As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Cold starts, a heater blower on high, a light bar, a trailer or a plow pump all pull current a pickup’s alternator has to replace. When the battery light comes on or the headlights pulse at idle, the best alternators for trucks are the ones built for your exact engine and rated for the work you put the truck through.
This guide covers six specific listings for the F-150, Silverado and Sierra, Tundra, Tacoma and the 6.7L Super Duty, plus one high-output unit for GM trucks that carry a plow. For a brand-by-brand overview that covers cars as well, read our guide to choosing an alternator brand.
Quick answer
Which alternator should you put in your truck?
Start with a unit that names your truck, engine and years, and match or exceed the factory amp rating. Bosch, DB Electrical and AISIN all list direct-fit truck units. For a plow or heavy accessory load on a GM truck, a high-output unit such as the Mechman 400A is worth a look. Confirm fit by VIN.
Our Quick Picks
Three quick picks: a new Bosch unit for the 2010-2014 F-150, a 220 amp DB Electrical unit for 2014-2019 Silverado trucks and a 400 amp Mechman for GM pickups that push snow. All six listings are reviewed below.

Bosch AL7679N Alternator
A new Bosch unit for the earlier F-150 generation.

DB Electrical Silverado Alternator
A high-rated stock replacement for later Silverado trucks.

Mechman 400A High Output Alternator
A high-output unit for GM pickups with heavy accessory loads.
Why Truck Alternators Are a Separate Purchase
A truck alternator looks like any other, but the details rarely carry over from a car. Full-size pickups often leave the factory with 150 to 220 amp units, larger pulleys with more grooves and heavier output studs. Diesel trucks add glow plug or grid heater loads on cold mornings, and some Super Duty diesels carry two alternators.
The same truck can also use different units by engine and build date. A 2.7L Tacoma and a 3.5L Tacoma do not share an alternator, and a 2014 Silverado can differ from a 2019 model. So the fit checker matters more than the brand on the box.
Five Checks Before You Order
- OE or Lester number: match the number on the old case to the listing.
- Amp rating: stay at or above the original. A lower rating can leave the battery short in winter.
- Pulley grooves and rotation: the groove count must match your belt.
- Regulator type: many late-model GM, Ford and Toyota trucks let the engine computer control charging, so the plug and regulator must suit that system.
- New or remanufactured: both work when built well.
Make sure the alternator is the real fault first. A loose belt, a corroded ground strap or a weak battery can look the same from the driver’s seat, and our rundown of bad alternator symptoms helps you narrow it down.
Best Alternators for Trucks: Six Listings by Model
Each pick below is tied to named trucks and years from its listing. Use those names as a starting point, then confirm year, model and engine on Amazon before buying, because one listing never fits every version of a truck.
1. Bosch AL7679N: 200A New Alternator for Ford F-150

- 100% new components, not remanufactured
- 200 amp rating
- Listed for the 2010-2014 Ford F-150
- Replaces OE part number BL3Z10346B
The Bosch AL7679N is a 100% new alternator, built from new components rather than a rebuilt core. The listing names the 2010 to 2014 Ford F-150 and gives a 200 amp rating, and it replaces Ford part number BL3Z10346B. Bosch describes the unit as identical in fit and function to the original part, so it should take the factory mounts, belt and plug on a matching truck.
Bosch says these units are built and fully tested for high heat and high electrical demand, which suits a half-ton pickup that tows, runs a light bar or sits in winter traffic with the blower and heated seats on. A new core also removes the guesswork about how many miles a rebuilt housing and bearings have already seen, which appeals to owners who plan to keep the truck for years.
The F-150 in these years came with several engines, and Bosch notes that trim level and engine can change the fit. Check the number on your old alternator against BL3Z10346B, then confirm year, model and engine on Amazon’s fit checker or with your VIN. If your truck is a 2015 or later model, this unit is not the one to choose.
View Bosch AL7679N Alternator on Amazon
2. DB Electrical 400-52490: 220A Alternator for Silverado 1500 and 2500 HD

- 220 amp, 12 volt, clockwise rotation
- Silverado 1500 2014-2018 and 1500 Legacy 2019
- Silverado 2500 HD and 3500 HD 2015-2019
- Replaces GM 23487089 and 84143539, Lester 14020
DB Electrical lists this 100% new aftermarket alternator for a wide span of later GM trucks: the 2014 to 2018 Silverado 1500, the 2019 Silverado 1500 Legacy, the 2015 to 2019 Silverado 2500 HD and 3500 HD, and 2016 to 2019 Express vans. It is a 12 volt, 220 amp unit in the Denso SC hairpin family, with clockwise rotation, an internal regulator and fan, and a six-groove pulley.
The cross-reference list is long and useful. It replaces GM numbers 22949466, 23487089 and 84143539, Denso 104210-6860 and Lester 14020, so you can compare it directly with the label on your old unit. The 220 amp rating gives heavy-duty owners some margin for a plow harness, work lights or an inverter without moving to a performance unit. For a stock truck, it simply restores the factory charging rate with room to spare.
These trucks use engine-computer charging control, so the plug and regulator must match the original, which is why the OE numbers matter here. The listing does not cover the redesigned 2019 Silverado 1500 or later trucks, and the Sierra fit is not spelled out in the bullets. Confirm year, model, engine and the current part number with your VIN before you order.
View DB Electrical Silverado Alternator on Amazon

3. DB Electrical 400-52393: 150A Alternator for Toyota Tundra and Sequoia 4.6L and 5.7L

- 150 amp, 12 volt unit
- Tundra 2007-2018 and Sequoia 2008-2018
- Also lists the Lexus GX460 2010-2018
- Cross-references Lester 11352 and Denso 104210-5090
This DB Electrical alternator is listed for the 2007 to 2018 Toyota Tundra, the 2008 to 2018 Sequoia and the 2010 to 2018 Lexus GX460, and the title names the 4.6L and 5.7L V8 engines. It is a 100% new aftermarket unit rated at 150 amps and 12 volts and listed in the Denso SC hairpin family.
The listing cross-references Lester 11352 and 11765, Denso 104210-2830 and 104210-5090, and several Bosch, ACDelco and Arrowhead numbers. That makes it easy to check against the label on the old case. It also prints mounting ear sizes, which helps when you want to confirm the bolt pattern before the truck is on the lift. The unit is listed as built to OEM specifications for routine repair or replacement, whether at home or in a shop.
A 150 amp unit covers the factory load of a V8 Tundra that tows a camper or carries a few extra lights. If you have added a large audio system, a winch or a plow, look at your total load before assuming a stock-rated unit is enough. The 4.0L V6 Tundra is not named in this listing, so confirm year, model and engine with your VIN first.
View DB Electrical Tundra Alternator on Amazon
4. DB Electrical 400-52730R: 175A Alternator for Ford Super Duty 6.7L Diesel

- 175 amp, 12 volt, clockwise rotation
- F-250 and F-350 Super Duty 6.7L, 2017-2019
- Internal regulator and internal fan, 8-groove pulley
- Replaces Denso 104211-0490, Ford GL8823, Lester 21939
DB Electrical lists this alternator for the 2017 to 2019 Ford F-250 and F-350 Super Duty with the 6.7L diesel. It is a 12 volt, 175 amp unit with clockwise rotation, an internal regulator and internal fan, and an eight-groove pulley set up for the factory belt. It replaces Denso 104211-0490, Ford GL8823 and Lester 21939, so the label on your old unit should point you to the right match.
A diesel pickup works its charging system hard. Cold mornings bring heavy starting and heater loads, and work trucks often add an upfitter switch panel, strobes or a plow. The eight-groove drive spreads that load across a wider belt, which helps the unit keep up when it is asked for steady current. The internal fan also helps keep the unit cooler during long idle periods.
Some 6.7L Super Duty trucks were built with two alternators, and the two positions are not always the same part, so confirm which one failed before you order. The bullets do not state whether this unit is new or remanufactured, and the part number ends in R, so read the full Amazon listing before buying. Confirm year, model and engine with your VIN.
View DB Electrical Super Duty 6.7L Alternator on Amazon

5. AISIN ALTT-00713: 80A Alternator for Toyota Tacoma 2.7L

- 80 amp, 12 volt, clockwise rotation
- Toyota Tacoma 2007-2016, L4 2.7L
- Seven-groove pulley for the factory belt
- Reference part number 27060-75490
AISIN, which the listing describes as an automotive maker since 1965, sells this alternator through its aftermarket line for the 2007 to 2016 Toyota Tacoma with the 2.7L four-cylinder engine. It is a 12 volt, 80 amp unit with clockwise rotation and a seven-groove pulley, and the listing gives Toyota reference number 27060-75490 for checking against your old part.
AISIN says the pulley is machined to hold the belt without slipping and to keep the alternator at the right speed as engine load changes. It is built as a direct replacement, so the mounts and plug should match the original on a correct-fit truck. A four-cylinder Tacoma does not need a large unit for daily driving, and staying at the factory rating keeps the job simple. For an older Tacoma that still sees daily use, that is usually the sensible route.
This listing covers the 2.7L engine only. The 4.0L and 3.5L V6 Tacomas use different, higher-rated alternators, so they need a different part. If you have added a winch, a fridge or several light bars, check whether 80 amps still covers your load. Confirm year, model and engine on Amazon or with your VIN before buying.
View AISIN ALTT-00713 Alternator on Amazon
6. Mechman 400 Amp: High Output Alternator for GM Silverado and Sierra 2014-2018

- 400 amp high-output rating
- GM Silverado, Sierra, Tahoe, Suburban and Escalade 2014-2018
- 6-phase design with 12 diodes
- Uses a 4-pin style regulator in place of the OE 2-pin setup
Mechman lists this 400 amp high-output alternator for 2014 to 2018 GM trucks and SUVs, including the Silverado, Sierra, Tahoe, Suburban and Escalade. The listing describes a six-phase design with 12 diodes, which spreads the output across more windings than a typical stock unit. This one comes in a white finish. It is aimed at owners who need far more current than the factory unit provides, rather than a like-for-like swap.
The main reason to choose it is load. A GM pickup that runs a plow, strobes, a light bar and a heated cab through a long night can outpace a stock alternator, especially at idle. A higher-rated unit gives more headroom, and the six-phase layout is aimed at steadier output. It makes most sense once a weak battery and bad grounds have been ruled out.
Mechman notes that this alternator uses a more robust 4-pin style regulator in place of the factory 2-pin, computer-controlled setup. Ask the seller what that means for your truck’s wiring and charging control before you order. Plan on a heavier charge cable and upgraded grounds, too. Confirm year, model and engine on Amazon or with your VIN first.
View Mechman 400A High Output Alternator on Amazon
Matching Each Listing to Your Pickup
The table puts each listing’s fit and rating side by side. It is a shortcut, not a fitment promise: trim, engine and build date can all change the part.
| Truck and years (as listed) | Listing in this guide | Rating as listed | Main use |
|---|---|---|---|
| Ford F-150 2010-2014 | Bosch AL7679N | 200 A | New stock replacement |
| Silverado 1500 2014-2018, 2500 HD and 3500 HD 2015-2019 | DB Electrical 400-52490 | 220 A | Stock replacement |
| Tundra 2007-2018, Sequoia 2008-2018 (4.6L, 5.7L) | DB Electrical 400-52393 | 150 A | Stock replacement |
| F-250 and F-350 Super Duty 6.7L 2017-2019 | DB Electrical 400-52730R | 175 A | Diesel replacement |
| Tacoma 2007-2016 (2.7L four-cylinder) | AISIN ALTT-00713 | 80 A | Midsize stock replacement |
| GM Silverado and Sierra 2014-2018 | Mechman 400A | 400 A | Plow or heavy accessory load |
If your truck appears on one row only, that listing is the natural starting point. A GM owner who sees two rows should ask how much extra load the truck carries. Put simply, the best alternators for trucks match the old unit’s numbers first and the workload second.

Plow Trucks and West Michigan Winters
A plow is the hardest test a pickup’s charging system faces. The hydraulic pump motor draws heavy current in short bursts, the plow lights stay on for hours and the truck spends long stretches at low engine speed, where most alternators produce well under their rated output.
Plow makers match equipment to the truck for this reason. WESTERN, for example, groups pickups by weight class and points owners to its Quick Match tool for the correct mount and electrical components before a plow goes on.
Shoppers looking for the best alternator for plow truck use should also budget for the wiring. A high-output unit needs a charge cable and grounds sized for its current, and road salt eats at every connection in a Grand Rapids winter. A plug-in maintainer from our winter battery charger guide keeps the battery topped up between storms.

Test the Charging System Before You Buy
A few minutes with a meter saves guessing. With the engine running, many trucks show roughly 13.5 to 14.7 volts at the battery, though late-model GM and Ford trucks vary their charging voltage on purpose, so a lower reading is not always a fault. A unit from our automotive multimeter buying guide reads battery and charging voltage.

On dual-alternator diesels the diagnosis and swap take more time. If you want a technician to confirm the fault first, our car electrical repair service in Grand Rapids checks the battery, alternator output and wiring before any part is replaced.
More Buying Guides
Frequently Asked Questions
Do I need a high-output alternator for a snowplow?
Not always. Many plow trucks run on the factory alternator with a healthy battery and clean wiring. A high-output unit makes sense when the truck idles for long periods with lights, the pump and other accessories running, or when the stock unit keeps falling behind.
Is a higher amp rating safe on a stock truck?
Yes, if the unit fits and the wiring suits it. The alternator only makes the current the truck asks for, but a much larger unit needs a charge cable and grounds sized for its maximum output.
Should a work truck get a new or remanufactured alternator?
Either can work. A new unit avoids a used core, and a well-built rebuild reuses a tested housing with fresh wear parts. Fit, amp rating and the seller’s description matter more than the label.
What are the best alternators for trucks with a 6.7L diesel?
For a 2017 to 2019 F-250 or F-350 Super Duty 6.7L, the DB Electrical 400-52730R lists a 175 amp unit. Some of these trucks carry two alternators, so confirm which one failed and match that position.
Can’t tell whether the alternator, the battery or a ground strap is the weak link in your truck? Ring us at 616-279-3832 Monday through Friday, 8am to 5pm, or schedule a charging system test through our contact page.
Plowing or working all day? Our after-hours drop-off at 456 Carrier St NE in Creston lets the truck come to us on your schedule instead of ours.
