As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Plug a generic code reader into an Audi and it talks to the engine and emissions side only. The best OBD2 scanner for Audi work reaches the rest of the car too: ABS, airbags, the electric parking brake, the battery manager and the comfort modules. That is where most Audi service jobs live.
If you are new to scan tools in general, our buying guide to the best OBD2 scanner for DIY mechanics explains code readers, live data and two-way testing. Below are Audi jobs, app against handheld, and six VAG tools.
Quick answer
Which OBD2 scanner should you buy for an Audi?
Choose a tool built for VW Group cars that scans every module and lists EPB service, battery registration and service resets. The iCarsoft VAWS V4.0 adds coding and bidirectional tests, the KINGBOLEN SOLOSCAN runs on your phone with no subscription, and the KONNWEI KW450 covers the basics on a budget. Check the maker’s coverage for your model and year.
Our Quick Picks
Three tools that cover the main ways Audi owners work: a full-featured handheld, a phone app with no subscription and a simple budget reader.

iCarsoft VAWS V4.0
Deep VAG handheld with service functions, actuation tests and ECU coding built in.

KINGBOLEN SOLOSCAN
Phone-based VAG scanner with service resets and active tests and no yearly fee.

KONNWEI KW450
Entry-level VAG handheld that still lists battery registration and EPB reset.
What an Audi Needs From a Scan Tool
A tool worth buying for an Audi should handle these jobs:
- All-module scan: reads fault codes from the ABS, airbag, transmission, parking brake, gateway and comfort modules.
- EPB service mode: on an Audi with an electric parking brake, the tool opens the rear caliper motors before new pads go in, then closes them again.
- Battery registration: most newer Audis track the battery, so a replacement has to be registered or coded in.
- Service reset: clears the oil or inspection reminder after the work is done.
- Adaptations: relearns for the throttle body and steering angle sensor after a repair.
Ross-Tech, the maker of the VCDS software for VW and Audi Group cars, publishes a tech tip on working on the electro-mechanical parking brake. It lists the A3, Q3, A4, A5, Q5, A6, A7 and A8 among the cars that use it. Its battery replacement page says a large majority of modern VW and Audi vehicles need a new battery configured.
Once you have codes in hand, our list of common Audi fault codes explains what the usual ones mean, and our Audi EPC light guide covers a related warning.
Bluetooth App or Handheld for an Audi?
A Bluetooth tool is a small plug that runs through an app on your phone. It is easy to leave in the glovebox. The trade-offs are a phone that has to stay connected and, on some brands, paid plans or credits.
A handheld has its own screen and works without a phone. Listings for the handhelds below describe their service functions as included, with free software updates. The cheaper ones have small screens.
If you want OBDeleven or Carista, the app tools most Audi forums talk about, our guide to the best scan tool for VW owners reviews both. Both work on Audis; this page covers different products.
Best OBD2 Scanner for Audi: The Picks in Detail
Every tool below names Audi or VAG functions in its Amazon listing. Coverage varies by model and year, so check with the maker or seller before you buy.
1. iCarsoft VAWS V4.0: VAG Full System Bidirectional Scanner with ECU Coding

- Full-system diagnosis for Audi and other VAG brands
- Bidirectional tests and ECU coding for 2010+ models
- Up to 43 services, including EPB, BMS and SAS
- 5-inch touchscreen, CAN FD, lifetime free updates
The iCarsoft VAWS V4.0 is a handheld scan tool built for VAG cars, listed for Audi, VW, Skoda, SEAT, Bentley and Lamborghini. The listing calls it an upgrade from the VAWS V3.0, with CAN FD support, a 5-inch touchscreen, a 5000mAh battery and a faster processor. It runs a full-system diagnosis, reads and clears codes in every module it can reach and graphs live data, and it works without a phone or app.
Its service menu lists up to 43 functions for VAG cars. Among them are oil reset, EPB, battery management, steering angle calibration, throttle adaptation, DPF, ABS bleeding, injector coding, TPMS and headlamp services. Bidirectional control lets you command parts such as the fuel pump, cooling fan, injectors, windows and door locks to check that they respond. A separate Coding menu covers vehicle configuration, module replacement and hidden features on major VAG models from 2010 on.
The listing says updates are free for life, and you can add two more vehicle brands, which can’t be changed once downloaded. It also warns that not every model supports every service, and asks buyers to send their VIN to check. It suits an Audi owner who wants coding and tests on one screen. For quick code checks alone it is more tool than you need.
View iCarsoft VAWS V4.0 on Amazon
2. KINGBOLEN SOLOSCAN: Bluetooth VAG Scanner with Bidirectional Tests and No Subscription

- Bluetooth adapter for iOS and Android
- Full-system diagnosis for Audi, VW, Skoda and SEAT
- Oil, EPB, SAS, ABS bleeding and battery calibration
- One-time payment with lifetime WiFi updates
The KINGBOLEN SOLOSCAN is a Bluetooth adapter that plugs into the OBD2 port and runs through an app on an iPhone or Android phone. Its listing describes it as optimized for VW Group cars, naming VW, Audi, Skoda, SEAT, Bentley, Bugatti and Lamborghini. It runs a full-system scan covering the engine, automatic transmission, ABS, airbags, chassis and battery systems, with live data, freeze frame and Auto VIN.
The service list covers the common Audi jobs: oil service reset, EPB reset, steering angle calibration, ABS bleeding, injector matching, TPMS relearn, battery calibration and adaptive headlight calibration. It also lists bidirectional active tests for switches, fuel system circuits, the cooling fan and other actuators. The listing stresses a one-time payment, with no subscription or annual fee and lifetime WiFi software updates.
Because it works through your phone, it is small enough to keep in the car, and the phone screen is larger than most budget handhelds. The listing directs support questions to the seller, so keep your order details. Coverage varies by model and year, so confirm your Audi before buying. If you would rather not depend on a phone and an app, a handheld is the simpler choice.
View KINGBOLEN SOLOSCAN on Amazon

3. ANCEL VD700: VAG All System Scanner with Adaptations and Battery Registration

- All-system diagnosis on VAG vehicles
- Basic settings, adaptation and access authorization
- Brake pad, oil, steering angle and battery registration
- Includes an ANCEL EVA storage case
The ANCEL VD700 is a handheld scanner that the listing calls an upgraded version of the ANCEL VD500. On VAG vehicles it runs an all-system diagnosis covering ABS, transmission, steering angle, airbags, stability control, TPMS and other systems, and it reads live data and VIN information. On non-VAG cars built for the US from 1996 on, it reads the engine system only, so treat it as an Audi and VW tool first.
Its special functions are listed as basic settings, adaptation and access authorization where needed. The examples given are throttle position adaption, brake pad reset, TPMS reset, steering angle learning, oil service reset, injector learning, battery registration and DPF reset. Those cover most routine Audi jobs, from a service reminder to rear pads and a new battery. This bundle adds an ANCEL EVA hard case to keep the tool and cable together.
The listing doesn’t name bidirectional component tests or ECU coding, so look elsewhere if you want to switch on hidden features or command parts. It suits an owner who wants a plain handheld for service jobs and code checks on an A4, Q5 or similar. Functions vary by model and year, so confirm coverage for your Audi with ANCEL before you buy.
4. ANCEL BD500: Bluetooth 5.0 VAG Code Reader with EPB and Service Reset

- Bluetooth 5.0 for iPhone, iPad and Android
- Reads all control modules on VW, Audi, Skoda and SEAT
- EPB reset, service reset and throttle learning
- Supports KWP, TP20 and UDS protocols
The ANCEL BD500 is a Bluetooth 5.0 code reader that pairs with an iPhone, iPad or Android device. Its listing says it is designed for Volkswagen, Audi, Skoda and SEAT diagnostics, and that it reads and clears codes in the main systems such as engine, transmission, airbags, TPMS, ABS, steering angle and stability control. It also lists support for body, chassis, powertrain and all control modules, using the KWP, TP20 and UDS protocols.
The listing title names EPB reset, service reset and throttle learning, which covers rear pads, the oil reminder and a throttle relearn after cleaning. It adds a brake performance test with trip analysis and a graph of starting voltage over time. That voltage graph is a handy check on a tired battery before a Michigan winter. On non-VAG cars it reads the engine and emissions side only.
Compared with the other tools here, the service list is short. The listing doesn’t name battery registration, coding or bidirectional tests, so plan on a fuller tool if you need those. The kit includes a storage bag. It suits an owner who wants a small reader to leave in the car and pull out when a light comes on.

5. KONNWEI KW450: VAG Full System Scanner with Battery Registration and EPB Reset

- Full-system scan on VW, Audi, Skoda and SEAT
- Oil, EPB, SAS, DPF and throttle match
- Battery registration and BMS reset
- 2.8-inch color screen, updates through a Windows PC
The KONNWEI KW450 is an entry-level handheld for the VAG series, listed for VW, Audi, Skoda and SEAT. It runs a full-system scan on key systems including the engine, transmission, ABS, steering angle, airbags, stability control, immobilizer and battery, then reads and clears the fault codes. It also covers the standard OBD2 functions, including live data, freeze frame, I/M readiness, VIN retrieval and the EVAP test.
For a budget tool, the service list is long. It names oil reset, battery registration, BMS reset, throttle reset and throttle match, ABS, DPF, EPB, steering angle reset, injector coding, lamp adjust and suspension adjustment. That covers a service reminder, rear pads, a new battery and a throttle relearn on many Audis. The listing mentions VCDS, but this is KONNWEI’s own tool, not Ross-Tech’s software.
The 2.8-inch color screen is small, and software updates run through a Windows 7 to 11 computer rather than WiFi. The listing says updates and printing are free for life, but it doesn’t list coding or bidirectional tests. It suits an owner who mainly wants to reset reminders and do rear brakes or a battery at home. Confirm that it covers your model and year before buying.
6. AUTOPHIX 7610P+: VW and Audi Full System Code Reader with Storage Case

- Built for VW, Audi, Skoda and SEAT
- Full scan of every system it can reach
- Engine, transmission, ABS and airbag diagnostics
- Includes an AUTOPHIX EVA protective case
The AUTOPHIX 7610P+ is a handheld scan tool that the listing says is built specifically for VW, Audi, Skoda and SEAT owners. Its job is diagnosis: a full, in-depth scan of every system in the car, with diagnostics on the engine, transmission, ABS, airbags and other systems. You read the codes, make the repair and then clear them. This bundle adds an AUTOPHIX EVA storage case made of Oxford cloth and EVA rubber.
Unlike the other tools here, this listing doesn’t name any service functions. There is no mention of EPB service mode, battery registration, service reminder reset or adaptations, so don’t count on it for those jobs. What it offers is a plain way to see which Audi module logged a fault, which is often the first question when a warning light comes on. The seller invites buyers to send the make, year and problem for compatibility guidance.
It suits an owner who mainly wants to know why a light is on before deciding whether to fix it at home or book a shop. If you plan to do rear brakes or replace a battery yourself, pick a tool that lists those functions. Check coverage for your model and year before you buy.
View AUTOPHIX 7610P+ on Amazon
Matching the Tool to the Audi Job
The best OBD2 scanner for Audi ownership is the one whose listing names the jobs you plan to do. Confirm each function for your model and year with the maker or seller.
| Audi job | Tools that list it | Watch for |
|---|---|---|
| Rear pads with an electric parking brake | iCarsoft VAWS V4.0, KINGBOLEN, ANCEL VD700, ANCEL BD500, KONNWEI KW450 | Keep a charger on the battery during the job |
| New battery registration | iCarsoft VAWS V4.0, ANCEL VD700, KONNWEI KW450, KINGBOLEN (battery calibration) | Vehicle dependent; enter the new battery’s details |
| Oil or inspection reminder reset | iCarsoft, KINGBOLEN, ANCEL VD700, ANCEL BD500, KONNWEI | Do the service first |
| Coding and hidden features | iCarsoft VAWS V4.0 (2010 and newer) | Write down the original coding before changing it |
| Bidirectional component tests | iCarsoft VAWS V4.0, KINGBOLEN | Run tests with the car parked and secure |
| Reading and clearing codes only | All six, including the AUTOPHIX 7610P+ | Fix the fault before you clear it |

Scanning an Audi Through a Michigan Winter
Grand Rapids winters are hard on batteries, and a weak battery in an Audi can leave low-voltage faults in modules that have nothing wrong with them. After a cold snap, charge or test the battery, then clear the codes and scan again. Our Audi battery replacement guide explains why the registration step matters when the battery is replaced.
Ross-Tech’s EPB tech tip warns that the parking brake module is very sensitive to low voltage and says to keep a battery charger connected for the whole rear brake job. Road salt also builds up on rear calipers here, so check the slides while the brake is in service mode.

When to Bring Your Audi In
A scan tool shows where a fault was logged, not always why it happened. Our guide to why the check engine light comes on when the car runs fine walks through the usual causes when an Audi feels normal.
Never clear airbag or ABS codes without fixing the cause, or drive with the parking brake still in service mode. If a pad warning brought you here, our guide to the Audi brake pad warning light covers what it usually means.

When the code points to wiring, sensors or a module, our check engine light diagnostic in Grand Rapids traces it with proper testing, and Hendrick is Audi factory trained. Our Audi repair service in Grand Rapids handles the repair.
More Buying Guides
Frequently Asked Questions
Do I need a scan tool to change rear brake pads on an Audi?
On an Audi with an electric parking brake, yes. The tool puts the parking brake into service mode so the caliper motors open. Once the pads are fitted, run the caliper motors back in with the tool before driving.
Will a generic OBD2 scanner work on an Audi?
It will read engine and emissions codes, since every Audi sold in the US since 1996 has an OBD2 port. It usually can’t reach the ABS, airbag, parking brake or battery modules, so it can’t do Audi service jobs.
Do I have to register a new battery on my Audi?
On most newer Audis, yes. The car tracks the battery and adjusts charging to it, so a replacement should be registered with a tool that lists battery registration for your model.
What is the best OBD2 scanner for Audi owners who want coding?
Of the tools here, only the iCarsoft VAWS V4.0 lists ECU coding, for major VAG models from 2010 on. App tools such as OBDeleven also code, but some functions need a paid plan or credits.
Warning lights your scan tool can’t explain on your Audi? Call 456 AutoFix in Grand Rapids at 616-279-3832, Monday to Friday 8am to 5pm, or book an Audi diagnostic check through our contact page.
Can’t make it during the day? Use our after-hours drop-off. We’re at 456 Carrier St NE in Creston.
