As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Duramax holds a lot of oil, works hard and often tows, so the filter on it earns its keep. The good news is that the choice is narrower than the shelf at the parts store suggests. The best oil filter for Duramax trucks is the one built to the right GM number for your engine generation, with a bypass valve and anti-drainback valve that behave like the original.
This guide matches filter numbers to engines, explains factory versus “upgrade” filters, and reviews six filters for the 6.6L and 3.0L. For gas engines and general brand comparisons, see our roundup of the best oil filter brand for spin-on filters.
Quick answer
Which oil filter does a Duramax take?
Most 2001-2019 6.6L trucks use the ACDelco PF2232 or a cross such as the WIX 57202XP. The 2020-on 6.6L L5P uses a PF26-type filter, like the PPE 114000750. The 3.0L inline six takes a smaller PF66-type filter. Always match the number on the filter you remove.
Our Quick Picks
Three quick picks: the factory number for 2001-2019 6.6L trucks, a heavy-duty filter for the 2020-on L5P, and a filter for the 3.0L inline six. All six filters are reviewed below.

ACDelco PF2232
The ACDelco number that most 2001-2019 Duramax crosses are built to replace.

PPE 114000750
PPE's tall replacement for the PF26 on newer L5P trucks.

Doc's Diesel 3.0L
A PF66-pattern filter for the half-ton and SUV diesel.
Three Filter Numbers Cover Nearly Every Duramax
The 6.6L V8 has gone through several generations: LB7, LLY, LBZ, LMM and LML, then the L5P that arrived for 2017. For all of those years up to 2019, the filter listings in this guide point to the same family, the ACDelco PF2232 and its crosses. So a filter bought for an LBZ is usually the same part an LML takes.
The 2020-on L5P moved to a different, larger filter, the PF26 family, and the listings for those filters say plainly that they do not fit 2001-2019 pickups. Some sellers also note that later L5P trucks shipped with yet another factory number. The 3.0L inline six in the half-ton trucks and full-size SUVs (LM2, later LZ0) is a separate engine with its own, smaller PF66-type filter.
- Read the old filter: the part number is printed on the can, and it is the most reliable guide you have.
- Check the engine, not just the model: a Silverado 2500HD from 2019 and one from 2020 take different filters.
- Check fitment: give Amazon your Duramax truck’s year, model and engine first.
What Matters in a Diesel Oil Filter
Diesel oil carries soot along with the usual dirt and wear metal. The US EPA notes that used oil picks up dirt, metal scrapings and water over time, which is why the oil and filter get replaced together. A good filter keeps that debris out of the bearings and turbo without starving the engine of flow on a cold start.
Two valves do most of the quiet work. The anti-drainback valve keeps oil in the filter when the engine is off, so pressure builds quickly at start-up. The bypass valve lets oil go around the media if the filter clogs or the oil is very thick, which beats no flow at all. Upgrade filters often set the bypass higher or add a magnet, and their micron claims are the makers’ own figures, measured in different ways.
Best Oil Filter for Duramax: Six Filters by Engine
Fitment notes below come from each Amazon listing. There is no single best oil filter for Duramax engines of every year, so confirm your year, model and engine with Amazon’s fit checker before you buy.
1. ACDelco PF2232 (88917036): Factory-Number Spin-On Oil Filter, 12 Pack

- GM original-equipment brand
- Part number PF2232 (88917036)
- Twelve filters in one box
- The number other listings cross to
The ACDelco PF2232 is the filter number that most 6.6L Duramax owners will find on the can when they drain the oil. ACDelco is GM’s own parts brand, and the listing carries GM number 88917036. It is sold here as a twelve-pack, enough for years of changes on one truck. The listing itself gives only the part number, so use the fit checker for your exact truck.
The reason this filter leads the list is simple: it is the reference point. The Baldwin, Doc’s Diesel and DmaxStore listings for 2001-2019 trucks all say they replace the PF2232, which tells you which family your engine uses. Buying the factory number means the bypass setting, thread and gasket size match what the engine was built around, with nothing to second-guess.
It suits owners who want the stock part, those who keep records by GM number, and anyone running a few trucks of the same age. It does not fit the 2020-on L5P or the 3.0L, which use different filters, and a twelve-pack is more than a one-off buyer needs. Match the number on your old filter, or confirm year and engine with Amazon’s fit checker, before ordering.
2. WIX 57202XP: Synthetic-Media Spin-On Oil Filter for 6.6L Duramax (2001-2014)

- Listing names 6.6L Duramax, 2001-2014
- 99% efficient at 23 microns (WIX figure)
- Rated for up to 20,000-mile intervals
- Synthetic-blend media, no wire backing
The WIX 57202XP is the XP version of the WIX filter for the 6.6L Duramax, and its listing names Chevrolet and GMC trucks with that engine from 2001 to 2014. That range covers the LB7, LLY, LBZ, LMM and most LML years. WIX also sells a standard 57202, but the XP line is the one built around synthetic oil.
WIX says the XP uses a synthetic-blended media mixed with natural fibers, which removes the need for a wire backing behind the pleats. The maker rates it at 99% efficiency at 23 microns, based on testing of a related XP filter, and says it can handle change intervals up to 20,000 miles. That number is a filter capability, not a recommendation; your oil life monitor and owner’s manual still decide when the oil comes out.
This is a good fit for owners of older Duramax trucks who run synthetic diesel oil, tow regularly or put on long highway miles. It is a single filter, so it suits one-truck households better than the twelve-pack above. The listing stops at 2014, so owners of later LML and early L5P trucks should check the fit checker carefully before ordering.

3. PPE MicroPure XR Ordnance: 5-Micron Oil Filter with Magnet for 6.6L Duramax (2001-2019)

- 5-micron filtration rating (PPE figure)
- 900 sq in of composite media
- Internal neodymium magnet
- TorqStop seal feature, 450 psi burst rating
Pacific Performance Engineering, usually shortened to PPE, builds parts aimed squarely at diesel pickups, and the MicroPure XR Ordnance is its premium oil filter for the 2001-2019 GM 6.6L Duramax. The listing names Silverado, Sierra and Savana applications and calls it a direct replacement.
PPE lists a long set of features. It rates the media at down to 5 microns and says the filter holds 900 square inches of it, a 150% increase over stock by its count. Inside is a neodymium magnet to catch fine steel, and the base plate is 50% thicker, with passages 47% larger. The bypass valve opens 10 psi higher than a stock filter, the silicone anti-drainback valve is reinforced, and the can is rated to a 450 psi burst pressure.
It suits owners who tow heavy, idle for long periods or simply want the most filter they can fit on an older Duramax. A higher bypass setting changes how the filter behaves on very cold, thick oil, so follow PPE’s guidance and your owner’s manual. It is not a reason to extend the oil change, and it does not fit 2020-on trucks or the 3.0L.
View PPE MicroPure XR on Amazon
4. PPE 114000750 Tall: 5-Micron Oil Filter for 2020-On 6.6L Duramax L5P (Replaces PF26)

- Listing names 2020+ 6.6L L5P
- 522 sq in of 5-micron media
- 49% larger oil passages
- Silicone anti-drainback valve and magnet
The PPE 114000750 is the tall version of PPE’s filter for the 2020-on GM 6.6L Duramax L5P, and the listing says it replaces the ACDelco PF26. PPE also sells a short version under a different part number, which matters on trucks where clearance or the factory filter size is different. Check the height of the filter on your truck, and the fit checker, before choosing between them.
According to the listing, the filter packs 522 square inches of 5-micron media around a perforated metal center core. The threaded plate is thicker, the oil passages are 49% larger, and the bypass valve uses a stiffer spring with a rubber seal. A silicone anti-drainback valve holds oil in the can at shutdown, and a magnet collects fine metal. PPE says it works with both synthetic and conventional oils.
This filter suits L5P owners who tow, plow or run long hours and want an aftermarket filter with more media than the stock part. It does not fit 2001-2019 trucks or the 3.0L, and it should still be changed on the schedule your oil life monitor sets.

5. Doc’s Diesel Oil Filter: PF26 Replacement for 2020-2026 6.6L Duramax

- Crosses ACDelco PF26 and GM 12684038
- Listing names 2020-2026 2500HD/3500HD
- 25 microns at 99% (third-party test)
- Synthetic media for any oil type
Doc’s Diesel sells filters made for diesel pickups, and this one is its replacement for the ACDelco PF26. The listing crosses it to GM 12684038, WIX WL10454 and Baldwin B7449, and names 2020-2026 Chevrolet and GMC Silverado and Sierra 2500HD and 3500HD trucks with the 6.6L Duramax, plus 2019-2024 Silverado 4500HD to 6500HD. It also says plainly that it does not fit 2001-2019 pickups.
The filter uses synthetic media rated for synthetic, conventional or blended oil. Doc’s quotes a 25-micron rating at 99% efficiency from third-party testing, and says the filter was tested for capacity and burst strength. It installs with no adapters, and the box holds a single filter, so you buy one per change rather than a case.
One useful detail is the listing’s own service advice: replace the filter at every oil change, and change at the short end of the interval when the truck tows, idles for long periods or makes short trips. That matches how a working diesel actually gets used. It suits L5P owners who want a filter built to the PF26 pattern rather than an oversized one. Confirm your engine with the fit checker first.
View Doc's Diesel 6.6L on Amazon
6. Doc’s Diesel Oil Filter: PF66 Replacement for 3.0L Duramax (2020-2026)

- Crosses ACDelco PF66 and GM 55495105
- Names Silverado/Sierra 1500 and SUVs
- 25 microns at 99% (third-party test)
- Single filter, no adapters
The 3.0L Duramax is a different engine from the 6.6L V8, and it takes a different, smaller filter. This Doc’s Diesel filter replaces the ACDelco PF66, and the listing crosses it to GM 55495105, WIX WL10351, Purolator L11424 and FRAM PH12447. Those crosses make it easy to check against your old filter.
The listing names 2020-2026 Silverado and Sierra 1500 trucks with the 3.0L Duramax, 2021-2026 Tahoe, Suburban, Yukon and Yukon XL, and 2021-2024 Cadillac Escalade and Escalade ESV with the same engine. It uses synthetic media rated for any oil type, with a 25-micron rating at 99% efficiency from third-party testing. Doc’s says the filter was also tested for capacity and burst strength, and the box holds one filter.
It suits owners of the half-ton diesel and the big diesel SUVs who change their own oil and want a filter that names the engine on the listing. As with the 6.6L version, the maker suggests changing at the short end of the interval under towing, idling or short trips. It does not fit any 6.6L engine, so confirm year, model and engine with the fit checker before you order.
View Doc's Diesel 3.0L on Amazon
Filter Number by Duramax Generation
Use this table to narrow the list, then check the number on your current filter. The years shown are the ones each listing names, not a complete fit list.
| Filter | Engine on the listing | Factory number it matches | Pack |
|---|---|---|---|
| ACDelco PF2232 | Part number only | PF2232 (88917036) | 12 filters |
| WIX 57202XP | 6.6L, 2001-2014 | PF2232 family | 1 filter |
| PPE MicroPure XR | 6.6L, 2001-2019 | PF2232 family | 1 filter |
| PPE 114000750 | 6.6L L5P, 2020 on | PF26 | 1 filter |
| Doc’s Diesel (6.6L) | 6.6L, 2020-2026 | PF26 (GM 12684038) | 1 filter |
| Doc’s Diesel (3.0L) | 3.0L, 2020-2026 | PF66 (GM 55495105) | 1 filter |
If two filters match your truck, decide by use. A factory or WIX filter suits a daily driver on a normal interval, while a heavier filter with a magnet appeals to owners who tow a lot. That is the short version of picking the best oil filter for Duramax engines.

Oil Change Habits for a Working Diesel
Most Duramax trucks have an oil life monitor that tracks how the engine is used, so follow it along with the owner’s manual. Towing, long idling and short winter trips use up oil faster, and our guide on how often to change oil explains when to come in early. Fill with a diesel oil that carries the specification in your manual; the American Petroleum Institute explains the API Engine Oil Quality Marks printed on licensed oils.
The fuel filter is a separate part on every Duramax, with its own water separator and its own interval. Changing the oil filter does nothing for it, so check the maintenance schedule and replace it when GM says.

West Michigan winters add their own load. Cold starts below freezing thicken the oil, and many diesel owners plug in a heater overnight; our list of the best engine block heater for diesel trucks covers the options. The right viscosity helps too, and our look at the best motor oil for cold weather explains the winter grades.
When the job is done, take the old oil and filter to a collection point, since the steel can can be recycled.
When to Hand the Truck to a Shop

A filter change is a fair DIY job on a 6.6L, but some signs call for a closer look. An oil pressure warning, oil on the filter adapter, a rising oil level (which can mean fuel or coolant getting in) or a check engine light deserve attention before the next tow. A scan tool is a good first step at home, and our guide to the best code reader for Duramax pickups covers the options.
If you would rather skip the drain pan, our oil change service in Creston handles diesel trucks along with cars. We can also check leaks and warning lights while it is in.
More Buying Guides
Frequently Asked Questions
Does the PF2232 fit an L5P Duramax?
It depends on the year. The PF2232 family is listed for 6.6L trucks through 2019, which includes the early L5P years. The 2020-on L5P uses a PF26-type filter, so check the number on your old filter before ordering.
What oil filter does the 3.0 Duramax use?
The 3.0L inline six uses a smaller filter from the PF66 family, GM number 55495105 on the cross-reference. It is not the same as any 6.6L filter, so buy one listed for the 3.0L engine and your exact model.
Are 5 micron aftermarket filters worth it on a Duramax?
They can suit trucks that tow often or see long idle hours, and many add a magnet and a heavier base. The micron figures come from the makers, though, and a factory-style filter changed on time protects the engine well.
Should I change the fuel filter with the oil filter?
Not necessarily. The fuel filter has its own interval in the GM maintenance schedule, so replace it when the schedule or the truck’s reminder calls for it, which may or may not line up with an oil change.
Rather keep your weekend free of drain pans and filter wrenches? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or schedule a diesel oil change through our contact page.
Is the truck on a job site until evening? Bring it to 456 Carrier St NE once the workday ends and leave it in our after-hours drop-off.
