456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Elantra, Sonata or Santa Fe? Choosing the Best Ignition Coils for Hyundai Engines

best ignition coils for hyundai: clear blue sky over a green hilly landscape with a dirt road winding through it

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A flashing check engine light and a shudder at idle send plenty of Elantra, Sonata and Santa Fe owners looking for the best ignition coils for Hyundai engines. The catch is that Hyundai has built several engine families over the past fifteen years, and each one takes its own coil with its own part number. A coil that bolts onto a 2014 Elantra will not plug into a 2019 one.

This guide matches coils to engines, shows how to confirm the coil is at fault, and reviews six listings that each name a Hyundai part number. For a wider look at who makes coils and how factory suppliers compare with aftermarket brands, see our guide to the best ignition coil brand for your car.

Quick answer

Which ignition coil does your Hyundai need?

Choose the coil by engine code rather than by model name. A 2011 to 2016 Elantra 1.8L takes the 27300-2E000 coil, such as the NGK U5257. A 2016 to 2019 Sonata 2.4L suits the Delphi GN10730 set, and the 3.3L or 3.8L V6 uses the 27301-3C000 coil. Confirm year, engine and part number first.

Our Quick Picks

Three coils that cover the most common Hyundai engines, from the earlier Elantra 1.8L to the V6 Santa Fe. Three more for other engines are reviewed below.

NGK U5257 product photo
Earlier Nu 1.8L / 2.0L

NGK U5257

Replaces 27300-2E000 · single coil

NGK's direct replacement for the coil used on many 2011 to 2016 Elantras and the 2.0L Tucson.

SuitsElantra 1.8L, Tucson 2.0L
View on Amazon →
Delphi GN10730 (4-pack) product photo
Theta II 2.4L GDI

Delphi GN10730 (4-pack)

Delphi GN10730 · set of 4

A full four-coil set for the direct-injected 2.4L in the later Sonata, Santa Fe Sport and Tucson.

SuitsSonata 2016-2019
View on Amazon →
Genuine Hyundai 27301-3C000 product photo
Lambda V6 (factory part)

Genuine Hyundai 27301-3C000

Hyundai 27301-3C000 · single coil

The factory coil for many V6 Santa Fe, Sonata and Genesis models.

SuitsSanta Fe 3.3L, Genesis 3.8L
View on Amazon →

Start With the Engine Under Your Hood

Hyundai and Kia share engines across many models, so one coil part number often covers an Elantra, a Tucson and a Kia Forte. The model name alone tells you very little.

These are the engine families the picks below cover:

  • Nu 1.8L and 2.0L (earlier): found in many 2011 to 2016 Elantras and the 2.0L Tucson. Hyundai part 27300-2E000.
  • Nu 2.0L (later): found in the 2017 to 2020 Elantra, the Kona 2.0L and the 2019 to 2021 Veloster 2.0L. Hyundai part 27300-2E601, a different connector and mount.
  • Theta II 2.4L GDI: found in the 2016 to 2019 Sonata, the Santa Fe Sport and the later Tucson 2.4L.
  • Lambda 3.3L and 3.8L V6: found in V6 Santa Fe, Sonata and Genesis models. Hyundai part 27301-3C000.
  • Gamma 1.6L: found in the Accent and the non-turbo Veloster. Hyundai part 27301-2B100.

Your engine size is printed in the owner’s manual and on the emissions label under the hood, and the eighth character of the VIN identifies the engine. If you no longer have the manual, Hyundai posts owner’s manuals and warranty booklets on its MyHyundai manuals and warranties page. The 2011 to 2014 Sonata 2.4L uses yet another coil, 27300-2G000, which is not on this list.

Prove the Coil Is the Culprit

A misfire code such as P0302 tells you which cylinder is missing, not why. Worn spark plugs, a leaking injector, a vacuum leak and low compression can all set the same code. Our guide to the best scan tool for Hyundai owners covers scanners that show live misfire counts.

On coil-on-plug engines like these, the classic check is a swap test. Move the suspect coil to a neighboring cylinder, clear the code and drive. If the misfire follows the coil to the new cylinder, the coil is bad; if it stays put, look at the plug, injector or compression instead.

Pull the spark plug while you are in there. A plug worn past its interval makes a coil work harder, and many coil failures follow old plugs. A stumble under load can also come from fuel delivery or sensor faults, which our article on why a car hesitates when accelerating walks through.

Best Ignition Coils for Hyundai: Six Coils Matched by Engine

Each listing below names the Hyundai part number or engine it replaces. Treat the year ranges as a starting point, because catalogs disagree at the edges, and check the part number against your VIN before you order.

1. NGK U5257 (48871): Coil-On-Plug Ignition Coil Replacing Hyundai 27300-2E000

NGK U5257 product photo
Key features
  • Replaces Hyundai 27300-2E000 and UF-651
  • Custom NGK ASIC chipset
  • Tested in an ISO 17025 certified lab
  • OEM form, fit and function

The NGK U5257 is a single coil-on-plug unit built to replace Hyundai part 27300-2E000. That number covers the earlier Nu family of four-cylinder engines, which parts catalogs list for most 2011 to 2016 Elantra 1.8L models, the 2.0L Tucson from about 2014, the 2.0L Elantra GT and several Kia models with the same motor. The listing also cross-references UF-651 and Delphi GN10633, which helps if you are matching an old receipt.

NGK says it designs the coil around its own ASIC chipset, a small control circuit that manages charging of the coil and protects the engine computer’s driver circuit. The windings use electrical steel lamination, the housing uses a heat-resistant dielectric plastic, and NGK tests the coils in an ISO 17025 certified lab. In practice, it plugs in and bolts down exactly like the original.

This is a sensible pick when one cylinder on an older Elantra or Tucson is misfiring and the swap test points at the coil. It is sold as one coil, so a full set means ordering four. It does not fit the 2017 and later Elantra 2.0L, which uses the 27300-2E601 coil, so confirm your year, engine and part number before buying.

View NGK U5257 on Amazon

2. A-Premium 273002E601: Ignition Coil for Hyundai Elantra 2.0L, Kona and Veloster

A-Premium 273002E601 product photo
Key features
  • Replaces Hyundai 27300-2E601
  • 4-pin connector, bolt-on valve cover mount
  • Cross-references UF-816 and GN10877
  • Listed for Elantra 2015-2020 2.0L

A-Premium’s 273002E601 coil replaces Hyundai part 27300-2E601, the coil Hyundai moved to on the later Nu 2.0L engine. The listing names the Elantra 2.0L built from December 2015 through 2020, the Kona 2.0L from 2018 to 2021, the 2019 to 2021 Veloster 2.0L and several hybrid Sonata and Kia applications. That split matters, because many Elantra owners order the older 2E000 coil by mistake.

It uses a four-pin connector and bolts to the valve cover, matching the factory layout. The listing cross-references Standard UF-816, Delphi GN10877 and Hitachi IGC0206, so you can compare it with those numbers if you see them in a parts catalog. A-Premium is an aftermarket brand that sells a wide range of replacement parts rather than an original equipment supplier.

This coil makes sense for owners of a later Elantra or Kona who want a replacement that names their engine and part number clearly. It is sold as a single coil, so plan on four for a complete set. If you would rather stay with a factory supplier, compare the cross-referenced Delphi or Hitachi numbers, and confirm the build month of your Elantra before you order.

View A-Premium 273002E601 on Amazon

curved dirt road amidst arid landscape with towering mountains under a blue sky

3. Delphi GN10730 Ignition Coil (Pack of 4): Coil Set for Hyundai Theta II 2.4L GDI

Delphi GN10730 (4-pack) product photo
Key features
  • Pack of four coil-on-plug coils
  • Listed for 2016-2019 Sonata 2.4L
  • Also listed for Santa Fe Sport and Tucson 2.4L
  • Built to original equipment specifications

Delphi’s GN10730 comes as a pack of four coils for the Theta II 2.4L direct-injection engine. Parts catalogs list it for the 2016 to 2019 Sonata 2.4L, the 2017 and 2018 Santa Fe Sport and the 2018 to 2021 Tucson 2.4L, along with Kia Optima, Sorento and Sportage models that share the engine. Some catalogs add 2.0L turbo applications as well, so the engine code is worth checking.

Delphi is a long-standing original equipment supplier, and it builds its replacement coils to original equipment specifications. Buying four in one box suits the common approach of replacing every coil at once on a high-mileage engine. It also means you end up with four coils from the same production run rather than one new coil next to three old ones.

This set suits a Sonata or Tucson owner who is already changing spark plugs and wants all the coils done at the same visit. It is not the coil for the 2011 to 2014 Sonata 2.4L, which uses a different part. Catalog sources disagree on a few models, so confirm your year, engine and VIN against the listing before you order.

View Delphi GN10730 (4-pack) on Amazon

4. Genuine Hyundai 27301-3C000: OEM Ignition Coil Assembly for Lambda 3.3L and 3.8L V6

Genuine Hyundai 27301-3C000 product photo
Key features
  • Authentic Hyundai OEM part
  • Direct fit for listed V6 engines
  • Part number 27301-3C000
  • Vehicle-specific fit

This is Hyundai’s own 27301-3C000 coil assembly, the original part for the Lambda family of 3.3L and 3.8L V6 engines. Hyundai’s parts listings name V6 versions of the Santa Fe across many years, the 2005 to 2010 Sonata V6 and the 2008 to 2016 Genesis and Genesis Coupe. Kia used the same V6 in models such as the Sorento and Sedona.

Buying the genuine part removes any doubt about connector shape, boot length or mounting tab, because it is the same coil the engine left the factory with. That can matter on a V6, where the rear bank coils are harder to reach and nobody wants to do the job twice. It is sold as a single coil assembly.

Choose this coil if you want factory parts on a V6 Hyundai, especially for a rear-bank cylinder that is awkward to reach. If you are replacing all six, the cost of six genuine coils adds up, and the Standard Motor Products UF546 below cross-references the same number. Either way, confirm the part number against your VIN, since some later direct-injected V6 engines use different coils.

View Genuine Hyundai 27301-3C000 on Amazon

close-up of metallic screws on a vibrant green surface

5. Standard Motor Products UF546: Intermotor Coil-On-Plug Coil for Hyundai 3.3L and 3.8L V6

Standard Motor Products UF546 product photo
Key features
  • Cross-references Hyundai 27301-3C000
  • Coil-on-plug design
  • Intermotor line from Standard Motor Products
  • Fits listed Hyundai and Kia V6 engines

Standard Motor Products sells the UF546 under its Intermotor line as a replacement for Hyundai part 27301-3C000. Parts catalogs list it for the same Lambda 3.3L and 3.8L V6 engines as the genuine coil above, including V6 Santa Fe, Sonata, Azera and Genesis models, plus Kia V6 applications such as the Sorento and Sedona. The cross-reference makes it easy to compare against the number printed on your old coil.

Standard Motor Products is a long-established American maker of ignition and engine management parts that sells through most parts counters. The UF546 is a single coil-on-plug unit that connects and mounts in the factory position. Because it shares the Hyundai part number, it gives V6 owners an aftermarket route to the same fit.

This coil suits owners replacing several V6 coils at once who want a recognized brand rather than an unbranded kit. It is also a reasonable choice when one front-bank coil fails and you want a matching spare. As with any V6 coil, check the part number against your VIN, and inspect the boots and plug tubes for oil while the coils are out.

View Standard Motor Products UF546 on Amazon

6. Genuine Hyundai 27301-2B100: OEM Ignition Coil Assembly for Gamma 1.6L Accent and Veloster

Genuine Hyundai 27301-2B100 product photo
Key features
  • Authentic Hyundai OEM part
  • Part number 27301-2B100
  • Direct fit for listed 1.6L engines
  • Sold as a single coil

Hyundai’s 27301-2B100 is the factory coil for the Gamma 1.6L four-cylinder used in the Accent and the non-turbo Veloster, along with the Kia Rio and Soul 1.6L. Parts listings usually place it on Accents from about 2012 and Veloster 1.6L models from 2012 to 2017, though the exact years vary between sources. Turbocharged Veloster models are not part of that range.

As a genuine part it matches the original connector, boot and bolt tab, which takes the guesswork out of fitting. Hyundai’s parts sellers note that it comes as one coil, not a set, so a full replacement on the four-cylinder means four of them. The 1.6L is a compact engine, and the coils come out with basic hand tools on most model years.

This coil is a good fit for an Accent or Veloster owner chasing a single-cylinder misfire who wants the factory part rather than a mixed-brand kit. Owners on a tight budget replacing all four may prefer an aftermarket set that cross-references 27301-2B100. Confirm your year, engine and VIN before ordering, because sources disagree on where the range ends.

View Genuine Hyundai 27301-2B100 on Amazon

Coil Match Chart by Hyundai Engine

CoilHyundai part replacedEngine familySold as
NGK U525727300-2E000Nu 1.8L and 2.0L, earlierSingle coil
A-Premium 273002E60127300-2E601Nu 2.0L, laterSingle coil
Delphi GN10730Theta II GDI coil2.4L GDI (also some 2.0L)Pack of 4
Genuine Hyundai 27301-3C00027301-3C000Lambda 3.3L and 3.8L V6Single coil
Standard Motor Products UF54627301-3C000Lambda 3.3L and 3.8L V6Single coil
Genuine Hyundai 27301-2B10027301-2B100Gamma 1.6LSingle coil
Part numbers and engines as each listing or parts catalog states them. Year ranges vary by source, so check your VIN before ordering.

Read the chart from the middle column out. Once you know the Hyundai part number your engine uses, the best ignition coils for Hyundai models are simply the ones that match it from a maker you trust. A V6 owner has the clearest choice: the same coil from Hyundai or from Standard Motor Products.

serene night view of a lit highway

Cold Mornings, Wet Plug Tubes and Michigan Miles

A weak coil often shows itself first on a cold start. In a West Michigan January the engine cranks slower, the mixture runs rich and a tired coil that coped all summer starts to miss.

Oil is the other enemy. A leaking valve cover gasket or spark plug tube seal lets oil pool around the coil boot, which softens the rubber and can let the spark track to ground. Replacing coils without fixing that leak usually means buying them again, so look down each plug well when you pull a coil.

happy child runs on a country path through lush greenery with mountains in the background

When shopping for the best ignition coils for Hyundai cars that see salty, wet roads, a good boot seal matters as much as the coil itself. Check that new coils come with intact boots and seat them fully.

When a Misfire Needs a Mechanic

A flashing check engine light means a misfire bad enough to overheat the catalytic converter, so ease off and get it looked at soon. Our article on a check engine light flashing explains why that matters. If a new coil does not cure the miss, our check engine light diagnosis in Grand Rapids traces it to the real cause.

breathtaking aerial view of a winding road through lush green hills in a mountainous region

Most of the Hyundai engines above use a timing chain, though the older 2.7L V6 runs a belt. A misfire that comes with a rattle at startup, or one that appears after a belt has slipped a tooth, points deeper than the ignition system. Our timing belt and chain replacement in Grand Rapids covers both, and if you plan the belt job yourself, compare kits in our guide to the best timing belt kit brands.

Frequently Asked Questions

What are the best ignition coils for Hyundai Elantra models?

It depends on the year. Most 2011 to 2016 Elantras with the 1.8L or 2.0L take the 27300-2E000 coil, such as the NGK U5257. The 2017 to 2020 Elantra 2.0L uses 27300-2E601, a different coil. Check the part number for your VIN before ordering.

Should I replace one Hyundai ignition coil or all of them?

One coil fixes a single failed cylinder. On a high-mileage engine, many owners replace the full set with new plugs, since the other coils have the same age and heat cycles behind them.

Are genuine Hyundai coils better than aftermarket ones?

Genuine coils match the original exactly, which removes any fitment doubt. Established aftermarket makers such as NGK, Delphi and Standard Motor Products build coils to the same part numbers and are a sound choice when the cross-reference matches your engine.

Why do Hyundai ignition coils keep failing?

Repeat failures usually have a cause outside the coil. Oil leaking into the spark plug tubes, worn plugs and cracked boots are the common ones. Fix the leak and replace old plugs, or the new coil may fail the same way.

Is your Hyundai running rough or flashing a misfire light you can’t track down? Ring 456 AutoFix at 616-279-3832 between 8am and 5pm, Monday through Friday, or request an engine check on our contact page.

Need to drop the car outside our weekday hours? Our after-hours drop-off at 456 Carrier St NE in Creston lets you leave it whenever your schedule allows.