456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Civic to Odyssey: The Best Car Ramps for Honda Owners

best car ramps for honda: close-up of hands using hand tools on metal in a workshop setting

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Honda builds everything from a low Civic Type R to a tall Ridgeline, so one ramp rarely suits the whole family. The best car ramps for Honda owners are the ones matched to the body style in your garage: a gentle climb for the sedans and hatchbacks, and more width and capacity for the Pilot, Passport and Odyssey.

Below we sort the line-up by clearance and weight, explain how to read a ramp listing, and look at five sets that fit different Hondas. Our general guide to car ramps covers taller pairs for trucks if you share the garage with one.

Quick answer

Which ramps suit a Honda Civic, Accord or Odyssey?

For a stock Civic, Accord or CR-V, a long, wide pair with a modest 6 inch lift, such as the OrangeStar set, is a good start. A Pilot, Passport or Odyssey suits a wide, high-capacity pair like the HOXWELL 6.5 inch ramps. For a lowered Civic Si or Type R, a 2.6 inch Nilight ramp gets a jack underneath.

Our Quick Picks

Three sets that cover the Honda range: an all-round pair for the sedans and crossovers, a wide pair for the three-row models, and a short ramp for lowered cars.

OrangeStar 6-Inch Ramps product photo
All-round pick

OrangeStar 6-Inch Ramps

6 in. lift · 13 in. wide

A long, wide plastic pair with a modest lift for sedans and crossovers.

SuitsCivic, Accord, HR-V and CR-V
View on Amazon →
HOXWELL 6.5 in. Ramps product photo
Pilot and Odyssey pick

HOXWELL 6.5 in. Ramps

6.5 in. lift · 16,000 lb GVW

A wide, high-capacity plastic pair for Honda's heavier family vehicles.

SuitsPilot, Passport, Odyssey, Ridgeline
View on Amazon →
Nilight Low Profile Ramps product photo
Lowered Civic pick

Nilight Low Profile Ramps

2.6 in. lift · 8.6 degrees

Short ramps that raise a low car just enough to fit a floor jack.

SuitsCivic Si, Type R and lowered cars
View on Amazon →

Sorting the Honda Line-Up by Clearance and Weight

Honda’s cars and crossovers split neatly into two groups for ramp shopping. The Civic sedan, Civic hatchback, Accord and Insight carry a front air dam that sits fairly close to the ground, and the Si and Type R sit lower still. These cars are light at the front, so capacity is rarely the issue; the angle of the climb is.

The HR-V, CR-V, Passport, Pilot, Odyssey and Ridgeline ride higher, so most standard ramps clear their bumpers without trouble. They are also heavier, and the Odyssey and Pilot need a ramp wide enough for their tires. Here the useful questions are the rated load per ramp and the width of the tire channel.

Hybrid versions of the Accord and CR-V add battery weight, so check the label rather than assuming the gas model’s numbers. If you own one of each, a long, wide pair with modest lift can cover both, or you can keep a short jack-access set for the sedan alongside a heavier pair for the SUV.

Reading a Ramp Listing Against Your Door Jamb Label

Ramp makers quote capacity in three different ways, and it pays to know which one you are reading. GVW is the total vehicle weight the pair is meant for. Some listings give a load per ramp, and some give a load per pair, which is what both front wheels can put on the set at once.

The number to compare it with is on the sticker inside the driver’s door jamb. It lists the gross axle weight rating, or GAWR, for the front axle, and that front figure should sit comfortably under the pair rating of the ramps. When a listing gives two different ratings, plan around the lower one.

Angle matters just as much on the lower Hondas. Set one ramp against a front tire before you drive up and look at the gap between the ramp surface and the air dam. If you can barely fit a finger in there, choose a gentler ramp, a two-piece design or a short starter ramp, and see our car ramps for low cars guide for more on clearance.

Best Car Ramps for Honda: A Closer Look at Five Sets

The first three sets are full service ramps that let you work underneath, and the last two are short ramps that mainly make room for a floor jack on a low car. Every figure below comes from the Amazon listing, so compare it with your own Honda’s label before you order.

1. OrangeStar Car Service Ramps: 6 in. Lift on a 35 in. Gradual Incline

OrangeStar 6-Inch Ramps product photo
Key features
  • 6 in. lift height
  • 35 x 13 x 8 in. per ramp
  • Open grid drains water and snow
  • Anti-slip pads top and bottom

OrangeStar molds this pair from reinforced polymer, and each ramp measures 35 inches long, 13 inches wide and 8 inches tall. The listing describes the climb as a gradual incline that raises the car a full 6 inches. That is slightly less lift than many service ramps, which helps a Civic or Accord keep its air dam clear while still leaving room for a drain pan and a socket wrench underneath.

OrangeStar rates the set for sedans, trucks, SUVs and vans up to 18,000 lb. Read that as the total vehicle figure and still compare it with the front axle rating on your door jamb label. The 13 inch tire path is wide enough for the 235 and 245 size tires found on many CR-V and Accord trims, so the tire sits on the ramp rather than hanging over the edge.

An open grid lets water, snow and grit drain straight through, which matters when the car rolls in from a slushy road. Anti-slip texture on top and pads underneath help keep the ramps from walking forward on smooth concrete. The listing does not quote an approach angle, so test the clearance on a lower car with one ramp against the tire before you drive up.

View OrangeStar 6-Inch Ramps on Amazon

2. Camco 44558 Car Ramps: 7 in. Lift with 3,500 lb per Ramp, Made in the USA

Camco 44558 Ramps product photo
Key features
  • 7 in. lift height
  • 3,500 lb per ramp, 14,000 lb GVW
  • Tires up to 9 1/2 in. wide
  • UV-stabilized polymer, USA made

Camco’s 44558 set is made in the USA from a UV-stabilized polymer. Each ramp is 36 3/4 inches long, 11 7/8 inches wide and 8 inches tall, and gives 7 inches of lift, an inch more than the OrangeStar pair. The extra height makes it easier to slide under a CR-V or HR-V on a creeper and reach the oil filter and drain plug without twisting.

Each ramp is rated at 3,500 lb, with a gross vehicle weight rating of 14,000 lb for the set. The incline is 17 degrees, so it suits the taller Hondas rather than a Civic with a low air dam. One limit to check is tire width: Camco says the ramps are for tires up to 9 1/2 inches wide.

A 235 width tire on a CR-V or Odyssey falls inside that limit, but some Pilot and Passport trims run wider tires, so read the size on your sidewall and move to the HOXWELL set if it is over the limit. The polymer stays light enough to carry and will not rust in a damp garage. For a crossover owner who wants more working height than a basic ramp, this pair is a sound fit.

View Camco 44558 Ramps on Amazon

straight road through prairie with wide open sky

3. HOXWELL Car Ramps: 6.5 in. Lift, 16,000 lb GVW and 12.6 in. Tire Path

HOXWELL 6.5 in. Ramps product photo
Key features
  • 16,000 lb GVW per set
  • 12.6 in. wide tire path
  • 6.5 in. lift, 17 degrees
  • Stackable, rubber feet

HOXWELL builds these ramps from shock-absorbing PP plastic and rates the set for vehicles up to 16,000 lb GVW, with a claim of up to 8,000 lb on a single ramp. Each one measures 35.8 by 12.6 by 8.5 inches, and the 12.6 inch tire path suits the wider tires found on a Pilot, Passport, Odyssey or Ridgeline. The lift height is 6.5 inches.

The approach is a fairly steep 17 degrees, and HOXWELL itself says the ramps suit most cars except low-chassis ones. That makes them a poor match for a Civic or Accord with a low air dam, but the taller Honda SUVs and the minivan have clearance to spare. The listing also says the ramps are certified to PASE-2019 and AS/NZS 2640-2016.

Under each ramp, rubber pads and a broad support base help keep the set from creeping on a smooth floor, and the textured surface gives the tires grip on the way up. The ramps stack together, and a side groove makes them easier to carry. For a family with a three-row Honda that wants a sturdy pair for oil changes and underbody checks, this set fits the job well.

View HOXWELL 6.5 in. Ramps on Amazon

4. Nilight Low Profile Car Ramps: 2.6 in. Lift on an 8.6 Degree Loading Angle

Nilight Low Profile Ramps product photo
Key features
  • 8.6 degree loading angle
  • 2.6 in. lift height
  • 10,000 lb GVW per pair
  • Raised wheel stops

Nilight designed these short polypropylene ramps for cars that sit too low for a floor jack to slide under. Each ramp is 16.93 inches long, 9.25 inches wide and 3.15 inches tall, with a 2.6 inch lift and an 8.6 degree loading angle. That shallow climb is aimed at lowered cars, which makes it a fit for a Civic Si, a Type R or any Honda on coilovers.

This is a jack-access ramp, not a service ramp. You drive the front wheels up, roll the jack under the factory lift point, raise the car and then set jack stands before any work begins. The extra 2.6 inches is what makes that possible on a car whose splitter or air dam sits only a few inches off the floor.

The pair is rated at 10,000 lb GVW, far more than a Civic needs, and the honeycomb channels let water and grit drain away. Raised wheel stops mark the top, and the textured surface and sturdy base help prevent shifting. The maker says to use them on hard, level ground only. They are light and small enough to keep in the trunk for track days.

View Nilight Low Profile Ramps on Amazon

top view of various old carpentry tools and tin cans arranged on shabby wooden table in garage

5. ROBLOCK Removable Low Profile Car Ramps: 2.6 in. Lift with Detachable Tail

ROBLOCK Detachable Low Ramps product photo
Key features
  • 2.6 in. lift, 9 degree slope
  • Tail detaches, 15.35 to 27.83 in.
  • 20,000 lb GVW per listing
  • 8.39 lb per pair

ROBLOCK made this low ramp in two parts. With the tail fitted it is 27.83 inches long; take the tail off and it shrinks to 15.35 inches, which leaves more floor in front of the tire for a floor jack to roll in and lift. The lift is 2.6 inches on a 9 degree slope, gentle enough for a stock or lowered Civic, Accord or Insight.

The listing quotes a 20,000 lb GVW, far beyond any Honda car, built from impact-resistant plastic with an internal honeycomb structure. Each ramp is nearly 8 inches wide, which is narrower than many Honda tires, so measure your tread first; if it is wider, the 9.25 inch Nilight pair is the better fit. A raised front strip helps you feel when the wheel has reached the right spot.

Anti-slip texture on the surface and non-slip pads underneath help the ramps stay put, and drainage holes keep water from pooling after a wet drive. The pair weighs only 8.39 lb, so it is easy to hang on a wall hook. Like any jack-access ramp, it is the first step of the job; the car goes on jack stands before anyone works underneath.

View ROBLOCK Detachable Low Ramps on Amazon

Which Set Fits Which Honda

To compare the best car ramps for Honda models at a glance, the table puts each listed number beside the body styles it suits. Treat the right-hand column as a starting point, since trim, wheel size and any aftermarket lip change the picture.

Ramp setListed lift and angleListed capacityBest Honda match
OrangeStar 6-inch6 in., angle not listed18,000 lb vehicle ratingCivic, Accord, HR-V, CR-V
Camco 445587 in., 17 degrees3,500 lb per rampHR-V, CR-V, Odyssey (tires to 9 1/2 in.)
HOXWELL 6.5 in.6.5 in., 17 degrees16,000 lb GVWPilot, Passport, Odyssey, Ridgeline
Nilight low profile2.6 in., 8.6 degrees10,000 lb GVW per pairCivic Si, Type R, lowered cars
ROBLOCK detachable2.6 in., 9 degrees20,000 lb GVWCivic, Accord, Insight for jack access
Listed lift, approach angle and capacity of five ramp sets, matched to Honda body styles

Where the angle is not listed, the dry run with one ramp against the tire tells you more than any spec sheet. Owners of an Odyssey or Pilot can ignore most angle worries and focus on width and the per-ramp rating instead.

serene view of a rural road

Getting a Honda Up the Ramps Safely

Even the best car ramps for Honda owners rely on a careful routine:

  1. Line them up straight: set both ramps square to the front tires on clean, level concrete, with a helper watching the gap.
  2. Ease up slowly: use a light, steady throttle and stop as soon as the tires settle into the cradle at the top.
  3. Secure the car: set the parking brake, select Park, switch the engine off and chock both rear wheels.
  4. Know the lift points: if you jack the car from the ramps, use only the points Honda shows in the owner’s manual, then set jack stands.
  5. Check before crawling under: push on the car firmly and make sure neither ramp has shifted.

Honda publishes the manual for each model and year on its official owner’s manuals page, including the jacking and lifting diagrams. Look these up before you put a jack under a Civic or CR-V, because the pinch welds and front lift point differ by generation.

detail view of workshop tools

West Michigan winters add one more step. Slush and road salt melt off the tires onto the ramp surface and the floor, so sweep and dry the area first, and let the car sit for a while if it has just come in off a wet road. A rubber mat under each ramp also helps keep plastic ramps from sliding on a sealed garage floor.

Ramps are only one part of a home setup. Our beginner’s list of car maintenance tools covers the drain pan, wrenches and jack stands that go with them, and the low profile floor jack guide helps if you plan to lift a Civic from short ramps.

Leaving the Underside to a Shop

Ramps keep the wheels loaded, which is right for an oil drain or a quick look at the exhaust, but it means brakes, suspension and wheel bearings are out of reach. Honda’s Maintenance Minder also calls for items beyond oil, such as filters and inspections that are easier on a lift.

straight road cuts through dense evergreen forests under a clear sky

When the Minder code lists more than you want to tackle on a garage floor, our factory scheduled maintenance in Grand Rapids works through the full list on a proper lift. For a straight drain and fill, the Creston oil change service saves you the crawl.

Frequently Asked Questions

Will car ramps scrape a Honda Civic bumper?

Steep ramps around 17 degrees can touch the air dam on a stock Civic or Accord. A ramp near 9 or 10 degrees, or a two-piece design, usually clears it. Do a dry run with one ramp against the tire to check the gap first.

What capacity do I need for a Honda Pilot or Odyssey?

Find the front axle rating on the driver’s door jamb label and pick a pair rated well above it. Wide, high-capacity plastic ramps such as the HOXWELL set suit these heavier models. If a listing shows two ratings, use the lower one.

Can I change my Honda’s oil on ramps?

Yes, a 6 to 7 inch service ramp gives room to reach the drain plug and filter on most Hondas. Chock the rear wheels and set the parking brake first. Short 2.5 inch ramps are for jack access, not for working underneath.

Where are the jack points on a Honda?

They vary by model and generation, so use the diagram in your owner’s manual. Honda posts manuals for each model and year on its owner site. Always put jack stands under the car before you work beneath it.

Rather have someone else get under your Honda? Ring 456 AutoFix on 616-279-3832 between 8am and 5pm on weekdays, or request a service slot from our contact page.

Busy until after closing time? Park your Honda at 456 Carrier St NE, Grand Rapids, and hand it over through the after-hours drop-off so it is ready for us in the morning.