As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Ram owners who change their own oil tend to learn the same lesson once: the filter that slid on easily at the last service can feel welded in place the next time. The best oil filter wrench for Ram trucks depends less on the badge on the tailgate and more on the engine, because a HEMI, a Pentastar and a Cummins each hold their filter a different way.
Below we explain the three filter styles, how cap, jaw, strap and plier tools grip, and then review five tools matched to those engines. If you work on several makes, our general guide to the best oil filter wrench for everyday cars and trucks covers the wider field.
Quick answer
Which oil filter wrench fits my Ram?
Match the tool to the engine. A 6.7 Cummins from 2007 to 2023 takes a 93mm, 15-flute cap such as the EVRBUL. A 5.7 HEMI spin-on suits an adjustable three-jaw wrench like the WORKPRO. A 3.6 Pentastar needs a low-profile socket for its housing cap, often 24mm.
Our Quick Picks
Three starting points, one per Ram filter style: a cap for the Cummins spin-on, a three-jaw wrench for HEMI cans and a low-profile socket for the Pentastar cartridge cap. All five tools are reviewed below.

EVRBUL 93mm Cummins Cap Wrench
A cup wrench cut for the Mopar 05083285AA-size diesel filter.

WORKPRO Three-Jaw Filter Wrench
Self-adjusting jaws that close on the can as you turn.

STEELMAN 24mm Low-Profile Socket
A short socket for canister caps with a 24mm hex.
Three Engines, Three Filter Styles
Ram’s Ram 1500 model page lists the 3.6L Pentastar V6, the 3.0L Hurricane six and the 5.7L HEMI V8, and the heavy-duty trucks add the 6.7L Cummins diesel. Each engine family mounts its oil filter differently, and that decides which wrench is worth buying.
- 5.7 HEMI V8: a conventional spin-on can low on the block. Several brands make it, and the can size changed around the 2013 model year, so an adjustable tool covers more ground than a fixed cap.
- 3.6 Pentastar V6: a paper element inside a housing on top of the engine, closed by a cap. You turn the cap with a socket, not the filter itself.
- 6.7 Cummins: a large spin-on can on 2007 to 2024 trucks, with a fluted end that accepts a cap wrench. The 2025-on trucks moved to a cartridge filter.
The quickest way to check is to look at the filter already on the engine. Our roundups of the oil filters that suit each Ram 1500 engine and the filters made for the 6.7 Cummins show the part numbers, which also tell you the size of can your wrench has to hold.
Cap, Jaws, Strap or Pliers: How the Tools Differ
Every filter tool has one job: grip a smooth, oily cylinder well enough to break it loose. On a lifted pickup, also picture how much swing room your filter leaves for a handle.
- Cap wrench: a cup that fits the fluted end of one filter size. It grips evenly and works with a ratchet, but only on filters whose end matches exactly.
- Three-jaw wrench: self-adjusting jaws that close on the side of the can. One tool covers a range of sizes and brands.
- Strap wrench: a band that tightens as you turn. It is gentle on the can and good for large diesel filters.
- Filter pliers: toothed jaws that bite through a stuck can. They are a last resort for removal, not a tool for installing.
Best Oil Filter Wrench for Ram: Five Tools by Engine
Each tool below is one specific Amazon listing, and the sizes and fit notes come from that listing. Measure your filter or count its flutes and check your year, model and engine before you buy.
1. EVRBUL 93mm 15-Flute Cap Wrench: CNC Aluminum Tool for Ram 2500 and 3500 Cummins Filters

- 93mm cup with 15 flutes
- Listed for 2007-2023 Ram 2500/3500 6.7L
- Anodized 6061 aluminum body
- 1/2-inch drive or 26mm hex
EVRBUL’s cap wrench is a cup-style tool machined to match the closed end of a 93mm, 15-flute oil filter, the size its listing links to the Mopar 05083285AA spin-on. The fit list names the Ram 2500 and 3500 with the 6.7L turbo diesel from 2007 through 2023, along with 5.9L trucks from 2001 to 2008, which makes it the most truck-specific tool on this page.
The body is CNC-cut 6061 aluminum with an anodized surface that the maker says helps it resist corrosion and wear. You can turn it with a 1/2-inch ratchet, or put a 26mm socket or wrench on the outer hex when a straight pull is awkward. Because the cup engages every flute at once, it spreads the load evenly around the end of the can instead of squeezing one side, so the filter is far less likely to collapse halfway off.
This tool suits owners who change the oil on a diesel Ram at home and want a match for the factory filter. It does nothing for gas trucks, and the 2025-on Cummins moved to a cartridge filter, so it will not help there either. Count the flutes on your replacement filter and confirm your model year before you order.
View EVRBUL 93mm Cummins Cap Wrench on Amazon
2. WORKPRO Adjustable Three-Jaw Oil Filter Wrench: 2-3/8 to 3-3/4 Inch Range with Magnetic Body

- Fits 60 to 95mm filters
- Three rotating drop-forged jaws
- 3/8-inch drive or 5/8-inch wrench
- Magnetic body holds it on the can
This WORKPRO tool uses three rotating jaws that tighten around the filter as you turn the drive, and its listing gives a range of 2-3/8 to 3-3/4 inches, or 60 to 95mm. That span takes in the spin-on cans used on 5.7 HEMI trucks, so you do not need a separate cap for every filter brand you might buy over the life of the truck.
The jaws are drop-forged steel, and the head accepts a 3/8-inch square drive or a 5/8-inch wrench or socket. A magnet in the body helps the wrench stay on the filter while you line up a ratchet and extension, which is handy when you are reaching up past the front crossmember of a pickup. Since the jaws grip the side of the can rather than its end, filter length and flute pattern do not matter.
Choose this one if you drive a HEMI Ram, buy whichever quality filter is on the shelf, or service another car at home with a different filter size. It will not turn a cartridge cap such as the Pentastar housing, and a can that was badly over-tightened may still call for a strap or pliers. Check that there is room for a ratchet at the filter before you count on it.
View WORKPRO Three-Jaw Filter Wrench on Amazon

3. STEELMAN 24mm Low-Profile Oil Filter Socket: 3/8-Inch Drive for Canister Filter Caps

- 24mm 6-point opening
- 1.5-inch low-profile height
- Chrome vanadium steel, black phosphate finish
- Listed for Chrysler, Jeep, Dodge and more
A Ram 1500 with the 3.6L Pentastar V6 does not use a spin-on can. The filter is a paper element inside a housing on top of the engine, closed by a cap, so the right tool is a socket rather than a gripping wrench. STEELMAN lists this 24mm socket for oil and fuel filter caps on canister-type filters, naming Chrysler, Jeep, Dodge, Chevrolet and BMW among the makes.
It stands 1.5 inches tall, a low profile meant for caps tucked between hoses, brackets and the intake. The body is chrome vanadium steel with a black phosphate coating against corrosion, and it fits any 3/8-inch drive ratchet or torque wrench. A torque wrench is worth using here, because a plastic housing cap can crack if it is tightened by feel, and a cracked cap means an oil leak on top of the engine.
This socket suits Pentastar owners who want the cap off cleanly without chewing it up with pliers. Many of these caps carry a 24mm hex, but check yours with a socket set before you order, since a different cap or engine may need another size. It does nothing for a HEMI or Cummins spin-on, so treat it as the V6 owner’s tool and follow the cap torque listed in your service information.
View STEELMAN 24mm Low-Profile Socket on Amazon
4. NEIKO 03422A 12-Inch Oil Filter Pliers: Three Positions for 2-3/8 to 4-1/2 Inch Filters

- 12-inch adjustable pliers
- Three preset jaw positions
- Range 60 to 102mm per listing
- Non-slip ergonomic handles
Adjustable filter pliers are the backup many owners reach for when a cap or band will not bite. The NEIKO 03422A is a 12-inch pair with three preset jaw positions, and its listing gives a working range of 2-3/8 to 4-1/2 inches, or 60 to 102mm. On a mixed Ram driveway, that range covers a HEMI can and should also reach the larger diesel spin-on, though you should measure your filter to be sure.
The jaws have teeth that dig into the filter body, and the handles carry a non-slip grip with a black anodized finish. Because the pliers bite into the can, they still work when a filter is dented, oily or stuck from too much torque at the last change. Expect the old filter to be crushed and possibly punctured, so set a drain pan underneath before you squeeze and turn.
These suit owners who want one fallback tool for trucks, a car and outdoor equipment. They are a removal tool first rather than an installer, since a new filter only needs hand-tight plus the turn printed on its box. The long handles also need swing room, which is limited on some engine layouts, and they do not fit cartridge housing caps on the Pentastar or other engines.
View NEIKO 03422A Filter Pliers on Amazon

5. WORKPRO Nylon Strap Oil Filter Wrench: 1/2-Inch Drive for Filters up to 6 Inches

- Fits filters up to 6 in. (150mm)
- Adjustable nylon strap
- 1/2-inch square drive
- Drop-forged steel body
A strap wrench is the gentlest way to grip a large filter, and this WORKPRO model loops an adjustable nylon strap around the can, with a drop-forged steel body that takes a 1/2-inch square drive. The listing rates it for filters up to 6 inches, or 150mm, across and notes that it is not intended for small filters, so it leans toward the bigger cans found on heavy-duty trucks.
As you turn the drive, the strap pulls tighter, which gives more grip the harder the filter resists. Nylon does not crush the can the way pliers do, so this tool can also hold a new filter while you snug it down by hand. A 1/2-inch drive lets you add a breaker bar or a long extension when the filter sits deep behind the front axle and steering parts on a 2500 or 3500.
It suits Cummins owners who want a backup to a cap wrench, or anyone who services both a diesel truck and a tractor or generator with large filters. Because it is not made for small cans, a HEMI owner is better served by the three-jaw wrench above. Wipe the filter dry before you wrap it, since oil on the surface makes any strap slip.
View WORKPRO Nylon Strap Wrench on Amazon
Matching the Tool to Your Truck
Start with the engine, then pick a backup for the day the main tool slips.
| Your Ram | Filter style | Main tool | Backup tool |
|---|---|---|---|
| 1500 with 5.7 HEMI | Spin-on can | WORKPRO three-jaw wrench | NEIKO 03422A pliers |
| 1500 with 3.6 Pentastar | Cartridge in a capped housing | STEELMAN 24mm socket (check cap size) | Matching socket in your existing set |
| 2500 or 3500 with 6.7 Cummins, 2007-2023 | Large spin-on, 93mm 15-flute end | EVRBUL cap wrench | WORKPRO nylon strap wrench |
| Cummins 2025-on, Hurricane or EcoDiesel | Varies by engine | Check the owner’s manual first | Ask a parts counter by VIN |
The wrench is only half of a good oil change. Use the grade printed on the filler cap, and see our guide to motor oil choices for Ram trucks if you are unsure which viscosity your engine calls for.

Cold Garages, Salted Undercarriages and Stuck Filters
West Michigan winters are hard on the bottom of a truck. Road salt and slush coat the filter and its base, and a can that has sat through a few freeze-thaw cycles can rust lightly at the seam and grip harder than it should. Wipe the can clean and dry before you put any tool on it, because grime and oil are what make straps and jaws slip.
Cold oil also drains slowly. Run the engine for a few minutes so the oil is warm but not scalding, then let it settle before you open the drain plug. If you change your own oil through the winter, our guide to the best motor oil for cold weather explains how low-temperature grades help on frozen mornings.

Most stuck filters were over-tightened at the last change rather than seized by the weather. Oil the new gasket lightly, spin the filter on until it touches, then add the turn printed on the box. For a Pentastar cap, use a torque wrench and the figure in your service information instead of guessing.
Lift the truck safely before you crawl underneath. A jack rated for the weight and a pair of stands matter more than any filter tool, and our roundup of the floor jacks sized for Ram pickups covers both half-ton and heavy-duty trucks.
When to Let a Shop Handle the Oil Change
Some filters fight back no matter which tool you use. If a can tears apart and leaves its base plate on the engine, or a plastic Pentastar cap cracks while you turn it, stop there rather than forcing it. A damaged filter base or housing can leak badly once the engine is running.

Timing matters too. Our article on how often to change oil explains the normal and severe schedules, and towing, plowing and short winter trips usually count as severe. If the oil light flickers after a change, read about an oil pressure light that stays on before you drive far.
When you would rather skip the crawl under the truck, our oil change service in Creston fits the correct filter for your engine and takes a look for leaks around the filter base and oil pan while the truck is in the air.
More Buying Guides
Frequently Asked Questions
What size cap wrench fits a 6.7 Cummins oil filter?
Cap wrenches sold for the 2007 to 2023 Cummins Rams, such as the EVRBUL, are 93mm with 15 flutes to match the Mopar 05083285AA filter. The 2025-on trucks use a cartridge filter, so check your model year before buying a cap.
Do I need a special tool for the Pentastar oil filter?
You need a socket that fits the housing cap rather than a filter wrench. Many caps take a 24mm socket, and a low-profile one helps in the tight space on top of the engine. Check your cap size before you order.
Why does a cap wrench slip on my HEMI filter?
Filter brands do not all use the same end shape, so a cap that fits one can may be loose on another. An adjustable three-jaw or strap wrench grips the side of the can and works across brands.
Should I use the wrench to tighten the new filter?
Usually not. Oil the gasket, spin the filter on by hand until it seats, then add the turn printed on the box. A wrench makes it easy to over-tighten, which is why the next change gets hard.
Prefer to hand the truck over? Phone our Creston shop on 616-279-3832 any weekday from 8am to 5pm, or request a time on our contact page.
If your workday runs past closing, leave the Ram in the after-hours drop-off at 456 Carrier St NE, Grand Rapids, with a note saying it is due for oil.
