456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Heavy Axles and Wide Tires: The Best Car Ramps for Trucks

best car ramps for trucks: mesmerizing aerial shot of fall foliage near a winding road

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A pickup puts far more weight on a ramp than a sedan does, and its tires are often wider than the deck of a typical plastic pair. The best car ramps for trucks carry the full weight of the front axle with room to spare, give the tread a deck it fits on and lift the frame high enough for a drain pan and a creeper.

This guide covers the capacity math for a pickup, how to size a ramp for wide or tall tires, and five sets built with trucks in mind. For general ramp basics and picks for cars, start with our main guide to the best car ramps for home oil changes.

Quick answer

What kind of ramps can safely hold a pickup truck?

Pick a pair whose per-axle or per-pair rating clears your front axle weight from the door sticker, with a deck wider than your tread. The Titan aluminum ramps suit most pickups, the ROBLOCK 8 in. pair is a lighter plastic option, and AFF steel ramps take tires up to 16 in. wide.

Our Quick Picks

Three ramp sets that cover most pickups: an aluminum pair, a lighter plastic pair and a steel pair for very wide tires. All five sets are reviewed below.

Titan Ramps Aluminum Service Ramps product photo
Most pickups

Titan Ramps Aluminum Service Ramps

10,000 lb per axle · 9 in. lift

Aluminum riser ramps with a high axle rating and a wheel stop.

SuitsHalf-ton to heavy-duty pickups
View on Amazon →
ROBLOCK 8 in. Lift Ramps product photo
Light plastic

ROBLOCK 8 in. Lift Ramps

20,000 lb GVW · 8 in. lift

A plastic pair with a wider deck and taller lift than most car ramps.

SuitsHome garages with a stock pickup
View on Amazon →
AFF 20 Ton Truck Ramps product photo
Wide tires

AFF 20 Ton Truck Ramps

20 ton pair · tires to 16 in.

Super heavy-duty shop ramps with a deck for very wide tires.

SuitsLifted or wide-tire trucks, shop floors
View on Amazon →

Doing the Weight Math for a Pickup

Ramp makers state capacity in different ways, and a truck exposes the gaps between them. Some quote a gross vehicle weight (GVW) for the whole truck, some quote the load per ramp, and some quote the load the pair can carry together. When you drive one end of a truck onto a pair, only that axle sits on the ramps, so the pair rating or per-axle figure is the number to compare.

Your truck’s numbers are on the sticker inside the driver’s door jamb. Look for the GAWR FRONT and GAWR REAR figures, which are the most each axle is designed to carry. A diesel or a truck with a plow mount puts a lot of that weight over the front wheels, so leave a generous margin above the front GAWR rather than matching it.

Ramps are covered by the ASME PASE standard for portable automotive service equipment, which also covers jacks and stands. Only treat a ramp as meeting it when the maker says so on the listing or the box.

Tire Width, Lift Height and Approach Angle

Pickup tires are the other reason car ramps fall short. Many plastic car ramps have a track around 9 to 12 inches wide, while all-terrain tires on a lifted truck can run wider than that. A tire that hangs over both edges of a deck loads the sidewall and makes it easy to slip off while climbing.

  • Deck width: measure your tread across the face and pick a ramp listed wider than that figure.
  • Lift height: 7 to 9 inches is common for truck ramps. A stock half-ton already has more ground clearance than a car, so the extra lift adds working room.
  • Approach angle: trucks rarely scrape, but a steep ramp is harder to climb smoothly with a heavy diesel front end.
  • Ramp weight: steel shop ramps can weigh well over a hundred pounds each, so check whether they have wheels and a handle.

Best Car Ramps for Trucks: Five Sets in Detail

Each capacity, height and tire limit below is taken from the product’s Amazon listing. Check those numbers against your door sticker and tire size before ordering.

1. Titan Ramps Aluminum Service Ramps: 20,000 lb GVW with 9 in. Lift and Wheel Stop

Titan Ramps Aluminum Service Ramps product photo
Key features
  • 20,000 lb GVW, 10,000 lb per axle
  • 9 in. lift height
  • Aluminum build that resists rust
  • Built-in wheel stop, stackable

Titan Ramps sells these aluminum riser ramps as semi-truck service ramps, and that rating gives a pickup plenty of headroom. The listing gives a 20,000 lb gross vehicle weight and 10,000 lb per axle. Because only one axle sits on a pair of ramps at a time, the per-axle figure is the useful one, and it sits well above the front axle rating of most half-ton and heavy-duty pickups.

The lift height is 9 inches, which adds real working space on a truck that already rides higher than a car. A built-in wheel stop marks the end of the climb so the tire does not roll off the far side. Titan also lists the ramps as stackable, both for storage and to set one pair on another when a taller truck or van needs more lift, so follow the maker’s instructions for that setup.

Aluminum is lighter to carry than steel and does not rust, which helps in a garage that sees salty slush all winter. The ramps suit oil changes, tire rotations with stands, and underbody checks on trucks and vans. The listing does not state a maximum tire width, so measure your tread and confirm the deck size on the product page before ordering for very wide tires.

View Titan Ramps Aluminum Service Ramps on Amazon

2. ROBLOCK Automotive Ramps: 20,000 lb GVW Plastic Pair with 8 in. Lift and Raised Rails

ROBLOCK 8 in. Lift Ramps product photo
Key features
  • 20,000 lb combined GVW
  • 8 in. lift, 13.58 in. wide
  • 17 degree angle, wheel stops and rails
  • Textured deck with rubber feet

The ROBLOCK ramps are a molded PP plastic pair that the listing aims at trucks as well as cars. ROBLOCK rates the pair at a combined 20,000 lb gross vehicle weight. As with any GVW figure, compare it with the weight that will actually sit on the ramps, which is your front or rear axle rating from the door jamb sticker.

The lift height is 8 inches, taller than the 6 to 7 inches common on car ramps, and the deck is 13.58 inches wide. That extra width matters on a pickup, since many all-terrain tires are wider than a standard car ramp. The approach runs at 17 degrees. Each ramp measures 43.3 by 13.58 by 10.2 inches, and wheel stops plus raised side rails help keep the tire centered on top.

Grip comes from a textured surface, rubber pads underneath and what the listing calls an anti-slip support. The ramps are grooved so they stack or hang on a wall, which helps in a crowded garage. This pair suits a stock half-ton or a midsize truck used for home oil changes and inspections. Plastic loses grip when wet, so dry the floor and the decks first.

View ROBLOCK 8 in. Lift Ramps on Amazon

aerial shot of a winding road through snow-covered fields in a rural winter landscape

3. AFF 20 Ton Truck Ramps: Steel Pair for Tires up to 16 in. Wide with Wheels and Handle

AFF 20 Ton Truck Ramps product photo
Key features
  • 20 ton capacity per pair
  • Tires up to 16 in. wide
  • 47 x 18.25 x 9.25 in. per ramp
  • Heavy-duty wheels, retractable handle

AFF, short for American Forge and Foundry, builds these as super heavy-duty truck ramps for shop use. The listing rates the pair at 20 tons, far beyond any pickup, so the real reason to choose them is the deck. They take tires up to 16 inches wide, which covers the wide all-terrain and mud tires that hang over the edges of most plastic ramps.

Each ramp measures 47 inches long, 18.25 inches wide and 9.25 inches high. Heavy ramps like this are hard to drag around, so AFF fits large wheels and a long retractable handle for rolling them across the floor. A rubber non-skid pad on the bottom resists sliding, and perforated holes in the deck give the tread something to bite on as it climbs.

These suit lifted trucks, wide-tire diesels and small fleet or farm shops that service bigger vehicles as well. They are overkill for a stock compact pickup and take up more room than plastic ramps. The listing gives the overall height rather than a separate lift figure, so check the product page for climb details and make sure your floor is solid, level concrete.

View AFF 20 Ton Truck Ramps on Amazon

4. TOWKING Heavy Duty Car Ramps: 16,000 lb Pair with 7 in. Lift and Alignment Curbs

TOWKING 16,000 lb Ramps product photo
Key features
  • 16,000 lb listed capacity
  • 7 in. lift, 17 degree incline
  • 15 rubber anti-skid pads
  • Self-alignment curbs, front stop

This TOWKING pair is a heavy-duty plastic ramp aimed at SUVs, pickups and light trucks. The listing rates it at 16,000 lb, described as an 8-ton load. That is a lower figure than the 20,000 lb sets here, but it still clears the front axle rating on many stock half-ton trucks, so check your door sticker before deciding it is enough.

The lift is 7 inches on a 17 degree incline, which gives room for an oil drain pan, a filter change and a look at the chassis. TOWKING lists extra-wide platforms for a range of tire sizes without giving an exact width, so measure your tread and check the dimensions on the product page. The title also lists support for jack stands.

Grip comes from 15 rubber pads on the base and a honeycomb surface on the deck. Built-in self-alignment curbs and a front stop give the driver a bump to feel when the tire reaches the top, which helps when nobody is there to guide you. These suit owners of stock pickups and SUVs who want a lighter pair to store and carry. For a lifted truck on oversize tires, a wider deck is a safer match.

View TOWKING 16,000 lb Ramps on Amazon

winding road through lush mountains under a cloudy sky

5. Fworkleft Heavy Duty Truck Ramps: 20 Ton Steel Pair for Tires up to 15.4 in. Wide

Fworkleft 20 Ton Truck Ramps product photo
Key features
  • 20 ton (40,000 lb) capacity
  • 6mm patterned steel construction
  • Tires up to 15.4 in., 18 degree slope
  • 6 in. wheels, riveted rubber pads

The Fworkleft ramps are a steel pair built for shop and job-site use on heavy vehicles. The listing rates them at 20 tons, or 40,000 lb, for trucks, commercial vehicles and heavy equipment. For a pickup owner, that rating means the capacity question is settled, and the decision comes down to fit, weight and storage space.

Each ramp is made from 6mm thick patterned steel with a welded dual base and 4mm riveted rubber pads for traction on the floor. The deck takes tires up to 15.4 inches wide, and the slope is 18 degrees. Six-inch wheels let you roll each ramp into position instead of lifting it, which matters because steel ramps of this size are heavy.

These suit diesel pickups, plow trucks and fleet or farm vehicles serviced in the same garage. The listing does not give a lift height, so look at the product page for dimensions before you plan a job around the clearance. Painted steel can rust where it sits in salty meltwater, so wipe the ramps dry over a West Michigan winter. A smaller home garage is better served by a lighter plastic or aluminum pair.

View Fworkleft 20 Ton Truck Ramps on Amazon

Truck Ramp Comparison at a Glance

Ramp setListed capacityLift and tire fitSuits
Titan Ramps aluminum20,000 lb GVW, 10,000 lb per axle9 in. lift, stackableHalf-ton to heavy-duty pickups
ROBLOCK 8 in.20,000 lb GVW per pair8 in. lift, 13.58 in. wideHome garages, lighter trucks
AFF 20 Ton20 tons per pair9.25 in. tall, tires to 16 in.Very wide tires, shop use
TOWKING 16,000 lb16,000 lb7 in. lift, 17 degree inclineStock pickups and SUVs
Fworkleft 20 Ton20 tons per pairTires to 15.4 in., 18 degree slopeDiesels, fleet and farm trucks
Capacity, lift and tire limits as each Amazon listing gives them. Makers quote capacity differently, so compare with your front axle rating.

For a stock half-ton driven mostly on pavement, a plastic or aluminum pair is easier to live with. Owners of wide-tire diesels or trucks that also serve a farm or a small fleet get more out of the steel shop ramps, as long as the floor and the storage space can handle them.

stunning aerial view

Ramp Safety With a Heavy Truck in a Michigan Garage

Weight works against you if anything goes wrong, so setup matters even more with a truck than with a car. Use the ramps only on flat, dry concrete and drive up at a crawl with someone watching the tires from the side.

  • Line the ramps up straight with the front tires and keep the steering wheel centered.
  • Stop against the wheel stop, shift into park, set the parking brake and shut the engine off.
  • Chock both rear tires front and back before you go under.
  • For longer jobs, add a pair of rated stands under the frame as a backup.
tranquil countryside road stretches through golden fields under a clear blue sky

West Michigan winters add slush and road salt to the mix. A truck carries a lot of melting snow into the garage, and a wet plastic deck loses grip, so clear the floor and wipe the ramps before you drive up. Our guide to jack stands rated for trucks covers backup stands, and a floor jack sized for pickups handles the jobs that need a wheel off.

When the Job Needs a Lift Instead

Even the best car ramps for trucks raise just one end a few inches, with the wheels still on. That works for an oil change, a look at the exhaust or a leak check, but brake, suspension and wheel bearing work on a truck is safer with the whole vehicle on a lift. If you are still building a home kit, our list of car maintenance tools for beginners shows what to buy alongside ramps.

scenic aerial view of a road winding through lush mountains and foggy landscapes

When your owner’s manual calls for a bigger service, our factory scheduled maintenance in Grand Rapids puts the truck on a lift and works through the listed checks. That includes the parts you cannot see well from a creeper, such as ball joints, tie rods and the brake lines along the frame.

Frequently Asked Questions

Can regular car ramps hold a full-size truck?

Some can, if the pair rating or per-axle rating sits well above your front axle rating on the door sticker. The bigger problem is often tire width, because many car ramps are narrower than a pickup’s tread.

Are plastic ramps safe for a pickup?

A plastic pair rated for the load and wide enough for the tires can be used on a pickup. Keep it on dry, level concrete, chock the rear wheels and replace any ramp that shows cracks or a crushed section.

What are the best car ramps for trucks with wide tires?

Steel shop ramps with a wide deck, such as the AFF 20 Ton pair listed for tires up to 16 inches, suit wide all-terrain tires. Measure the tread before you buy and compare it with the listed tire limit.

Do I need jack stands if my truck is on ramps?

Ramps hold the truck on its tires, so stands are not required for a quick oil change. For longer jobs, a pair of rated stands under the frame adds a second layer of support.

Rather leave the underbody work to someone with a lift? Ring 456 AutoFix at 616-279-3832 on weekdays from 8am to 5pm, or set up a maintenance visit through our contact page.

Pickup doesn’t fit your work hours? Leave it with our after-hours drop-off at 456 Carrier St NE in Creston and we’ll take it from there.