As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
When a Honda or Acura V6 reaches its belt service, the parts counter usually narrows the choice to two boxes, and the gates vs aisin timing belt kit debate starts there. Both brands sell a complete kit for the same 3.0 to 3.7 liter J-series engine, both include the water pump, and both cost far less than a dealer kit.
This comparison lines up Aisin’s TKH-002 against Gates’ TCKWP329, then adds the Gates TCK329 for owners whose pump was replaced recently. Every spec here comes from the Amazon US listings. For the wider field of kit makers, our timing belt kit brand guide covers more engines and brands.
Quick answer
Should a Honda V6 get the Aisin or the Gates belt kit?
Pick the Aisin TKH-002 if you want parts from the same suppliers Honda uses and a printed fitment list. Pick the Gates TCKWP329 if you want a hydraulic tensioner and service bulletins in the box. Both include the water pump, so confirm your engine and buy from a trusted seller.
Our Quick Picks
Aisin's complete kit, its Gates rival with a pump, and a Gates parts kit for engines with a newer pump, all reviewed in full below.

Aisin TKH-002
Components from the same supplier names that build factory parts, with a printed fitment list.

Gates TCKWP329
Gates' complete kit with both tensioners, an idler and service bulletins in the box.

Gates TCK329
The Gates belt and tensioner hardware without paying for a second water pump.
Two Different Paths to the Same Belt Job
Aisin belongs to the Toyota group and builds water pumps and engine parts for carmakers. Its kits gather components from original equipment suppliers, so the belt, bearings and pump resemble what the engine carried from the factory. Aisin’s aftermarket division page describes the line as OEM-quality replacement parts for the global market.
Gates comes at the job from the other side. It is a belt specialist that engineers its own PowerGrip belts and packages them with tensioners, idlers and a pump to suit thousands of engines. The appeal is broad coverage and paperwork aimed at the technician, including notes on known trouble spots for each application.
Neither approach is wrong. The real differences sit in what each box contains, how clearly the listing states fitment, and whether you need the pump at all this time around.
Box Contents Side by Side
The table repeats only what each listing says. Where a listing stays silent, the cell says so instead of filling the gap with a guess.
| Item | Aisin TKH-002 | Gates TCKWP329 | Gates TCK329 |
|---|---|---|---|
| Timing belt | Yes, OE-matched | Yes, PowerGrip | Yes, PowerGrip |
| Water pump | Yes, diecast aluminum, carbon ceramic seal | Yes | No |
| Tensioner | Tensioner listed | Tensioner plus hydraulic tensioner | Tensioners and springs |
| Pulleys | Pulleys listed | One idler | Idlers |
| Gasket or seal | Pump gasket | Rubber seal ring and shim | Not listed |
| Paperwork | Installation instructions | Instructions and service bulletins | Instructions and service bulletins |
| Fitment in listing | Full year and model list | Not shown in the bullets | Not shown in the bullets |
Nothing in either listing mentions camshaft or crankshaft seals. If a seal is weeping oil onto the old belt, order it separately, because oil soaking a new belt shortens its life.
Gates vs Aisin Timing Belt Kit Options Reviewed
All three suit the Honda and Acura J-series V6. Enter your year, model and engine in Amazon’s fit checker before you order, since a few years and trims in this family use different parts.
AISIN TKH-002: Timing Belt Kit with Water Pump for Honda and Acura V6

- Water pump, belt, tensioner, pulleys and gasket
- OE-matched parts from Aisin, Mitsuboshi, Toyo, NTN
- Diecast aluminum pump with carbon ceramic seals
- Fitment listed for 2003-2018 Honda and Acura V6
Aisin’s TKH-002 bundles the parts that wear together on the Honda and Acura J-series V6 into one box: the water pump, timing belt, tensioner, pulleys, pump gasket and a set of installation instructions. Aisin calls the contents OE-matched and names the supplier brands inside, including Aisin, Mitsuboshi, Toyo and NTN, rather than generic house-brand pieces.
The pump is where Aisin puts its emphasis. The listing describes a diecast aluminum housing with carbon ceramic seals, and Aisin presents itself as a major original equipment pump maker. For an engine where the pump hides behind the timing covers, a durable seal matters, because a slow coolant weep there ruins the new belt and repeats the whole job.
Fitment is spelled out more clearly than on many kits. The listing covers the 2003-2017 Accord V6, 2005-2018 Odyssey and Pilot, 2006-2014 and 2017-2018 Ridgeline, 2010-2015 Crosstour, Acura MDX, RDX, RL, RLX, TL, TLX, TSX V6 and ZDX in stated years, plus the 2004-2007 Saturn Vue V6. Engine can still change fitment, so run your vehicle through the fit checker. The listing does not call its tensioner hydraulic, so inspect the old one before ordering.

Gates TCKWP329: PowerGrip Premium Timing Kit with Water Pump and Hydraulic Tensioner

- Belt, tensioner, hydraulic tensioner, idler, pump
- Rubber seal ring and shim included
- Instructions plus Technical Service Bulletins
- PowerGrip belt engineered by Gates
Gates sells the TCKWP329 as its complete PowerGrip Premium kit for the same Honda and Acura V6 family. The listing counts five main components: one belt, one tensioner, one hydraulic tensioner, one idler and one water pump, along with a rubber seal ring and a shim. Detailed installation instructions come in the box, and so do Technical Service Bulletins for applications with known trouble spots.
The hydraulic tensioner is the headline difference from the Aisin box. On this engine the original unit can lose oil or let its plunger sag with age, and a weak tensioner lets the belt slap or skip under load. Getting a new one in the same kit saves a separate order and keeps every tensioning part the same age.
Gates designs its own PowerGrip belts rather than sourcing an original-equipment belt, which suits owners who trust the brand’s long record in belts. The Amazon bullets do not include a year and model list, so enter your Accord, Odyssey, Pilot, Ridgeline or Acura details in the fit checker and match the 329 number before buying. Buy from a seller you trust, since copies of popular kits do turn up online.
Gates TCK329: PowerGrip Premium Timing Belt Component Kit Without Water Pump

- Belt, idlers, tensioners and tensioner springs
- No water pump, for engines with a newer pump
- Instructions and Technical Service Bulletins
- Replaces 95329K1, 95329K2 and TB329K1 kits
The TCK329 is the Gates component kit for the same 329 application, minus the water pump. Inside are the belt, idlers, tensioners, tensioner springs and supporting hardware, with installation instructions and the same Technical Service Bulletins Gates packs in its full kits. The listing shows it replacing several earlier part numbers, including 95329K1, 95329K2 and TB329K1.
This kit earns a place only in a specific situation. If the pump went in within the last few years and you have the invoice to prove it, renewing the belt and tensioning parts without a second pump keeps the job focused. Without that record, the pump stays original, and the full kits above make more sense on an engine where the pump hides behind the belt.
Check the old pump anyway once the covers are off. Look for crusty coolant trails at the weep hole, a gritty bearing when you spin the pulley, or wobble in the shaft. Any of those signs means you need a pump after all, so it pays to have one ready. As with the other kits, confirm year, model and engine in the fit checker before ordering.

Full Kit or Belt Parts Only?
On the Honda V6 the timing belt turns the water pump, and the pump sits behind the belt covers. Swapping one later means pulling the same covers, crank pulley and belt again. That is why most shops treat the pump as part of the belt job unless there is a clear record of a recent replacement.
A worn pump bearing or a weeping seal can also drip coolant onto a fresh belt. Coolant on the belt teeth wears them early, and on an interference engine a snapped belt lets pistons hit open valves. Our article on when to replace a timing belt explains the warning signs and why mileage is not the only trigger.

The pump-free TCK329 makes sense in a narrow case. If you have paperwork showing the pump went in within the last few years, perhaps after a leak, the component kit renews the wear items without paying for a second pump. Without that record, the kits with a pump are the safer buy, and our water pump brand roundup explains what separates a durable pump from a weak one.
Which Kit Fits Your Situation
Start with the pump history, then decide how much you value factory-style parts against extra hardware.
| Your situation | Better fit | Reason |
|---|---|---|
| Original pump, high miles, want near-factory parts | Aisin TKH-002 | OE-supplier belt, bearings and pump |
| Original hydraulic tensioner is leaking or sagging | Gates TCKWP329 | Hydraulic tensioner included |
| Pump replaced recently, with records | Gates TCK329 | Belt and tensioner parts without a pump |
| You want fitment printed in the listing | Aisin TKH-002 | Full year and model list shown |
| A technician doing the job wants the bulletins | Either Gates kit | Service bulletins packed in |
Whichever box you choose, buy from a seller you trust. Owners on enthusiast forums report counterfeit belt kits from unknown third-party sellers, so check that Amazon or the brand itself ships the order, and compare the box and part numbers against the listing photos when it arrives.
Fresh coolant goes in once the pump is installed. Honda engines expect a specific blue formula, and our guide to coolant for Honda engines explains which bottles match it and how to bleed air from the system afterward.

Winter Starts and the Belt Calendar
Rubber belts age with time as well as miles. A minivan that sits through a Grand Rapids winter, then makes short trips in the cold, can reach the age limit in your owner’s manual long before the odometer does. Honda’s maintenance minder flags the belt as service item 4, and your owner’s manual explains how it handles age as well as distance.
Cold starts also load the hydraulic tensioner, which relies on oil inside its body to keep tension steady. A tensioner that has lost fluid can let the belt flap for a moment at startup, which you may hear as a brief slap from the front of the engine. If your engine is a different design entirely, our explainer on timing belts and timing chains shows how to tell which one you have.
Leaving the Belt Job to a Technician
On a transverse V6 this is a long job with little room to work. The crank bolt is tight, the engine mount often has to come off, and the cam marks must line up exactly on both banks. One tooth off can mean poor running at best and bent valves at worst.

If you would rather not take that risk, our technicians handle timing belt replacement in Grand Rapids on foreign and domestic vehicles. While the covers are off, we look over the cam and crank seals and the old parts, so you know what else is worn.
More Buying Guides
Frequently Asked Questions
Is Aisin the original supplier for Honda timing parts?
Aisin says its TKH-002 uses OE-matched components from brands such as Aisin, Mitsuboshi, Toyo and NTN. That makes it a close match to factory parts, though Honda’s own boxed kit carries a Honda part number.
Does the Aisin kit include a hydraulic tensioner?
The Amazon listing names a tensioner but does not say hydraulic. The Gates TCKWP329 listing names a hydraulic tensioner in its parts count, so check the original unit for leaks or a sagging plunger before choosing.
Can I skip the water pump on a Honda V6 belt job?
Only if you know the pump was replaced recently. The belt drives the pump, so changing it later repeats most of the labor. The Gates TCK329 covers that case with belt and tensioner parts and no pump.
Will either kit fit a Toyota V6?
No. These part numbers are for the Honda and Acura V6 family. Aisin and Gates sell separate kits for Toyota belt engines, and many newer Toyota V6 engines use a timing chain instead.
Rather not spend a weekend lining up cam marks? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a timing belt appointment on our contact page.
Need to drop the car off after work? Our after-hours drop-off at 456 Carrier St NE, Grand Rapids, MI 49505 lets you leave it with the keys and a note about the job.
