456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Coil Rail or Distributor? The Best Ignition Coil for Jeep 4.0 Engines

best ignition coil for jeep 4.0: intense close-up of a lighter igniting a bright flame with spark effects against a dark background

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

The 4.0L inline six is the engine many Jeep owners refuse to give up, and its ignition parts are cheap and easy to reach. The catch is that Jeep changed the ignition system partway through the engine’s life, so the best ignition coil for Jeep 4.0 engines depends first on your model year, then on the part number the listing replaces.

This guide explains the two coil designs, how to read the part number off your old coil, and six listings that name the 4.0 or its factory part number. For coil brands across other makes, see our comparison of ignition coil brands and who builds factory parts.

Quick answer

Which ignition coil does a Jeep 4.0 need?

Most 2000 to 2006 Wranglers, 2000 and 2001 Cherokees and 2000 to 2004 Grand Cherokees use a coil rail that replaces 56041476AA or AB. NGK, Delphi and Omix-Ada all list one. Earlier distributor-ignition Jeeps take a single canister-style coil instead, so check your year and part number first.

Our Quick Picks

Three listings that cover the main 4.0 Jeeps: a TJ coil rail, a part-number match for the WJ and XJ, and a distributor coil for the 90s Cherokee.

NGK Jeep TJ 4.0L Coil Rail product photo
Wrangler TJ pick

NGK Jeep TJ 4.0L Coil Rail

Coil rail | 4.0L L6 | 2000-2006

An NGK-branded coil rail listed for the TJ Wrangler.

SuitsTJ owners chasing a paired-cylinder misfire
View on Amazon →
Delphi GN10529 Coil product photo
Part-number match

Delphi GN10529 Coil

Coil rail | 56041476AA/AB | UF-293

Delphi's rail coil, sold by part number for the 4.0 Jeeps.

SuitsXJ, TJ and WJ owners who match parts by number
View on Amazon →
Omix-ADA 17247.04 Coil product photo
Pre-2000 XJ pick

Omix-ADA 17247.04 Coil

Distributor coil | 5234210 | 1991-1997

A replacement coil for the distributor-era Cherokee.

Suits90s XJ owners with a no-spark problem
View on Amazon →

Two Ignition Systems Under One Engine Name

From the early 1990s until the late 1990s, the 4.0 fired its plugs through a distributor. One coil, usually bolted to a bracket on the side of the engine, sent spark up a coil wire to the cap and rotor, which handed it to six plug wires.

The 1999 Grand Cherokee switched to a distributorless coil rail, and the Wrangler and Cherokee followed for 2000. The rail is one bolt-on assembly that holds three coils, each firing two cylinders at once in a waste spark pair. On the inline six those pairs are 1 and 6, 2 and 5, and 3 and 4.

That pairing gives you a useful clue. When one coil inside the rail weakens, the misfire codes often show up on a matching pair of cylinders rather than a random one.

Reading the Part Number Before You Order

Model names won’t get you all the way there. A 1999 Wrangler and a 1999 Grand Cherokee share the same engine size but not the same ignition parts, and the 1999 Grand Cherokee rail carries a different number from the 2000 to 2004 rail. Before you click buy, run through these checks:

  • Engine code: the eighth VIN character identifies the engine, and the 4.0 is commonly coded S.
  • Old coil label: the factory rail is stamped with a Mopar number such as 56041476AA or AB, and aftermarket boxes cross-reference it.
  • Coil style: a canister or square coil with one tower means distributor ignition; a long plastic rail across the valve cover means coil rail.
  • Fit checker: enter year, model and engine on the Amazon listing before checkout.

The listings below repeat only the vehicles or part numbers that each seller states. None of them covers every 4.0 ever built, so confirm year, model and engine on Amazon before buying.

Best Ignition Coil for Jeep 4.0: Six Listings Reviewed

Five are coil rails for the 2000s Jeeps; the last is a distributor coil for the 1991 to 1997 Cherokee.

1. NGK Ignition Coil: Coil Rail for Wrangler TJ 4.0L 2000-2006

NGK Jeep TJ 4.0L Coil Rail product photo
Key features
  • Listed for 2000-2006 Jeep TJ 4.0L L6
  • Sold as genuine NGK parts
  • Original packaging and hardware
  • Direct replacement design

This listing is an NGK ignition coil for the Jeep TJ with the 4.0L inline six, covering model years 2000 through 2006. The seller describes it as a genuine NGK part supplied in original packaging with its hardware, built as a direct replacement for the factory coil. NGK is best known for spark plugs, and its coil line is engineered around the original fit and connector of each application.

On the TJ, the coil rail bolts across the top of the valve cover and fires all six cylinders through three internal coils. When one of those coils weakens, the Wrangler tends to misfire on a matched pair of cylinders, idle roughly and feel flat climbing hills. Replacing the rail with a known brand restores even spark to every cylinder without changing any wiring, and it is a job most owners can handle with basic hand tools.

The fit is narrow on purpose. This listing names the TJ Wrangler and the 4.0L engine, not the 2.4L or 2.5L four-cylinder, which use different ignition parts. For a TJ 4.0, run your year through Amazon’s Confirmed Fit before ordering. Cherokee and Grand Cherokee owners should look at the part-number listings below instead.

View NGK Jeep TJ 4.0L Coil Rail on Amazon

2. Delphi GN10529 Ignition Coil: Replaces 56041476AA, AB and UF-293

Delphi GN10529 Coil product photo
Key features
  • Cross-references 56041476AA and 56041476AB
  • Also lists 56041019 and UF-293
  • OE-level spark output design
  • Seller handles the warranty on Amazon

Delphi sells the GN10529 by part number rather than by vehicle. Its listing says it replaces Mopar 56041019, 56041476AA and 56041476AB, along with the aftermarket numbers UF-293 and UF-296. Those are the coil rail numbers used on 4.0L Jeeps once the distributor was dropped, which makes this one of the few listings that also covers the earlier rail on the 1999 Grand Cherokee.

Delphi describes its coils as engineered for original-equipment-level performance, with a design aimed at efficient voltage delivery and steady spark. For a Jeep owner, that means a rail that should bolt on in the factory location and bring all three coils back to full output at once. It suits anyone who has already read the number on the old coil and wants a well-known supplier behind the replacement.

Two points deserve attention. The listing does not name vehicles, so confirm your Jeep, year and the 4.0L engine with Amazon’s fit checker, or match the number stamped on your old rail. Delphi also notes that coils bought on Amazon fall under the seller’s warranty, not Delphi’s standard limited warranty, so check who the seller is before ordering.

View Delphi GN10529 Coil on Amazon

serene winter scene of a snow-covered countryside road bordered by leafless trees under soft sunlight

3. Omix-Ada 17247.19 Ignition Coil: OE 56041476AA for 2000-2006 Jeep 4.0L

Omix-Ada 17247.19 Coil product photo
Key features
  • OE reference 56041476AA
  • Listed for Cherokee, Wrangler and Grand Cherokee 4.0L
  • Jeep-focused parts brand
  • Limited 5-year warranty

Omix-Ada focuses its catalog on Jeep replacement parts, and its 17247.19 is the coil rail for the 4.0L inline six. The listing gives the original equipment reference as 56041476AA and names the Cherokee, Wrangler and Grand Cherokee with the 4.0L for model years 2000 through 2006. The listing also states a limited five-year warranty, which is longer than many budget rails offer.

Because the brand centers on Jeeps, its listings line up neatly with the way 4.0 owners search for parts. The coil replaces the whole factory rail, so all three internal coils are new together, and the plug wire connections stay where they were. That suits an owner who keeps an older XJ or TJ on the road for trail weekends and wants a replacement from a brand whose whole catalog is organized around Jeep models and years.

Read the year range carefully. The Cherokee XJ ended in 2001 and the Grand Cherokee WJ in 2004, so the 2006 date applies to the Wrangler. Confirm year, model and the 4.0L engine on Amazon before ordering, and choose a different coil for a 1999 Grand Cherokee, which used the earlier rail design.

View Omix-Ada 17247.19 Coil on Amazon

4. MSD 82738 Ignition Coil: Red Bolt-In Coil Pack, Replaces 56041476AA and AB

MSD 82738 Coil product photo
Key features
  • Replaces 56041476AA and 56041476AB
  • Direct bolt-in factory location
  • Meets or exceeds OE specifications
  • Red housing, limited 1-year warranty

MSD is a performance ignition brand, and its 82738 is a red coil pack that the listing says replaces Chrysler and Jeep part numbers 56041476AA and 56041476AB. MSD describes it as a direct bolt-in replacement in the factory location that meets or exceeds original equipment specifications, so no brackets, adapters or rewiring should be needed.

This choice makes the most sense on a 4.0 that has been opened up with an aftermarket intake, a header or a regear, where an owner prefers a performance brand throughout the ignition system. The bright red housing is also easy to pick out under the hood. On a stock engine, the MSD clears a coil misfire in the same way a factory-style rail does, so the reason to choose it is the brand and finish more than a change in how the Jeep drives.

Fit is stated by part number only. If your old rail is stamped 56041476AA or AB, this coil is the matching type, and Amazon’s Confirmed Fit should confirm the year and 4.0L engine. Pair it with fresh plugs and good wires, because a strong coil cannot fix a worn plug gap.

View MSD 82738 Coil on Amazon

crop anonymous male in black shirt holding bright burning lighter in dark room

5. ENA Ignition Coil Pack: UF296 Replacement for Jeep 4.0L L6

ENA 4.0L Coil Pack product photo
Key features
  • Cross-references UF296 and 56041476AA/AB
  • Listed for Cherokee, Grand Cherokee and Wrangler 4.0L
  • 4 terminals, bolt-on mount, 12V
  • Set of one, 12-month warranty

ENA’s coil pack is an aftermarket replacement for the 4.0L coil rail. The listing cross-references UF296, 56041476AA, 56041476AB and 68247208AA, and its fitment bullets name the 2000 and 2001 Cherokee, the 2000 to 2004 Grand Cherokee and the 2000 to 2006 Wrangler and TJ, all with the 4.0L inline six. It ships as a single coil pack, which is the whole rail, with a 12-month warranty according to the listing.

The specifications are spelled out plainly: four terminals, a bolt-on mount and 12-volt operation, which match the factory rail’s electrical connector and mounting. That level of detail helps when you’re comparing the box against the part you just removed. It suits a high-mileage Jeep used as a winter beater or a second vehicle, where the goal is a working ignition system rather than a premium brand.

The title lists the Grand Cherokee from 2001 while the bullets start at 2000, so trust the fit checker over either line. Confirm your year and 4.0L engine in your Amazon Garage first. If you plan to keep the Jeep for many more years, a supplier-brand rail such as the NGK or Delphi is worth comparing.

View ENA 4.0L Coil Pack on Amazon

6. Omix-ADA 17247.04 Ignition Coil: Distributor Coil for 1991-1997 Jeep Cherokee XJ

Omix-ADA 17247.04 Coil product photo
Key features
  • Listed for 1991-1997 Jeep Cherokee XJ
  • OE reference 5234210
  • Distributor ignition coil
  • Limited 5-year warranty

Older Cherokees use a different coil altogether, and this Omix-ADA 17247.04 is built for them. The listing names the 1991 to 1997 Jeep Cherokee XJ and gives the original equipment reference as 5234210, the coil used with distributor ignition in those years. It comes with a limited five-year warranty, according to the listing, and the OE number makes cross-checking against your old coil simple.

On these Jeeps a single coil feeds the distributor, which then sends spark to each cylinder through the cap, rotor and plug wires. A failing coil tends to cause hard starts, stalling when hot or a sudden no-spark condition rather than a single-cylinder misfire. Replacing it is a short job with a couple of wire connections and a mounting bracket, and it pairs naturally with a new cap and rotor if those are worn or cracked.

This listing names the XJ by years, not by engine, and the Cherokee was also sold with a four-cylinder. For a 4.0L XJ, check the coil against your old part number and confirm year and engine on Amazon. Wranglers and Grand Cherokees from the same decade may need a different coil, so read the old label first.

View Omix-ADA 17247.04 Coil on Amazon

Which Coil Fits Which 4.0 Jeep

Treat this table as a starting shortlist, then put your own VIN details into the fit checker.

Jeep and yearsIgnition typePart to matchListings above
Wrangler TJ 2000-2006Coil rail56041476AA / ABNGK, Delphi, Omix-Ada 17247.19, MSD 82738, ENA
Cherokee XJ 2000-2001Coil rail56041476AA / ABDelphi, Omix-Ada 17247.19, MSD 82738, ENA
Grand Cherokee WJ 2000-2004Coil rail56041476AA / ABDelphi, Omix-Ada 17247.19, MSD 82738, ENA
Grand Cherokee WJ 1999Coil rail, earlier design56041019 / UF-293Delphi GN10529 lists this number
Cherokee XJ 1991-1997Distributor5234210Omix-ADA 17247.04
Best ignition coil for Jeep 4.0 models, matched to the part numbers each Amazon listing states.

Jeeps not in the table, such as the 1998 and 1999 Wrangler and Cherokee or the Grand Cherokee ZJ, use distributor coils not reviewed here, so search by the number on your old coil.

aerial shot of a winding road through a snowy forest landscape creating a striking contrast

Cold Starts, Salt and a Tired Coil Rail

Delphi’s ignition coil engineering page names vibration, temperature changes and failing spark plugs as the stresses that break coil wiring or let energy escape through the insulation. A 4.0 Jeep gets all three, from trail vibration to valve cover heat and aging plugs.

West Michigan adds its own load. A January cold start asks for more voltage, and salty slush thrown up from Grand Rapids streets finds its way onto the plug boots and wires. A cracked boot or a corroded terminal gives spark an easy path to ground, which often shows up as a stumble on damp mornings that clears once the engine warms.

glowing matchstick with bright flame against a dark background

When you fit a new rail, look at the plugs and the short plug wires at the same time. Worn plugs with wide gaps make the new coil work harder. A thin film of dielectric grease inside the boots helps keep moisture out, unless the coil maker says otherwise.

Rule Out These Problems Before Buying a Coil

A misfire code is a symptom, not a diagnosis. Worn plugs, a cracked plug wire, a leaking injector, a vacuum leak at the intake gasket or low compression can all set the same P0300 series codes. On distributor Jeeps, a worn cap and rotor fail far more often than the coil itself.

winding road through a foggy and snowy winter landscape

If the Jeep bogs or stumbles under throttle instead of shaking at idle, our guide to why a car hesitates when accelerating covers the fuel and sensor causes as well. A flashing check engine light means a live misfire that can overheat the catalytic converter, so park it. Our check engine light diagnostic in Grand Rapids reads the codes and tests the coil, plugs and wiring on the affected cylinders.

The 4.0 drives its camshaft with a timing chain rather than a belt, and a stretched chain on a very high-mileage engine can upset ignition timing. Our timing belt and chain service in Grand Rapids handles both kinds. If your other vehicle has a belt-driven engine, the roundup of timing belt kit brands and what each kit contains explains the parts.

Frequently Asked Questions

Can one part of the Jeep 4.0 coil rail fail on its own?

Yes. The rail holds three separate coils, and one can weaken while the other two keep working. That usually shows as misfires on a pair of cylinders, such as 1 and 6, but the fix is still a complete new rail.

What is the best ignition coil for Jeep 4.0 Wrangler TJ models?

For a 2000 to 2006 TJ, any coil rail that replaces 56041476AA or AB is the right type. NGK and Omix-Ada list the TJ by name, and Delphi lists the part number. Confirm your year and engine on Amazon first.

Is an MSD coil worth it on a stock 4.0?

MSD lists its 82738 as a direct bolt-in replacement that meets or exceeds the original specifications. On an unmodified daily driver, a factory-style rail fixes the misfire just as well. The MSD makes more sense if you want a performance brand on a built engine.

Should I change spark plugs with a new coil?

It’s a good idea if the plugs are near their interval or you don’t know their age. Worn plugs raise the voltage the coil has to produce, which shortens the life of a new rail.

Jeep still stumbling after a new coil rail, or not sure whether your 4.0 has a distributor or a rail? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or book a misfire diagnosis on our contact page.

If your day doesn’t leave room for a weekday visit, drive the Jeep to 456 Carrier St NE in Grand Rapids and leave it in our after-hours drop-off for us to start on.