456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Equinox, Malibu or Traverse? The Best Control Arms for Chevy by Generation

best control arms for chevy: intricate macro shot of metallic bolts arranged in a spiral with selective lighting

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A knock from the front corner over every frost heave is a common complaint on Chevy crossovers and sedans once they pass six figures. Choosing the best control arms for Chevy cars starts with three facts: the model, the generation and whether you want one side or a pair.

This guide covers the Equinox, Malibu and Traverse, three popular Chevrolets that share a simple front lower arm layout. Silverado owners have their own guide, linked near the end. If you want background on the companies that make these parts first, read our overview of which control arm brands hold up.

Quick answer

Which control arm should you buy for a Chevy Equinox, Malibu or Traverse?

Buy a front lower arm with the ball joint and bushings already installed, listed for your exact generation. The Metrix pair suits a 2010-2017 Equinox, the MOOG RK620179 a 2004-2012 Malibu and the A-Premium pair a 2018-2023 Traverse. Confirm year, side and trim in Amazon’s fit checker before ordering.

Our Quick Picks

Three listings that cover the most common Chevy jobs: an Equinox pair, a single Malibu arm and a newer Traverse pair. Check year, side and trim on Amazon first.

Metrix Premium Equinox Kit product photo
Equinox pair

Metrix Premium Equinox Kit

Front lower left and right

Both front lower arms for the second-generation Equinox in one box.

Suits2010-2017 Equinox and Terrain owners
View on Amazon →
MOOG RK620179 product photo
Malibu single

MOOG RK620179

Front left lower with ball joint

One MOOG driver side arm for the older Malibu.

Suits2004-2012 Malibu owners replacing one side
View on Amazon →
A-Premium Traverse Pair product photo
Newer Traverse

A-Premium Traverse Pair

Front lower pair, pre-greased joints

A steel arm pair for the second-generation Traverse.

Suits2018-2023 Traverse and 2024 Traverse Limited owners
View on Amazon →

One Lower Arm per Side: How These Chevy Front Ends Work

Unlike a Silverado, the Equinox, Malibu and Traverse use a strut front suspension. Each front wheel hangs from a single lower control arm, and the strut takes the place of an upper arm. That keeps the parts list short: one arm per corner, with a ball joint at the outer end and two bushings where it bolts to the subframe.

On these models the rear bushing is often the first piece to give out. The rubber tears or separates, and you hear a dull clunk when braking or turning into a driveway. A ball joint with play shows up as wandering at highway speed, a loose feel in the steering or tires wearing on one edge.

Still deciding whether the arm is the culprit? Our article on control arm failure symptoms explains the noises and tire patterns to look for, and they read much the same on a Chevy as on an Audi.

Chevy Generations and the Listing Details That Matter

A model name alone will not get you the right arm. Each of these Chevrolets changed its front suspension between generations, and the arms are not interchangeable across those breaks.

  • Equinox: 2010-2017 and 2018 onward use different arms, and each generation shares its parts with the GMC Terrain of the same years.
  • Malibu: the 2004-2012 car, the 2013-2015 car and the 2016 and later car each have their own arms, and trim can matter on the newest one.
  • Traverse: the 2009-2017 model shares arms with the Acadia, Enclave and Outlook, while the 2018 and later Traverse pairs with the newer Enclave.

Your owner’s manual and the door jamb label confirm the model year and build details. Chevrolet posts its owner’s manuals and guides online if the printed copy has gone missing from the glovebox.

Best Control Arms for Chevy: Six Listings by Model and Generation

Each listing below covers a named Chevrolet and a stated range of years, and every one is a front lower arm. Enter your car in Amazon’s fit checker and read the notes under the result before you buy.

1. Metrix Premium Control Arm Kit: Front Lower Left and Right with Ball Joints for 2010-2017 Equinox

Metrix Premium Equinox Kit product photo
Key features
  • Front lower arms for both sides in one kit
  • Listed for 2010-2017 Equinox and Terrain
  • Steel arms with ball joints and bushings fitted
  • 3 year / 36,000 mile limited warranty

This Metrix Premium kit holds both front lower control arms for the second-generation Chevrolet Equinox, with the 2010-2017 GMC Terrain listed as well. The driver side arm replaces part number RK623489 and the passenger side arm replaces RK623488, which gives you two easy reference numbers to compare against a parts catalog or the arms already on the car.

Each steel arm arrives with its ball joint and bushings installed, and cotter pins are included for the ball joint nuts. That matters on this Equinox, where the rear bushing of the lower arm is a frequent source of clunks once the rubber starts to separate. Changing both sides together gives the front end matching joints and bushings, so the car does not feel tight on one corner and soft on the other. Metrix says its parts come from IATF 16949 and ISO 9001 certified plants and are made in Europe.

The warranty is 3 years or 36,000 miles from the date of installation, according to the listing. This kit is the wrong match for the 2018 and later Equinox, which uses a different arm, and it is not meant for any rear suspension position. Enter your Equinox or Terrain in Amazon’s fit checker, and plan a wheel alignment after the arms go in.

View Metrix Premium Equinox Kit on Amazon

2. TRQ Front Lower Control Arm Set: Left and Right with Ball Joints for 2018-2023 Equinox

TRQ Equinox Lower Arm Set product photo
Key features
  • Driver and passenger front lower arms
  • Listed for 2018-2023 Equinox and Terrain
  • Ball joints installed, ready to bolt on
  • Limited lifetime warranty per listing

The TRQ front lower control arm set covers the third-generation Chevrolet Equinox, which arrived for the 2018 model year, along with the 2018-2023 GMC Terrain. Inside the box are one driver side and one passenger side lower arm, each with its ball joint already in place, so both front corners can be renewed in a single job.

TRQ prints a long list of cross-reference numbers, including the GM numbers 84406463 and 84406464 and aftermarket numbers such as CMS501312 and RK624158. That list is handy when you want to match the new arm against the one coming off the car, or against a parts counter printout. The arms are pre-assembled direct replacements, so there is no ball joint to press and no bushing to install, and TRQ points owners to its library of how-to videos for planning the work.

The listing gives a limited lifetime warranty against defects in materials and workmanship, with normal wear left out. These arms do not fit the 2010-2017 Equinox, and the listing stops at the 2023 model year, so a 2024 or later Equinox needs its own fit check. TRQ asks buyers to check the Amazon Garage confirmed fit result and its compatibility chart, and an alignment should follow the installation.

View TRQ Equinox Lower Arm Set on Amazon

quiet rural road winding through lush Swedish forest

3. MOOG RK620179: Front Left Lower Control Arm and Ball Joint for 2004-2012 Malibu

MOOG RK620179 product photo
Key features
  • Front left (driver side) lower position
  • Listed for 2004-2012 Malibu
  • Also fits listed G6 and Aura years
  • Ball joint installed in the arm

The MOOG RK620179 is a front left lower control arm and ball joint assembly for the Chevrolet Malibu. The listing names the 2004-2012 Malibu, the 2005-2010 Pontiac G6 and the 2007-2009 Saturn Aura, which were built on the same platform and share this lower arm. It replaces the driver side arm only, which suits a car where one corner is worn and the other still checks tight.

On these Malibus the lower ball joint is part of the arm, so a joint with play or a torn boot normally means replacing the whole assembly. A new arm also renews the bushings, which harden and crack with age and road salt. MOOG presents the part as a way to keep the wheel alignment where it belongs and to restore steady handling, which on an older Malibu mostly comes down to a firm joint and fresh rubber.

The passenger side arm is a separate listing, the RK620180, so a full front job takes two orders. This arm is not designed for the 2013 and later Malibu, which uses a different front lower arm. Put your car into Amazon’s fit checker to confirm the year and trim, then book an alignment once the new arm is torqued at ride height.

View MOOG RK620179 on Amazon

4. Detroit Axle Front Lower Control Arms: 2 Piece Set with Ball Joints for 2016-2022 Malibu

Detroit Axle Malibu Pair product photo
Key features
  • Two front lower arms with ball joints
  • Listed for 2016-2022 Malibu (named trims)
  • Also listed for LaCrosse and Regal models
  • 10-year warranty per listing

This Detroit Axle set contains two front lower control arms with ball joints for the ninth-generation Chevrolet Malibu. The listing names the 2016-2019 Malibu in Hybrid, LT and Premier trims and the 2020-2022 Malibu, plus the 2017-2019 Buick LaCrosse without the performance package and the 2018-2020 Regal Sportback and TourX. Those cars share the same front lower arm design.

Because the listing calls out trims for the earlier years, a 2016-2019 Malibu in a trim not shown should be checked carefully before ordering. Each arm comes with its ball joint fitted, so both front corners can be finished in one visit to the garage. Detroit Axle states that its suspension parts go through impact, wear and fatigue testing, and it backs them with a 10-year warranty, which suits a daily driver you expect to keep through plenty more winters.

This set is meant for the 2016 and later car, not the 2013-2015 Malibu or the 2016 Malibu Limited, which carried over the older design. It replaces the front lower arms only and includes no tie rods or sway bar links. Confirm your trim and engine in Amazon’s fit checker, then have the alignment set after the swap.

View Detroit Axle Malibu Pair on Amazon

straight road stretches into the desert horizon under a cloud-filled blue sky

5. TRQ Front Lower Control Arm and Ball Joint Set: 4 Piece Kit with Forward Bushings for 2009-2017 Traverse

TRQ Traverse Lower Arm Set product photo
Key features
  • Two front lower arms with ball joints
  • Two front lower forward bushings included
  • Listed for 2009-2017 Traverse
  • Also fits listed Acadia, Enclave and Outlook

The TRQ four piece kit covers the first-generation Chevrolet Traverse and its platform mates. The listing names the 2009-2017 Traverse, the 2008-2017 Buick Enclave, the 2007-2016 GMC Acadia, the 2017 Acadia Limited and the 2007-2010 Saturn Outlook. In the box are two front lower control arms with ball joints and two front lower forward bushings, which accounts for the four pieces in the name.

These large crossovers are heavy, and their front lower arms carry much of that weight. Worn bushings tend to show up as a knock over bumps or a shudder under braking, while a loose ball joint brings vague steering. Including the forward bushings means the arms arrive ready to bolt in, without a separate trip for rubber parts. TRQ lists GM and aftermarket reference numbers such as 45D1906, 45D1907, 522-039 and 522-040 for cross-checking.

The listing gives a limited lifetime warranty against defects, excluding normal wear. This kit does not suit the 2018 and later Traverse, which moved to a different arm. TRQ advises checking the Amazon Garage confirmed fit result before buying, and a full alignment is the right follow-up once both arms are tightened down.

View TRQ Traverse Lower Arm Set on Amazon

6. A-Premium Front Lower Control Arms: Pair with Ball Joint and Bushing for 2018-2023 Traverse

A-Premium Traverse Pair product photo
Key features
  • Front lower left and right arms
  • Listed for 2018-2023 Traverse and 2018-2024 Enclave
  • Pre-greased ball joints, bushings fitted
  • One year, unlimited mileage warranty

A-Premium sells this pair of front lower control arms for the second-generation Chevrolet Traverse. The listing names the 2018-2023 Traverse, the 2024 Traverse Limited and the 2018-2024 Buick Enclave. Both the driver and passenger side arms are in the package, built from steel with the ball joint and bushings already installed, and A-Premium says the arms keep the original dimensions for a direct fit.

The ball joints come pre-greased, and the listing names clunking, steering wander, uneven tire wear and vibration as the problems the arms are meant to address. Reference numbers on the listing include 84177551, 84177552, CMS501308 and RK623751, which makes it easier to match the part against the arm on your Traverse or a catalog lookup. Replacing both sides at once keeps the front end balanced on a heavy three-row crossover.

The warranty is one year with unlimited mileage, which is shorter than some brands in this guide. These arms do not fit the 2009-2017 Traverse, and the redesigned 2024 Traverse is not in the listed range, only the Traverse Limited carryover. Run your vehicle through Amazon’s fit checker before ordering, and book an alignment after the installation.

View A-Premium Traverse Pair on Amazon

Matching Your Chevrolet to a Listing

The table repeats the fit each listing states. Trim and package options can still change the part.

Model and yearsPositionIn the boxListing to check
Equinox 2010-2017Front lower, both sides2 arms with ball jointsMetrix Premium kit
Equinox 2018-2023Front lower, both sides2 arms with ball jointsTRQ Equinox set
Malibu 2004-2012Front lower, driver side1 arm with ball jointMOOG RK620179
Malibu 2016-2022Front lower, both sides2 arms with ball jointsDetroit Axle Malibu pair
Traverse 2009-2017Front lower, both sides2 arms plus 2 forward bushingsTRQ Traverse set
Traverse 2018-2023Front lower, both sides2 arms with ball jointsA-Premium Traverse pair
Chevrolet Equinox, Malibu and Traverse generations matched to the front lower control arm listings reviewed above

If only one side is worn, a single arm such as the MOOG is enough. When both arms have the same mileage, a pair keeps the front end even, which is why most of the best control arms for Chevy crossovers are sold two to a box.

aerial photograph of a deserted road bending through a dry landscape

Road Salt, Potholes and Chevy Front Ends in West Michigan

Our winters are rough on lower arms. Brine sprayed from the road coats the arm and its bushings for months, and the freeze-thaw cycle each March opens potholes deep enough to bend a stamped steel arm or tear a bushing in one hit.

Look at the ball joint boot whenever the car is up for a tire rotation, since a split boot lets salty water reach the grease long before you hear a noise.

detailed close-up of a metal pipe clamp on a stainless steel surface

Struts on these cars wear at about the same pace as the arms, and a tired strut lets each pothole hit the bushings harder. Our guide to shocks and struts for daily drivers explains how to tell when yours are done, so you can plan both jobs together.

Fitting the New Arm and When a Shop Makes Sense

A complete lower arm is one of the friendlier suspension jobs, but it still holds the wheel to the car. Support the vehicle on solid stands, replace any self-locking nuts the service information calls for, and torque the bushing bolts with the suspension loaded at ride height.

long and empty desert highway with mountains under an overcast sky

Book a wheel alignment soon after, because a new arm changes the camber and toe settings and a car left out of spec will chew through tires. Seized subframe bolts often turn a driveway repair into a long weekend. When that happens, our Grand Rapids suspension repair service can inspect the front end, fit the best control arms for Chevy models that you picked and set the alignment afterward.

Frequently Asked Questions

Does a Chevy Equinox have upper control arms in front?

No. The Equinox, Malibu and Traverse use a strut front suspension, so each front wheel has a single lower control arm. Rear suspension arms are separate parts with their own listings.

Will a 2017 Equinox control arm fit a 2018 Equinox?

No. The Equinox was redesigned for 2018, and the front lower arms changed with it. Buy a listing that names your exact model year range.

Do I need an alignment after changing a lower control arm?

Yes. A new arm shifts the camber and toe slightly, and driving out of spec wears the tires unevenly. Plan the alignment for the same week as the repair.

Is your Equinox clunking over manhole covers, or does your Malibu drift on the highway? Give 456 AutoFix a call at 616-279-3832 between 8am and 5pm, Monday through Friday, or ask for a front suspension check on our contact page.

If your workday keeps you busy until closing, our after-hours drop-off lets you leave the car at 456 Carrier St NE, Grand Rapids, and we will pick the job up from there during business hours.