As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A trailer parked in a driveway is easy to steal: back a truck up, drop the coupler on a ball and drive off. The best trailer hitch lock for you depends on what you are protecting, the trailer sitting on its jack or the ball mount sitting in your truck’s receiver.
Below are the two kinds of hitch locks, the fit checks to make and six locks worth a look.
Quick answer
Which trailer hitch lock should you buy?
Use two locks for two jobs. A locking receiver pin such as the Rhino USA pin keeps the ball mount in your truck. A coupler lock such as the TRIMAX UMAX100 stops anyone hooking up your parked trailer. For a 2-5/16 in coupler stored long term, a custom fit lock like the Proven 2516 covers more.
Our Quick Picks
Three quick picks: Rhino USA's locking receiver pin, the TRIMAX UMAX100 universal coupler lock and Proven's custom fit 2516. All six locks are reviewed below.

Rhino USA 2in Hitch Pin
Swaps the plain pin and clip for a keyed steel pin.

TRIMAX UMAX100
One lock that adjusts to most common couplers.

Proven Industries 2516
Made for one coupler family, so it covers more.
Receiver Lock or Coupler Lock? Two Different Jobs
“Hitch lock” covers products that protect different things, so sort out which one you need first.
- Receiver pin lock: a locking pin that replaces the plain pin and clip holding the ball mount, bike rack or cargo tray in the truck’s receiver tube. It protects the hitch gear.
- Coupler lock: a device that fills or covers the coupler on the trailer tongue, so no ball can fit under it. It protects a trailer that is parked and unhitched.
- Latch lock: a small padlock or pin through the coupler latch. It stops a quick unhook at a rest stop, not a parked trailer being hitched.
Many owners end up with a set: a receiver pin for the truck and a coupler lock for the trailer, ideally keyed alike so one key does both.
How to Pick a Hitch Lock That Fits
Fit matters more than any feature list. The best trailer hitch lock on paper is useless if it leaves a gap on your coupler.
- Pin diameter: most 2 in receivers on Class III and IV hitches use a 5/8 in pin; smaller 1-1/4 in receivers usually take 1/2 in. Measure the hole or check the hitch label.
- Pin span: the usable length between head and lock. Thick receiver walls, 2-1/2 in receivers and some newer pickups need a longer span.
- Coupler size and shape: 1-7/8, 2 and 2-5/16 in couplers differ, and lip shape (straight, rolled, underslung) decides whether a custom lock fits.
- Weather sealing: a keyhole cover or cap keeps salt slush and grit out of the lock.
A hitch lock does not change what your truck can tow. Towing capacity and tongue weight come from the vehicle maker, so check the owner’s manual and the placard on the hitch before you load a trailer.
Best Trailer Hitch Lock Options: Six Picks Reviewed
Two receiver pin locks come first, then universal coupler locks, a keyed alike kit and a custom fit lock. Confirm receiver size, pin diameter and coupler model on each Amazon listing before you buy.
1. Rhino USA 2in Hitch Pin: Locking Receiver Pin with Weatherproof Slide Cap

- Solid steel locking receiver pin
- Fits Class III and IV 2 in x 2 in receivers
- Patented slide cap covers the lock
- Lifetime replacement from the maker
The Rhino USA 2in Trailer Hitch Pin is a locking receiver pin, the part that replaces the plain pin and spring clip holding a ball mount or accessory in your truck’s receiver. The listing says it is made from solid steel and fits Class III and IV hitches with a 2 in x 2 in receiver opening.
Its main feature is a patented slide cap that closes over the lock end. Rhino USA describes it as a weatherproof cover meant to keep dirt, mud and debris out, which matters on a pin that sits behind the rear bumper through a salty winter. With the pin locked, the ball mount, cargo tray or bike rack cannot be pulled out, and a hitched trailer cannot be separated at the receiver.
This pin protects the hitch, not a parked trailer, so pair it with a coupler lock if the trailer sits unhitched at home. It is sized for 2 in receivers only; Rhino sells a separate 2.5 in version for Class V hitches. Check your receiver size and pin hole before you order.
View Rhino USA 2in Hitch Pin on Amazon
2. TRIMAX SXT5: Stainless Steel 5/8 in Receiver Lock with 3-1/2 in Span

- 100% stainless steel construction
- 5/8 in pin with extended 3-1/2 in span
- Patented quarter-turn locking mechanism
- O-ring seal and rubber keyhole cap
The TRIMAX SXT5 is a keyed receiver lock built entirely from stainless steel. It uses a 5/8 in pin with an extended 3-1/2 in span, and TRIMAX lists it for Class III, IV and V receiver openings, including the wider receivers on many newer Toyota, Ford and Chevy trucks. The longer span suits receivers too thick for a standard pin lock.
The lock uses TRIMAX’s patented quarter-turn mechanism, which the maker says is designed to prevent false locking, so the lock is either fully engaged or clearly not. An O-ring seal keeps water and grime out of the mechanism, and a rubber cap covers the keyhole. TRIMAX lists test figures above 32,000 lb and 5,800 lb of head pull strength for the dual lug design.
Stainless steel resists rust better than plain steel, which helps on a truck that sees road salt every winter. A 3-1/2 in span may sit loose in a narrow receiver, so measure the width across your receiver before you buy. Like any receiver lock, it guards the hitch and ball mount, not a trailer parked on its jack.

3. TRIMAX UMAX100: Universal Coupler Lock for 1-7/8 to 2-5/16 in Couplers

- Fits most standard couplers, 1-7/8 to 2-5/16 in
- Dual ratchet locking system
- 360-degree coverage, high-strength body
- Sealed keyhole cover
The TRIMAX UMAX100 is a universal coupler lock, meant to stop anyone from hooking up your trailer while it is parked. The listing says it fits most standard trailer couplers from 1-7/8 in to 2-5/16 in, so one lock can move between a small utility trailer and a larger boat or camper trailer without buying a lock for each size.
It clamps onto the coupler with a dual ratchet locking system, which TRIMAX says gives a strong, tamper-resistant fit. The body wraps around the coupler for 360-degree coverage and is described as resistant to cutting, drilling and forced entry. A sealed keyhole cover keeps dirt, dust and moisture out, so the lock is easier to open after weeks outside.
A universal design trades some coverage for flexibility. On some coupler shapes it leaves more of the tongue exposed than a lock made for one coupler model, and it does nothing while you are towing. It suits owners with mixed trailers or anyone who wants a single, adjustable lock. Confirm your coupler size before ordering and check the fit on the trailer once it arrives.
4. Master Lock 379ATPY: Universal Keyed Coupler Lock in Rust-Resistant Zinc

- Fits 1-7/8, 2 and most 2-5/16 in couplers
- Pick and pry resistant design
- Rust-resistant zinc construction
- Installs without tools; two keys included
The Master Lock 379ATPY is a universal trailer coupler lock with a simple keyed design. The listing says it fits 1-7/8 in, 2 in and most 2-5/16 in couplers, covering the common ball sizes on utility, boat and camper trailers. It goes on without tools, and the lock blocks the coupler so a ball cannot fit underneath while the trailer is parked.
Master Lock describes the lock as pick and pry resistant, and the body is made from zinc, which the listing says resists rust and seizing through outdoor storage and changing weather. That suits a trailer left in a driveway or yard through a West Michigan winter. The package includes one coupler lock and two keys.
This is a straightforward lock rather than a heavy shrouded design, so it suits low to moderate risk situations: a landscaping trailer behind a fence, a boat trailer between trips or a camper at a campsite. It does not protect the receiver or ball mount on the truck. If your trailer has an unusual coupler shape, check the fit on the listing first, since most but not all 2-5/16 in couplers are covered.
View Master Lock 379ATPY on Amazon

5. Rhino USA Coupler Lock Kit: 2-5/16 in Steel Lock with Keyed Alike Latch Pin

- Fits 2-5/16 in A-frame, 50×50 and 50×60 couplers
- Powder-coated solid steel build
- Coupler lock and latch lock keyed alike
- Lifetime replacement from the maker
The Rhino USA Trailer Coupler Lock Kit pairs a coupler lock with a latch pin lock, both opened by the same key. The listing names exact fitment: 2-5/16 in A-frame, 50×50 and 50×60 couplers, with a maximum lip width of 4-3/8 in and lip height of 5/16 in. Rhino USA says it does not fit rolled-lip or underslung couplers, so check your coupler type before you order.
The coupler lock is made from reinforced solid steel with a powder-coated finish that the maker says shields against rust and corrosion. The latch lock fits standard tongue latches. Used together, the coupler lock protects the trailer while it is parked and the latch lock keeps the coupler closed during stops on a trip. Two matching keys are included.
This kit suits boat trailers, campers and toy haulers stored at home or on a job site, and owners who want one key for the tongue. It is sized for 2-5/16 in couplers only; Rhino lists a separate 2 in kit. It protects the trailer, not the truck’s hitch, so add a receiver pin lock if you leave a ball mount in place.
View Rhino USA Coupler Lock Kit on Amazon
6. Proven Industries 2516: Custom Fit Coupler Lock for Select 2-5/16 in Couplers

- Custom fit for select 2-5/16 in couplers
- Hardened steel locking parts
- Pick-resistant key with interior lock
- Made in the USA
The Proven Industries Model 2516 is a heavy-duty coupler lock made to fit specific 2-5/16 in trailer couplers rather than every size. Shaped around one coupler family, it covers more of the coupler and leaves less room for a tool. Proven says the lock will only mount on certain couplers, so check its compatibility list against your coupler maker and model before buying.
The listing says the locking parts are hardened steel and the outer cover is built to resist power tools, hammers and crowbars. Proven uses its own key design, which it says is meant to prevent picking, with an interior locking mechanism that makes the key hard to copy. The lock is made in the USA.
This lock suits trailers that sit for long stretches, such as a camper stored for the winter, an equipment trailer on a job site or a boat trailer parked at a seasonal spot. It is the most limited option here for fit, and it does not suit owners who swap one lock between trailers. Like any lock, it slows a thief down rather than making theft impossible.
View Proven Industries 2516 on Amazon
Hitch Lock Types Compared
Match the lock type to what you want to protect. Tow often and store at home? You will likely want one from each of the first two rows.
| Lock type | What it protects | Fit check | Suits |
|---|---|---|---|
| Receiver pin lock | Ball mount, bike rack or tray in the receiver | Pin diameter and span | Anyone who leaves a ball mount in the truck |
| Universal coupler lock | A parked, unhitched trailer | Coupler size range | Several trailers or mixed coupler sizes |
| Custom fit coupler lock | A parked trailer, with more of the coupler covered | Exact coupler make and model | Long-term storage at home or a job site |
| Latch lock | The coupler latch while towing | Latch hole size | Rest stops and fuel stops on a trip |
A utility trailer behind a locked gate may be fine with a universal coupler lock, while a boat or dump trailer parked near the road is a bigger target. Pick the best trailer hitch lock for the coupler you own, not the one in the photo.

Hitch gear is one part of a towing setup. Before a long trip, set up your tow mirrors to see down both sides of the trailer, and make sure the receiver pin lock still turns freely.
Salt, Stuck Pins and Storing a Trailer in West Michigan
A receiver pin sits behind the bumper, right where Grand Rapids slush and road salt land all winter. A pin that is never pulled can rust into the receiver. Pull, clean and lightly grease it now and then, and keep the keyhole cover closed.
If a pin head or lock is already stuck, TRIMAX’s receiver lock FAQ suggests soaking the gap between the head and the shaft and the lock itself with penetrating oil, waiting, then tapping the head with a wooden hammer handle and repeating. Add the hitch pin to your winter car maintenance checklist so it gets looked at with everything else.

Trailers parked for the winter can sit unchecked for weeks. Park the tongue toward a wall or fence, chock the wheels and keep the coupler locked. If the truck stays parked too, a weak battery can leave you stuck on the first cold morning; our guide to a car not starting in cold weather covers the usual causes, and a winter car emergency kit belongs in the cab for any towing trip.
When the Truck Needs a Mechanic, Not a Lock
The truck still has to stop and steer with a trailer behind it. If the brakes feel soft or pull when you tow, have them inspected; our brake repair in Grand Rapids covers pads, rotors, calipers and lines.

A rear end that sags hard or a truck that wanders while towing can point to worn shocks, springs or steering parts. Our suspension repair in Grand Rapids checks those parts. Stay within the tongue weight and towing limits in your owner’s manual and on the hitch placard.
More Buying Guides
Frequently Asked Questions
What is the best trailer hitch lock for a parked trailer?
A coupler lock, because it blocks the coupler so no ball can fit under it. A universal lock fits several coupler sizes, while a custom fit lock made for your exact coupler covers more of it and leaves less room for prying.
Do I need a receiver lock and a coupler lock?
If you leave a ball mount in the truck and store a trailer at home, yes. The receiver lock protects the hitch gear and the coupler lock protects the parked trailer. A keyed alike set lets one key open both.
What size hitch pin lock do I need?
Most 2 in Class III and IV receivers use a 5/8 in pin, and smaller receivers often use 1/2 in. Check the span too, since thick receiver walls and larger receivers need a longer pin. The hitch label or manual lists the size.
Can a trailer hitch lock be cut or picked?
Any lock can be defeated with enough time and tools. A good hitch lock makes theft slower, louder and more visible, so a thief is more likely to move on. Parking habits, wheel chocks and lighting all help.
Getting the truck ready to pull a camper or boat this season? Have Hendrick and the team look over the brakes and suspension first: call 616-279-3832 Monday to Friday, 8am to 5pm, or book a visit through our contact page.
Leave the trailer locked at home and bring just the truck to 456 Carrier St NE in Creston. If your workday runs late, the after-hours drop-off means you can leave it with us on the way home.
