456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

64mm Cap, 14 Flutes: Finding the Best Oil Filter Wrench for Toyota

best oil filter wrench for toyota: tranquil rural landscape with fields and power lines under a clear blue sky

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Crawl under a late-model Camry, RAV4 or Tundra and you will not find a metal filter can. You will find a plastic housing cap with flutes around its edge, and a strap wrench or pliers can crack it. The best oil filter wrench for Toyota owners is a cap-style cup that matches those flutes and turns the cap without biting into it.

Below we explain which filter layout your Toyota uses, what separates a good cap wrench from a poor one, and then review five tools. For band, jaw and plier-style tools that suit metal canisters, see our general oil filter wrench guide.

Quick answer

What size oil filter wrench does a Toyota take?

Most Toyota and Lexus cartridge housings take a 64 to 65 mm cap wrench with 14 flutes. The Motivx MX2320 is listed for caps from 1.8L to 5.7L, the Lisle 61040 is a forged steel alternative, and the 1.8L Corolla and Prius housing suits a 6-slot tool such as the AUPREX.

Our Quick Picks

Three quick picks: an all-round Toyota cap wrench, a forged steel cup and a tool for the 1.8L Corolla and Prius housing. All five are reviewed below.

Motivx MX2320 product photo
All-round pick

Motivx MX2320

64.3 mm · 14 flutes · 3/8 in or 24 mm

One machined cup listed for Toyota cartridge caps from 1.8L to 5.7L.

SuitsHouseholds with more than one Toyota or Lexus
View on Amazon →
Lisle 61040 product photo
Forged steel

Lisle 61040

65 mm · 14 flutes · chrome-plated steel

A heavy forged cup from Lisle for stubborn Toyota and Lexus caps.

SuitsCaps that were tightened too hard last time
View on Amazon →
AUPREX 6-Slot 64mm product photo
1.8L Corolla and Prius

AUPREX 6-Slot 64mm

64 mm · 14 flutes · 6 slots

A dedicated cap tool for the 1.8L housing found on many small Toyotas.

SuitsCorolla, Prius and Matrix owners
View on Amazon →

Which Filter Setup Does Your Toyota Use?

Recent Toyotas use one of three filter layouts, and each one calls for a slightly different tool. Knowing which one sits under your car saves a second trip to the parts counter.

  • Larger cartridge housing: many four-cylinder, V6 and V8 engines, including many found in the Camry, Highlander and Tundra, use a paper element inside a housing with a fluted plastic cap and a small drain plug in its center.
  • 1.8L housing: the Corolla, Prius and Matrix with the 1.8L engine use a cartridge housing whose cap has slots around the edge, and a slotted tool grips it more securely.
  • Spin-on can: some engines, including several older trucks, still take a conventional spin-on filter with a fluted end that a 14-flute cup can also grip.

Your owner’s manual shows the filter type and service steps, and you can look it up free on Toyota’s owner’s manuals page. If you still need the filter itself, our guide to the best oil filter for Toyota engines covers the cartridge elements.

What Makes a Toyota Cap Wrench Worth Owning

These tools look nearly identical in photos, but small differences decide whether the cap comes off cleanly. Check these points against each listing:

  • Size and flute count: makers list Toyota cups at 64 mm, 64.3 mm or 65 mm, all with 14 flutes. A loose cup slips and rounds the cap, so match the listing to your cap.
  • How it grips: some cups push on the small tabs of the cap, which can crack them. Notch-less or rib-engaging designs spread the load across the flutes.
  • Material: machined aluminum is light and gentle on plastic. Forged steel will not spread on a cap that fights back.
  • Drive options: a 3/8-inch square plus a hex for a socket or spanner helps when a crossmember limits your swing.

Draining the housing matters too. On cartridge caps with a center plug, a drain tool lets the trapped oil run out before the cap loosens, which keeps the mess off the skid plate.

Best Oil Filter Wrench for Toyota: Five Cap Tools Up Close

Each listing gives a size, so compare it with your cap or filter before you order. Fit can change between model years and engines, so confirm yours on Amazon first.

1. Motivx Tools MX2320: 64mm 14-Flute Aluminum Wrench for Toyota Cartridge Caps

Motivx MX2320 product photo
Key features
  • 64.3 mm cup with 14 flutes
  • Listed for Toyota and Lexus caps, 1.8L to 5.7L
  • Notch-less grip that avoids the cap tabs
  • 3/8-inch drive or 24 mm socket, made in USA

The Motivx Tools MX2320 is a cap-style filter wrench machined for Toyota and Lexus cartridge housings. Its cup measures 64.3 mm across 14 flutes, and Motivx lists it for the plastic housing caps on engines from 1.8L up to 5.7L. That range takes in the Camry, RAV4, Highlander, Tacoma, Tundra, 4Runner, Corolla and Prius. Many older wrenches suit only the small 1.8L cap or only the larger V6 and V8 caps, so one cup that covers both is the main appeal here.

This second-generation version uses what Motivx calls a notch-less design. It grips the fluted part of the cap instead of pushing on the small tabs, which the maker says keeps those tabs from cracking and causing a leak. The listing also names Toyota spin-on filters it fits, including 90915-YZZF1, 90915-YZZN1 and 90915-10009, plus some 14-flute spin-on filters from other brands.

The body is 6061-T6 aluminum and the red drive hub is harder 7075-T6 aluminum. You can turn it with a 3/8-inch ratchet or extension, or slip a 24 mm socket over the hub. It is made in the USA with a lifetime warranty from Motivx. Aluminum is light and kind to plastic caps, but for a cap someone overtightened badly, a forged steel cup is the tougher tool.

View Motivx MX2320 on Amazon

2. Lisle 61040 End Cap Wrench: 65mm 14-Flute Forged Steel for Toyota and Lexus

Lisle 61040 product photo
Key features
  • 65 mm cup with 14 flutes
  • Forged steel with bright chrome plating
  • Engages ribs and flutes on V6 and V8 caps
  • Also listed for 1.8L, 2.5L and some 2.7L engines

The Lisle 61040 is a forged steel end cap wrench that Lisle makes specifically for Toyota and Lexus cartridge filter housings. The cup measures 65 mm with 14 flutes, and Lisle describes it as fitting all 65 mm, 14-flute Toyota and Lexus cartridge caps. The steel is finished in bright chrome, which resists rust and wipes clean after an oily job.

How it grips depends on the engine. On six and eight cylinder engines such as the V6 in a Highlander or the V8 in a Tundra, the wrench engages both the ribs and the flutes on the housing cap, spreading the load across more of the plastic. Lisle says it also works on 1.8L, 2.5L and some 2.7L four-cylinder engines, where it catches the flutes alone. That covers a large share of the Camry, RAV4 and Corolla models on the road.

The main reason to choose forged steel over aluminum is strength. A steel cup will not spread or round out when a cap fights back, so it suits owners who buy used vehicles with an unknown service history. It is heavier than the machined aluminum tools here. Check the listing photos for the drive size before you order, so you have the right ratchet on hand.

View Lisle 61040 on Amazon

serene forest road surrounded by tall pine trees and vibrant foliage

3. AUPREX 64mm 6-Slot Oil Filter Wrench: Aluminum Cap Tool for Toyota 1.8L Engines

AUPREX 6-Slot 64mm product photo
Key features
  • 64 mm with 14 flutes and 6 slots
  • Listed for 2009-2017 Corolla and 2010-2017 Prius
  • Forged 6061-T5 aluminum
  • Turns with a 27 mm spanner or 3/8-inch drive

The AUPREX 6-Slot is built for one job: the oil filter housing cap on Toyota’s 1.8L four-cylinder engines. AUPREX lists it for the 2009-2017 Corolla, 2009-2013 Matrix, 2010-2017 Prius, 2012-2017 Prius V and 2017-2018 Prius Prime, along with the 2011-2017 Lexus CT200h and some Scion models. If your car is on that list, a dedicated tool like this removes the guesswork.

The cup measures 64 mm with 14 flutes, and six slots around the bottom edge lock onto the matching features on the cap so the tool is less likely to slip. That extra hold matters on these engines, where the cap can be awkward to reach and you may be working at an angle. You can drive it with a 3/8-inch ratchet or a 27 mm spanner on the hex.

The body is forged from 6061-T5 aluminum, which keeps it light and reduces the chance of marring a plastic cap. The tradeoff is range: AUPREX designs this one around the 1.8L housing, so it is not the tool for a Camry, Tacoma or Highlander with a larger engine. Pair it with a general 64 mm cap wrench if you keep a mixed Toyota household.

View AUPREX 6-Slot 64mm on Amazon

4. Motivx Tools Toyota Oil Filter Wrench and Drain Tool Set: MX2320 Cap Wrench Plus MX2341

Motivx Wrench and Drain Tool Set product photo
Key features
  • MX2320 cap wrench plus MX2341 drain tool
  • For 2.0L to 5.7L cartridge filter engines
  • Drains the housing before the cap comes off
  • Set listing says not for spin-on filters

This Motivx Tools bundle pairs the MX2320 cap wrench with the MX2341 oil filter drain tool. Motivx sells it for Toyota and Lexus engines from 2.0L to 5.7L that use the cartridge style filter system. The listing names many late-model Sienna, Tundra, Highlander, Camry, RAV4, Tacoma, Sequoia, Avalon, Corolla, FJ Cruiser and Venza vehicles. Confirm your engine on Amazon before buying, since filter layouts changed across model years.

The drain tool is the reason to choose the set over the wrench alone. On these housings, a small drain plug sits in the center of the cap. You remove that plug, push the drain tool into the opening and let the oil trapped in the housing run into your pan before you unscrew the cap. That keeps most of the oil off your hands, the skid plate and the garage floor.

Once the housing is empty, the MX2320 wrench removes the cap itself, with the same notch-less grip described in the single wrench above. The set listing says these tools are meant for cartridge systems and do not work on standard spin-on filters. If you already own a cap wrench, check whether your filter kit came with a drain fitting before you buy the bundle.

View Motivx Wrench and Drain Tool Set on Amazon

tools arranged in a jewelry workshop

5. CTA Tools 2485 Heavy Duty Oil Filter Cap Wrench: 64mm 14-Flute with Square and Hex Drive

CTA Tools 2485 product photo
Key features
  • 64 mm cup with 14 flutes
  • Extra-thick wall construction
  • Combination square and hex drive
  • Built for higher torque loads

The CTA Tools 2485 is a heavy-duty cap wrench sized at 64 mm with 14 flutes. CTA lists it for 64 mm oil filters on Toyota and specific other vehicles, which makes it a practical fit for many Toyota cartridge caps and some spin-on filters with the same end shape. The heavy-duty build points it toward frequent use, whether in a home garage or a busy shop.

Its selling point is the extra-thick wall. A thin stamped cup can flex or spread when a cap is stuck, and once it starts to slip, it can chew the flutes off the cap. The thicker wall on the 2485 is meant to hold its shape at higher torque, so the force goes into turning the cap instead of deforming the tool.

It has a combination square and hex drive, so you can use a ratchet on the square or a wrench or socket on the hex when there is little room to swing a handle. That flexibility helps under a truck such as a Tundra, where the housing can be tucked behind a crossmember. The listing does not name model years, so confirm the 64 mm, 14-flute size against your filter or cap before you order.

View CTA Tools 2485 on Amazon

The Five Toyota Wrenches Compared

Here is how the five tools line up on the details that matter most when you are under the car with a ratchet in hand.

ToolListed sizeBuildGood match for
Motivx MX232064.3 mm, 14 flutesMachined aluminumToyota caps from 1.8L to 5.7L
Lisle 6104065 mm, 14 flutesForged chrome steelV6 and V8 caps that are tight
AUPREX 6-Slot64 mm, 14 flutes, 6 slotsForged aluminum1.8L Corolla, Prius and Matrix
Motivx setWrench plus drain toolAluminumDraining 2.0L to 5.7L housings first
CTA Tools 248564 mm, 14 flutesThick-walled steel cupSquare or hex drive in tight spaces
Toyota oil filter cap wrenches compared by listed size, build and the job each one suits.

If you own a Camry, Tacoma or RAV4 with a larger engine and one 1.8L Corolla or Prius, the Motivx MX2320 alone may cover both caps, according to its listing. A household of only newer V6 and V8 trucks can lean toward a steel cup like the Lisle or the thick-walled CTA.

serene countryside pathway flanked by fields and trees on an overcast autumn day

Whichever tool you pick, use it only to break the cap loose and to snug it back down. Spin the cap the rest of the way by hand so you can feel the threads catch correctly.

Changing Toyota Oil in a Grand Rapids Winter

Cold oil drains slowly, and a cartridge housing holds a pocket of it. In January, run the engine for a few minutes first so the oil flows, then let it sit long enough that the housing is warm rather than hot. Your manual sets the change interval, and our article on how often to change oil explains why short trips and cold starts count as severe use.

Plastic caps also get more brittle in the cold. Seat the wrench fully on the flutes, keep the ratchet square to the cap and pull steadily instead of jerking it.

tranquil aerial shot of a fog-covered highway at dawn

Replace the O-ring on the cap at every change and coat it with a film of fresh oil. Tighten the cap to the torque in your repair information, not by feel. For refill oil suited to our winters, see our picks for the best motor oil for cold weather, and if you would rather pull oil from the top, compare tools in our fluid extractor guide.

Cracked Cap or Stuck Housing: Time for a Shop

A cap wrench solves most removals, but some situations call for a lift and an experienced hand. Stop and get help if the cap is cracked, the flutes have rounded off, the housing threads feel rough, or you find oil weeping around the cap after a change.

winding asphalt road through lush countryside with clear blue skies and fluffy clouds

A leaking housing can empty the engine of oil far faster than most owners expect, so do not keep driving on it. Our oil change service in Creston handles cartridge housings, cap seals and drain plugs on foreign and domestic vehicles, Toyotas included.

Frequently Asked Questions

Is a Toyota oil filter wrench 64 mm or 65 mm?

Makers list Toyota cap wrenches at 64 mm, 64.3 mm or 65 mm, all with 14 flutes. Motivx lists its 64.3 mm cup and Lisle lists its 65 mm cup for the same Toyota and Lexus cartridge caps, so follow the listing that names your engine.

What is the best oil filter wrench for Toyota Camry models?

For a Camry with a cartridge housing, a 14-flute cap wrench such as the Motivx MX2320 or Lisle 61040 fits the cap, according to their listings. The Motivx set adds a drain tool for emptying the housing first. Confirm your engine and model year on Amazon before ordering.

Does a Tacoma need a different oil filter wrench?

It depends on the engine and year. Some Tacomas use a cartridge housing and others a spin-on filter. The Motivx MX2320 listing names Toyota spin-on filters 90915-YZZF1 and 90915-YZZN1 as well as cartridge caps, so check which filter your truck takes first.

Why did my Toyota filter cap crack?

Usually the cap was overtightened, gripped with pliers or a strap wrench, or turned with a cup that pushed on its tabs. A properly sized cap wrench, a fresh O-ring and the correct torque help prevent it. A cracked cap should be replaced, not reused.

Rather leave the housing cap and the old oil to someone else? Phone our shop on 616-279-3832 on a weekday between 8am and 5pm, or request an oil change appointment online.

Working late? Leave your Toyota in our after-hours drop-off at 456 Carrier St NE, Grand Rapids, and we will take it from there.