456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Mopar, Delphi or MSD? Best Ignition Coils for Ram 5.7 HEMI Trucks

best ignition coils for ram: close-up of a PCB with sensors and tools

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A Ram with a dead coil usually tells you about it at idle first: a shake at a stoplight, a flashing check engine light, a P030 code pointing at one cylinder. The best ignition coils for Ram trucks with the 5.7 HEMI are the ones that match your truck’s coil generation, and that depends more on the model year than on the badge on the tailgate.

Below: how the HEMI fires its 16 plugs, how to choose a coil type, and six listings tied to the 5.7. For coils on other makes, our ignition coil brand guide compares the major suppliers.

Quick answer

Which ignition coil should go in a Ram 5.7 HEMI?

For most 2005-on trucks, the Mopar 68238603AA is the factory part, and Delphi GN10352 or Standard UF504 are solid single-coil swaps in the same family. ENA sells a budget set of eight. Early 2003 to 2005 trucks take a UF378-style coil instead. Confirm year and engine before ordering.

Our Quick Picks

Three coils that cover the factory repair, a full refresh and a performance build on the 5.7 HEMI.

Mopar 68238603AA product photo
Factory pick

Mopar 68238603AA

Genuine OEM, single coil

The Mopar part number for the later 5.7 HEMI coil.

SuitsOwners who want the dealer part
View on Amazon →
ENA Coil Set of 8 product photo
Value set

ENA Coil Set of 8

Set of 8, UF504 type

A full coil refresh for a high-mileage 5.7.

SuitsReplacing all eight at once
View on Amazon →
MSD Blaster 825583 product photo
Performance

MSD Blaster 825583

8-pack, black

A higher-output coil set for modified HEMI engines.

SuitsTuned or high-rpm trucks
View on Amazon →

How the 5.7 HEMI Fires Its Spark Plugs

The 5.7 HEMI is unusual in one way that matters here: it runs two spark plugs per cylinder, so a V8 carries 16 plugs but only eight coils. Each coil sits directly on top of one plug and feeds a second plug through a short spark plug wire. A worn wire or a cracked boot on that second lead can set the same misfire code as a failed coil.

Chrysler changed the coil design early in the engine’s life. Trucks from roughly 2003 to 2005 use a coil sold under the UF378 number in the aftermarket, while later trucks use the coil family Mopar listed as 56029129 and now supplies as 68238603AA. MSD notes on its Blaster HEMI coil page that a 2005 truck may need a visual check to tell which coil it has.

Pull one coil and read the label. A 56028394 number means the early style, while 56029129 or 68238603 means the later style found on most 5.7 trucks today.

Picking a Coil Type for Your Truck

Ram owners usually choose between four kinds of coil, and none of them fixes a misfire a coil didn’t cause.

  • Factory Mopar: the same part the dealer installs, the simplest choice when you want no guesswork.
  • Name-brand replacement: Delphi and Standard build coils to the original fit and connector, sold one at a time for single-cylinder repairs.
  • Value multi-pack: sets of eight from brands such as ENA make sense on a high-mileage truck getting a full refresh.
  • Performance coil: MSD’s HEMI sets suit modified engines more than stock ones.

Whatever you pick, match the part number on your old coil, check the connector shape, and run your year, cab and engine through the Amazon fit checker. Not every Ram has a HEMI, either: the 3.6L V6 uses a different coil, and the EcoDiesel has no spark ignition at all.

Best Ignition Coils for Ram: Six Listings Compared

Every pick below is a coil for the 5.7 HEMI, sorted from the factory part to performance and early-truck options. Treat the years in each description as the listing’s claim, and verify your own truck before you buy.

1. Mopar 68238603AA: Genuine OEM Direct-Fit Ignition Coil

Mopar 68238603AA product photo
Key features
  • Genuine Mopar OEM part
  • Part number 68238603AA
  • Direct fit, vehicle specific
  • Sold as a single coil

This is the genuine Chrysler coil sold under Mopar part number 68238603AA, the number that superseded the older 56029129 coils used on 2005-on HEMI engines. The listing describes it as a direct-fit, vehicle-specific OEM part, and it comes as a single coil rather than a set. It bolts into the same spot and plugs into the same connector as the coil you remove.

The main reason to choose it is certainty. A factory coil carries the same design, boot and connector the engine left the plant with, so there is no question about how it seats on the plug or how the short plug wire attaches. That matters on a truck still under a powertrain plan, or for owners who would simply rather not compare cross-reference charts. Buying one coil at a time also suits the common case of a single failed cylinder.

The listing does not name individual truck years, so read the label on your old coil or give your VIN to a parts counter before you order. It is not the right part for early 2003 to 2005 trucks with the 56028394-style coil, and it won’t fit the 3.6L V6. If you plan to replace all eight on a high-mileage engine, a multi-pack may be easier to source.

View Mopar 68238603AA on Amazon

2. Delphi GN10352: OE-Spec Coil Replacing 56029129 and 68238603AA

Delphi GN10352 product photo
Key features
  • Engineered to OE specifications
  • Controlled winding spacing
  • Vacuum-cast epoxy insulation
  • Endurance tested for common failures

Delphi has supplied original equipment to carmakers for decades, and its GN10352 is a single replacement coil whose listing names the Mopar numbers it replaces, including 56029129AA, 56029129AB, 56029129AF, 68060346AA and 68238603AA. Those are the coils used on most 2005-on 5.7 HEMI trucks, which makes the part number easy to check against the label on your old coil.

Delphi describes several build details aimed at long life. It controls the length of wire between adjacent windings to limit voltage stress on the insulation, uses wire coating chosen to resist cracks and pinholes, and vacuum-casts the epoxy to reduce air bubbles that can lead to energy punch-through. The coils are endurance tested against the stresses that usually cause failures, and the company says they are engineered to original equipment specifications.

For a Ram with one confirmed bad cylinder, this is a sensible middle ground between the dealer part and an unbranded multi-pack. Buying two or three lets you replace the failed coil and keep a spare in the glovebox. Note that Delphi’s own limited warranty does not cover Amazon purchases; the seller provides any warranty. It does not suit early UF378-style trucks.

View Delphi GN10352 on Amazon

serene curved road winding through lush green hills with distant views

3. Standard Motor Products UF504: Single Replacement Ignition Coil

Standard UF504 product photo
Key features
  • Standard Motor Products brand
  • Part number UF504
  • Single replacement coil
  • Cross-referenced to the 56029129 family

Standard Motor Products is a long-established American aftermarket supplier, and UF504 is its part number for the coil that other listings cross-reference to the Mopar 56029129 family. In the parts world, UF504 has become a kind of shorthand for the later 5.7 HEMI coil, so many multi-pack sellers quote it on their own boxes. This listing is the Standard-branded single coil itself.

The Amazon listing is short on detail and gives little more than the part number and package size, so the value here is the brand and the number. A single coil from a known supplier is a straightforward way to fix one cylinder without buying a full set. Since the UF504 number appears on many competing listings, it also makes it easy to compare like for like.

Before ordering, confirm your truck uses the UF504-style coil, either by the label on the coil you remove or through Amazon’s fit checker with your year, cab and engine. It is not the part for 2003 to 2005 trucks, which use the earlier UF378 design covered further down. If several cylinders are misfiring, diagnose the cause first, because multiple coils rarely fail at once without something else being wrong.

View Standard UF504 on Amazon

4. ENA Ignition Coil Pack Set of 8: UF504 Replacement for 5.7L HEMI

ENA Coil Set of 8 product photo
Key features
  • Set of 8 coil packs
  • Replaces UF504 and 56029129AA/AB/AF
  • Bolt-on, 3-terminal connector
  • 12-month warranty

ENA’s set covers all eight coils on the 5.7 HEMI in one box. The listing names 2011 to 2019 Ram 1500 trucks with the 5.7L V8, the 2019 Ram 1500 Classic, 2011 to 2018 Ram 2500 and 2012 to 2018 Ram 3500 with the 5.7L, along with HEMI-powered Chrysler, Dodge and Jeep models. It lists UF504, 56029129AA, 56029129AB, 56029129AF and 68060346AA among the numbers it replaces.

Each coil is a bolt-on unit with a three-terminal connector, and the set comes with a 12-month warranty from ENA. The obvious appeal is coverage: on a truck with well over 100,000 miles, replacing all eight at once means every cylinder gets a coil of the same age and design. It also removes the guesswork of which coil will fail next after you have already fixed one.

This is a value-focused set rather than an OE-brand part, so it suits owners comfortable trading some brand pedigree for full coverage. Enter your truck in the Amazon Garage on the listing to confirm fit, since the later 2019-on Ram 1500 body is not named. It is not for 2003 to 2005 trucks, and it does not include spark plugs or the short plug wires.

View ENA Coil Set of 8 on Amazon

top view of a craftsman organizing tools in a woodworking shop

5. MSD Blaster 825583: 8-Pack Performance Coils for 2005-2020 5.7L HEMI

MSD Blaster 825583 product photo
Key features
  • Fits 2005-2020 5.7L, 6.1L, 6.2L and 6.4L HEMI
  • Direct bolt-in to factory location
  • Plugs into factory connectors
  • Patented winding design

MSD is a long-running performance ignition brand, and the Blaster 825583 is its eight-coil set for Gen III HEMI engines. The listing names 2005 to 2020 5.7L, 6.1L, 6.2L and 6.4L HEMI engines. On its own product page, MSD lists a maximum output of 36,000 volts and a California Air Resources Board executive order (D-40-42), which makes it legal on emissions-controlled vehicles when installed per its application guide.

The coils bolt into the factory location and plug into the original connectors, so installation matches a standard coil swap. MSD credits its patented winding design and materials with improved high-rpm operation. That is where a hotter coil earns its keep: engines with a tune, a cam, higher compression or forced induction tend to need more spark energy at high revs than a stock truck asks for.

On a stock Ram used for commuting and towing, the difference over a factory-spec coil is likely small, so this set makes more sense as part of a build than as a misfire repair. MSD notes that 2005 applications may need a visual check to confirm which coil the engine uses. It does not fit early 2003 to 2005 UF378-style trucks.

View MSD Blaster 825583 on Amazon

6. Standard Motor Products UF378: Ignition Coil for Early 5.7L HEMI

Standard UF378 product photo
Key features
  • Standard Motor Products brand
  • Part number UF378
  • Single replacement coil
  • Early HEMI coil design

The first 5.7 HEMI Rams used a different coil from the later trucks, and UF378 is the Standard Motor Products number for that early design. Aftermarket UF378 listings name 2003 to 2005 Dodge Ram 1500, 2500 and 3500 trucks with the 5.7L V8, and cross-reference it to Mopar 56028394AB, 56028394AC and 56028394AD. This listing is the Standard-branded single coil.

Owners of these early trucks often find that most coil sets on Amazon are for the later UF504 style, which looks similar but is not interchangeable. Starting from the UF378 number avoids that mistake. As with Standard’s other coils, the Amazon listing gives little beyond the part number, so the reason to buy is a known brand making the correct part for an engine generation that cheaper sets often skip.

Pull one coil and check for a 56028394 number before ordering, since some 2005 trucks may have either style. On trucks this age, the short plug wires and the boots are often as tired as the coils, so inspect them while you are in there. It won’t fit 2006-on trucks, and if every cylinder is misfiring, look for a common cause before replacing parts.

View Standard UF378 on Amazon

Ram Coil Options Side by Side

Once you’ve read your coil’s label, the part family column rules each option in or out.

ListingPart familyTrucks the listing namesPack
Mopar 68238603AA68238603AA (later 5.7)Not named, confirm by VIN or label1
Delphi GN10352Replaces 56029129 and 68238603AANot named, confirm by part number1
Standard UF504UF504 (56029129 family)Not named, confirm by part number1
ENA coil setUF504 (56029129 family)2011-2019 Ram 1500 5.7L, 2500 and 3500 5.7L8
MSD Blaster 825583Performance, 2005-on HEMI2005-2020 5.7L HEMI8
Standard UF378UF378 (56028394 family)2003-2005 Ram 5.7L, per UF378 listings1
Best ignition coils for Ram trucks with the 5.7 HEMI, grouped by the coil family each listing replaces.

West Michigan weather is hard on the parts around the coils. A cold January start needs a strong spark, and road salt mist that works into a cracked boot or a loose plug wire gives the spark a path to ground instead of the plug. If a misfire only shows up on wet or frigid mornings, look closely at the boots and wires before replacing a coil.

tranquil rural scene featuring an empty road alongside a freshly plowed field under a clear blue sky

Replacing One Coil or All Eight

On a truck under about 100,000 miles with a single confirmed bad coil, one new coil is a reasonable repair. Past that, the other seven have seen the same heat cycles, and a full set can save a second repair a few months later. Stay with one brand and part number across the engine so every cylinder gets an even spark.

HEMI coils are easy to reach, so this is a common driveway job. With 16 plugs, check your owner’s manual for the interval, and if they’re due, replace plugs, short plug wires and coils in one visit.

close-up of robotics kit parts including wheels

Even the best ignition coils for Ram trucks fail early if moisture gets in, so add a thin film of dielectric grease inside each boot unless the coil maker says otherwise. Push every connector until it clicks, and route the plug wires away from the exhaust manifolds so heat doesn’t cook the insulation.

Make Sure It’s Really the Coil

A cylinder misfire code points to a cylinder, not a part. A worn plug, a bad plug wire, a clogged injector or a vacuum leak can all set it. The simple check is to swap the suspect coil with one from another cylinder, clear the code and drive: if the misfire follows the coil, you’ve found it.

serene countryside with a dirt road leading to a beautiful church amidst autumn foliage

The well-known HEMI tick is a different issue. A ticking or tapping noise, especially with a misfire that won’t move when you swap coils, can point to a lifter or camshaft problem that no coil will cure. A flashing check engine light means an active misfire that can overheat the catalytic converter, so our check engine light diagnostic in Grand Rapids is the safer next step than guessing at parts.

If the truck stumbles under throttle rather than shaking at idle, our article on why a car hesitates when accelerating covers the other causes. The 5.7 HEMI drives its camshaft with a chain, so a rattle at cold start deserves a look too; our timing belt and chain service in Grand Rapids handles both. For belt-driven engines elsewhere in your driveway, see our rundown of timing belt kit brands and what each kit includes.

Frequently Asked Questions

Are Mopar coils worth it on a 5.7 HEMI?

Mopar is the factory part, so it removes any doubt about fit and connector. A Delphi or Standard coil built for the same 56029129 family is a reasonable alternative when the part number matches your old coil.

What are the best ignition coils for a Ram 1500 5.7 HEMI?

For a 2009-on Ram 1500, start with the Mopar 68238603AA or a coil that replaces it, such as the Delphi GN10352 or Standard UF504. A set of eight from ENA suits a full refresh. Check the label on your old coil first.

Will MSD coils add power to a stock Ram?

MSD says its Blaster HEMI coils improve high-rpm operation, which matters most on modified or high-revving engines. On a stock truck driven normally, any change is likely small, so a factory-spec coil is the practical repair.

Why does a 5.7 HEMI have 16 spark plugs?

The HEMI uses two plugs per cylinder for a faster, more complete burn. Each of the eight coils fires one plug directly and the second through a short plug wire, so check those wires when chasing a misfire.

Got a Ram that still shakes after a new coil, or a code you can’t pin down? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or ask for a misfire diagnosis through our contact page.

If your shift runs into our hours, park the truck at 456 Carrier St NE in Grand Rapids and leave it with us through the after-hours drop-off.