456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

First Gen to 2025: Choosing the Best Control Arms for Tundra Trucks

best control arms for tundra: bright orange tanker truck rear view against clear blue sky

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A Tundra is heavy up front, and its suspension arms take every pothole, curb and boat ramp at full weight. Picking the best control arms for Tundra trucks depends on three things: which generation you own, which corner is worn, and whether the truck still sits at factory height.

This guide covers all three generations, stock and lifted. For background on the companies behind these parts, see our overview of control arm brands and how they differ is a useful starting point.

Quick answer

Which control arm should a Tundra owner order?

Start with your generation. On a stock 2007-2021 truck, an OE-style arm with the ball joint installed, such as the MOOG RK621304 lower, is the direct swap. First gen owners can look at the TRQ upper pair, and lifted 2022-2025 trucks suit the Rough Country forged uppers. Confirm year and side on Amazon.

Our Quick Picks

Three listings that cover the most common Tundra front end jobs, from first gen uppers to lifted third gen trucks. Check your year and side on Amazon before ordering.

MOOG RK621304 product photo
2007-2021 lower

MOOG RK621304

Front left lower, ball joint included

A one-piece MOOG lower assembly for second gen trucks.

SuitsStock 2007-2021 Tundras with a worn driver side lower
View on Amazon →
TRQ Upper Arm Pair (2000-2006) product photo
First gen pick

TRQ Upper Arm Pair (2000-2006)

Front upper, both sides

A matched pair of uppers for the original 2000-2006 Tundra.

SuitsFirst gen owners refreshing both upper arms
View on Amazon →
Rough Country Forged Uppers (2022-2025) product photo
Lifted 2022+

Rough Country Forged Uppers (2022-2025)

Front upper pair, 3.5 in lift

Forged aluminum uppers for third gen trucks on a lift.

Suits2022-2025 Tundras running a 3.5 inch lift
View on Amazon →

Three Tundra Generations, Three Sets of Arms

Toyota has built the Tundra on three different platforms, and front arms do not cross between them. The first generation ran from 2000 to 2006, the second from 2007 to 2021, and the third started with the 2022 model year. Toyota’s 2022 Tundra press materials describe a new boxed steel ladder frame and a redesigned rear suspension, so a newer truck is not a facelift underneath.

All three use a double wishbone front end, with a shorter upper arm and a longer lower arm at each wheel. Before you add anything to the cart, write down these details:

  • Model year: it decides the generation, and a 2021 and a 2022 share nothing up front.
  • Corner: upper or lower, driver or passenger. Many listings cover a single arm.
  • Ball joint: most second gen arms come with the joint pressed in; check the listing on older trucks.
  • Ride height: factory, leveled or lifted, because it changes which upper arm makes sense.

Still not sure an arm is the culprit? A clunk over bumps, steering that wanders and tires wearing on one edge all point toward tired bushings or joints, and our article on the warning signs of a failing control arm explains each symptom. It was written around Audis, but the clues carry over.

Factory Height or Lifted: Which Upper Arm Fits

At stock height, copy the original part. An OE-style arm with rubber bushings and a factory-angle ball joint keeps the ride and alignment range the truck was built with.

Raising the front changes the geometry. The upper ball joint tilts toward the end of its travel, and caster often drops below what the alignment rack can correct. Aftermarket uppers move the joint and add caster back, and they are sold for a specific lift range. A small leveling spacer may still align on the factory uppers, so let the alignment numbers decide before you buy lift arms.

Best Control Arms for Tundra: Six Listings by Generation

Every listing below names its Tundra model years, and the single-arm listings name a side and position. Run your truck through Amazon’s fit checker and read any fitment notes before ordering.

1. MOOG RK621304: Front Left Lower Control Arm with Ball Joint for 2007-2021 Tundra

MOOG RK621304 product photo
Key features
  • Front left (driver side) lower position
  • Arm and ball joint come as one assembly
  • Listing names 2007-2021 Tundra and 2008-2022 Sequoia
  • Made under the MOOG brand by DRiV

The MOOG RK621304 is a complete front lower control arm for the driver side of a second generation Tundra. The listing names 2007-2021 Tundra and 2008-2022 Sequoia, and it ships with the ball joint already installed, so you are not pressing a joint into an old arm or reusing tired bushings. It is meant for trucks at factory height that need the original geometry back.

The lower arm carries most of the truck’s weight through the spring and shock, which is why its bushings and joint tend to wear before the upper arm does. MOOG describes the part as built to hold proper alignment and steady handling, and replacing the whole assembly removes every rubber and pivot wear point on that corner in one job. A loose lower joint often shows up as a knock when braking or as uneven inner tire wear.

This is a single arm for the left side only; the passenger side uses a different part number, so order the mirror arm if both corners are worn. It is not built for lifted trucks that need extra joint angle. Enter your Tundra’s year, cab and drivetrain on Amazon to confirm the fit before you buy, and plan an alignment afterward.

View MOOG RK621304 on Amazon

2. TRQ Front Upper Control Arm Set: Driver and Passenger Arms with Ball Joints for 2007-2021 Tundra

TRQ Upper Arm Set (2007-2021) product photo
Key features
  • Driver and passenger front upper arms in one kit
  • Ball joint fitted to each arm
  • Listing names 2007-2021 Tundra and 2008-2022 Sequoia
  • Cross references Toyota 48610-0C010 and 48630-0C010

TRQ’s front upper control arm set covers both sides of a second generation Tundra in one box. Each arm comes with its ball joint installed, and the listing names 2007-2021 Tundra and 2008-2022 Sequoia. The reference list includes the Toyota numbers 48610-0C010 and 48630-0C010, which helps when you want to compare it against the original part tag or a parts catalog.

On these trucks the upper ball joint is part of the arm, so a torn boot or a loose joint usually means replacing the arm itself. Buying both sides at once keeps the bushings and joints at the same age, which helps the truck steer evenly and saves a second trip under the fender later. TRQ sells the arms as direct replacements with no changes needed to the mounting points.

These are stock-geometry arms, so they suit trucks at factory height or with a mild leveling spacer that still aligns in spec. A truck with a taller lift that runs out of caster will be better served by a lift-specific upper. Check that your model year and drivetrain appear in Amazon’s fit tool before ordering, and have the alignment set when the job is done.

View TRQ Upper Arm Set (2007-2021) on Amazon

top-down view of roads lined with autumn trees

3. ICON 58460DJ: Tubular Front Upper Control Arms with Delta Joint for 2007-2021 Tundra

ICON Tubular Uppers 58460DJ product photo
Key features
  • CNC bent 1026 DOM steel tubing
  • Greaseable Delta Joint in place of a ball joint
  • Built-in caster correction
  • Serviceable dual stage bushings

ICON’s 58460DJ kit replaces both front upper arms on a 2007-2021 Tundra or 2008-2022 Sequoia with tubular steel arms aimed at raised trucks. The arms are bent from 1026 DOM tubing, powder coated black, and built with caster correction so the alignment can get back into range after a lift. ICON’s own product page says the geometry is optimized for 1-3 inches of front lift over stock.

In place of a standard ball joint, each arm uses ICON’s Delta Joint, which the maker describes as having a zinc-plated housing, a grease seal and a greaseable metal-on-metal design. That matters on a truck that sees salted roads, since you can push fresh grease through the joint each season. The dual stage bushings are also serviceable, so worn rubber can be replaced without buying new arms. See the ICON 58460DJ product page for the full tech notes.

ICON notes these arms are not compatible with every subframe-drop lift or aftermarket spindle, so check your lift kit before ordering. They also make little sense on a stock-height truck. Confirm your year and setup on Amazon first.

View ICON Tubular Uppers 58460DJ on Amazon

4. TRQ Front Upper Control Arm Pair: Driver and Passenger Arms for 2000-2006 Tundra

TRQ Upper Arm Pair (2000-2006) product photo
Key features
  • Driver and passenger front upper arms
  • Listing names 2000-2006 Tundra and 2001-2007 Sequoia
  • Cross references Toyota 48610-34010 and 48630-34010
  • Sold as a direct replacement for the factory arms

First generation Tundras have fewer part choices than newer trucks, and this TRQ pair is one of the few listings that names 2000-2006 Tundra directly. It also lists the 2001-2007 Sequoia, and the kit includes both the driver and passenger front upper arms. TRQ cross references the Toyota numbers 48610-34010 and 48630-34010, along with several aftermarket part numbers, so you can match it against what is on your truck now.

By this age, the original upper bushings on many first gen trucks have cracked or gone soft, which lets the arm shift under braking and blurs the steering. Fresh arms on both sides restore the pivot points at the same time and give the alignment shop a clean starting point. TRQ describes the parts as pre-assembled and built to match the original mounting points.

The listing title and kit contents do not mention a ball joint, so read the full description and photos to see what comes attached. If the joint is not included, budget for a separate upper ball joint rather than reusing a worn one. Check your exact year and cab in Amazon’s fit tool before buying, since early and late first gen trucks can differ.

View TRQ Upper Arm Pair (2000-2006) on Amazon

curved highway with lush greenery on a cloudy day

5. Rough Country Forged Aluminum Upper Control Arms: 3.5 Inch Lift Pair for 2022-2025 Tundra

Rough Country Forged Uppers (2022-2025) product photo
Key features
  • Forged aluminum arms, sold as a pair
  • Greaseable POM ball joints
  • Listing names 2022-2025 Tundra with a 3.5 inch lift
  • Bolt-on design with no modifications

Third generation Tundras are still new to the aftermarket, and this Rough Country pair is built for 2022-2025 trucks running a 3.5 inch lift. The arms are forged aluminum, which keeps weight down at the front corners, and they ship as a matched set for both sides. The listing calls the design fully bolt-on, with no cutting or drilling at the frame mounts.

Each arm uses a POM ball joint that the maker says reduces friction, takes grease and allows more travel than the factory joint. On a lifted truck, that extra angle keeps the joint away from its limit when the suspension droops, and it gives the alignment more room to work with. Rough Country puts the installation at three to four hours, and the arms bolt to the factory mounting points.

This is a lift part, not a stock replacement. A 2022 or newer Tundra at factory height should stay with an OE-style arm, and these do not fit the 2007-2021 truck at all because the platform changed. Confirm your model year, lift height and trim on Amazon before ordering, and have the alignment checked once the arms are in and the truck has settled.

View Rough Country Forged Uppers (2022-2025) on Amazon

6. Detroit Axle Front Right Lower Control Arm with Ball Joint for 2022-2025 Tundra

Detroit Axle Lower Arm (2022-2025) product photo
Key features
  • Front right (passenger side) lower position
  • Ball joint installed on the arm
  • Listing names 2022-2025 Tundra and 2023-2025 Sequoia
  • Impact, wear and fatigue tested per the maker

Stock replacement arms for the third generation Tundra are still thin on the ground, and this Detroit Axle lower is one of the listings that names the newer truck outright. It covers the front right, or passenger side, lower position on 2022-2025 Tundra and 2023-2025 Sequoia, and the ball joint comes installed on the arm. That makes it a fit for a factory-height truck that took a pothole or curb hit on that corner.

Detroit Axle says its suspension parts go through impact, wear and fatigue testing, and the company backs this arm with a 10-year warranty according to the listing. Because the arm arrives as a complete assembly, you replace the bushings and joint together and skip pressing parts in or out. That keeps the job to unbolting the old arm and torquing the new one at ride height.

This listing is for the right side only, so check for the matching left arm if both sides are worn. It is a stock-geometry part, not meant to correct alignment on a lifted truck. Enter your Tundra’s year, cab and drivetrain on Amazon to confirm the fit, and book an alignment once the new arm is in.

View Detroit Axle Lower Arm (2022-2025) on Amazon

Matching a Listing to Your Truck

The table repeats each listing’s stated fit. Cab, drivetrain and TRD packages can still change the part.

Tundra yearsRide heightPositionListing to check
2000-2006StockFront upper pairTRQ upper pair
2007-2021StockFront left lowerMOOG RK621304
2007-2021StockFront upper pairTRQ upper pair with ball joints
2007-2021Lifted 1-3 inchFront upper pairICON tubular uppers
2022-2025Lifted 3.5 inchFront upper pairRough Country forged uppers
2022-2025StockFront right lowerDetroit Axle lower
Tundra generations, ride heights and corners matched to the control arm listings reviewed above

The opposite side has its own part number. When you replace both corners, buying the best control arms for Tundra fronts as a matching brand keeps the bushing feel and joint height even from side to side.

stunning aerial view of Sylvan Lake highway with expansive fields under a summer sky

Road Salt, Frost Heaves and Tundra Front Ends

West Michigan winters are hard on suspension hardware. Brine works into a torn ball joint boot and washes out the grease, and months of freeze-thaw cycles leave the potholes that bend arms and crack old rubber. Lower arm cam bolts on many second gen trucks also rust in place.

A look at the boots and bushings during every oil change catches most of this early. If your arms carry grease fittings, a few pumps each fall pushes old grease and trapped water out before the salt trucks start running.

detailed shot of a skateboard wheel and truck with selective focus outdoors

Check the shocks while the wheel is off. Our guide to shocks and struts for daily driving covers how to tell when they are done.

Fitting, Alignment and When to Call a Shop

Bolting in a complete arm is easier than pressing out a ball joint, but it is still safety work. The truck needs solid stands, the coilover or spring must be supported, and every bolt goes to factory torque. Tighten bushing bolts at ride height so the rubber does not sit twisted.

beautiful countryside road winding through fields

Book an alignment right after the job, since new arms shift caster and camber. Whichever of the best control arms for Tundra trucks you choose, seized cam bolts and rusted knuckles can stall a driveway repair, and our Grand Rapids suspension repair service can inspect the front end and install the parts. Tundra control arm work here is led by owner Hendrick Hoffman, who holds ASE and Michigan steering and suspension certification.

Frequently Asked Questions

Do 2007-2021 Tundra control arms fit a 2022 or newer Tundra?

No. The 2022 Tundra moved to a new platform, and its front arms have different mounting points and part numbers. Pick a listing that names your exact model year.

Do I need new upper arms for a Tundra leveling kit?

Not always. Many trucks with a small leveling spacer still align within spec on the factory uppers. Aftermarket uppers make sense when the shop cannot reach the caster or camber range, or when the upper ball joint runs close to its limit.

What should first gen Tundra owners look for in upper control arms?

Look for a listing that names 2000-2006 Tundra and states whether the ball joint is included. If it is not, plan to buy and fit a separate upper ball joint so the new arm has a fresh joint.

Should Tundra control arms be replaced in pairs?

If both sides have the same mileage and similar wear, doing them together keeps the steering even. If a pothole bent one arm and the other side checks tight, replacing only the damaged arm is a fair call.

Does your Tundra clunk over driveway lips or drift toward the shoulder on the highway? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a front suspension check on our contact page.

If daytime hours do not work for you, park the truck at 456 Carrier St NE after we close, leave it with the after-hours drop-off, and we will look it over during regular hours.