As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Open the hood of most BMWs and you will not find a metal can hanging under the engine. You will find a plastic cap on top of a housing, and under it a paper element with a couple of rubber rings. The best oil filter for BMW engines is simply the right element for your engine, from a maker that builds to the original spec, fitted with fresh seals.
This guide explains how BMW cartridge filters work, how to match one to your car, and then reviews six elements. If you drive something other than a BMW, our look at the best oil filter brand for spin-on filters covers the American-style cans.
Quick answer
Which oil filter should a BMW owner buy?
Buy the cartridge that matches the part number on your current element, from an original-equipment maker such as MANN, MAHLE, Hengst or Bosch, or genuine BMW. The MANN HU 816 x suits many older six-cylinder models, the MANN HU 6022 z covers newer 540i and X models, and BMW’s own element covers the rest.
Our Quick Picks
Three quick picks: one for older six-cylinder models, one for newer 5, 7 and X Series cars, and the factory part. All six filters are reviewed below.

MANN HU 816 x
A long-running MANN element whose listing names 1 Series models from 2006 on.

MANN HU 6022 z
MANN's element for recent 5, 7, 8 and X Series cars.

Genuine BMW 11427953125
The dealer part, for owners who want the original number.
Why BMW Uses Cartridge Filters
A cartridge filter, also called an insert or element, is just the pleated media and its end caps. The housing stays on the engine and the cap screws off from above, so you swap only the part that actually traps dirt. Hengst, one of the German suppliers in this list, describes its oil filter inserts this way: only the insert needs replacing, which cuts down the waste left after each service.
There is a practical side too. MANN and MAHLE describe several of their BMW elements as metal-free, so there is no steel shell to drain and crush. Check your local rules on how to dispose of the old element along with the used oil.
Matching the Element to Your BMW Engine
BMW has used many engine families over the years, from the older inline sixes in an E46 or E90 to the N20, N52, N54 and N55, and the newer B46, B48 and B58. Each family has its own housing, and the element changes with it. Model names alone can mislead, since a 328i has had both six- and four-cylinder engines. Two elements can look alike and still differ in height or seal size.
- Read the old element: the part number is usually printed on the end cap or the media.
- Use the fit checker: enter year, model and engine on Amazon before ordering.
- Cross-reference: MANN, MAHLE, Hengst and Bosch listings often print the BMW number they replace.
- Check the seals: make sure the cap O-ring is in the box, plus a drain plug washer if your car needs one.
The filter only works as well as the oil it cleans. Our guide to the best oil for BMW engines and Longlife approvals explains those labels.
Best Oil Filter for BMW: Six Cartridges Reviewed
Every fitment note below comes from the Amazon listing or the maker. No single element fits every BMW, so confirm your year, model and engine with Amazon’s fit checker or the maker’s catalog before you buy.
1. MANN-FILTER HU 816 x: Cartridge Oil Filter with Drain Plug Gasket for BMW

- Cartridge element for BMW housings
- Drain plug gasket included
- Listing names 125i to 135is
- Metal-free design
The MANN-FILTER HU 816 x is a cartridge element made for the plastic-capped housings found on many BMW engines of the last two decades. Its Amazon listing names the 125i (2009-2010), 128i (2008-2013), 130i (2006-2010), 135i (2008-2013) and 135is (2013), and the same element turns up in fit lists for other models that share those engines. That makes it one of the most widely stocked BMW filters, so it is easy to find again at the next change.
MANN describes the HU 816 x as metal-free, with pleated media held between molded end caps. This listing also bundles an oil drain plug gasket, which saves a separate purchase and means the two seals you replace at every change come together. Check the box for the cap O-ring as well, and compare it with the one on your car before fitting.
The element suits an owner who wants a straightforward, original-equipment style filter for an older inline six and plans to buy it again and again. Newer and four-cylinder BMW engines generally use different elements, so this is not a one-size part. Match the part number on your old filter, or confirm year, model and engine with Amazon’s fit checker, before you order.
2. BOSCH 72241WS Workshop: Cartridge Oil Filter with OE Seals for BMW

- Screens up to 97.5% of harmful particles
- Holds up to 13 grams of contaminants
- Seals included where OE specifies
- Long BMW fit list on the listing
The BOSCH 72241WS belongs to the Workshop range, the line Bosch aims at professional service bays. It is a cartridge element, and its listing carries one of the longest BMW fit lists here, including the 2007-2013 328i, 2007-2015 335i, 2007-2017 X3, 2007-2018 X5, 2008-2019 X6, 2006-2016 Z4, 2015-2020 M4 and 2016-2021 M2, among many others. That breadth helps if you look after more than one BMW in the family.
Bosch says the filter screens up to 97.5% of harmful particles such as dirt and carbon deposits, and can capture and hold up to 13 grams of them. It is designed to fit exactly like the original element, and the O-rings, seals or washers needed for the job come in the box where the vehicle maker specifies them. That last point matters on a BMW, where a reused cap seal is a common source of leaks.
This is a sensible pick for a home mechanic who wants a known brand with the seals included and a clear fit list to check against. Even with that long list, fitment can change within a model year, so confirm your engine with the fit checker above the listing before you order, as Bosch itself advises.

3. MANN-FILTER HU 6022 z: Cartridge Oil Filter with Drain Plug Gasket for Newer BMW Models

- Cartridge element for newer BMW engines
- Drain plug gasket included
- Permanently flexible O-rings
- Media stable under extreme conditions
The MANN-FILTER HU 6022 z covers a newer generation of BMW engines than the HU 816 x. Its listing names the 540i, 540i xDrive, 740i, 740i xDrive, 745e xDrive, 840 Series, M Series, X Series and Z4, which points to the bigger, more recent cars in the range. If you drive one of those and your old element is a different shape from the classic six-cylinder filter, this is the MANN part to compare against.
MANN says its cartridge end caps keep an effective seal for the whole service life of the filter, and that its O-rings stay permanently flexible. The media is built to remain stable and working under extreme conditions, such as cold starts and high oil temperatures on a hard drive. Like the HU 816 x, this listing includes an oil drain plug gasket, so both service seals come in one order.
It suits owners of recent BMWs who want an original-equipment style element with the drain plug washer included. The broad listing names do not mean it fits every version of those models, since engines and housings vary within a series. Check the number on your current filter, or confirm year, model and engine with Amazon’s fit checker, before buying.
4. Hengst E61H D215: Oil Filter Insert for BMW 1 to 7 Series and X Models

- Cartridge insert from a German OE supplier
- Pressure and heat resistant build
- Precisely welded filter core
- Listing names 1 to 7 Series, X1 to X6, Z4
Hengst is a German filtration company, and the E61H D215 is one of its BMW inserts. The Amazon listing names the 1, 2, 3, 4, 5, 6 and 7 Series along with the X1, X3, X4, X5, X6 and Z4, in coupe, convertible, Touring, Gran Turismo and Gran Coupe body styles. Those names are broad, so treat them as a starting point rather than proof of fit.
The listing describes a filter that holds up to pressure and heat across operating conditions, with precise welding of the filter core and an accurate fit for easy installation. On its own site, Hengst says its inserts offer high dirt absorption, pressure and temperature resistance and resistance to pulsation, and that only the insert is replaced at service, which reduces what goes to disposal.
This element suits an owner who already trusts Hengst or wants an alternative to MANN and MAHLE with the same original-equipment approach. The listing text does not spell out which seals are in the box, so check the photos and have a cap O-ring on hand. Above all, compare the E61H D215 number with your old filter, or confirm your year, model and engine with the fit checker, because BMW uses several different elements.
View Hengst E61H D215 on Amazon

5. MAHLE Original OX 404D ECO: Metal-Free Oil Filter Element, Replaces BMW 11 42 8 507 683

- Replaces BMW 11 42 8 507 683
- Metal-free ECO element
- Stable pleats for cold starts
- Embossed media resists clogging
The MAHLE Original OX 404D ECO is listed as a replacement for BMW part number 11 42 8 507 683, and it cross-references to MANN’s HU 6004 x. MANN’s own Amazon listing for the HU 6004 x names the 328d (2014-2018), 328d xDrive (2014-2017) and 535d (2014-2016), so this is the element to look at if your BMW uses that part number. Check the number on your old filter first, since most other BMW engines use different elements.
MAHLE builds the OX ECO range to original-equipment design and materials. The cartridge is metal-free and can be completely incinerated, and its pleats are shaped to stay stable during cold starts. Small embossed bumps keep the pleats from collapsing together, which MAHLE says prevents clogging and loss of filtration as the element ages, and a pressure relief valve keeps oil flowing at all times.
This filter suits owners whose BMW calls for the 11 42 8 507 683 element and who want a well-known supplier as an alternative to the dealer part. It is not a general BMW filter, so it will not suit most gasoline models. The listing text does not say which seals come with it, so check the photos, and confirm year, model and engine with the fit checker before you buy.
6. Genuine BMW 11427953125: Oil Filter Element Set, Factory Part

- Genuine BMW part
- Sold as a filter element set
- Made to BMW filtration specs
- Meets BMW pressure and durability specs
This is a genuine BMW oil filter element set, part number 11427953125, sold through Amazon. BMW says its oil filters are made from high-quality materials and are guaranteed to meet all of its specifications for filtration, pressure and durability. For owners who prefer the original part, or who want to keep service records matched to BMW numbers, it removes any doubt about whether an aftermarket element is the same as the factory one.
The listing gives the part number rather than a list of cars, so the practical step is to compare that number with the one on your current filter, your service records or BMW’s parts catalog. BMW calls it a set, which usually means the element comes with its seals, but the listing does not say so outright, so look at the photos or have a cap O-ring ready.
It suits owners who want dealer-grade parts without a dealer visit, and anyone matching a part number from an earlier invoice. It will not suit engines that call for a different element, so confirm year, model and engine with Amazon’s fit checker before you order.
View Genuine BMW 11427953125 on Amazon
Which Cartridge Goes With Which BMW
Use this as a starting point, then confirm the part number. The models shown are the ones each listing names, not a complete fit list.
| Filter | Listing names | Seals noted |
|---|---|---|
| MANN HU 816 x | 125i, 128i, 130i, 135i, 135is | Drain plug gasket |
| Bosch 72241WS | 328i, 335i, X3, X5, X6, Z4, M2, M4 and more | O-rings where OE specifies |
| MANN HU 6022 z | 540i, 740i, 745e, 840 Series, X Series, Z4 | Drain plug gasket |
| Hengst E61H D215 | 1 to 7 Series, X1 to X6, Z4 | Check listing |
| MAHLE OX 404D | Replaces BMW 11 42 8 507 683 | Check listing |
| Genuine BMW 11427953125 | Part number only | Check listing |
When two filters list the same car, either one is fine as long as the part number matches. Picking the best oil filter for BMW owners then comes down to brand preference and whether the seals you need come in the box.

O-Rings, the Drain Plug and the Filter Cap
Most oil leaks after a DIY change on a BMW come from the seals, not the filter. The large O-ring on the cap should be replaced every time. Pull the old one off, lightly oil the new one and seat it fully in its groove, so it does not roll or pinch when you tighten the cap.
The drain plug usually seals with a crush washer, and a fresh one is cheap insurance. Tighten the plug and the plastic cap to the torque in your service information, because an overtightened cap can crack. A cap socket that fits your housing beats pliers, and if you drain from the top, an oil change fluid extractor saves crawling underneath.

Winter Driving, Short Trips and Change Intervals
BMW’s service indicator sets the oil interval for most newer cars, but it assumes typical use. In West Michigan, cold starts and short winter trips keep the engine from fully warming up, so moisture and fuel can collect in the oil. Our article on how often to change oil explains when to shorten the gap.
Thin, approved oil helps on frozen mornings, and our list of the best motor oil for cold weather goes deeper. A fresh filter matters just as much, since even the best oil filter for BMW engines can only hold so much before its media loads up and the bypass opens.

If you would rather hand the job off, our oil change service in Creston handles European cartridge filters, and our foreign car repair in Grand Rapids covers oil leaks from the filter housing or its gasket. See us if you spot oil on the housing, a warning light or a low reading on the dash.
More Buying Guides
Frequently Asked Questions
Are MANN, MAHLE and Hengst filters as good as genuine BMW?
They are European filter makers that build elements to original-equipment specs, and their listings print the BMW part number they replace. As long as the number matches your engine, any of them is a sound choice.
Which oil filter fits a BMW X5 or X3?
It depends on the year and engine. Several listings here name the X3 and X5, but the element changed between engine families, so check the number on your old filter or use Amazon’s fit checker with your exact year and engine.
Do I need a new O-ring with every BMW oil filter?
Yes. Replace the cap O-ring at every change, and the drain plug washer too if your car uses one. Most cartridge filters include the cap seal, but check the box before you start.
Does an E46 use the same filter as a newer 3 Series?
Usually not. The E46 six-cylinder engines use a different element from the later N-series and B-series engines, so match the part number on the filter you remove rather than the model name.
Oil on the filter housing, a low oil warning or just no time to crawl under the car? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or book your oil change through our contact page.
Tied up during the workday? Our after-hours drop-off at 456 Carrier St NE in Creston means your BMW can come in before or after work.
