456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Civic, Accord or Odyssey? How to Pick the Best Ignition Coils for Honda Engines

best ignition coils for honda: detailed view of fire truck equipment

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A flashing check engine light and a shudder at idle send plenty of Honda owners shopping for a new coil. The best ignition coils for Honda engines are the ones that carry the right Honda part number, because a Civic, an Accord and an Odyssey can each use a different coil design.

Below we explain how Honda numbers its coils, how to confirm a coil is really the problem, and six listings matched to specific engine families. For the wider brand picture across every make, see our guide to matching an ignition coil brand to your factory supplier.

Quick answer

Which ignition coil should a Honda get?

Start with the Honda number printed on your old coil, then buy either the genuine Honda part or an OE-supplier coil that lists that number, such as Denso, Hitachi or Delphi. Each engine family uses its own coil, so match the engine first and the brand second.

Our Quick Picks

Three quick picks: the genuine coil for Honda's V6, a Denso coil for the 2.4L four-cylinder and a Hitachi coil for the small Fit and CR-Z engine. All six coils are reviewed below.

Genuine Honda 30520-R70-S01 product photo
Genuine V6 coil

Genuine Honda 30520-R70-S01

Genuine Honda · 30520-R70-S01 · single coil

Honda's own plug hole coil in the R70 family used on its 3.5L and 3.7L V6 engines.

SuitsLater Accord V6, Odyssey and Pilot owners
View on Amazon →
Denso 673-2313 product photo
K-series 2.4L

Denso 673-2313

Denso · 673-2313 · direct ignition coil

A Denso coil-on-plug unit for Honda's 2.4L K-series four-cylinder, from a long-time OE electrical supplier.

SuitsAccord, CR-V and Crosstour owners
View on Amazon →
Hitachi IGC0073 product photo
Fit and CR-Z

Hitachi IGC0073

Hitachi (Astemo) · IGC0073 · coil-on-plug

A Hitachi coil for Honda's small 1.5L engine, with the vehicles named in the listing title.

SuitsFit and CR-Z owners
View on Amazon →

Honda’s Coil Numbers and Who Builds Them

Honda calls its coil-on-plug units “plug hole coils” and gives them part numbers that begin with 30520. The middle group of letters points to the engine family, so 30520-RNA belongs to a different engine than 30520-R70. That number is molded or printed on the coil body, and it is the most reliable fit check you have.

Like most carmakers, Honda sources its coils from outside suppliers. Companies such as Hitachi (now sold under the Astemo name) and Denso have built them for Honda, and aftermarket makers like Delphi publish cross-reference lists that tie their part to the Honda number. A good listing prints those cross-references in its title, which lets you compare them against the coil in your hand.

Confirm the Misfire Before You Buy

A code such as P0302 tells you cylinder two misfired, not that its coil failed. The classic home test is to swap that coil with the one next door, clear the code and drive. If the misfire moves to the other cylinder, the coil is at fault; if it stays put, look at the spark plug, the injector or a compression problem.

Check the plug well while the coil is out. Engine oil pooled around the boot usually means a leaking valve cover or plug tube seal, and it will ruin a new coil’s boot if you don’t fix it first. Worn plugs also make a coil work harder, so many owners replace them during the same job.

The US Department of Energy’s fuel economy site advises drivers to address engine issues promptly and have the car inspected when the check engine light comes on. A misfiring cylinder wastes fuel and can overheat the catalytic converter, so it pays to sort it out quickly. If the car stumbles under throttle rather than at idle, our article on why a car hesitates when accelerating covers the other common causes.

Best Ignition Coils for Honda, Engine by Engine

Each coil below is tied to one Honda engine family through the part numbers its listing replaces. None of them fits every Honda, so confirm your year, model and engine with the Amazon fit checker, and compare the 30520 number on your old coil before you order.

1. Genuine Honda 30520-R70-S01: OEM Plug Hole Coil for Honda V6 Engines

Genuine Honda 30520-R70-S01 product photo
Key features
  • Genuine Honda part 30520-R70-S01
  • Coil-on-plug design, one per cylinder
  • Sold as a single coil
  • Vehicle-specific fit

This is Honda’s own plug hole coil, sold under part number 30520-R70-S01. The R70 coil family is the one widely cross-referenced to Honda’s 3.5L and 3.7L V6 engines, which sit in many later Accord V6, Odyssey and Pilot models and some Acura sedans. The Amazon listing describes it simply as a genuine OEM part with a vehicle-specific fit, and it does not print a model list, so the number on your old coil is the check that matters.

Buying the dealer part removes any question about connector shape, boot length or how the coil talks to the engine computer. It is the same design the car left the factory with, and the next technician who pulls a coil will see a Honda label. Each coil serves one cylinder, so you can replace the single cylinder that failed or buy six for a full refresh.

The rear bank of a transverse V6 sits close to the cowl, so plan a little extra time for those three coils. This coil suits owners who want a factory match and are happy to pay dealer-part money for it. It does not fit Honda four-cylinder engines or earlier V6 engines that used a different coil, so confirm your year, model and engine with the fit checker before ordering.

View Genuine Honda 30520-R70-S01 on Amazon

2. Denso 673-2313: Direct Ignition Coil for Honda Accord, Civic, CR-V and Crosstour

Denso 673-2313 product photo
Key features
  • Denso direct ignition coil
  • Listing names Accord, Civic, CR-V, Crosstour and Acura ILX
  • Tested and inspected for quality
  • Efficient design lowers the voltage it must generate

Denso is a major supplier of electrical parts to Japanese carmakers, and its 673-2313 is a direct ignition coil that sits on top of the spark plug. The listing title says it fits select years of the Honda Accord, Civic, CR-V and Crosstour and the Acura ILX. Delphi’s cross-reference for the same Honda number, 30520-R40-007, ties it to the 2.4L K-series four-cylinder found in many of those cars.

The listing keeps its claims short. Denso says each coil is tested and inspected for quality, and that improved coil efficiency reduces the need to generate high voltage. A coil that reaches the spark it needs without straining runs cooler, which helps a part that lives on top of a hot cylinder head year after year.

This is a good match for an owner who wants a supplier brand rather than a dealer box, on one of Honda’s most common engines. It is sold as a single coil, so one failed cylinder doesn’t force a full set. Honda used several K-series coils across these model years, including the different 30520-PNA family on earlier cars, so enter your exact year, model and engine in the fit checker before you buy.

View Denso 673-2313 on Amazon

picturesque snowy road winding through a winter mountain landscape with cloudy skies

3. Delphi GN10370: Ignition Coil Replacing Honda 30520-PNA-007 and 30520-RAA-007

Delphi GN10370 product photo
Key features
  • Replaces 30520-PNA-007, -PNC-004, -PZX-007
  • Also replaces 30520-RAA-007 and -RRA-007
  • OE-level spark energy, Delphi says
  • Precision manufacturing and quality control

Delphi has supplied carmakers for decades, and the GN10370 is its replacement for one of Honda’s most common early K-series coils. The listing title prints a long cross-reference list: 30520-PNA-007, 30520-PNC-004, 30520-PZX-007, 30520-RAA-007, 30520-RRA-007 and 30520-RWC-A01, along with Denso 673-2300. That family of numbers is commonly found on early 2.0L and 2.4L K-series engines, such as those in many older CR-V, Element and four-cylinder Accord models.

Delphi describes the coil in general terms. It says the design is engineered for original equipment level spark energy and smooth running, built with controlled manufacturing and quality checks, and developed for efficient voltage delivery. The listing also notes that coils bought on Amazon fall under the seller’s warranty, not Delphi’s standard limited warranty, which is worth knowing before you order.

This coil suits an owner of an older K-series Honda who wants a known brand at aftermarket cost, especially when the car has reached the mileage where coils start to fail one by one. Honda used more than one coil across these engines, so compare the number on your old coil with the list above. It won’t fit the 1.8L Civic or the V6 engines.

View Delphi GN10370 on Amazon

4. Delphi GN10324: Ignition Coil Replacing Honda 30520-RNA-A01 for 1.8L Civic

Delphi GN10324 product photo
Key features
  • Replaces Honda 30520-RNA-A01
  • Cross-references Denso 673-2305 and UF-582
  • OE-level spark energy, Delphi says
  • Sold as a single coil

The GN10324 is Delphi’s replacement for Honda coil 30520-RNA-A01, the one commonly fitted to the 1.8L four-cylinder in many 2006 to 2011 Civic models. The listing title also cross-references Denso 673-2305, Standard UF-582 and a long run of other aftermarket numbers. That list makes it easy to check the part against whatever coil is currently on your engine, even if an earlier owner already swapped one.

Delphi’s description matches the rest of its coil range. It talks about original equipment level spark energy, efficient combustion and dependable starting, and about manufacturing and quality-control processes aimed at long service life. As with the other Delphi listings here, the warranty on an Amazon purchase comes from the seller rather than Delphi itself, so check the seller details on the order.

Plenty of these Civics are still daily commuters with high mileage, and a coil that has seen 15 winters is a common source of misfires on cold mornings. This coil suits that owner well, whether you replace one cylinder or all four. It doesn’t fit the Civic Si, hybrid or later Civic engines, which use different coils, so run your exact year and trim through the fit checker first.

View Delphi GN10324 on Amazon

close-up view of a fire truck dashboard with gauges and control levers

5. Delphi GN10732: Ignition Coil Replacing Honda 30520-5A2-A01 for Direct-Injected 2.4L

Delphi GN10732 product photo
Key features
  • Replaces Honda 30520-5A2-A01
  • Cross-references Denso 673-2315 and UF-712
  • OE-level spark energy, Delphi says
  • OE-grade coil pack design

Honda’s newer direct-injected 2.4L four-cylinder uses a different coil from the earlier K-series engines, and the GN10732 is Delphi’s replacement for it. The listing title names Honda part 30520-5A2-A01 and cross-references Denso 673-2315, Standard UF-712 and several other aftermarket numbers. The 5A2 coil is commonly associated with mid-2010s Accord and CR-V models running that engine.

Delphi says the coil is engineered for original equipment level spark energy and consistent ignition, and that its design aims for efficient voltage delivery and precise spark generation. Those claims are general, so the cross-reference list is the part of the listing that does the real work. If the number on your coil appears in that list, the connector and boot should match too.

These engines are reaching the age and mileage where original coils begin to wear, and many of these cars spend their winters on salted Michigan roads. This coil suits an owner who wants an established brand without paying for the dealer part, and it is sold singly so one bad cylinder stays a small job. Because Honda also fitted 1.5L turbo engines to the same nameplates, check your year, model and engine with the fit checker before ordering.

View Delphi GN10732 on Amazon

6. Hitachi IGC0073: Ignition Coil for Honda Fit 2009-2013 and CR-Z 2011-2016

Hitachi IGC0073 product photo
Key features
  • Listing names Fit 2009-2013 and CR-Z 2011-2016
  • High turns ratio for increased voltage output
  • Internal capacitor to minimize electrical noise
  • Vehicle-specific fit

Hitachi, now sold under the Astemo name, has a long history of supplying ignition parts to Honda, and this listing is clear about fit. The IGC0073 title names the Honda Fit from 2009 to 2013 and the CR-Z from 2011 to 2016, both of which use a 1.5L four-cylinder. That makes it one of the easier coils here to match without reading cross-reference lists.

The feature list is more specific than most. Hitachi cites a high turns ratio for increased voltage output, which helps the coil fire the plug reliably, and an internal capacitor to minimize electrical noise that could interfere with other electronics. It also promises dependable energy output for efficient engine operation, the behavior you want back after a misfire.

Small Hondas like the Fit tend to rack up miles as commuter and student cars, and they often reach coil age with original parts still fitted. This coil suits that owner, sold singly so you can replace only what failed. It doesn’t fit the earlier 2007 to 2008 Fit or the 2015 and newer Fit, which use different coils, and the CR-Z hybrid system adds its own checks, so confirm your exact model year before you order.

View Hitachi IGC0073 on Amazon

Matching Each Coil to Your Honda

The engine column reflects the Honda numbers each listing replaces. Treat it as a starting point and let the number on your old coil settle the question.

CoilHonda number it matchesEngine familyTypical owner
Genuine Honda 30520-R70-S0130520-R70 series3.5L and 3.7L V6Later Accord V6, Odyssey and Pilot drivers
Denso 673-231330520-R40-0072.4L K-series four-cylinderAccord, CR-V and Crosstour owners
Delphi GN1037030520-PNA-007 and othersEarly 2.0L and 2.4L K-seriesOlder CR-V, Element and Accord owners
Delphi GN1032430520-RNA-A011.8L four-cylinder2006-2011 era Civic owners
Delphi GN1073230520-5A2-A01Direct-injected 2.4LNewer Accord and CR-V owners
Hitachi IGC0073Listing names Fit and CR-Z1.5L four-cylinderFit and CR-Z owners
Six Honda ignition coils compared by the Honda number they replace and the engine family they serve
captivating view of a winding road through Troodos mountains

Cold Starts, Plug Wells and Timing Belt Visits

A coil with a hairline crack in its housing often runs fine on a warm afternoon and then misfires on a damp, freezing Grand Rapids morning. Moisture finds the crack, the spark tracks to ground and the engine shakes until it warms up. Humid summer storms can cause the same thing, so a misfire that comes and goes with the weather points toward a coil or boot.

One coil or all of them? On a high-mileage engine with original coils, replacing the whole set at once saves pulling the cover again in a few months. On a newer car, or when only one coil has failed after a known cause such as oil in the well, a single coil is a sensible fix. Whichever route you take, the best ignition coils for Honda engines won’t cure a misfire caused by a worn plug, so check the plug interval in your owner’s manual too.

detailed view of complex industrial machinery parts and metal pipes

Honda’s V6 engines in the Accord, Odyssey and Pilot use a timing belt that is usually replaced along with the water pump and tensioner. If your Maintenance Minder shows the belt is close, the visit is a good moment to deal with tired coils and plugs as well. Our comparison of complete timing belt kit brands and what they include explains the parts involved, and our timing belt replacement service in Grand Rapids handles the job on Honda V6 engines.

snow tractor equipped for urban street cleaning clears a snowy path in the city

When the swap test doesn’t point to a coil, or the light is flashing, it is time for a proper diagnosis rather than another part. Our check engine light diagnostic service reads the codes, checks misfire counts by cylinder and tests the coils, plugs and injectors before anything gets replaced.

Frequently Asked Questions

Are aftermarket ignition coils OK on a Honda?

Yes, when the coil lists your exact Honda part number. OE suppliers such as Denso and Hitachi, and established brands such as Delphi, publish cross-references to the 30520 number. Unbranded multipacks that only name models are harder to trust.

What are the best ignition coils for Honda Civic models?

It depends on the engine. Many 2006 to 2011 Civics with the 1.8L engine use coil 30520-RNA-A01, which the Delphi GN10324 replaces. Newer Civics use other coils, so read the number on yours first.

Which coil fits a Honda Odyssey or Accord V6?

Later 3.5L V6 Accord, Odyssey and Pilot models commonly use the 30520-R70 coil, sold as the Genuine Honda 30520-R70-S01. Earlier V6 engines used different coils, so confirm your year and engine before ordering.

Should I replace all the coils or just one?

Replace only the failed coil if the car is fairly new or the failure had a clear cause, such as oil in the plug well. On a high-mileage engine still running its original coils, a full set saves a second job later.

Is your Honda shaking at idle or showing a misfire code you can’t pin down? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a misfire diagnosis through our contact page.

If weekdays are packed, bring the car to 456 Carrier St NE whenever it suits you and leave it with our after-hours drop-off.