456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Pickups, Diesels and Plow Rigs: Best Battery Charger for Trucks

best battery charger for trucks: red pickup truck parked on a snowy street

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A pickup asks more of a charger than a compact sedan does. The best battery charger for trucks has to refill a big Group 31 or Group 65 battery in a reasonable time, cope with the two batteries many diesels carry and, on some work trucks, handle a 24V system. A small 1 or 2 amp tender can take days to bring one of those batteries back from flat.

Below: what sets truck batteries apart, how to size a charger and six picks for pickups, diesels and work trucks. For a general primer, see our guide to car battery chargers for winter.

Quick answer

What size charger does a pickup or diesel truck need?

Most pickups do well with a 10 to 15 amp smart charger that also has a low maintain setting, such as the Battery Tender 15 AMP. Dual-battery diesels can use a two-bank maintainer like the Battery Tender Plus 2 Bank. Trucks with a 24V system need a charger with a 24V mode, such as the NOCO GENIUSPRO50.

Our Quick Picks

Three chargers that cover the main truck jobs: recharging a big pickup battery, keeping a dual-battery diesel topped up and charging a 24V work truck.

Battery Tender 15 AMP product photo
Most pickups

Battery Tender 15 AMP

12V · 15/8/2 A switchable

Enough output to refill a large truck battery, plus a low rate for storage.

SuitsSingle or parallel dual-battery 12V pickups
View on Amazon →
Battery Tender Plus 2 Bank product photo
Dual-battery diesel

Battery Tender Plus 2 Bank

12V · 2 x 1.25 A

Two separate outputs keep each battery on a diesel pickup topped up.

SuitsDiesels and work trucks parked for weeks
View on Amazon →
NOCO GENIUSPRO50 product photo
24V systems

NOCO GENIUSPRO50

6V/12V/24V · 50 A

High-output smart charger that also charges and maintains 24V systems.

SuitsCommercial trucks and large dual-battery diesels
View on Amazon →

What Makes Truck Batteries Different

Truck batteries are physically larger and usually hold more energy than car batteries. The group number on the label comes from Battery Council International, whose BCI group size classification sorts batteries by voltage, maximum dimensions, terminal layout and special features. Trucks often use the larger groups, such as 65 or 31, so check the label on yours rather than assuming.

Three things shape the charger choice for a truck:

  • Battery size: a large battery that has run down takes far longer to refill, so output in amps matters more than it does on a small car.
  • Two batteries: many diesel pickups carry a pair of 12V batteries to crank a high-compression engine and power the glow plugs or intake heater. They are usually wired in parallel, so the truck is still a 12V system.
  • 12V or 24V: pickups are 12V, but some commercial, military and heavy equipment runs two batteries in series for 24V. A 12V-only charger can’t charge that system as a whole.

Sizing a Charger to a Truck Battery

For a rough charge time, divide the battery’s amp-hour rating by the charger’s amps, then add time because charging slows near full. A 2 amp tender needs days to refill a large, half-empty battery, while 10 to 15 amps usually does it overnight. Ideally you want both: real output for recovery and a gentle maintain mode for storage.

On a parallel dual-battery diesel, the two batteries act like one larger battery. One charger clamped to one battery usually reaches both through the cables, but it has twice as much capacity to fill. A two-bank maintainer connects to each battery separately, which keeps both topped up evenly when the truck sits for weeks.

Workshop units and multi-bank charging stations are covered in our guide to chargers for a home or shop garage. The picks here focus on what you connect to a pickup, a diesel or a work truck.

Best Battery Charger for Trucks: The Picks in Detail

Details come from each Amazon listing or maker page. Check your battery type, size and system voltage before connecting anything.

1. Battery Tender 15 AMP: 12V Charger with Switchable 15/8/2A Rates and LCD

Battery Tender 15 AMP product photo
Key features
  • Switchable 15, 8 and 2 amp charge rates
  • Selectable chemistry: standard, AGM, gel, lithium
  • LCD shows rate, battery type and percent charged
  • Float mode, spark-proof clamps, 5-year warranty

The Battery Tender 15 AMP (model 022-0234-DL-WH) is a 12-volt charger and maintainer built around three switchable charge rates: 15, 8 and 2 amps. That range is what makes it a good fit for trucks. The high setting has the output to bring a large pickup battery, or a parallel pair on a diesel, back up in a sensible time, while the low setting suits a smaller battery or a gentle top-up.

You also choose the battery chemistry. The listing covers standard flooded, sealed maintenance-free, AGM and gel batteries, and its feature bullets add lithium (LiFePO4). An LCD shows the charge rate and battery type you selected, the percentage charged and any error messages, while a two-color LED gives the charging status at a glance. Once the battery is full the charger drops to float mode, and if the voltage sags under load it resumes full output.

Connection is through alligator clips, which are spark-proof, and the charger checks for reversed polarity before it sends power. It has a carry handle and a 5-year warranty. It is a 12V unit only, so it won’t charge a 24V system as a whole, and it has no engine-start function for cranking a dead truck.

View Battery Tender 15 AMP on Amazon

2. Battery Tender Plus 2 Bank: 2.5A Dual-Output 12V Maintainer

Battery Tender Plus 2 Bank product photo
Key features
  • Two independent 12V outputs at 1.25 amps each
  • Temperature compensation on each output
  • 3-step program: initialization, bulk, float
  • Spark-proof with reverse polarity protection

The Battery Tender Plus 2 Bank (022-0165-DL-WH) is a maintainer with two independent charging stations, each delivering 12 volts at 1.25 amps. For a diesel pickup with two batteries, that means each battery gets its own output and its own charge cycle, rather than sharing one set of clamps. It is a tidy way to keep both batteries full when the truck is parked for weeks at a time.

Each output runs a three-step program of initialization, bulk charge and float, then holds the battery without overcharging. Temperature compensation adjusts the charge voltage to the surrounding air, which matters in an unheated pole barn or garage through a Michigan winter. A two-color LED on each bank shows which stage it is in, and the charger is spark-proof with reverse polarity protection. The listing names AGM, sealed maintenance-free, flooded and lithium (LiFePO4) batteries.

Keep its role in mind. At 1.25 amps per bank, it is a maintainer, not a recovery charger, so a pair of flat batteries is better refilled with a higher-output unit first. It also serves a single-battery truck and a second vehicle, a boat or a tractor at the same time. Battery Tender backs it with a 2-year limited warranty.

View Battery Tender Plus 2 Bank on Amazon

Truck battery mounted in a vehicle compartment

3. Victron Energy Blue Smart IP65: 12V 10A Charger with Bluetooth App Control

Victron Blue Smart IP65 12V 10A product photo
Key features
  • 10A output with built-in Bluetooth
  • VictronConnect app for settings and history
  • Power supply mode and eyelet quick connectors
  • IP65 splash resistant, UL1236 certified

The Victron Energy Blue Smart IP65 is a 12-volt, 10-amp charger with Bluetooth built in. Through the free VictronConnect app you can watch voltage and current, review charging history and change settings without walking out to the truck. Victron’s Blue Smart IP65 page lists eight preset charge profiles covering lithium, lead-acid, AGM, gel and flooded batteries, plus a storage mode once the battery is full.

Ten amps is a useful middle ground for a pickup: enough to recharge a large battery overnight, and gentle enough to leave connected. The listing notes efficiency of up to 94 percent and much less heat than typical chargers, along with a power supply mode that can run DC loads with no battery attached. The housing is rated IP65 for splash and dust, and the unit carries UL1236 certification.

It comes with alligator clips, and you can leave the M8 eyelets bolted to the battery and plug the charger into them with the quick connectors, which is handy on a plow truck that comes in and out of service. This model is 12V only. Victron sells separate 24V versions of the Blue Smart IP65 for trucks with a series system.

View Victron Blue Smart IP65 12V 10A on Amazon

4. Clore Automotive PRO-LOGIX PL2310: 10A 6V/12V Smart Charger with Power Supply Mode

Clore PL2310 product photo
Key features
  • 2, 6 and 10 amp charge rates
  • Charges and maintains 6V and 12V batteries
  • Multi-phase charging with temperature compensation
  • Stable power supply mode

The Clore Automotive PL2310 belongs to the PRO-LOGIX line and is a fully automatic smart charger for 6-volt and 12-volt batteries. It offers three charge rates of 2, 6 and 10 amps, so you can pick a fast setting for a large truck battery that has run down or a slower one for a smaller battery and routine top-ups. Its multi-phase charging process runs on its own once you choose the rate.

Temperature compensation is part of the design, adjusting the charge to suit a cold garage or a hot summer shed. The charger also maintains batteries after the charge cycle ends, so it can stay connected to a truck that sits between jobs. A stable power supply mode holds system voltage steady, which helps when a truck’s electronics need a constant supply with the key on.

The 6-volt setting is a bonus if you also keep an older tractor or a classic truck with a 6V system. The 10-amp ceiling suits a single large battery well, though a flat pair on a diesel will take longer. The PL2310 is not a 24V charger, and it does not offer an engine-start function, so treat it as a straightforward charge-and-maintain unit.

View Clore PL2310 on Amazon

Pliers loosening a battery terminal clamp in an engine bay

5. Schumacher DSR123: 15A 12V/24V Wheeled Charger with 250A Engine Start

Schumacher DSR123 product photo
Key features
  • 250A 12V and 150A 24V engine start
  • 15A 12V fast charge, 4A charge and maintain
  • Boost charge up to 50A at 12V, 30A at 24V
  • Steel case on wheels, desulfation mode

The Schumacher DSR123 is a wheeled, professional-grade charger from Schumacher’s DSR line that works on both 12-volt and 24-volt systems. According to the listing, it provides 250 amps of engine start at 12V and 150 amps at 24V, a boost charge from 10 to 50 amps at 12V and 10 to 30 amps at 24V, a 15-amp 12V fast charge and a 4-amp 12V charge and maintain setting.

That spread makes it a fit for an owner with a mix of pickups and 24V equipment, such as a farm truck, a plow rig or older commercial vehicles. Schumacher lists it for gas and diesel vehicles and for standard, AGM, gel and deep-cycle batteries. A desulfation mode aims to help a battery that has sat discharged, and reverse polarity protection guards against swapped clamps.

The build is a steel case with heavy-duty clamps, a retractable handle and solid wheels, plus a 9-foot power cord and 7.5-foot cables. It runs on AC power only, so it is not a portable jump pack. One limit to note: the smart trickle function maintains 12V batteries, so for long-term upkeep of a 24V system you would still need a 24V maintainer.

View Schumacher DSR123 on Amazon

6. NOCO GENIUSPRO50: 50A 6V/12V/24V Smart Charger with Power Supply Mode

NOCO GENIUSPRO50 product photo
Key features
  • 50A at 6V and 12V, 25A at 24V
  • Lead-acid, AGM and lithium (LiFePO4) modes
  • 12V and 24V power supply mode
  • Silicone cables rated to -40ºC, 3-year warranty

The NOCO GENIUSPRO50 is a high-output smart charger that covers 6-volt and 12-volt batteries at up to 50 amps and 24-volt batteries at up to 25 amps. For truck owners, that 24V capability with smart charging is the main draw: it can charge and maintain a series system on commercial or equipment trucks, while still handling a large 12V battery or a parallel pair quickly.

The listing names lead-acid types, including AGM, gel and deep-cycle batteries, as well as lithium (LiFePO4). A built-in thermal sensor adjusts the charge for the temperature, which helps in a cold shop or an unheated barn. It can start charging a battery from as low as 1 volt, and Force Mode lets you charge one that reads zero. Pulse repair modes target sulfation and acid stratification at 6V, 12V and 24V.

A dual-voltage power supply mode, 12V at 50 amps and 24V at 25 amps, holds steady voltage during diagnostic work. The cables are silicone rated to -40ºC with braided shielding, and it ships with a 10-foot extension, a case and a 3-year warranty. It is more charger than most single-battery pickups need, so it makes the most sense for 24V trucks or owners with several vehicles.

View NOCO GENIUSPRO50 on Amazon

Matching the Charger to Your Truck

The best battery charger for trucks depends on how yours is wired and used.

Truck and useChargers that fitWatch for
Gas pickup, single battery, daily driverBattery Tender 15 AMP, Clore PL2310Use the high rate to recover, the low rate to maintain
Dual-battery diesel parked for weeksBattery Tender Plus 2 BankMaintains only; recharge a flat pair first
Dual-battery diesel that went flatBattery Tender 15 AMP, Victron Blue Smart IP65Both batteries share the charge, so allow more time
24V commercial or equipment truckNOCO GENIUSPRO50, Schumacher DSR123Confirm the system voltage before selecting a mode
Plow truck between stormsVictron Blue Smart IP65, Battery Tender 15 AMPKeep the charger dry and off a salty floor
Truck battery chargers matched to wiring and use

With two batteries, trace the cables before buying. Positive to positive means parallel and a 12V charger; positive of one to negative of the other means series and 24V. If the label, manual and wiring disagree, ask a technician first.

Relays and wiring under the hood of a work vehicle

Plow Season and Cold Mornings in West Michigan

A plow truck works its battery hard. Hours at idle with lights, blower and plow hydraulics running can take out more than the alternator puts back. A charger between storms means the next shift starts on a full battery.

Cold makes it worse: a chilled battery delivers less cranking power just when a cold diesel needs more. Hang or mount the charger, since melting snow and road salt collect on a Grand Rapids garage floor.

Pickup with a snowplow clearing a road at dusk

Never charge a frozen, swollen or leaking battery. If the truck won’t turn over on a frigid morning, our article on a car not starting in cold weather helps you sort a weak battery from a starter or fuel problem. For roadside backup, a portable pack from our cold-weather jump starter guide rides along in the cab.

Signs the Problem Is Bigger Than a Charger

Even the best battery charger for trucks only refills what the truck used up. If a pickup goes flat a couple of days after a full charge, something is likely drawing current with the key off, such as an aftermarket light bar, a winch controller or a stuck module. Our walkthrough of why a car battery dies overnight covers the common causes.

Digital multimeter showing a zero reading

On a dual-battery diesel, one failing battery can drag its partner down, so test each on its own. A battery warning light or dim headlights while driving point toward the charging system, and our list of bad alternator symptoms explains what to look for. Our car electrical repair in Grand Rapids traces drains, tests batteries one at a time and checks charging output on foreign and domestic trucks.

Frequently Asked Questions

Do I need to charge both batteries on a diesel truck?

On most diesel pickups the two batteries are wired in parallel, so a charger on one battery reaches both. It simply takes longer, because it is filling twice the capacity. A two-bank maintainer is the tidier option for storage, since each battery gets its own output.

How many amps should a truck battery charger have?

For recharging a large pickup battery overnight, 10 to 15 amps is a practical range. For keeping a parked truck topped up, 1 to 2 amps per battery is enough. Chargers with switchable rates cover both jobs in one unit.

Does my pickup need a 24V charger?

Almost certainly not. Pickups, including dual-battery diesels, run 12V systems. A 24V charger is for trucks and equipment whose two batteries are wired in series, which you can confirm in the manual or by tracing the cables.

Truck battery still dying in Grand Rapids even after a full charge? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a battery and charging check on our contact page.

Need to drop the truck off after work? Our after-hours drop-off is open to you. We’re at 456 Carrier St NE in Creston.