pattern, which also covers the earlier YJ.
- JK (2007-2018): the 3.8L V6 through 2011, then the 3.6L Pentastar. The common replacement number is 2957, and Mopar’s factory number is 68143886AA.
- JL (2018 on): a new platform with the 3.6L V6, the 2.0L turbo four and other engines depending on year. JL radiators are a different size and do not swap with the JK.
The 2018 model year is the trap, because Jeep sold the outgoing JK and the new JL side by side. Check your VIN or the build sheet if you are unsure which one you own, and read the part number on the old radiator before you pull it.
Stock-Style or All-Aluminum: Which Suits Your Jeep?
Factory Wrangler radiators pair an aluminum core with plastic end tanks crimped onto it. That design is light and inexpensive, and it is fine for most daily drivers. With age and thousands of heat cycles, though, the plastic can crack or the seam can start to seep.
All-aluminum radiators weld the tanks to the core instead. Mishimoto’s JK radiator page lists an 18 percent increase in core volume and 13 percent more coolant capacity than stock, with a 19 PSI cap in the box. That extra capacity makes sense for towing, larger tires, aftermarket bumpers that block airflow, or long low-speed trail days.
If your Jeep is mostly a commuter, a quality OE-style replacement does the job and keeps the stock look. If it already runs warm when working hard, an aluminum core gives you more margin. Either way, refill with the coolant type your owner’s manual specifies; our guide to coolant for Jeep models covers the options.
Best Radiator for Jeep Wrangler: Six Picks by Generation
The first three suit the JK, the next two the JL and the last one the TJ. Each review names the years its listing gives, but check the fit tool on Amazon against your exact engine and transmission before buying.
1. Mopar 68143886AA: Genuine Factory Radiator for the Jeep Wrangler JK

- Genuine Mopar part 68143886AA
- Factory number cross-referenced for 2007-2018 JK
- Stock core size and mounting points
- Single radiator, one per package
This is the radiator Mopar sells under part number 68143886AA, the factory number that aftermarket makers such as TYC cross-reference for the 2007 through 2018 Wrangler JK. The Amazon listing itself is brief and gives little beyond the part number and a quantity of one, so the number is the thing to match. Read the label on your old radiator or ask a dealer parts counter to confirm it against your VIN.
The appeal of a genuine part is fit rather than any extra cooling. The core size, hose necks, mounting tabs and transmission cooler connections follow the original design, so the fan shroud, condenser and lines should line up as they did when the Jeep was new. Like the stock unit, it pairs an aluminum core with plastic end tanks, which keeps it light and familiar to anyone who has worked on a JK.
It suits owners who keep a stock or lightly modified Jeep and simply want the original back after a leak or a cracked tank. It does not add capacity for towing, big tires or long trail days, and the plastic tanks will age the way the original did. It does not fit the JL or TJ, so confirm year, engine and transmission on Amazon before ordering.
View Mopar 68143886AA on Amazon
2. TYC 2957: OE-Style Replacement Radiator for 2007-2018 Jeep Wrangler

- Replaces 68143886AA, 55056634AB and CU2957
- Listed for the 2007-2018 Wrangler
- Aluminum tubes with louvered aluminum fins
- Inlet rings, tank ribs and double header plates
TYC’s 2957 is an aftermarket replacement for the stock JK radiator, and the listing names the 2007 through 2018 Wrangler. It replaces a long list of numbers, including Mopar 68143886AA and 55056634AB and the common CU2957 pattern, which makes it easy to cross-check against whatever is in your Jeep now.
TYC describes it as a direct OE replacement with drop-in fitment. The core uses aluminum tubes with folded and louvered aluminum fins, and the maker says the tube and fin pitch are comparable to the original, giving similar coolant flow. It also lists a few details aimed at the weak spots of stock-style radiators: aluminum inlet rings, internal ribs in the tanks, expansion grooves and double header plates meant to resist leaks at the seams.
This radiator suits owners who drive a mostly stock JK to work and back and need a sound replacement for a leaking or clogged original. It keeps the factory layout and plastic end tanks, so it is not built for extra capacity, and it will not suit an engine swap or a heavily worked rig. Check the year, engine and transmission listed on Amazon, and reuse or replace the hose clamps as the job requires.

3. Mishimoto MMRAD-WRA-07V2: All-Aluminum JK Radiator with Larger Core

- Direct fit for the Jeep Wrangler JK
- 18% more core volume, 13% more coolant capacity
- TIG-welded tanks and brazed aluminum core
- Magnetic drain plug and mounting hardware included
Mishimoto’s MMRAD-WRA-07V2 is the second version of its all-aluminum radiator for the Wrangler JK. The Amazon title says 2007 to 2017, while its feature list and Mishimoto’s own product page say 2007 to 2018, so check the fit tool for your exact year. The listing says it includes the hardware and instructions needed for installation.
The core is a 37-row stacked-plate design, and Mishimoto lists an 18 percent increase in core volume and 13 percent more coolant capacity than stock. The tanks are TIG-welded aircraft-grade aluminum on a fully brazed aluminum core, so there is no plastic seam to crack with age. The maker’s page adds a 19 PSI cap, and the box includes a magnetic drain plug that collects metal debris circulating in the coolant.
This one suits JKs that work harder than a commuter: towing a trailer, running larger tires, crawling on summer trails or wearing a bumper and winch that restrict airflow. Owners of stock Jeeps that only see pavement may not need the extra margin. As with any radiator swap, flush the old coolant, refill with the type your manual specifies and bleed the air out of the system before driving.
View Mishimoto MMRAD-WRA-07V2 on Amazon
4. Mishimoto Aluminum Radiator: Direct Fit for 2018 and Newer Wrangler JL

- Direct fit for 2018+ Jeep Wrangler JL
- 51% more core volume than stock
- 38% larger coolant capacity
- 37% more fin surface area
Mishimoto built this all-aluminum radiator for the Wrangler JL, and the listing calls it a direct fit for 2018 and newer models. It is not interchangeable with the JK version above, so make sure you know which body style you have, particularly on a 2018 Jeep when both were on sale.
The JL’s cooling stack is tightly packed, with the radiator, condenser and other coolers sharing limited space behind the grille. Mishimoto lists a 51 percent increase in core volume and 38 percent more coolant capacity than stock, plus 37 percent greater fin surface area for moving heat in that cramped space. The radiator carries Mishimoto’s lifetime warranty, according to the listing.
This radiator suits JL owners who tow, add heavy armor and larger tires, or spend long, slow days on trails in summer, all situations where the stock radiator’s margin gets used up. A JL used mainly for commuting rarely needs it. Because JL engine options vary by year, confirm year, model and engine on Amazon before buying, and check that any auxiliary coolers you have added still line up. Plan to bleed the cooling system carefully after installation, following the steps in your service manual.
View Mishimoto JL Aluminum Radiator on Amazon

5. CSF Wrangler JL and Gladiator JT: Aluminum Radiator with B-Tube Core

- Listed for Jeep Wrangler JL and Gladiator JT
- CSF 5mm fin and B-tube technology
- Up to 25% more efficient heat transfer, per CSF
- Works with factory or aftermarket coolers
CSF is a long-running radiator maker, and this listing covers its radiator for the Wrangler JL and the Gladiator JT, which share much of the same front structure. The listing does not print a model-year range in its title, so use Amazon’s fit checker and compare the part against your current radiator before ordering.
CSF builds the core with its 5mm fin and B-tube technology, which the maker says gives up to 25 percent more efficient heat transfer. The listing says it is designed to support higher boost, bigger turbos and additional load, which is relevant to the turbocharged engines offered in some JL trims and to Jeeps carrying heavy accessories. It is also designed to work with factory or aftermarket coolers and intercoolers, so a modified front end is less likely to need extra changes.
This one suits JL and Gladiator owners who have built their vehicles up and want a stout aluminum core as an alternative to the Mishimoto. It is more radiator than a stock commuter needs. Because engine options differ by year and the listing is light on fitment detail, confirm year, model and engine on Amazon, and keep the receipt in case the part does not match your Jeep.
View CSF Wrangler JL and Gladiator JT Radiator on Amazon
6. Spectra Premium CU2101: Complete Replacement Radiator for Wrangler TJ and YJ

- CU2101 pattern for 1997-2006 TJ and earlier YJ
- Built to meet or exceed OE performance
- No modifications required for fit
- Engine and transmission cooling components
Spectra Premium’s CU2101 is a complete replacement radiator for the older Wranglers. The Amazon title gives only the part number, but parts catalogs list CU2101 for the 1997 through 2006 TJ and the earlier YJ, and other sellers use the same number when they describe TJ radiators. That makes it a sensible pick for the 4.0L inline six and the four-cylinder TJs, as long as your listing check agrees.
Spectra says its radiators are engineered to meet or exceed the performance of the original equipment they replace, including the engine and transmission cooling sections. The listing also says no modifications are needed for proper fit. On an older Jeep, that matters, because the fan shroud, hoses and transmission lines are often original and do not tolerate much misalignment.
This radiator suits TJ owners keeping an older Wrangler on the road and replacing a corroded, clogged or leaking unit with something close to stock. It is not an upgrade for an engine swap or heavy towing. Radiators for these Jeeps can vary by engine and transmission, so confirm year, model, engine and transmission on Amazon before buying, and replace tired hoses and the cap at the same time.
View Spectra Premium CU2101 on Amazon
Wrangler Radiator Picks Side by Side
Find your generation in the first column, then decide between a stock-style and an all-aluminum unit.
| Generation | Radiators from this list | Construction | Suits |
|---|---|---|---|
| JK, 2007-2018 | Mopar 68143886AA, TYC 2957 | Aluminum core, plastic tanks | Daily drivers replacing a worn or leaking stock unit |
| JK, 2007-2018 | Mishimoto MMRAD-WRA-07V2 | All-aluminum, welded tanks | Towing, big tires, hot trail days |
| JL, 2018 on | Mishimoto JL aluminum, CSF JL/JT | All-aluminum | Owners wanting more cooling capacity than stock |
| TJ, 1997-2006 | Spectra Premium CU2101 | Stock-style replacement | Older Jeeps on routine repair |
If you have a Gladiator, a diesel or a modified engine, check every listing carefully, because the fit notes vary by engine. An engine swap usually calls for a radiator chosen around the new engine instead of the Jeep.

Before You Blame the Radiator
A Wrangler that runs hot does not always need a new radiator. Rule out the simpler parts first, because a new core will not fix any of these:
- Radiator cap: a weak cap lets coolant boil sooner and push out to the overflow bottle.
- Thermostat: one that sticks closed overheats the engine even with a healthy radiator.
- Fan and shroud: at trail speeds the fan does most of the work, so a slow fan or a cracked shroud shows up first off-road.
- Water pump: a weeping seal or worn impeller cuts flow. Our water pump brand guide covers replacements, and TJ owners can see the Jeep 4.0 water pump picks.

West Michigan adds its own wear. Winter road salt and spring mud pack into the fins between the condenser and radiator, so rinse that gap gently from the engine side after a muddy season. Old coolant also loses its protection over time, and a radiator flush before refilling helps a new core start clean.
Safety first: never open the cap on a hot engine, because pressurized coolant can scald. Let the Jeep cool fully, wear eye protection and gloves, and keep spilled coolant away from pets.
Overheating Signs That Need a Shop Look
Even the best radiator for Jeep Wrangler engines cannot help if a sensor or the engine itself is at fault. A temperature gauge that climbs while the warning light comes on, or an engine that stumbles when hot, points to more than a cooling part.

If the light is on but the Jeep seems fine, our article on a check engine light that stays on while the car runs fine explains the usual reasons. A sluggish pull from a stop is covered in why a car hesitates when accelerating. For a clear answer, our check engine light diagnostic in Grand Rapids reads codes and live data, including coolant temperature, before any parts get replaced.
More Buying Guides
Frequently Asked Questions
What is the best radiator for Jeep Wrangler JK models?
For a stock JK, an OE-style 2957 radiator such as Mopar 68143886AA or TYC 2957 is enough. If you tow or run larger tires, Mishimoto’s all-aluminum MMRAD-WRA-07V2 adds core volume and coolant capacity.
Will a JK radiator fit a JL Wrangler?
No. The JL arrived on a new platform with a different cooling stack, so it needs a radiator listed for the JL. This matters most on 2018 models, when both generations were sold.
Is an aluminum radiator worth it on a Wrangler?
It is worth it if your Jeep works hard: towing, bigger tires, slow trail driving or hot weather. For a stock daily driver, a quality OE-style radiator usually does the job.
How do I know if my Wrangler radiator is failing?
Look for coolant crusted on the end tank seams, a sweet smell after driving, a coolant level that keeps dropping, or a gauge that climbs at low speed. Pressure testing the system confirms where the leak is.
Is your Wrangler running warmer than it should? Ring Hendrick and the crew on 616-279-3832 any weekday from 8am to 5pm, or send us the details through our contact page.
Busy during shop hours? The after-hours drop-off at 456 Carrier St NE lets you leave the Jeep on your own schedule.
