As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Mazda3 with worn front struts gets sloppy long before anything actually breaks. The kyb vs koni question tends to come up right about then, when the nose dives under braking, the car floats after highway seams and the steering loses some of its crisp feel. The two brands approach a replacement strut from opposite directions.
KYB builds dampers for carmakers and sells OE-style replacements meant to bring the factory ride back. Koni sells upgraded dampers, and its Special Active line uses a valve that changes damping on its own as the road changes. This guide keeps all the parts on one corner of one car, the front left of the 2014-2018 Mazda3, and adds KYB’s complete Strut-Plus assembly as a third option. For a wider look across many vehicles, see our roundup of shocks and struts for daily drivers.
Quick answer
Should a 2014-2018 Mazda3 get KYB or Koni front struts?
Choose the KYB Excel-G if you want the factory Mazda ride back and plan to reuse your springs and mounts. Choose the Koni Special Active if you want a calmer ride over broken pavement with firmer control in corners. Choose the KYB Strut-Plus if you would rather skip the spring compressor entirely.
Our Quick Picks
One KYB and one Koni front left strut for the same 2014-2018 Mazda3, plus KYB's complete Strut-Plus assembly as a related third pick for owners without a spring compressor. All three are reviewed in full below.

KYB Excel-G 338088
OE-grade strut tuned to bring back the stock Mazda ride.

Koni Special Active 8745-1336L
Self-adjusting valve eases small bumps and firms up in turns.

KYB Strut-Plus SR4511
Excel-G strut, new spring and mount in one ready-to-fit unit.
Two Brands, Two Goals for a Replacement Strut
KYB is a Japanese maker that supplies shock absorbers and struts to vehicle manufacturers, and its Excel-G range is sold as an OE-grade replacement. The Amazon listing for the Mazda3 part says it is calibrated to restore the car’s original handling and control. Put simply, the aim is to make a tired car feel the way it did when it was new, not to change its character.
Koni is a Dutch damper brand with a long motorsport history, widely known for shocks you can adjust. Its red Special Active line takes a different route from the yellow Sport line, because there is no knob to turn. Instead the damper uses what Koni calls Frequency Selective Damping, or FSD, which the listing says lets it adapt to various road conditions and driving styles.
What frequency selective damping means in practice
A conventional damper responds to how fast its piston moves, and the valving is a fixed compromise between comfort and control. An FSD damper adds a second valve circuit that reacts to how often the wheel is being pushed up and down. Quick, small inputs from cracked pavement get softer damping, while slower body motions such as a lane change or a dip in the highway get firmer damping.
On paper, that gives a ride that feels gentler over rough patches without letting the body roll or float more. KYB’s Excel-G uses conventional twin-tube gas valving tuned to match the original strut. Neither approach is wrong, since they simply aim at different drivers.
Why the Third-Generation Mazda3 Front Corner Works for This Test
The third-generation Mazda3, sold for the 2014 through 2018 model years, was the first to sit on Mazda’s own Skyactiv chassis rather than a shared Ford platform, according to the Mazda3 entry on Wikipedia. It came as a four-door sedan and a five-door hatchback, both with MacPherson strut front suspension. That makes the front strut a part nearly every owner of this car replaces sooner or later, and both brands make one for it.
The table below draws on the three Amazon US listings in this guide plus parts-retailer fit data. Treat it as a starting point, because listings word fit differently and trim levels can change the part.
| Detail | KYB Excel-G 338088 | Koni Special Active 8745-1336L | KYB Strut-Plus SR4511 |
|---|---|---|---|
| What you get | Bare twin-tube gas strut | Bare FSD damper | Complete unit with spring and mount |
| Damping | Fixed, tuned to stock | Changes on its own with road frequency | Fixed, Excel-G strut inside |
| Fit named in listing | Mazda 3, replaces BHP734900 and BHN234900A | Mazda III sedan and hatchback (BM/BN), front left | Mazda 3 (years not in the title) |
| Reuses your spring and mount | Yes | Yes | No, all new parts |
Each listing covers one corner only. The matching right-side parts are KYB 338087, Koni 8745-1336R and a separate right-hand Strut-Plus assembly, so check the side before anything goes in the cart.
KYB vs Koni: The Mazda3 Front Struts in Detail
All three parts below are for the front left corner of a 2014-2018 Mazda3, going by their listings and retailer fit tables. Before ordering, run your year, body style and engine through Amazon’s fit checker, and buy the matching right-side part so the axle stays even.
KYB Excel-G 338088: Twin-Tube Gas Front Left Strut for 2014-2018 Mazda 3

- OE-grade strut calibrated for the Mazda 3
- Replaces Mazda BHP734900 and BHN234900A
- Teflon banded piston, triple chrome rod
- Sintered iron rod guide to help hold alignment
The 338088 belongs to KYB’s Excel-G line, the company’s OE-grade replacement range, and its Amazon title lists Mazda numbers BHP734900 and BHN234900A along with the cross-reference 73016. Parts retailers place it at the front left of the 2014-2018 Mazda3, with KYB 338087 as the matching right side. It is a bare strut, so your factory spring, top mount and bearing move across from the old unit.
According to the listing, KYB calibrated this strut to restore the original handling and control of the Mazda 3. A seamless working cylinder pairs with a Teflon coated piston band for a positive seal, while a triple chrome plated rod and multi-lip oil seals are there to slow wear. A sintered iron rod guide is meant to help the strut hold correct wheel alignment over the years.
This strut suits a daily driver at stock height whose owner wants the car to ride the way it did new, without paying for an upgrade. It makes the most sense when your springs and mounts are still in good shape. It does not suit someone without a spring compressor or a shop to do the swap, and the listing names no warranty term, so check the box or with KYB.
View KYB Excel-G 338088 on Amazon

Koni Special Active 8745-1336L: FSD Front Left Damper for Mazda3 Sedan and Hatchback

- Front left damper for Mazda III sedan and hatchback (BM/BN)
- Frequency Selective Damping (FSD) valve
- Adapts to road conditions and driving style
- Matching right side is Koni 8745-1336R
The 8745-1336L is a front left damper from Koni’s red Special Active line, and its Amazon title names the Mazda III sedan and hatchback, model codes BM and BN, from 2013 to 2018. In the US those codes cover the 2014-2018 model years. A separate Koni listing for 8745-1336R covers the right front, so plan to buy both for a matched axle.
The listing calls it ready made for the Mazda III and highlights Frequency Selective Damping, which it says transforms to suit various road conditions and driving styles. In practice, FSD adds a valve circuit that softens damping during quick, small wheel movements and keeps it firm during slower body motions. There is no adjuster to set, which makes it a simpler upgrade than Koni’s adjustable Sport line.
This damper suits an owner who wants a smoother ride over cracked pavement and tighter control on curvy roads, all on the stock springs. Like the KYB Excel-G, it is a bare damper, so the factory spring and mount must be moved over with a compressor. It is an upgrade over an OE-style strut rather than a copy of one, and the listing gives no warranty term, so check Koni’s own paperwork.
View Koni Special Active 8745-1336L on Amazon
KYB Strut-Plus SR4511: Complete Front Left Strut Assembly with Spring and Mount for Mazda 3

- Pre-assembled strut, spring and mount for the Mazda 3
- Built around a KYB Excel-G strut
- Application-matched KYB coil spring
- No spring compressor needed to install
The third pick stays with KYB but changes the format. SR4511 is a Strut-Plus complete corner unit, and its listing says it is designed for proper ride height and original handling on the Mazda 3. The title does not give model years, but parts retailers list SR4511 for the front left of the 2014-2018 Mazda3, so confirm your car in the fit checker before ordering.
Inside the assembly is a KYB Excel-G strut with a stronger steel outer shell and application-specific damping valves, according to the listing. It comes with a KYB coil spring engineered to match the strut and hold ride height, plus a new mount, all pre-assembled at the factory. That means the corner gets fresh parts throughout, not just a new damper on an old, sagging spring.
This option suits a home mechanic who does not own a spring compressor, or a high-mileage car whose mounts and springs are tired. It gives the same factory-style ride as the bare Excel-G, so it is not a performance upgrade like the Koni. Buy the matching right-side assembly as well, and book an alignment once both corners are installed.
View KYB Strut-Plus SR4511 on Amazon

Matching the Strut to How Your Mazda3 Gets Driven
The right pick depends on your roads, your budget and how much wrenching you want to do. A commuter that only needs to stop bouncing has different needs from a hatchback that gets driven hard on back roads.
| How the car is used | Closer match | Why |
|---|---|---|
| Commuting, wants the stock feel back | KYB Excel-G | Tuned to the original ride |
| Rough city streets, wants a softer ride | Koni Special Active | FSD eases small, quick bumps |
| Spirited driving on stock springs | Koni Special Active | Firmer control of body roll |
| No spring compressor at home | KYB Strut-Plus | Bolts in as one complete unit |
| High mileage, tired mounts and springs | KYB Strut-Plus | Replaces every part of the corner |
On Mazda forums, owners who fit Special Actives often describe the ride as more settled than stock, while Excel-G owners tend to say the car simply feels new again. Those are opinions rather than measurements. Tires, pressures and worn bushings shape ride feel as much as the damper does.
Weighing other matchups too? Our KYB and Gabriel comparison on a CR-V looks at complete assemblies from both brands, and our KYB and Monroe strut test on a Camry stays in the OE-replacement tier.
Swapping a Front Strut on the Mazda3
The KYB Excel-G and the Koni are bare dampers, so the factory coil spring, top mount and bearing have to move from the old strut to the new one. That means compressing the spring, which stores enough energy to cause serious injury if a tool slips. Read our coil spring compressor guide before you try it, or choose the Strut-Plus, which arrives assembled.

Replace struts in pairs across the axle. A fresh Koni on the left and a worn original on the right will make the car pull and pitch unevenly under braking. While the corner is apart, look over the sway bar end link, the dust boot and the bump stop, since a split boot lets grit chew up the new rod seal.
A MacPherson strut helps set the wheel’s alignment, so book an alignment once the new parts are in. Skipping it can wear the front tires quickly and leave the steering wheel off center.
Grand Rapids Potholes and a Compact Sedan
West Michigan freeze-thaw cycles open fresh potholes every spring, and a compact car on low-profile tires feels each one through the front struts. Worn dampers let the wheel crash into the bump stop, which speeds up wear on mounts and tires. Road salt also crusts the lower strut bolts at the knuckle, so soak them with penetrating oil a day before the job.

For a Mazda3 that spends its winters on salted city streets, the Koni’s softer reaction to small, sharp hits is a genuine plus in the kyb vs koni decision. If the car mostly runs smooth highway miles, the KYB Excel-G restores the stock feel for less. Either way, rinse the underside after salt season and check the strut bodies for oily residue when you swap tires.
When the Problem Is More Than a Strut
Not sure the struts are to blame? Bounce, nose dive, leaking bodies and cupped tires are all explained in our guide on how to tell if struts are bad. A squeak or creak over speed bumps is often a dry sway bar bushing or a worn top mount instead, which our article on why a car squeaks when going over bumps explains.

Seized knuckle bolts, a clunk that stays after new struts or steering that wanders are good reasons to let a shop look first. Our team handles suspension repair in Grand Rapids on foreign and domestic vehicles, from strut swaps to the inspection that should come before one. Steering and suspension is one of the areas where Hendrick Hoffman, who runs the shop, holds both ASE and State of Michigan certification.
More Buying Guides
Frequently Asked Questions
Is KYB or Koni better for a Mazda3?
In the kyb vs koni choice, neither suits every driver. KYB’s Excel-G is built to restore the factory ride, while Koni’s Special Active uses frequency selective damping for a smoother ride with firmer body control. Pick the one that matches your roads and budget, and buy the part listed for your exact car.
Is the Koni Special Active adjustable?
Not by hand. It has no external knob like the yellow Koni Sport. Its FSD valve changes damping on its own in response to how quickly the wheel moves over the road, so there is nothing to set during installation.
Do I need a spring compressor for these struts?
For the KYB Excel-G 338088 and the Koni 8745-1336L, yes, because the factory spring and mount move to the new strut. The KYB Strut-Plus SR4511 comes assembled with a new spring and mount, so it bolts in as one unit.
Can I put Koni on one side and KYB on the other?
It is not a good idea. Different dampers on the same axle control each wheel differently, which can make the car pull under braking or feel uneven in turns. Fit the same part line on both front corners.
Mazda3 still bouncing or knocking after a strut swap? Give 456 AutoFix a call at 616-279-3832 between 8am and 5pm, Monday through Friday, or set up a suspension inspection on our contact page.
Busy during the workday? Our after-hours drop-off lets you leave the car at 456 Carrier St NE in Creston once your own day is done.
