As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A first-generation Miata is a simple car to service, and the oil change is the job most owners do themselves. The best oil filter for NA Miata engines is not exotic: it is a quality spin-on filter in the same small size Mazda fitted at the factory, with a valve that holds oil in a filter that mounts on its side.
Below we cover what the B6 1.6 and BP 1.8 engines need from a filter, then review six filters listed in that size. If you want the wider picture first, our guide to the best oil filter brand for everyday driving compares the major makers.
Quick answer
Which oil filter fits a 1990-1997 Miata?
Both NA engines take the small Mazda B6Y1-14-302A spin-on filter. Common equivalents are FRAM TG6607 and XG6607, WIX 51365XP, Mobil 1 M1-108A and PurolatorTECH TL14612. Pick one with a silicone anti-drainback valve, confirm fit by VIN, and change it on your owner’s manual schedule.
Our Quick Picks
Three ways in: the factory Mazda filter for an original car, a FRAM TG+ for regular driving and a PurolatorTECH whose listing names the Miata. All six filters are reviewed below.

Mazda B6Y1-14-302A
The Mazda-branded filter in the number parts listings tie to the NA engines.

FRAM TG+ TG6607P
FRAM's TG+ in the 6607 size, built for conventional or synthetic oil.

PurolatorTECH TL14612
A straightforward filter whose listing names the 1990-2005 Miata.
What a Small Roadster Engine Asks of Its Filter
The NA engine is a twin-cam four that likes to rev, and its filter is a compact can that threads onto the side of the block. Because it sits sideways rather than hanging straight down, oil can drain out of it after you switch the engine off. A healthy anti-drainback valve keeps that oil in place, so pressure builds quickly on the next start.
When you compare boxes, these are the details that matter on a Miata:
- Anti-drainback valve: silicone stays flexible through hot summers and cold starts better than basic nitrile rubber, which suits a sideways filter.
- Media: synthetic or synthetic-blend media holds more dirt before it loads up, which helps if you run longer synthetic oil intervals.
- Bypass valve: it lets oil around a clogged element so the engine isn’t starved. Stick with the listed size so the valve setting matches the original.
- Grip and gasket: the filter is tucked low on the block, so a textured can or a lubricated gasket makes removal less of a fight.
A box that promises 15,000 or 20,000 miles describes the filter’s capacity, not your engine’s schedule. Your interval comes from the owner’s manual and how you drive, and our article on how often to change oil explains normal and severe service.
One Filter Number for the 1.6 and the 1.8
The first Miata launched with a 1.6-liter engine, and Mazda’s own MX-5 chronology records the 1.8-liter engine joining the range in July 1993. In the US that change arrived with the 1994 model year. Parts listings show both engines taking the same small spin-on filter, sold by Mazda as part number B6Y1-14-302A.
Several aftermarket listings cross that Mazda number to FRAM PH6607, WIX 51365 and Mobil 1 M1-108A, and some list the same size for the NB (1999-2005) and ND (2016 onward) generations too. Those cross references come from the listings, so treat them as a starting point. Enter your year and engine in the Amazon fit checker and confirm against your VIN or the filter already on the car.
Best Oil Filter for NA Miata Engines: Six Filters in Detail
Each listing below names one filter number in the NA size. Check that number against your car before you order, since a single listing never covers every vehicle.
1. Genuine Mazda B6Y1-14-302A: OEM Spin-On Oil Filter

- Genuine Mazda part
- OEM factory filter, not aftermarket
- Listed as an exact fit
- B6Y1-14-302A part number
This is the Mazda-branded filter in part number B6Y1-14-302A, the number that aftermarket cross references point back to when they list the NA Miata size. The listing describes it as a genuine OEM factory part rather than an aftermarket copy, and as an exact fit for the vehicles that call for this number.
The main reason to choose it is simplicity. If you keep a first-generation car close to how it left the factory, or you keep service records for a future sale, a Mazda part on the block removes any question about whether a cross reference was right. It also gives you a baseline: if you later switch to an aftermarket filter, you know what size and shape the original was, which helps when you compare boxes at a parts counter.
The listing is short on detail. It doesn’t describe the media, the anti-drainback valve material or a mileage rating, so if those specifications matter to you, one of the aftermarket filters below states more. As with every pick here, run your year and engine through the Amazon fit checker and confirm by VIN before ordering, and change it on the schedule your owner’s manual gives rather than any figure on a box.
View Mazda B6Y1-14-302A on Amazon
2. FRAM TG+ TG6607P: Spin-On Oil Filter with Silicone Valve for 15K-Mile Intervals

- Synthetic fiber and cellulose blend
- Silicone non-drain back valve
- 99% filtration efficiency per listing
- SureGrip non-slip can
The TG6607P is FRAM’s TG+ filter in the 6607 size, the FRAM number that listings cross to the Mazda B6Y1-14-302A. FRAM describes the TG+ line for drivers who push their cars in stop-and-go traffic, towing or extreme weather, and for owners of high mileage vehicles. It works with conventional or synthetic motor oil.
Inside, the listing describes a synthetic fiber and cellulose blend that raises both dirt-trapping and dirt-holding capacity, with a stated 99% filtration efficiency. The non-drain back valve is silicone, which FRAM says gives up to three times the hot oil resistance of its comparison valve. On a Miata, where the filter sits sideways on the block, a valve that stays flexible is a sensible feature. The SureGrip texture on the can also helps when you are reaching up from under a low car with oily hands.
The title mentions change intervals lasting up to 15,000 miles, and the listing says the filter meets all manufacturers’ recommended intervals. Treat the mileage as capacity, not a schedule. The listing doesn’t print a vehicle list, so enter your year, model and engine in the Amazon fit checker and confirm the fit by VIN before buying.
View FRAM TG+ TG6607P on Amazon

3. WIX XP 51365XP: Spin-On Oil Filter Built for Synthetic Oil

- Designed for synthetic motor oil
- Synthetic-blend media with natural fibers
- Up to 20,000-mile intervals per listing
- Fit checker note on the listing
The 51365XP is the XP version of WIX’s 51365, a number that cross references tie to the Mazda B6Y1-14-302A size. WIX’s XP line is built around synthetic motor oil, and the listing describes it for severe conditions such as towing, stop-and-go traffic and long highway runs.
The media is a synthetic blend with natural fibers, which WIX says removes the need for wire backing. The listing quotes 99% efficiency at 23 microns, though it notes that figure is based on a different XP filter, the 51515XP. WIX also says the XP outperforms OE standards and supports change intervals of up to 20,000 miles for synthetic oil users. If you run full synthetic in your NA and change it once or twice a season, this is a filter designed with that oil in mind.
Pay attention to fit here. The listing title names Mazda applications from 1997 onward, so owners of earlier NA cars should check the part finder carefully, and the listing itself asks buyers to verify fitment by entering vehicle details. Confirm by VIN, and keep to the interval in your owner’s manual even if the filter is rated for more.
4. Mobil 1 M1-108A: Extended Performance Oil Filter with Synthetic Blend Media

- Synthetic blend media
- Up to 25,000-mile protection per title
- Withstands 9x normal operating pressure
- Lower oil flow resistance per listing
The M1-108A is Mobil 1’s Extended Performance filter in the size that listings cross to the Mazda B6Y1-14-302A. If you already run Mobil 1 oil in your Miata, it is the matching filter from the same brand, though any quality filter in the right size works with any oil that meets your manual’s specification.
The listing describes media containing synthetic fibers that help keep oil clean, and says the filter removes more contaminants than conventional filters while reducing resistance to oil flow. Mobil 1 also states that the can withstands up to nine times normal system operating pressure. The title quotes protection for up to 25,000 miles, which is the longest rating among the filters here and is aimed at extended synthetic oil changes.
That rating is about what the filter can hold, not a reason to stretch the interval on a 30-year-old engine. Most NA owners change oil far sooner than that, simply because the car sits through winter. The listing doesn’t publish a vehicle list or a valve material, so use the Amazon fit checker for your year and engine and confirm by VIN before you order. If you want a stated silicone valve, the FRAM filters list one.
View Mobil 1 M1-108A on Amazon

5. FRAM Ultra Synthetic XG6607P: 20K-Mile Oil Filter with Dual-Layer Media

- Dual-layer synthetic media
- Silicone anti-drainback valve
- High nitrile gasket
- SureGrip non-slip surface
The XG6607P is FRAM’s Ultra Synthetic filter in the 6607 size, one step above the TG+ and aimed squarely at synthetic oil changes. The listing describes it as reliable for high mileage use and quotes protection for up to 20,000 miles.
FRAM lists a dual-layer pleated media with 99% or better filtration efficiency, a silicone anti-drainback valve with up to three times the hot oil resistance of its comparison valve, and a high nitrile gasket for heat resistance. It also mentions a precision coil spring with a glass-fiber-reinforced nylon poppet in the valve assembly. For a sideways filter that sees heat from a hard summer drive and long cold soaks in storage, that combination of silicone valve and sturdy gasket is a reasonable fit.
The SureGrip surface helps both when you spin it on and when you take it off, and FRAM’s instructions are simple: thread it on until the gasket reaches the base, then tighten by hand as the box directs. It is more filter than you need if you change conventional oil every spring and fall. Confirm the number for your car with the Amazon fit checker and your VIN first.
View FRAM Ultra Synthetic XG6607P on Amazon
6. PurolatorTECH TL14612: Spin-On Oil Filter with Anti-Drainback Valve

- Listing names Miata 1990-2005
- Captures over 96.5% of dirt
- Anti-drainback valve
- Metal end caps and rugged internals
The TL14612 is the PurolatorTECH filter in Purolator’s 14612 size, and it is the one listing here that names the car directly: its compatible vehicles include the Mazda Miata from 1990 to 2005, which covers every NA year and the NB generation. That makes it an easy starting point if you want a filter whose listing spells out the fit.
Purolator describes it as dependable filtration across a normal interval, typically around 5,000 miles depending on your vehicle and oil, with expanded dirt-holding capacity that captures over 96.5% of dirt. An anti-drainback valve is there to prevent dry starts after the car has been sitting, which matters on a roadster that might stay parked for a week or a whole winter. Wear-resistant metal end caps and rugged internal construction round out the build.
The listing says it is made to tighten by hand without special tools, and the gasket is described as a strong rubber seal. It is a basic, no-frills filter rather than one built for long synthetic intervals, so it suits owners who change oil on a regular, shorter schedule. Even with Miata named on the listing, confirm by VIN before you buy.
View PurolatorTECH TL14612 on Amazon
Matching a Filter to How You Drive the Car
Every filter here is the same size, so choosing the best oil filter for NA Miata use comes down to media, valve and how long you plan to run each change.
| Filter | Media (per listing) | Valve (per listing) | Good match for |
|---|---|---|---|
| Mazda B6Y1-14-302A | Factory OEM part | Factory design | Owners keeping the car original |
| FRAM TG+ TG6607P | Synthetic fiber and cellulose blend | Silicone | Daily drivers and hot summer use |
| WIX XP 51365XP | Synthetic-blend with natural fibers | Not stated | Synthetic oil on longer intervals |
| Mobil 1 M1-108A | Synthetic blend | Anti-drainback valve | Mobil 1 oil users |
| FRAM Ultra XG6607P | Dual-layer synthetic | Silicone | Long synthetic changes |
| PurolatorTECH TL14612 | High-capacity media | Anti-drainback valve | Regular 5,000-mile changes |
If you change oil every spring and fall with conventional oil, a basic filter does the job. If you run full synthetic and stretch the interval, pick one built for synthetic oil and still follow the manual.

Summer Roadster, Michigan Winter Storage
Plenty of NA Miatas in West Michigan spend November to April under a cover. Old oil carries acids and moisture from short trips, so changing the oil and filter before storage means the engine sits in clean oil all winter. In storage terms, the best oil filter for NA Miata cars is simply a fresh one with a good valve, ready for the first start in spring.
If you drive yours year-round, cold starts are the hard part. Thick oil moves slowly at start-up, and the sideways filter is where a worn valve shows up as a few seconds of noise. Our roundup of the best motor oil for cold weather covers grades, though your owner’s manual still sets the viscosity range.

A low car also makes the job awkward on a flat driveway. Our guide to car ramps for low cars covers ramps with a shallow approach angle, so the front lip clears before the tires climb.
When the Oil Change Turns Up Something Else
A filter can’t fix a leaking cam seal, a weeping valve cover gasket or an oil pressure gauge that drops at idle. On a car that is 30 years old, those are worth checking every time it is up in the air.

If you find fresh oil on the subframe, a filter that keeps working loose or metal glitter in the drained oil, have the car looked at before it goes back into storage. Our oil change service in Creston fits the filter your engine calls for, and we look for leaks while the car is on the lift.
More Buying Guides
Frequently Asked Questions
Do the 1.6 and 1.8 NA Miata engines use the same oil filter?
Yes. Parts listings show the B6 1.6 and the BP 1.8 sharing the Mazda B6Y1-14-302A spin-on filter, which aftermarket listings cross to the PH6607 size. Still confirm the number for your car by VIN before you buy.
What is the best oil filter for NB Miata and ND Miata cars?
Several listings, including PurolatorTECH TL14612 and Bosch 3300, name the same filter size for NB Miatas, and some also list later ND years. Engines and model years vary, so use the Amazon fit checker with your exact year and engine and confirm by VIN.
Is the genuine Mazda filter better than an aftermarket one?
It is the factory part, which makes it the safe choice for an original car. Quality aftermarket filters in the same size, such as FRAM, WIX or Mobil 1, are built to the same fit and add features like synthetic media or a textured can.
Should I change the oil filter before winter storage?
Yes, change the oil and filter together before the car goes into storage. Used oil holds moisture and acids, and fresh oil gives the engine a cleaner place to sit until spring.
Rather let someone else crawl under your Miata? Give our Creston shop a call at 616-279-3832 any weekday from 8am to 5pm, or send us a request through the contact page.
Can’t get away during work hours? Leave the car with us at 456 Carrier St NE using after-hours drop-off, and tape a note to the keys telling us what it needs.
