As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Silverado that thumps over expansion joints, pulls after a pothole or wears the inside edge of its front tires is often telling you about a control arm. The best control arms for Silverado trucks are the ones built for your exact generation, model and position, because Chevrolet changed the front end several times and the 1500 and HD trucks never shared parts.
We sorted six listings by truck and position. If you are not yet sure the arm is the problem, our article on control arm failure symptoms is written around Audis, but the clunks, shimmies and bushing cracks it describes look the same on a pickup.
Quick answer
Which control arms should a Silverado owner buy?
For a stock 1500, MOOG lists side-specific arms by generation, such as the RK620888 lower for 2007-2016 trucks and the RK623126 upper for 2014-2018. HD owners can look at the MOOG RK622128 or a Detroit Axle upper pair. Leveled 2007-2018 trucks often need forged uppers like Rough Country’s 19401A.
Our Quick Picks
Three listings that cover the most common Silverado front end jobs. Confirm your year, model, drivetrain and side on Amazon before you order.

MOOG RK620888
A MOOG lower arm assembly listed for the GMT900-era 1500 and early K2XX trucks.

MOOG RK622128
A MOOG upper arm assembly for heavy duty Silverado and Sierra trucks.

Rough Country 19401A
Upper arms that correct ball joint angle on lifted or leveled 2007-2018 trucks.
Pin Down the Generation, Model and Side First
Chevrolet has built four broad generations of the modern Silverado: 1999-2006 (plus the 2007 Classic), 2007-2013, 2014-2018 and 2019 onward. Each one has its own front suspension parts, and the 2019 1500 LD is a carryover of the older truck, so it often takes the 2014-2018 arms instead of the new ones.
The 2500HD and 3500HD run heavier arms on a different timeline, with a front end redesign that started in 2011. A part listed for a 1500 will not fit an HD, and the reverse is also true. Most OE-style arms are sold by side as well, so a left lower and a right lower carry different part numbers.
Before you add anything to a cart, write down the model year, 1500 or HD, 2WD or 4WD, and which corner is worn. Put those into Amazon’s fit checker and read the notes on the listing, since cab style and drivetrain can split fitment inside one model year.
Upper Arms, Lower Arms and Lift-Kit Uppers
Silverado trucks use a short upper arm and a longer lower arm on each side. On most versions the arm arrives as an assembly with the ball joint and bushings already pressed in, which saves a lot of press work on the bench. The lower arm carries the spring or strut load and usually takes the worst beating from potholes.
- OE-style lowers: the usual fix for torn rear bushings or a loose lower ball joint on a high-mileage truck.
- OE-style uppers: worth replacing when the upper joint has play or the bushings have split, common on trucks that tow.
- Lift-kit uppers: forged or tubular arms that change the ball joint angle on leveled and lifted trucks.
A leveling kit raises the front of the truck, which pushes the stock upper ball joint toward the end of its travel. Aftermarket uppers move the joint so it works in its normal range again and give the alignment shop more caster and camber to work with. Lowered trucks have the opposite problem, and drop kits usually come with their own arms or spindles, so check the kit maker’s instructions rather than buying arms separately.
Best Control Arms for Silverado: Six Listings by Truck
The first three listings cover stock Silverado 1500 trucks across three generations, the next two are for the 2011-2019 HD, and the last is an upper arm set for leveled trucks. Use the years and sides below as a shortlist, then confirm your truck on Amazon before ordering.
1. MOOG RK620888: Front Left Lower Control Arm for 2007-2016 Silverado 1500

- Front left lower position
- Listing names 2007-2016 Silverado 1500
- Alloy steel arm with ball joint
- Corrosion-resistant finish, as listed
The MOOG RK620888 is a front left lower control arm with the ball joint already in place. Its listing names the 2007-2016 Chevrolet Silverado 1500, along with the 2007-2014 Suburban 1500, the 2007-2013 Avalanche and several Escalade and Yukon XL models from the same platform. That covers the GMT900 trucks and the first years of the next body style, which share this lower arm design.
MOOG describes the arm as alloy steel with a corrosion-resistant coating, and the listing says it is built to handle everyday road stress while helping the front end hold its alignment. Because the joint comes fitted, you skip pressing a new ball joint into a tired old arm, which is often the slowest part of the job on a salted truck. The listing does not say whether the joint has a grease fitting, so check the photos if that matters to you.
This is the driver side only. The right side uses a separate MOOG part, and many owners replace both lowers together on a high-mileage truck. It is not listed for the 2500HD, and the listing’s compatibility notes do not mention the GMC Sierra 1500, so confirm your exact truck in Amazon’s fit checker and plan an alignment afterward.
2. MOOG RK623126: Front Right Upper Control Arm for 2014-2018 Silverado 1500

- Front right upper position
- Listing names 2014-2018 Silverado 1500
- Also lists 2019 Silverado 1500 LD
- Arm and ball joint assembly
The MOOG RK623126 is a front right upper control arm and ball joint assembly. Its listing names the 2014-2018 Chevrolet Silverado 1500 and the 2019 Silverado 1500 LD, plus 2015-2020 Tahoe, Suburban, Yukon XL and Escalade models. The LD mention is useful, since the 2019 LD looks new on the title but keeps the older front suspension.
Upper arms on these trucks carry less weight than the lowers, but the joint and bushings still wear, especially on trucks that tow or carry a plow frame. When the upper joint gets loose, you may feel a knock over bumps or see the steering wander on a crowned road. MOOG says this arm is designed to help maintain proper alignment and restore steady handling, and it arrives with the joint installed so the swap is mostly bolts.
It is the passenger side part, so a driver side repair needs the matching left arm. It is not listed for the redesigned 2019 and later Silverado or for HD trucks. On a leveled truck, consider whether a lift-style upper suits you better, and confirm fit for your cab and drivetrain on Amazon before buying.

3. MOOG RK620265: Front Left Lower Control Arm for 1999-2006 Silverado 1500

- Front left lower position
- Listing names 1999-2006 Silverado 1500
- Also lists 2007 Silverado 1500 Classic
- Arm and ball joint assembly
The MOOG RK620265 is a front left lower control arm and ball joint assembly for older trucks. The listing names the 1999-2003 and 2004-2006 Chevrolet Silverado 1500, the 2007 Silverado 1500 Classic and the matching GMC Sierra 1500 years. These are the GMT800 trucks, many of which have spent two decades on salted roads by now.
On a truck that age, the original lower arm often has cracked bushings and a ball joint that has worn past its limit, and the arm itself may be scaled with rust. Replacing the whole arm rather than pressing in a new joint can save time and avoids fighting a corroded bore. MOOG states that the arm is built to cope with everyday road stress and to help keep the wheel alignment where it should be.
The compatibility list we saw does not mention drivetrain, and 2WD and 4WD trucks from these years do not always share lower arms, so check yours carefully before ordering. The right side is a separate part, the RK620264. Confirm your year, cab and drivetrain in Amazon’s fit checker, and book an alignment once the new arm is installed.
4. MOOG RK622128: Front Upper Control Arm for 2011-2019 Silverado 2500 HD

- Front upper position
- Listing names 2011-2019 Silverado 2500 HD
- Also lists 3500 HD and Sierra HD
- Arm and ball joint assembly
The MOOG RK622128 is a front upper control arm and ball joint assembly for heavy duty trucks. Its listing names the 2011-2019 Chevrolet Silverado 2500 HD and 3500 HD, along with the GMC Sierra 2500 HD and 3500 HD for the same years. Those trucks share a front end design introduced for 2011, so one part number covers a long run.
HD Silverados spend a lot of their lives towing, hauling or pushing snow, and that load works the upper ball joint and bushings hard. A worn upper can show up as a clunk when you turn into a driveway or as camber that will not stay in spec at the alignment rack. MOOG describes the arm as built for everyday road stress and designed to support proper alignment and stable handling, with the joint already installed.
The listing title does not name a side, so check the description and photos to see whether it is sold for one side or fits both, and order a second if you are doing the pair. It does not fit Silverado 1500 trucks or the redesigned 2020 and later HD. Confirm your exact truck on Amazon, and plan an alignment after the swap.

5. Detroit Axle Upper Control Arm Pair: Two Arms with Ball Joints for 2011-2019 Silverado 2500 HD

- Two front upper arms in one kit
- Listing names 2011-2019 Silverado 2500 HD and 3500 HD
- Ball joints included on both arms
- 10-year warranty, as listed
The Detroit Axle kit includes two front upper control arms, each with its ball joint assembly fitted. The listing names the 2011-2019 Chevrolet Silverado 2500 HD and 3500 HD and the GMC Sierra 2500 HD and 3500 HD. Buying both sides in one box keeps the front end matched, which helps when both uppers have similar miles and wear.
Impact, wear and fatigue testing is part of Detroit Axle’s pitch, and the listing shows a 10-year warranty. The pair format suits owners who would rather replace both uppers at once than return for the second side in a few months. It is also a practical choice on a work truck, since the alignment only needs to be done once after both arms are in.
This kit is for upper arms only and does not include the lowers, tie rods or alignment hardware. It is not listed for the 1500 or for the 2020 and later HD trucks, and a lifted HD may need lift-specific uppers instead. Check your exact year, drivetrain and cab in Amazon’s fit checker before you order, and confirm the warranty terms on the listing.
View Detroit Axle HD Upper Pair on Amazon
6. Rough Country 19401A: Forged Aluminum Upper Control Arms for 2007-2018 Chevy and GMC Trucks

- Forged solid aluminum arms
- POM ball joints for lifted angles
- Clevite OEM-style rubber bushings
- Fully greaseable, as listed
The Rough Country 19401A is a pair of forged aluminum upper control arms. The listing names 2007-2018 Chevy and GMC trucks and SUVs, which takes in the Silverado 1500 and Sierra 1500 of those years. These are aimed at trucks with a leveling kit or lift, where the stock upper joint ends up at a steep angle.
Rough Country lists forged solid aluminum construction with no welds, and POM ball joints that give a greater range of motion. The company says the arms correct ball joint angle for lifted applications, which can ease bind and give the alignment tech more room to set camber and caster. The bushings are Clevite OEM-style rubber, the arms are listed as fully greaseable, and the maker states a limited lifetime replacement warranty.
The data we saw does not state a lift height range, so check the listing and Rough Country’s instructions to make sure the arms match your kit. They are not meant for HD trucks or the 2019 and later redesign, and a stock-height truck gains little from them. Confirm fit on Amazon for your cab and drivetrain, and get the truck aligned after installation.
View Rough Country 19401A on Amazon
Silverado Control Arm Fit Chart
Here are the best control arms for Silverado trucks from above, matched to the corners each listing names. A part can still exclude certain cabs or drivetrains inside those years.
| Silverado years | Model | Position | Listing to check |
|---|---|---|---|
| 1999-2006, 2007 Classic | 1500 | Front left lower | MOOG RK620265 |
| 2007-2016 | 1500 | Front left lower | MOOG RK620888 |
| 2014-2018, 2019 LD | 1500 | Front right upper | MOOG RK623126 |
| 2011-2019 | 2500 HD, 3500 HD | Front upper | MOOG RK622128, Detroit Axle upper pair |
| 2007-2018 | 1500, leveled or lifted | Front upper pair | Rough Country 19401A |

Salt, Potholes and Leveled Trucks in West Michigan
Road brine is hard on Silverado front ends. Salt creeps into split bushings and torn ball joint boots, and the cam bolts that set alignment on many of these trucks can rust solid in their slots. Budget for seized hardware and fresh bolts.
Freeze-thaw potholes add another layer. A hard hit can bend a lower arm or tear its rear bushing, and the truck may pull or shake under braking afterward. Worn shocks make it worse, since the arm takes more of each impact, so our guide to shocks and struts for daily drivers is worth a look while the front end is apart.

Leveled trucks see their own wear. Front leveling kits are a popular add-on for bigger tires or plow clearance, and the stock uppers on those trucks often show joint wear early. For lift height limits, load ratings and torque values, start with your truck’s owner’s manual on Chevrolet’s manuals and guides page, then follow the arm maker’s instructions.
Doing the Swap at Home or Booking a Shop
Replacing a Silverado control arm means supporting the frame, unloading the torsion bar, coil spring or strut, separating the ball joint taper and freeing the pivot bolts. On trucks with coil-over struts, the strut assembly needs careful handling, because a compressed spring stores a lot of energy.

Tighten bushing bolts with the truck at ride height, not hanging on the jack, or the new rubber will twist and wear early. Book an alignment as soon as the arms are in. For a broader look at the brands themselves, our roundup of the best control arm brands compares MOOG, Mevotech and others.
Even the best control arms for Silverado front ends need a careful install and a proper alignment to ride right. Our suspension repair service in Grand Rapids handles control arm inspection, replacement and the steering checks that go with it. Hendrick Hoffman, who owns the shop, carries ASE and State of Michigan steering and suspension certification.
More Buying Guides
Frequently Asked Questions
Does a 2019 Silverado 1500 use the 2014-2018 control arms?
The 2019 Silverado 1500 LD usually does, because it carries over the previous truck. The redesigned 2019 1500 uses different parts. The MOOG RK623126 listing names the 2019 LD alongside 2014-2018 trucks, so check which version you have before ordering.
Are Silverado control arms sold by side?
Most OE-style arms are. MOOG, for example, lists the RK620888 as a front left lower, with a separate part for the right. Pairs and lift-kit sets include both sides in one box.
Do I need new upper control arms after leveling my Silverado?
Not always, but many leveled 2007-2018 trucks show upper ball joint bind or run out of camber adjustment. Aftermarket uppers correct the joint angle. Follow the lift height the arm maker states for its product.
Is an alignment needed after replacing Silverado control arms?
Yes. New arms and loosened cam bolts change camber, caster and toe, so get the truck aligned right after the job to keep it tracking straight and save the tires.
Silverado wandering on the highway or knocking every time you pull into the driveway? Ring 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or book a front end check through our contact page.
Busy during shop hours? Our after-hours drop-off at 456 Carrier St NE, Grand Rapids, MI 49505 lets you leave the Silverado and its keys once your own workday is done.
