As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Subaru’s EJ flat-four powered Foresters, Imprezas, Legacys, Outbacks and WRXs for close to two decades, and it runs a timing belt. The EJ family splits into several belt layouts, so the best timing belt kit for Subaru owners is simply the one built for the exact engine in the car, with the tensioner and idlers changed at the same time.
Below we sort the engine families and review six listings that name the engines they cover. For a wider look at kit makers in general, start with our guide to the best timing belt kit brands.
Quick answer
Which timing belt kit should you buy for a Subaru?
Match the kit to your engine first. A 2006 to 2012 non-turbo 2.5L SOHC car suits the AISIN TKF-006 with water pump. Turbo DOHC cars such as the 2005 WRX STI take a TKF004-type kit like the AUCERAMIC, or the IAG Performance belt kit if you plan to reuse a healthy pump.
Our Quick Picks
Three starting points for the most common Subaru belt jobs. All six kits are reviewed below.

AISIN TKF-006
Complete belt and pump service for the later EJ253 cars.

AUCERAMIC TKF004 Kit
Complete belt and pump kit for EJ205, EJ255 and EJ257 cars.

IAG Performance Timing Belt Kit
Belt kit aimed at modified WRX and STI engines.
Which EJ Engine Is Under Your Hood?
Belt length, tooth count, idlers and the pump all change between EJ families. These rules of thumb cover most US cars, but the listing’s fit notes and your VIN have the final say.
- Early DOHC non-turbo (EJ25D): the first 2.5L cars from the mid-to-late 1990s, such as the 1996 to 1997 Legacy and Outback.
- SOHC non-turbo (EJ251, EJ253): most non-turbo 2.5L Foresters, Imprezas, Legacys, Outbacks and Bajas from about 1999 into the early 2010s.
- DOHC turbo (EJ205, EJ255, EJ257): the WRX, WRX STI, Forester XT, Legacy GT and Outback XT. These use a hydraulic tensioner and a different idler set.
- Timing chain, no belt: the FB engines from the 2011 Forester onward and the FA engines in the later WRX and BRZ.
Not sure which drive your engine uses? Our explainer on timing belt vs timing chain covers how to tell, and Subaru’s own Technical Information System is where the factory service information for each model lives.
What a Subaru Kit Should Put in the Box
Idler bearings and the tensioner wear out alongside the belt, and a seized idler can ruin a new belt quickly. A useful kit replaces every moving part the belt touches.
- Belt, tensioner and all idlers, including the cogged idler on engines that use one.
- Water pump: it is driven by the belt on these engines, so most owners change it while the covers are off.
- Cam and crank seals: an oil-soaked belt ages fast, and a flat-four has seals on both banks.
- Gaskets and instructions, with the pump O-ring or gasket the listing names.
Belt-only kits suit a car whose pump was replaced recently. If you are unsure whether you are due at all, our page on when to replace a timing belt explains the mileage and age signs.
Best Timing Belt Kit for Subaru: Six Kits Compared in Detail
Every kit below names its Subaru engines or model years in the listing. None of them fits every EJ, so match the years, engine code and turbo or non-turbo status to your car before you add one to the cart.
1. AISIN TKF-006: Timing Belt Kit with Water Pump for 2006-2012 SOHC 2.5L Subarus

- Listed for 2006-10 Forester and 2006-11 Impreza
- Also lists 2010-12 Legacy and Outback
- Water pump with diecast aluminum housing
- Belt, tensioner, idlers, gaskets and instructions
The AISIN TKF-006 is a complete timing belt service kit with a water pump, and its listing names the 2006 to 2010 Forester, the 2006 to 2011 Impreza and the 2010 to 2012 Legacy and Outback. Those are the non-turbo 2.5L SOHC cars that make up a large share of Subarus on the road, so this is the kit many daily drivers will be shopping for.
AISIN describes the contents as OE-matched components from suppliers such as AISIN, Mitsuboshi, Toyo and NTN, packed with the timing belt, tensioner, idler pulleys, gaskets and installation instructions. The pump uses a diecast aluminum housing and carbon ceramic seals, according to the listing. The point of the kit is to replace every wear part behind the timing covers at once, since the labor to reach one part is close to the labor for all of them.
This kit is the wrong choice for a turbo WRX, STI, Forester XT or Legacy GT, which use a different belt layout and hydraulic tensioner. Some years in this range carry VIN or transmission notes, and AISIN itself warns that engine may affect fitment. Use the fit checker on the listing, and plan to buy cam and crank seals separately if your engine needs them.
2. A-Premium Timing Belt Kit with Water Pump: 2000-2005 Outback and Legacy 2.5L

- Listed for 2000-05 Outback and Legacy 2.5L
- Also lists 2003-06 Baja
- Includes water pump with seal and O-ring
- Two cam seals and a crank seal in the box
A-Premium’s kit targets the earlier SOHC 2.5L cars, and the listing names the 2000 to 2005 Outback and Legacy plus the 2003 to 2006 Baja. Within those years it adds detail that matters: the 2005 Legacy and Outback entries are marked SOHC, and the Outback lines call for the fourth VIN character to be B. That kind of note is exactly where Subaru fitment mistakes happen.
The box holds a timing belt, a water pump with its seal and O-ring, a timing idler sprocket, a tensioner, two idlers, two camshaft front seals and a crankshaft front seal. Having the seals included is useful on a flat-four, where a small oil leak at a cam seal can soak a new belt. A-Premium states a one-year, unlimited-mileage guarantee on the kit, so keep your order details with the car’s service records.
This listing does not cover the turbo Outback XT or Legacy GT, the 2006 and later SOHC cars, or the early DOHC engines of the late 1990s. A-Premium asks buyers to enter their vehicle on the listing and read its special notes before ordering, and that step is worth taking here. Check the VIN character on your registration or the plate inside the door jamb if you are unsure.
View A-Premium Outback Timing Belt Kit on Amazon

3. AUCERAMIC TKF004: Timing Belt Kit with Water Pump for 2.0L and 2.5L DOHC Turbo Subarus

- Lists 2004-14 Impreza WRX STI and 2002-05 WRX
- Forester XT, Legacy GT and Outback XT years named
- Cross-references TKF004 and TCKWP328
- Includes pump, idlers, tensioner and cam and crank seals
The AUCERAMIC TKF004 is a complete kit for Subaru’s turbocharged DOHC engines, and its listing names the EJ205 and EJ255 alongside a long model list. That list includes the 2002 to 2005 Impreza WRX 2.0L, the 2004 to 2014 Impreza WRX STI and 2014 to 2017 WRX STI, the 2004 to 2008 Forester XT, the 2005 to 2012 Legacy GT and the 2005 to 2009 Outback XT, plus the Baja turbo and Saab 9-2X. For a 2005 WRX STI owner, this is one of the clearer matches on Amazon.
The package lists a timing belt, tensioner, timing idler sprocket, upper small idler bearing, two timing idlers, a water pump set, two intake and two exhaust camshaft seals and a crankshaft seal. A DOHC engine has four cam seals, so having all of them in the kit saves a separate parts order. The listing cross-references TKF004, TCK328 and TCKWP328, which helps when you compare it with the old part or a parts catalog.
This is a value-oriented alternative to the big-name kits rather than an OE-branded one. Check the listing’s fit data against your exact year, because some later turbo engines use a different water pump. It is not a match for any non-turbo SOHC Subaru.
View AUCERAMIC TKF004 Kit on Amazon
4. Subaru Genuine OEM Timing Belt Kit with Pulleys for Turbo WRX, STI, Forester, Legacy and Outback

- Sealed Subaru Genuine parts
- Timing belt 13028AA240
- Three belt idlers and one cogged idler
- Tensioner 13033AA042 (not for 2002-03 WRX)
This kit bundles Subaru Genuine parts for the turbocharged EJ engines, and the listing names WRX, STI, Forester, Impreza, Legacy and Outback turbo applications. Each item comes in Subaru packaging with its factory part number: timing belt 13028AA240, two belt idlers 13073AA142, cogged idler 13085AA080, belt idler 13073AA230 and tensioner 13033AA042.
The appeal is simple. Factory part numbers make it easy to check the kit against a parts catalog or the old components on the engine, and you get the same pieces the car was built with. The listing is also upfront about exceptions: the 2002 to 2003 WRX takes a different idler, 13073AA200, and the included tensioner does not fit those two years. That level of detail helps owners of early bugeye WRXs avoid a wrong order.
There is no water pump, thermostat or seal set in this kit. If your pump is original or showing any weep, budget for a separate pump and gaskets, along with cam and crank seals if they are leaking. This is a turbo-engine kit, so it will not suit a non-turbo SOHC Forester or Outback. Check the part numbers against your VIN before buying, especially on early and late model years.
View Subaru Genuine Timing Belt Kit on Amazon

5. IAG Performance Timing Belt Kit: Red Racing Belt and Billet Guide for EJ20 and EJ25 Turbo

- Lists 2002-14 WRX and 2004-21 STI
- Also 2005-12 Legacy GT and 2004-13 Forester XT
- Kevlar-construction belt with H-NBR teeth
- Billet aluminum timing belt guide, OEM FHI tensioner
IAG Performance is a Subaru specialist, and this kit is built around its red racing timing belt for EJ20 and EJ25 turbo engines. The listing names the 2002 to 2014 WRX, the 2004 to 2021 STI, the 2005 to 2012 Legacy GT and the 2004 to 2013 Forester XT. For a 2005 WRX STI that sees boost upgrades or track days, it is a direct-replacement option aimed at that use.
IAG says the belt uses Kevlar construction with H-NBR teeth, and it describes the belt as stronger and more heat resistant than the factory part. The kit pairs it with a billet timing belt guide machined from 6061 aluminum, which is adjustable to set belt clearance and is meant to help prevent a belt from skipping a tooth. The tensioner, cog, smooth idlers and small roller are OEM FHI units, which keeps the parts most likely to fail close to factory spec.
A water pump is not included, so check the condition of yours and plan accordingly. A stock commuter WRX does not need a racing belt, and a standard full kit with a pump may be the more practical buy. This kit is also not for non-turbo Subarus or the later chain-driven WRX.
View IAG Performance Timing Belt Kit on Amazon
6. Evergreen TBK277MWPA: Timing Belt Kit with AISIN Water Pump for 1996-97 2.5L DOHC EJ25D

- Listed for 1996-97 Legacy and Outback 2.5L
- DOHC 16-valve EJ25D engine
- AISIN water pump included
- Belt, tensioner and idler pulleys
Evergreen’s TBK277MWPA covers a narrow but often overlooked group: the first 2.5L DOHC Subarus. The listing names the 1996 to 1997 Legacy and Outback with the 16-valve EJ25D, an engine with its own belt routing that does not share a kit with the later SOHC cars. Owners of these older wagons often struggle to find a listing that names their engine this clearly.
The kit includes a timing belt, a tensioner and the idler pulleys, which Evergreen describes as a full replacement of the timing system, and it adds an AISIN water pump. Evergreen says the parts are made to meet the specifications of the original components and states that the kit is guaranteed to fit the listed vehicles. With a pump from a known OE supplier in the box, this is a complete service for a car that may be on its third or fourth belt.
Engines of this age are often due for more than a belt, and cam and crank seals are not listed among the contents, so check for oil leaks before you close everything up. The kit does not suit 1998 and later cars, turbo engines or the SOHC 2.5L. Read the full description on the listing for any production-date notes that apply to your car.
View Evergreen TBK277MWPA on Amazon
Matching Kit to Engine: Fit Chart
| Kit | Engine family | Subaru models named | Water pump |
|---|---|---|---|
| AISIN TKF-006 | 2.5L SOHC non-turbo | 2006-10 Forester, 2006-11 Impreza, 2010-12 Legacy and Outback | Included |
| A-Premium Outback kit | 2.5L SOHC non-turbo | 2000-05 Outback and Legacy, 2003-06 Baja | Included |
| AUCERAMIC TKF004 | 2.0L and 2.5L DOHC turbo | 2002-05 WRX, 2004-14 WRX STI, Forester XT, Legacy GT, Outback XT | Included |
| Subaru Genuine kit | DOHC turbo | WRX, STI, Forester, Legacy and Outback turbo models | Not included |
| IAG Performance kit | EJ20 and EJ25 DOHC turbo | 2002-14 WRX, 2004-21 STI, 2005-12 Legacy GT, 2004-13 Forester XT | Not included |
| Evergreen TBK277MWPA | 2.5L DOHC non-turbo (EJ25D) | 1996-97 Legacy and Outback | Included (AISIN) |
Start with the engine family, then narrow by model year. For most non-turbo daily drivers, the best timing belt kit for Subaru engines is a complete kit with a pump. Turbo owners can choose between full kits and belt-and-idler sets.

Cold Starts, Coolant and the Water Pump
West Michigan winters are hard on the cooling side of a belt job. Cold starts load the pump bearing, and a pump that weeps at the seal can drip coolant onto the new belt, which is why so many kits pair the two.
The coolant matters too. Subaru moved from green coolant to its blue Super Coolant over the years, and refilling with the wrong type after a pump change is a common mistake. Our guide to the best coolant for Subaru models sorts out which one your year needs, and the best water pump brand guide helps if you prefer to buy the pump on its own.

When to Leave the Belt Job to a Shop
Sources describe the EJ25 as an interference engine, so a belt that slips a tooth or snaps can let the valves meet the pistons. Timing marks on both banks, a tensioner that must be compressed and pinned, and cam sprockets that spring out of place make this a careful job. A whine up front, a coolant drip near the covers or a belt past its interval all deserve an inspection.

Our timing belt replacement in Grand Rapids covers belts, tensioners, idlers and water pumps on foreign and domestic vehicles, Subarus included.
More Buying Guides
Frequently Asked Questions
What is the best aftermarket timing belt kit for a 05 Subaru WRX STI?
The 2005 STI uses the turbo DOHC EJ257, so it needs a TKF004-type kit. The AUCERAMIC TKF004 lists the 2004 to 2014 Impreza WRX STI and includes a water pump, while the IAG Performance kit covers 2004 to 2021 STI models with an upgraded belt and billet guide.
How often does a Subaru EJ25 timing belt need replacing?
Many EJ-engine Subarus list an interval of around 105,000 miles or a set number of years, whichever comes first. Intervals vary by model and year, so check your owner’s manual or maintenance booklet for your car.
Should I change the water pump with my Subaru timing belt?
Usually, yes. The pump is driven by the timing belt on EJ engines, and most of the labor to reach it is already done. For high-mileage cars, the best timing belt kit for Subaru engines includes the pump.
Does my newer Subaru have a timing belt?
Probably not. The FB engines that started appearing in the 2011 Forester, and the FA engines in later WRX and BRZ models, use timing chains. The turbo EJ257 in the WRX STI kept a belt through 2021.
Is your Subaru getting close to its belt mileage, or making a new noise up front? Ring 456 AutoFix at 616-279-3832 between 8am and 5pm on weekdays, or request a timing belt appointment online.
If the workday leaves no time to bring the car in, our after-hours drop-off is there for you. The shop is at 456 Carrier St NE, Creston, in Grand Rapids.
