As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A 2010-2012 Subaru Outback with worn front struts tends to announce itself. The nose keeps bobbing after a dip, the front tires start to cup, and the wagon wallows through every pothole on a March commute. Shop for replacements and two names keep surfacing, so this kyb vs fcs struts guide pins both brands to one corner of one car to keep the comparison fair.
Our reference is the driver-side front of the fourth-generation Outback wagon. We explain who each company is and what separates a loaded strut from a bare one, then review KYB’s Strut-Plus SR4385, FCS’s loaded 1333439L and FCS’s bare 333439L. If you drive something other than a Subaru, our roundup of shocks and struts for daily drivers covers a wider spread of cars.
Quick answer
Should your Outback get KYB or FCS front struts?
Pick KYB’s Strut-Plus if you want a loaded assembly built around a damper from a major OE supplier. Pick the FCS 1333439L if you want a loaded strut whose listing prints the 2010-2012 Outback years, from a maker that publishes its seal, oil and coating details. With clean springs, FCS’s bare strut also works.
Our Quick Picks
KYB's Strut-Plus and FCS's loaded strut for the same 2010-2012 Subaru Outback front left corner, plus FCS's bare strut as a closely related third pick. You will find a full review of each one further down the page.

KYB Strut-Plus SR4385
OE supplier's complete corner with an Excel-G strut and a matched spring.

FCS 1333439L
Michigan-based maker's complete unit with the model years printed on the listing.

FCS 333439L Bare Strut
The same FCS corner without the spring and mount, for cars with clean springs.
Who Builds KYB and Who Builds FCS
KYB is a Japanese company that supplies shock absorbers to vehicle makers and sells the same engineering as replacement parts. Its European arm states on its suspension safety page that one in five cars leaving production lines worldwide is fitted with KYB shock absorbers as standard. In the US, the Excel-G line covers bare struts and shocks, and Strut-Plus wraps an Excel-G strut into a full corner unit.
FCS Automotive is a ride control manufacturer with its corporate office in Madison Heights, Michigan. The company calls itself vertically integrated, says it employs more than 60 full-time engineers, and states that it designs and produces shocks and struts for several OE companies. It also claims the widest complete strut assembly coverage in the North American aftermarket, which helps explain why its parts turn up for so many older cars.
So the real gap is name recognition and published detail, not a factory brand set against a relabeled one. Both companies build their own dampers. KYB’s badge matters to anyone who wants the brand found on new cars, while FCS prints more of its component specs on its own product pages.
Loaded Corner or Bare Damper: Decide the Job First
Every part on this list is a MacPherson-style front strut, but the boxes hold very different amounts of hardware. A loaded strut, which KYB calls Strut-Plus and FCS calls a complete strut assembly, arrives with a new spring, upper mount and bearing already put together. A bare strut is the damper alone, so the spring and mount from your old strut have to be moved over.
On an Outback that has seen a decade of Michigan brine, the loaded option usually makes more sense. Old springs and mounts rust and harden, and a cracked coil is easy to miss until it lets go; our post on broken coil spring symptoms shows what to look for. Pulling a spring off also takes a compressor and real care, because a slipping tool can release a great deal of force at once.
A bare strut still earns its place when the springs were replaced recently or the car spent most of its life in a dry garage. It also suits owners who want to keep a specific spring, such as a factory part in sound shape. Just budget time for the teardown and a close look at the upper bearing while it is apart.
KYB vs FCS Struts for the 2010-2012 Outback Front Left
All three listings below cover the driver-side front corner of the 2010-2012 Outback wagon. Spring rates on this car can vary with engine, trim and transmission, so enter your full vehicle in Amazon’s fit checker before you order, and buy the matching right-side part for the other front corner.
KYB Strut-Plus SR4385: Complete Strut, Mount and Spring Assembly for Subaru Outback

- Strut, upper mount and coil spring in one unit
- Built on a KYB Excel-G strut with a stronger outer shell
- Application-engineered spring matched to the strut
- Listed for the Subaru Outback; confirm year and side
SR4385 belongs to KYB’s Strut-Plus line, the brand’s complete corner unit that arrives with the strut, upper mount and coil spring already assembled. KYB’s listing names the Subaru Outback but does not print a year range. Interchange lists on other Outback strut listings pair SR4385 with FCS 1333439L and Monroe 172687, which places it at the driver-side front of the 2010-2012 wagon.
Inside sits a KYB Excel-G strut, the same damper the company sells bare, here in what the listing calls a stronger steel outer shell with application-specific damping valves. The spring is engineered for this application and matched to the strut. KYB says it is meant to hold the designed ride height longer without giving up ride quality or control, and the unit comes pre-assembled for exact fitment.
This assembly suits an Outback owner who wants an OE supplier’s damper plus a fresh spring and mount in one box, with no compressor involved. It also makes a matched pair easy if the right side gets a KYB too. It is a weaker fit for anyone who wants the years printed on the listing, so run your trim, engine and transmission through Amazon’s fit checker first.
View KYB Strut-Plus SR4385 on Amazon

FCS 1333439L: Front Left Loaded Strut Assembly for 2010-2012 Subaru Outback Wagon

- Listed for the 2010-2012 Outback Wagon, front left
- Strut, spring, mount, bearing plate and boot pre-built
- No spring compressor needed to install
- Right-side partner is FCS 1333439R
The 1333439L is FCS’s loaded strut for the driver-side front of the Outback wagon, and unlike the KYB listing, its title states the years: 2010 through 2012. FCS designs and builds its own shocks and struts, and the company says it produces them for several carmakers as well. Its corporate office is in Madison Heights, Michigan.
According to FCS’s product page, a complete assembly ships with the spring, mount, bearing plate and boot already installed. The strut inside uses Freudenberg NOK seals, a mirror-finished hard-chrome piston rod, Eneos oil and a nitrogen gas charge, with valving calibrated for each application. FCS says its springs are checked for OE compression levels and given an electrostatic coating to resist corrosion.
This unit suits a driver who wants a loaded corner with the fitment spelled out and a supplier that publishes its component list. The passenger-side partner is 1333439R, so order both to keep the front axle even. It is less suited to anyone set on a carmaker supplier’s name, and the listing’s own bullets are thin, so check your trim and transmission in the fit checker before ordering.
FCS 333439L: Front Left Bare Strut for 2010-2012 Subaru Outback

- Listed for the 2010-2012 Subaru Outback, front left
- Damper only: reuse or replace the spring and mount
- Freudenberg NOK seals and hard-chrome rod (FCS spec)
- Nitrogen gas charge to limit fade
The 333439L is FCS’s bare strut for the same corner as the loaded 1333439L. Its listing title names the 2010-2012 Outback front left, and it ships as the damper alone. You keep your current spring, upper mount and bearing, or buy those separately, and move them across on the bench.
FCS lists the same core features for its bare struts as for its loaded ones: Freudenberg NOK seals, a hard-chrome piston rod, Eneos oil and a nitrogen gas charge to cut aeration and fade. Its product page is direct about the trade-off. A bare strut replaces only the damper, so it is meant for jobs where the spring and mount are reused or replaced on their own.
This option suits a home mechanic with a solid spring compressor, or an Outback whose springs and mounts were replaced recently and still look clean. It does not suit a wagon with rusty springs, torn boots or a noisy mount, because you would be bolting old parts onto a new damper. If you go this route, read our coil spring compressor guide before you start.
View FCS 333439L Bare Strut on Amazon

How the Three Parts Line Up
The table lays out the kyb vs fcs struts choice for this Outback corner using only what each listing and maker page states. Any detail a listing skips is marked as missing instead of guessed at.
| Point | KYB SR4385 | FCS 1333439L | FCS 333439L |
|---|---|---|---|
| Type | Loaded strut (Strut-Plus) | Loaded strut | Bare strut |
| Years on the listing | Not stated; Outback named | 2010-2012 Outback Wagon | 2010-2012 Outback |
| Spring and mount | Included, spring matched to the strut | Included, with bearing plate and boot | Reuse yours or buy separately |
| Damper details published | Excel-G strut, stronger outer shell | NOK seals, chrome rod, Eneos oil, nitrogen | Same FCS seal, rod, oil and gas specs |
| Spring compressor needed | No | No | Yes |
| Right-side partner | Separate SR number, confirm fit | 1333439R | Matching right part, confirm fit |
On paper, the two loaded units sit closer together than the brand names suggest. Each replaces the whole corner, each skips the compressor, and each claims a spring matched to the application. The deciding points are the paperwork you want to see and the name you want on the box.

Own a Forester, Crosstrek or WRX rather than an Outback? Our guide to shocks and struts for Subaru models lists bare and loaded options across several generations, including a KYB Excel-G strut for the Outback. It is a good place to cross-check part numbers before you settle on a brand.
Brine, Frost Heaves and an Aging Outback
Subaru wagons are everywhere in Grand Rapids for a reason, since all-wheel drive and decent ground clearance suit a West Michigan winter. The same winters are rough on struts. Road salt works into spring coatings and lower strut bolts, and freeze-thaw potholes pound the dampers every spring.
That makes the corrosion notes on each listing worth reading. FCS states that its springs get an electrostatic coating for corrosion resistance, while KYB’s SR4385 listing focuses on a spring designed to hold the intended ride height longer. Neither claim replaces a yearly look underneath, ideally once the salt trucks are parked for the season.

Potholes also leave damage that a new strut will not fix. A bent control arm, a torn ball joint boot or a cracked wheel can feel a lot like tired struts, and our article on signs of pothole damage walks through those checks. Rule them out before you spend money on a full front pair.
Fitting Tips and When to Hand It to a Mechanic
Replace front struts as an axle pair. KYB’s European safety page recommends changing shock absorbers in pairs and says a single worn unit can add up to 2 meters, roughly 6.5 feet, to stopping distance from 30 mph. A fresh loaded strut on one side and a tired one on the other also leaves the wagon uneven in turns and over bumps.
FCS’s own installation notes add a few habits worth copying. Check the left or right marking before the old strut comes off, finish every fastener with a torque wrench rather than an impact gun, and do the final tightening of the upper mount nuts with the car back on its wheels. Then book a wheel alignment, because a strut swap changes camber and caster.

Not every clunk from the front of an Outback is a strut. Our guide on how to tell if struts are bad covers the bounce test, leaks and cupped tires, and a squeak over speed bumps often comes from bushings or sway bar links instead, as our piece on why a car squeaks when going over bumps explains.
If the lower bolts are seized, a front tire is wearing on one edge, or you would rather not wrestle a strut out of the wheel well, our team handles suspension repair in Grand Rapids. Hendrick Hoffman, who owns the shop and leads the work in the bays, is certified by ASE and the State of Michigan in steering and suspension.
More Buying Guides
Frequently Asked Questions
Is FCS as good as KYB?
Both companies design and build their own dampers, and FCS says it also produces shocks and struts for several OE companies. KYB has the better-known name among carmakers. For the 2010-2012 Outback, the choice comes down to the listing details you want and how much an OE supplier’s badge matters to you.
Do the same points apply to kyb vs fcs shocks?
Mostly, yes. Both brands sell bare shocks as well as struts, and the trade-off stays the same: a big OE supplier’s name against a maker that prints more of its component specs. A shock does not carry the spring, so the loaded versus bare question does not come up.
Will I need a spring compressor for any of these three?
Not for the two loaded units. KYB’s Strut-Plus and the FCS 1333439L arrive with the spring and mount assembled, so each bolts in as one piece. The bare FCS 333439L does need a compressor, because your old spring and mount have to move onto it.
Does an Outback need an alignment after new front struts?
Yes, plan on one. FCS notes that strut replacement affects camber and caster, and the front strut bolts straight to the steering knuckle. An alignment protects the new tires and keeps the wagon tracking straight.
Outback nosing down hard at every stop sign, or front tires scalloping along the inside edge? Call 456 AutoFix at 616-279-3832, Monday to Friday from 8am to 5pm, or request a front strut inspection through our contact page.
Do your hours clash with ours? The after-hours drop-off at 456 Carrier St NE in Grand Rapids lets you leave the wagon whenever it suits your schedule.
