456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

MDX, RDX, TLX or TSX? Choosing the Best Shocks and Struts for Acura

best shocks and struts for acura: highway running toward the sea

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

An Acura is meant to feel settled and quiet, so worn dampers stand out fast: the nose dips hard at every stop, the body keeps bobbing after a dip and potholes arrive as a thud instead of a muffled bump. The best shocks and struts for Acura owners are the parts listed for their exact model and generation, since an MDX, an RDX, a TLX and a TSX each use their own hardware.

Below you will find how the suspension differs across those four models, what to check before ordering and five specific Amazon listings matched to named Acuras. Still unsure whether the dampers are to blame? Start with our walk-through on how to tell if struts are bad, including why a bounce test alone can mislead you.

Quick answer

What shocks and struts should an Acura get?

Most Acura owners do well with an OE-style replacement built for their model. Loaded assemblies from Unity, Gabriel ReadyMount or Monroe Quick-Strut suit the MDX and TLX front end, while bare units such as Monroe OESpectrum or KYB Excel-G cover RDX and TSX rear corners. Confirm year, trim and position before buying.

Our Quick Picks

Three quick picks: a complete strut for the third-generation MDX, a loaded assembly for the TLX and a bare rear strut for the TSX. All five listings are reviewed below.

Unity 13251 Complete Strut product photo
Third-gen MDX

Unity 13251 Complete Strut

Complete strut · 2014-2020 MDX front left

A bolt-in front corner for the later MDX.

SuitsMDX owners renewing tired mounts and springs
View on Amazon →
Monroe Quick-Strut 372970 product photo
TLX pick

Monroe Quick-Strut 372970

Loaded strut · 2015-2020 TLX

Monroe's complete assembly for the first-generation TLX.

SuitsTLX drivers keeping factory ride height
View on Amazon →
KYB Excel-G 341495 product photo
TSX pick

KYB Excel-G 341495

Bare strut · Acura TSX

An OE-grade KYB unit for the TSX rear.

SuitsTSX owners reusing the factory spring
View on Amazon →

How Acura Suspension Differs by Model

Acura shares platforms with Honda, so each model inherits the layout of its Honda cousin. The MDX, RDX and the 2015 to 2020 TLX carry MacPherson struts at the front, where the damper, coil spring and upper mount together hold up the corner and steer the wheel. The 2004 to 2014 TSX instead uses a double-wishbone layout, with a shock-and-spring unit sitting between two control arms.

The rear varies even more. Some models carry a rear strut with its own spring, while others use a separate shock and a spring in its own seat. That is why a part number listed for one Acura rarely crosses over to another, even within the same year.

  • Loaded or complete strut: damper, spring, mount and boot come as one bolt-in unit, with no spring compressor needed.
  • Bare strut or shock: the damper alone, so the old spring and mount move across or get replaced separately.
  • Electronic dampers: some MDX trims came with an adaptive system, and those cars need parts made for electronic suspension.
  • Sided parts: many front assemblies are sold as left or right, so you order one of each.

Ordering the Right Part for Your Acura

None of the listings below fits every Acura, and you should not expect one to. Each names its own models and years, which is a starting point rather than a guarantee. Put your vehicle into the Amazon fit checker with these details before you order:

  1. Model year and generation, since a 2013 MDX and a 2014 MDX share almost nothing under the fenders.
  2. Trim and package, which tells you whether electronic dampers were fitted.
  3. Drivetrain, front-wheel drive or SH-AWD, because spring rates and ride heights can differ.
  4. Engine, where a four-cylinder and a V6 version of the same car use different springs.
  5. Corner: front or rear, then driver or passenger side.

The VIN and the part number stamped on your old unit are the strongest cross-checks. Whatever you choose, buy for both sides of the axle so the car leans, brakes and steers evenly.

Best Shocks and Struts for Acura: Five Listings Across Four Models

Each entry is one Amazon US listing tied to a named Acura and position. If your model is covered by a different part number from the same brand, use the review to judge the product line and then search that brand’s catalog for your car.

1. Unity Automotive 13251: Front Left Complete Strut Assembly for 2014-2020 Acura MDX

Unity 13251 Complete Strut product photo
Key features
  • Listed for 2014-2020 Acura MDX
  • Front left (FL) position, 1 per vehicle
  • Pre-assembled strut with top mount hardware
  • Installation instructions included

The third-generation MDX is now old enough that many examples are running on original front struts, and the mounts and springs have aged with them. This Unity Automotive listing is part 13251, a complete strut assembly that names the 2014 to 2020 Acura MDX and the front left position, with one needed per vehicle.

Unity builds the whole corner as a single pre-assembled unit, so the strut arrives with its coil spring and top mount hardware already in place, and instructions come in the box. The maker frames the main benefit as eliminating the reuse of old parts, which matters on an SUV whose upper mount and bearing may be ten years old. Because the spring stays captive in the assembly, the job skips the spring compressor that a bare strut would need.

Since this part covers only the driver side, order the matching front right unit, Unity 13252, so both sides are renewed together. MDX versions differ by drivetrain and package, and some trims of this generation use features that change the front suspension, so run your year, trim and drivetrain through the Amazon fit checker and read the notes before buying. Expect to book a wheel alignment once both assemblies are in, because the strut locates the top of the wheel.

View Unity 13251 Complete Strut on Amazon

2. Gabriel G57561 Ultra ReadyMount: Front Right Strut and Coil Spring Assembly for 2007-2013 Acura MDX

Gabriel G57561 Ultra ReadyMount product photo
Key features
  • Listed for 07-13 Acura MDX, 1-pack
  • Front right strut and coil spring assembly
  • Pre-assembled, no spring compressor needed
  • 7.8 in stroke, interchanges with 172433 and 11714

Plenty of second-generation MDX models are still in daily service on their original front struts, often with high mileage and a decade of winters behind them. Gabriel’s G57561 is an Ultra ReadyMount strut and coil spring assembly whose listing names the 2007 to 2013 Acura MDX and the front right position, sold as a single unit.

ReadyMount is Gabriel’s loaded line, and the listing describes a pre-assembled corner that removes the need for spring compression during installation. Its spec line gives a 7.8 inch stroke, a 24.69 inch extended length and a 16.89 inch collapsed length, which helps when you compare it with the old part. The interchange list includes Monroe 172433 and Unity 11714, a useful cross-check if you already have one of those numbers from a parts receipt.

Pair it with the matching front left part so the axle stays balanced. Some MDX trims of this era were sold with an adaptive damper system, and a conventional assembly is not a direct replacement on those cars, so confirm your trim and package in the Amazon fit checker before ordering. After installation, plan on an alignment, since a front strut swap on this layout can move camber and toe.

View Gabriel G57561 Ultra ReadyMount on Amazon

winding mountain road

3. Monroe Quick-Strut 372970: Strut and Coil Spring Assembly for 2015-2020 Acura TLX

Monroe Quick-Strut 372970 product photo
Key features
  • Listed for 2015-2020 Acura TLX
  • Strut, coil spring and upper mount preassembled
  • No spring compressor needed
  • Protective coating, salt spray tested

The first-generation TLX replaced both the TL and the TSX, and its front end uses a strut design shared with the Accord of the same period. Monroe’s Quick-Strut 372970 is a strut and coil spring assembly whose compatibility line names the 2015 to 2020 Acura TLX.

Quick-Strut is Monroe’s loaded range, so the upper strut mount, application-specific coil spring and strut arrive as one fully assembled unit with no spring compressor required. Monroe says the spring is calibrated to the OE design to restore ride height and support the car’s weight, and that the premium upper mount helps reduce noise, vibration, harshness and memory steer. The maker also notes a protective coating with salt spray testing to resist rust, which counts for a sedan that sees Michigan winters.

The listing title does not spell out which corner it covers, and TLX parts differ between the four-cylinder and V6 cars and between front-drive and SH-AWD versions. Enter your year, engine and drivetrain in the Amazon fit checker, read the qualifier notes to confirm position and side, and order the opposite-side assembly so the axle is done as a pair. Schedule an alignment afterward.

View Monroe Quick-Strut 372970 on Amazon

4. Monroe OESpectrum 37326: Twin-Tube Shock Absorber for 2007-2012 Acura RDX

Monroe OESpectrum 37326 product photo
Key features
  • Listed for 2007-2012 Acura RDX
  • Full displaced valving tuned to the vehicle
  • PTFE-banded piston for consistent sealing
  • Nitrogen gas charge, all-weather fluid

The first-generation RDX pairs front struts with separate shock absorbers at the back, and those rear shocks often fade quietly until the tail starts to float over highway seams. Monroe’s OESpectrum 37326 is a shock absorber whose listing names the 2007 to 2012 Acura RDX.

OESpectrum is Monroe’s OE-style twin-tube range for restoring the original ride. The listing describes full displaced valving tuned to each vehicle, a larger bore for efficient damping, and a PTFE-banded piston that seals against the pressure tube for consistent control. A nitrogen gas charge is there to reduce aeration and fade, and Monroe says its all-weather fluid includes additives to cope with temperature extremes, which applies to cold starts in a Grand Rapids January.

This is a bare shock, so it does not include a spring, mount or boot, and you should look over the bump stop and dust cover while the old shock is out. Buy two so both rear corners match. The RDX came in front-drive and SH-AWD form, so enter year, drivetrain and trim in the Amazon fit checker and check the position notes before you order. Rear shock work on this layout usually needs no alignment unless other parts are disturbed.

View Monroe OESpectrum 37326 on Amazon

car on a wet autumn road

5. KYB Excel-G 341495: Twin-Tube Gas Strut for Acura TSX

KYB Excel-G 341495 product photo
Key features
  • Calibrated for the Acura TSX
  • Replaces 52611SECA04, G51738 and 72324
  • Teflon-coated piston band, seamless cylinder
  • Triple chrome plated rod, multi-lip seals

The TSX has a loyal following, and many owners keep them long after the warranty ends, which means original dampers are common. KYB’s Excel-G 341495 is a gas strut whose listing says it is calibrated to restore the original handling and control of the Acura TSX, and it lists Honda part 52611SECA04 plus Gabriel G51738 and Monroe 72324 as replacements.

Excel-G is KYB’s OE-grade twin-tube line, and the listing highlights a seamless working cylinder matched with a Teflon-coated piston band for a positive seal and longer life. It also lists a triple chrome plated piston rod, multi-lip oil seals and a sintered iron rod guide that KYB says helps retain correct wheel alignment. The 52611 prefix in the Honda number points to a rear unit, so treat this as a rear part and confirm it in the fit checker.

Because this is a bare strut, the existing coil spring and mount transfer to the new damper, which takes a spring compressor and some care. Order two so both rear corners match, and inspect the mount and bump stop while everything is apart. The TSX was built in two generations, so enter your exact year and trim in the Amazon fit checker and read the notes before you buy.

View KYB Excel-G 341495 on Amazon

Loaded or Bare: Which Suits Your Acura

The table sorts the five listings by how much of the corner they replace. Pick the row that matches your skills, your tools and the age of the parts around the damper.

TypeListings hereGood forWatch for
Complete strutUnity 13251 (2014-2020 MDX)High-mileage SUVs with tired mountsSold per corner, so order the matching right side
Loaded strut with OE-style mountGabriel ReadyMount G57561 (2007-2013 MDX), Monroe Quick-Strut 372970 (2015-2020 TLX)Owners who want the whole corner renewed at onceCheck trims with electronic dampers
Bare shockMonroe OESpectrum 37326 (2007-2012 RDX)Rear corners where the spring is still healthyInspect the bump stop and dust boot
Bare strutKYB Excel-G 341495 (TSX)Drivers keeping the factory spring and mountMoving a spring needs a compressor
Acura shock and strut types compared by what each replaces

Loaded units cost more per corner but save labor and replace rubber that has aged alongside the damper. Gabriel describes its ReadyMount strut assemblies as arriving with the upper mount, bumper, boot, coil spring and spring seat already fitted, and says each new design is fit and ride tested on the vehicle.

A bare strut makes sense when the spring and mount are sound, but the spring has to come off the old unit first. That calls for a proper tool, and our guide to the best coil spring compressor explains which styles are safe for which job. A compressed spring holds a lot of energy, so never improvise with ratchet straps or threaded rod.

black and white close-up of wrenches and pliers

Driving something other than an Acura as well? Our broader roundup of the best shocks and struts for daily drivers covers popular sedans, crossovers and pickups from other brands.

Salt, Potholes and Acura Dampers in West Michigan

A Grand Rapids winter tests every part of a suspension. Brine and rock salt coat the strut bodies and spring seats for months, then spring thaws open potholes on almost every street. On an older MDX or RDX it is common to find a strut seeping oil, a spring perch flaking with rust or a lower bolt that will not turn.

Noise is not always the damper. A dry upper mount, a split bump stop or a worn stabilizer link can creak or knock in the cold just like a failing strut. Our article on why a car squeaks when going over bumps helps you narrow down which part is talking.

row of colorful garage doors

After a hard hit, check each corner for wet streaks on the strut body, a corner that sits lower than the others and fresh scalloping on the tire tread. Any one of those is reason to get the car on a lift before a long highway trip.

When an Acura Strut Job Should Go to a Shop

Rear shocks on many Acuras are a reasonable home job if you own jack stands and a torque wrench. Front corners are another matter, with heavy assemblies, seized salt-belt hardware and, on bare struts, a loaded spring to manage. Cars with electronic dampers also need the fault codes read before any parts are ordered.

Plan an alignment after front strut work. Monroe recommends an alignment whenever struts are replaced, noting that camber and toe can shift, and lists some double-wishbone and shock-based setups as exceptions. That makes a TSX rear shock swap lower risk than an MDX front strut job.

city traffic at dusk

Our team handles suspension repair in Grand Rapids for Acuras and other foreign and domestic vehicles, from struts and shocks to mounts, links and steering parts. Steering and suspension is one of the areas where Hendrick Hoffman holds both ASE and State of Michigan certification.

Frequently Asked Questions

Does my Acura have shocks or struts?

Usually both. The MDX, RDX and recent TLX have struts at the front, and the rear uses either struts or shocks depending on the model. The 2004 to 2014 TSX uses double wishbones with shock-and-spring units, so check the position named in each listing.

Can I fit standard struts to an MDX with electronic dampers?

Not as a direct swap. Trims with an adaptive damper system need parts made for electronic suspension, and some complete strut kits for the MDX state that they exclude it. Check your trim and package in the fit checker first.

Do I replace Acura struts one side at a time?

Replace them as an axle pair. Many listings cover a single corner, so order both the left and the right part. One new strut beside a worn one leaves the car uneven in braking and cornering.

Are the best shocks and struts for Acura always the factory part?

No. OE-style lines from Monroe, KYB, Gabriel and Unity aim to restore the original ride and height. What matters most is a part listed for your exact model, year, drivetrain and corner.

Is your Acura nose-diving at stops or knocking over rough pavement? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or schedule a suspension inspection through our contact page.

If your workday overlaps our hours, the after-hours drop-off at 456 Carrier St NE, Grand Rapids, lets you bring the Acura in when it suits you.