As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Worn front struts on a Mazda CX-5 tend to show up slowly. The crossover starts to float after dips, the nose bobs once or twice past a railroad crossing and a dull knock appears over broken pavement. Choosing the best struts for Mazda CX 5 models starts with the model year and drive type, then comes down to whether you want a complete bolt-in corner or just the damper.
This guide covers front strut listings for the first-generation 2013 to 2016 CX-5 and the second generation that began with the 2017 model year. If you are shopping for a different car or crossover, our roundup of shocks and struts for daily drivers is a better place to start.
Quick answer
Which front struts fit a Mazda CX-5?
It depends on the year. A 2013 to 2016 CX-5 has a simple bolt-in option in the Monroe Quick-Strut 182978, AWD owners of that generation can buy the Unity front pair, and a 2017 to 2021 CX-5 can take the loaded AISIN SAKZ-01295. Confirm side, year and drive type before ordering.
Our Quick Picks
Three quick picks that cover most owners: a bolt-in Monroe corner and an AWD Unity pair for the 2013 to 2016 CX-5, plus a loaded AISIN unit for 2017 to 2021. All six listings are reviewed below.

Monroe Quick-Strut 182978
A complete OE-style corner that restores factory ride height.

Unity 2-11695-11696-001 Front Pair
Both front corners in one kit for first-generation AWD models.

AISIN SAKZ-01295
A preassembled front corner for the second-generation CX-5.
Which CX-5 Do You Have? Years, Drive Type and Position
Every CX-5 uses a MacPherson strut at each front wheel, with the coil spring wrapped around the damper and a mount on top. The rear rides on a separate shock and spring, so a “strut” listing for this crossover almost always means a front part. Rear shocks are their own purchase.
- 2013 to 2016: the first generation. Several listings split 2013 models by build date, so check the qualifier notes if yours is an early 2013.
- 2017 and later: the second generation, with different strut lengths and mounts. Most aftermarket listings for it name 2017 to 2019 or 2017 to 2021.
- Drive type: older CX-5s were sold with front-wheel drive or AWD, and some strut kits fit only one of them.
Mazda now fits every new CX-5 with i-Activ AWD as standard, according to Mazda USA’s CX-5 model page. Aftermarket coverage for the newest model years is still thin.
Loaded Assembly or Bare Strut for a CX-5
- Loaded (complete) assembly: the damper, coil spring, bearing plate and top mount arrive bolted together. You remove the old corner and install the new one as a unit, which also renews a tired spring and a worn mount.
- Bare strut: only the damper. You reuse the original spring and mount, which means compressing the spring to take the old strut apart.
A compressed coil spring stores enough energy to cause serious injury if a tool slips. Read our guide to picking a coil spring compressor before you take apart a bare strut job yourself. With either type, replace both front struts together so the CX-5 sits level and brakes straight.
Best Struts for Mazda CX 5: Six Front Listings in Detail
Every listing below names the CX-5 on Amazon, but coverage differs by year, side and drive type. Enter your vehicle in Amazon’s fit checker and read the qualifier notes before you order, because no single part fits every CX-5.
1. Monroe Quick-Strut 182978: Strut and Coil Spring Assembly for 2013-2016 Mazda CX-5

- Listed for 2013 and 2014-2016 Mazda CX-5
- Strut, spring and upper mount preassembled
- No spring compressor needed
- Coating and salt spray testing for rust
Monroe’s Quick-Strut 182978 is a loaded strut assembly whose listing names the 2013 CX-5 and the 2014 to 2016 CX-5, the first generation of the crossover. It comes with the strut, an application-specific coil spring and the upper strut mount already assembled, so the whole corner goes in as one piece. Monroe sells it per side, and 182979 is the companion number, so check which side each one covers and order both.
The listing says the spring is calibrated to the original design to bring back factory ride height and carry the vehicle’s weight. Monroe also points to a premium upper mount meant to restore smooth steering and cut noise and memory steer, plus a protective coating and salt spray testing for corrosion. For a CX-5 that has spent years on salted roads, a fresh spring and mount in the same box can solve more than one problem.
Because nothing has to be compressed, this is a sensible route for a home mechanic with basic tools and jack stands. It is not a performance upgrade, and it suits owners who simply want the original ride back. Confirm your year and build date in the fit checker, then book an alignment once both sides are in.
View Monroe Quick-Strut 182978 on Amazon
2. Unity 2-11695-11696-001: Front Complete Strut Assembly Pair for 2013-2016 Mazda CX-5 AWD

- Front pair for 2013-2016 Mazda CX-5
- Excludes FWD models
- Top mount, bearing plate and spring included
- No specialty tools needed
Unity’s 2-11695-11696-001 kit puts both front corners in one box for the 2013 to 2016 Mazda CX-5. The listing is clear that it excludes front-wheel-drive models, so it is a match only for AWD crossovers of that generation. Buying the pair saves you from matching two separate part numbers and keeps both sides of the axle identical.
Each strut arrives preassembled with the top mount, bearing plate, bump stop, insulators and coil spring. Unity says the assembly restores factory ride height and gives a stable, comfortable ride, and it is engineered for a direct fit so you do not need specialty tools such as a spring compressor. The bearing plate matters on a strut that turns with the steering, because a worn one can cause a notchy or noisy feel when you turn the wheel.
This kit suits a high-mileage AWD CX-5 whose springs have sagged along with the struts, since everything above the knuckle is new. It does not suit FWD models or the 2017 and later generation. As with any strut swap, plan on an alignment, and check the rear shocks while the vehicle is in the air so you know whether they are due as well.
View Unity 2-11695-11696-001 Front Pair on Amazon

3. AISIN SAKZ-01295: Front Strut and Coil Spring Assembly for 2017-2021 Mazda CX-5

- Listed for 2017-2021 Mazda CX-5
- Front left and right position
- Gas-charged twin-tube design
- Installation manual included
The AISIN Aftermarket SAKZ-01295 is a front strut and coil spring assembly listed for the 2017 to 2021 Mazda CX-5, which makes it the only loaded option in this guide for the second generation. AISIN has supplied the auto industry since 1965, and this aftermarket line combines the strut, coil spring and upper components in one preassembled unit.
The listing gives the position as front left and right, with a gas-charged, twin-tube construction. It also gives an extended length of 23.58 inches, a compressed length of 15.87 inches and a stroke of 7.71 inches, which helps if you want to compare it with the original part. AISIN says the validated damping design supports stable suspension response and proper ride height, and an installation manual comes in the box for a direct replacement.
Because the spring and mount are already attached, the job avoids spring compression, and replacing several wear parts at once makes sense on a CX-5 with high miles. Confirm whether your listing ships one unit or a pair, and order enough for both front corners. It does not fit the 2013 to 2016 generation, and newer CX-5 years should be checked in the fit checker before you buy.
View AISIN SAKZ-01295 on Amazon
4. Bilstein B4 OE Replacement 22-290977: Front Left Twin-Tube Strut for 2017-2019 Mazda CX-5

- Listed for 2017-2019 Mazda CX-5, front left
- OE replacement twin-tube design
- Bilstein gas-pressure technology
- Constant damping under any load
Bilstein’s B4 OE Replacement line is built to match original-equipment ride quality, and part 22-290977 is listed as the front left strut for the 2017 to 2019 Mazda CX-5. It is a twin-tube design, and like most bare struts it is sold one side at a time, so you will need the matching right-side part from the same line to do the axle properly.
Bilstein describes the B4 as delivering constant damping power under any load and the driving experience of the vehicle when new. The listing credits its gas-pressure technology with traction and precise handling, and it points to the brand’s wide market coverage. That makes this a good fit for a driver who wants the factory feel back rather than a firmer or lowered setup.
This is a bare strut, so the original spring, top mount and bearing plate move over from the old unit. That transfer needs a proper spring compressor and some care, or you can have a shop do the assembly. If your mounts or springs are worn, a loaded unit may cost less in labor overall. Check the fit checker for your exact year before ordering, and align the car afterward.
View Bilstein B4 22-290977 on Amazon

5. KYB Excel-G 339337: Gas Strut Calibrated for the Mazda CX-5

- Calibrated for the Mazda CX-5
- Seamless cylinder, Teflon-banded piston
- Triple chrome plated piston rod
- Multi-lip oil seals to reduce wear
KYB’s Excel-G 339337 is a bare gas strut whose listing says it is calibrated to restore the original handling and control of the Mazda CX-5. KYB describes the Excel-G line as an original equipment replacement choice for Asian SUVs and crossovers. The listing title does not state model years or a side, so use the fit checker to confirm which CX-5 and which front corner it covers.
Construction details in the listing include a seamless working cylinder matched with a Teflon-coated piston band for a positive seal and longer life. The piston rod is triple chrome plated, and multi-lip oil seals are there to reduce wear. KYB also lists solid seamless mounting rings and bushings meant to stop rattles, which matters on a crossover that sees rough city streets every day.
Because this is a damper only, you reuse your coil spring and top mount, which keeps the parts list short when those pieces are still in good shape. The trade-off is the spring transfer, which calls for a compressor rated for the job. It suits owners who want a familiar OE-style brand and are comfortable with the extra steps. Order the matching opposite-side strut so the front axle stays even.
View KYB Excel-G 339337 on Amazon
6. Monroe OESpectrum 72978: Twin Technology Strut for 2013-2016 Mazda CX-5

- Title lists 2013-2016 Mazda CX-5
- Rod displaced valving tuned per vehicle
- PTFE-banded piston and nitrogen charge
- Limited lifetime warranty
The Monroe OESpectrum 72978 is a bare strut whose title names the 2013 to 2016 Mazda CX-5, while a bullet in the same listing says 2013 to 2018. That difference is a good reason to check your exact year in the fit checker before you buy. Like the Quick-Strut above, it is a per-side part, so look for the matching opposite-side number as well.
Monroe’s Twin Technology Active Control System is meant to deliver control under most driving conditions while isolating impact noise, vibration and harshness. The listing describes rod displaced valving tuned to each vehicle, OE all-weather fluid that resists breakdown in extreme temperatures, a PTFE-banded piston and a nitrogen gas charge that reduces aeration. A protective boot and jounce bumper are optional and sold separately, and the strut carries Monroe’s limited lifetime warranty.
This is a good match for a CX-5 whose springs and mounts are still healthy, since you reuse them and replace only the damper. Since the boot and bump stop are not included, inspect the old ones and replace any that are torn or crumbling. The spring transfer needs a compressor, so it suits experienced DIYers or a shop install. Schedule an alignment once both struts are in.
View Monroe OESpectrum 72978 on Amazon
Shortlisting a Strut by Model Year
Start with the row that matches your crossover, then check the part number against your VIN or the fit checker.
| Your CX-5 | Listing to check | Type | Note |
|---|---|---|---|
| 2013 to 2016, easy bolt-in | Monroe Quick-Strut 182978 | Loaded, per side | Pair it with the opposite side |
| 2013 to 2016 AWD | Unity 2-11695-11696-001 | Loaded front pair | Listing excludes FWD |
| 2017 to 2021 | AISIN SAKZ-01295 | Loaded | Confirm left and right coverage |
| 2017 to 2019, keep original springs | Bilstein B4 22-290977 | Bare, front left | Spring transfer needed |
| CX-5, years per fit checker | KYB Excel-G 339337 | Bare | Title lists no years |
| 2013 to 2016 (listing also says to 2018) | Monroe OESpectrum 72978 | Bare | Verify the year range |

Before you buy, make sure a strut is really the problem. A rattle or squeak over speed bumps on a CX-5 often comes from a sway bar end link or bushing, and our article on why a car squeaks when going over bumps walks through those simpler causes.
Potholes, Salt and the CX-5 Front End
A West Michigan winter is hard on a compact crossover’s struts. Freeze-thaw cycles open potholes on the same roads every spring, and each hard hit drives the damper toward full compression. Over time the seals weaken, oil seeps out and the front loses its control over bumps.
Watch for a damp, dirty film on the strut body, extra bounce after dips, nose dive under braking and cupped front tires. Our guide on how to tell if struts are bad covers each sign in more detail. The Car Care Council’s vehicle systems overview also groups steering and suspension checks you can do at home.

Salt also slows removal. The strut-to-knuckle bolts can rust tight and end link nuts often spin on corroded studs, so soak the hardware with penetrating oil a day ahead.
Fitting the New Struts and Getting an Alignment
On a CX-5, a loaded assembly is a fair job for a careful home mechanic with jack stands, a torque wrench and an afternoon. A bare strut adds the spring transfer, which is the step most likely to go wrong. If you do not have a compressor made for the job, hand that part to a shop.
Either way, book a wheel alignment afterward. Removing the strut from the knuckle can shift camber and toe slightly, and even a small change can pull the CX-5 to one side and wear the front tires unevenly. Even the best struts for Mazda CX 5 crossovers need straight wheels to ride the way they should.

Would you rather skip the rusted bolts? Our suspension repair service in Grand Rapids covers struts, shocks, mounts, end links and the steering parts around them. You can read about Hendrick Hoffman’s training and his ASE and State of Michigan steering and suspension credentials on our about us page.
More Buying Guides
Frequently Asked Questions
Are CX-5 struts the same for FWD and AWD models?
Not always. Some kits list only one drive type, and the Unity front pair in this guide excludes FWD models. Enter your drive type in the fit checker and read the qualifier notes before you order.
Will 2017 CX-5 struts fit a 2016?
Generally no. The 2017 model year began a new generation, and strut listings for it are separate from the 2013 to 2016 parts. Buy a listing that names your exact year.
Should I replace the rear shocks at the same time?
It is worth checking them. If the rear shocks are original and the mileage is high, they are likely as worn as the fronts. Replacing them soon after keeps the ride and braking balanced front to rear.
Do I need an alignment after new CX-5 struts?
Yes. Taking the strut off the knuckle can change camber and toe, and the effect shows up as a pull or uneven tire wear. An alignment after the job protects the tires and keeps the steering centered.
Does your CX-5 bounce, knock or wander on Grand Rapids roads? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a front suspension check through our contact page.
If your workday overlaps our hours, bring the CX-5 to 456 Carrier St NE once we have closed and leave it through the after-hours drop-off.
