As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Miata that darts over expansion joints, or a CX-5 that thumps every time you brake into a turn, usually has a tired control arm somewhere up front. Picking the best control arms for Mazda models comes down to three questions: which car and generation you drive, which arm is worn, and whether one side or both need replacing.
This guide sorts six listings by model, from the NA and NB Miata to the Mazda3, Mazda6, CX-5 and CX-9. If you want background on the companies behind these parts first, see our overview of control arm brands and how they compare.
Quick answer
Which control arms fit my Mazda?
For an NA Miata, start with the TRQ 1990-1997 upper arm set, and for an NB, its TRQ 1999-2005 sibling. A 2017-2024 CX-5 can use the Detroit Axle lower pair, an older CX-5 or Mazda6 the MOOG RK623521, and the CX-9 an A-Premium pair. Confirm year, side and trim on Amazon.
Our Quick Picks
Three listings that cover the Miata generations and the newer CX-5. Check your year, side and trim on Amazon before you order.

TRQ NA Miata Upper Arm Set
A matched pair of OE-style upper arms for the first-generation Miata.

TRQ NB Miata Upper Arm Set
A two-arm upper kit sized for the second-generation Miata.

Detroit Axle CX-5 Lower Arm Pair
A complete lower arm pair for the second-generation CX-5.
Miata Wishbones and Strut-Front Mazdas Need Different Arms
The MX-5 Miata uses a double wishbone layout, so each front corner has an upper and a lower arm. On the NA and NB cars, the upper arm carries its ball joint as part of the assembly, which is why most owners replace the whole arm instead of pressing in a joint.
The Mazda3, Mazda6, CX-5 and CX-9 use a MacPherson strut up front, so there is only a lower control arm at each front corner. That arm holds the ball joint at its outer end and two rubber bushings where it bolts to the subframe. When the rear bushing tears, you often feel a clunk under braking or a shimmy through the wheel.
Generations matter too. NA and NB Miata arms are listed separately, and the first-gen CX-5 shares its lowers with the 2014 and later Mazda6, while the second-gen CX-5 uses a different part.
One Side, a Pair or an Adjustable Arm
Decide what you are fixing before you shop, because the listings below come in two forms.
- Single arm: when one corner has a torn bushing or a loose joint and the other side checks out tight.
- Matched pair: on a high-mileage car, where the second side is usually close behind.
Clunks can come from several places, so confirm the source first. Our guide to a clunking noise over bumps walks through the usual suspects, and our article on Audi control arm failure symptoms describes warning signs that apply to Mazdas just as well.
Best Control Arms for Mazda: Listings by Model
The picks below run from the oldest Miata to the newest crossover. Each of these best control arms for Mazda owners names its own years and position, so treat the list as a shortlist and let the fit checker decide.
1. TRQ Upper Control Arm Set: Front Left and Right with Ball Joints for 1990-1997 Mazda Miata

- Front upper arms, driver and passenger side
- Listing names 1990-1997 Mazda Miata (NA)
- Ball joints come installed in both arms
- Limited lifetime warranty per the listing
This TRQ set contains two front upper control arms for the 1990-1997 Mazda Miata, one for the driver side and one for the passenger side, each with the ball joint already fitted. On the NA, the upper arm locates the top of the steering knuckle, so a loose joint or a split bushing here shows up as vague steering, a knock over sharp bumps and camber that will not hold.
The listing cross-references the factory part numbers and the MOOG RK622749 and RK622750, which helps when you are matching the arm against what came off the car. Because the pair comes as one kit, both sides get fresh joints and bushings at the same time, and the car should feel even from left to right. TRQ backs the set with a limited lifetime warranty against defects, and it publishes installation videos for many of its parts.
This is a direct replacement at factory geometry, not an adjustable arm, so it will not add camber range on a lowered car. It is also listed only for the NA, as the NB uses its own set further down. Confirm your year and trim in the Amazon fit checker, torque everything to Mazda’s figures, and book an alignment once both arms are in.
View TRQ NA Miata Upper Arm Set on Amazon
2. TRQ Upper Control Arm Set: Front Left and Right with Ball Joints for 1999-2005 Mazda Miata

- Front upper arms, driver and passenger side
- Listing names 1999-2005 Mazda Miata (NB)
- Pre-assembled with ball joints
- Limited lifetime warranty per the listing
TRQ’s NB kit pairs a driver side and a passenger side front upper control arm for the 1999-2005 Mazda Miata, each one supplied with its ball joint in place. The NB carries over the double wishbone idea from the NA but uses its own part numbers, so this set is the one to look at when the car was built after the 1998 model year gap. Worn uppers on these cars tend to show up as clicks while turning and a front end that wanders on grooved pavement.
The listing gives a long list of interchange numbers, including the Mazda NC10-34-200 family, which makes it easier to compare against the old part or a parts catalog. Both arms arrive pre-assembled as direct replacements, so the job is mostly unbolting the old arm and torquing the new one in. TRQ adds a limited lifetime warranty against defects in materials and workmanship.
Like the NA version, this is a factory-geometry part rather than an adjustable one. It also does not cover the lower arms, which wear on their own schedule and are sold separately. Enter your year and trim in Amazon’s fit checker before ordering, inspect the lower bushings while the corner is apart, and finish with an alignment.
View TRQ NB Miata Upper Arm Set on Amazon

3. BRTEC Front Lower Control Arm Pair: Ball Joints and Grease Fittings for 2004-2009 Mazda 3

- Front lower arms, left and right side
- Listing names 2004-2009 Mazda 3 and several Mazda 5 years
- Grease fittings for later lubrication
- Castle nuts and cotter pins included
The BRTEC pair covers both front lower control arms on the 2004-2009 Mazda 3 with the 2.0 and 2.3 liter engines, and the listing also names the 2006-2010 and 2012-2014 Mazda 5. Each arm comes with its ball joint installed, so a worn corner can be refreshed in one step without pressing a separate joint. On these cars, a torn rear bushing typically shows up as a clunk when braking and a wheel that shimmies over rough pavement.
One practical difference from many sealed replacements is the grease fitting on each joint, which lets you add fresh grease during oil changes. That can push out moisture before a Michigan winter. The kit includes castle nuts and cotter pins, and the listing gives the Mazda interchange numbers B32H-34-300 and B32H-34-350 for comparison with the factory parts.
This pair is for the first-generation Mazda3 only. The 2010 and later car uses different arms, so check the year carefully. Greaseable joints also need that maintenance to deliver their benefit. Confirm fit with the Amazon fit checker, torque the bushing bolts at ride height, and get an alignment after the swap.
View BRTEC Mazda3 Lower Arm Pair on Amazon
4. MOOG RK623521: Front Right Lower Control Arm and Ball Joint for 2013-2016 CX-5 and 2014-2020 Mazda 6

- Front lower, right (passenger) side
- Listing names 2013-2016 CX-5 and 2014-2020 Mazda 6
- Ball joint and bushings installed
- Left side partner is the RK623522
The MOOG RK623521 is a front right lower control arm with the ball joint for the 2013-2016 Mazda CX-5 and the 2014-2020 Mazda 6. These two models share their front lower arm design, so one listing covers both the compact crossover and the midsize sedan. The arm carries the outer ball joint and the two subframe bushings, and it is the part most often blamed for a thump under braking on these cars.
MOOG is a chassis brand from DRiV, and its part numbers are widely used as the reference that other brands cross to. The listing describes the arm as built to hold alignment and steady handling under everyday road stress. Because it is sold as a single side, you can replace only the passenger corner when the driver side still checks out, and the matching left arm is the RK623522.
This arm does not fit the 2017 and later CX-5, which has its own lower arm, and it is not a pair. If both sides are worn, order the RK623522 as well so both corners match. Enter your model, year and trim in the Amazon fit checker, and plan an alignment once the new arm is installed.

5. Detroit Axle Front Lower Control Arm Pair: Ball Joints Installed for 2017-2024 Mazda CX-5

- Front lower arms, driver and passenger side
- Listing names 2017-2024 Mazda CX-5
- Ball joints come installed
- 10-year warranty per the listing
Detroit Axle’s pair covers both front lower control arms on the 2017-2024 Mazda CX-5, with the ball joints already installed in each arm. The second-generation CX-5 uses a different lower arm from the first, so this is the listing to compare against if your crossover has the redesigned body. Worn arms on these vehicles usually announce themselves with a knock over speed bumps or a steering wheel that needs constant small corrections.
Buying the two sides together keeps the bushings and joints at the same age, which helps the front end feel balanced after the job. Detroit Axle says its suspension parts go through impact, wear and fatigue testing, and the listing mentions a 10-year warranty. For a family crossover that piles up highway miles and winter commutes, a long coverage period is a reasonable thing to weigh.
This pair is an OE-style replacement for the 2017-2024 CX-5 only, and it does not fit the 2013-2016 model. It also does not include sway bar links or tie rods, which some kits bundle in. Check your exact year and trim in the Amazon fit checker before buying, inspect the struts while the front is apart, and have the car aligned when you are done.
View Detroit Axle CX-5 Lower Arm Pair on Amazon
6. A-Premium Front Lower Control Arm Pair: Ball Joints and Bushings for 2007-2015 Mazda CX-9

- Front lower arms, driver and passenger side
- Listing names 2007-2015 Mazda CX-9
- Steel arms, pre-greased ball joints, bushings included
- 1-year warranty per the listing
The A-Premium pack contains two front lower control arms for the 2007-2015 Mazda CX-9, one for each side, with the ball joints and bushings already installed. The CX-9 is the heaviest vehicle in this guide, and a three-row crossover loaded with passengers puts real strain on its lower arms. Typical complaints that point here are clunking over bumps, steering wander and tires wearing on their inner edges.
The arms are steel, and the ball joints arrive pre-greased. The listing gives a long set of reference numbers, including Mazda and aftermarket equivalents, which makes it easier to confirm that the new arm matches the old one. Because both sides are included, the front end gets matching parts in one visit, which keeps the handling even from left to right.
This pack is only for the first-generation CX-9; the 2016 and later model uses a different arm. The listing states a one-year warranty, which is shorter than some others here, so weigh that against how long you plan to keep the vehicle. Confirm your year and trim in the Amazon fit checker, and schedule an alignment after the arms go in.
View A-Premium CX-9 Lower Arm Pair on Amazon
Mazda Fit Table: Model, Years and Corner
This table repeats the fit each listing states. Trim, drivetrain and production date can still change the part, so it narrows the search rather than ending it.
| Mazda model and years | Position | Listing to check |
|---|---|---|
| Miata NA 1990-1997 | Front upper, both sides | TRQ upper arm set |
| Miata NB 1999-2005 | Front upper, both sides | TRQ upper arm set |
| Mazda3 2004-2009, Mazda5 | Front lower, both sides | BRTEC lower pair |
| Mazda6 2014-2020, CX-5 2013-2016 | Front lower, right side | MOOG RK623521 (left is RK623522) |
| CX-5 2017-2024 | Front lower, both sides | Detroit Axle pair |
| CX-9 2007-2015 | Front lower, both sides | A-Premium pair |
Not on the list? Find the generation, decide which arm is worn and check whether the side matters. When both corners are done, buy matching brands.

Road Salt, Potholes and a Recall Lookup
MOOG’s guide to the signs of a failing control arm names potholes, curbs and road salt as common causes of damage, alongside normal wear. That describes a Grand Rapids winter well: brine creeps into bushings and boots, and the spring thaw leaves deep holes on the way to work.
After a hard hit, our pothole damage signs checklist covers what else to look at. Before ordering parts, run your VIN through Mazda’s recall lookup in case an open campaign covers the front suspension.

Tired struts let the car crash into every bump, which loads the arm bushings harder. Our look at shocks and struts for daily drivers explains how to tell when they are spent.
Fitting the Arm and Knowing When to Hand It Off
A complete arm with the joint and bushings installed is simpler than pressing parts, but it is still safety work. Support the car on stands, separate the ball joint taper from the knuckle, and torque every bolt to Mazda’s figure. Snug the bushing bolts with the suspension at ride height so the rubber is not twisted at rest.

Even the best control arms for Mazda cars will wear tires unevenly if the alignment is left alone, so book one right after the swap. If rusted subframe bolts or a seized joint turn the job into a fight, our suspension repair service in Grand Rapids handles control arm replacement and the steering check that goes with it. Hendrick Hoffman, who owns the shop and leads the work, holds ASE and State of Michigan certification covering steering and suspension.
More Buying Guides
Frequently Asked Questions
Do NA and NB Miata control arms interchange?
Treat them as separate parts. TRQ sells one upper arm set for the 1990-1997 NA and a different set for the 1999-2005 NB, each with its own reference numbers. Check your model year in the fit checker before you order.
Does a CX-5 use the same lower control arm as a Mazda6?
For some years, yes. The MOOG RK623521 lists both the 2013-2016 CX-5 and the 2014-2020 Mazda6. The 2017 and later CX-5 uses a different arm, such as the Detroit Axle pair in this guide.
Should I replace one control arm or both sides?
If only one side has a torn bushing or a loose joint and the car is fairly young, one arm is fine. On a high-mileage Mazda, replacing both keeps the front end even, and several listings here come as pairs.
Do I need an alignment after replacing a Mazda control arm?
Yes. A new arm moves camber and toe slightly, even when it matches the original. An alignment keeps the car tracking straight and stops the tires from wearing on one edge.
Is your Mazda knocking over railroad tracks or drifting toward the curb? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a suspension check through our contact page.
If your schedule leaves no gap during our hours, bring the Mazda to 456 Carrier St NE once your day wraps up and hand it over through the after-hours drop-off, with a short note on when the noise shows up.
