As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Pull the intake tube off a high-mileage 3.5L EcoBoost and you often find a film of oil inside it. The best oil catch can for 3.5 EcoBoost trucks is the one built for your engine’s model year, plumbed into the right ventilation lines and easy enough to drain that you actually do it.
Kits here are sorted by engine generation. For other engines, start with our main oil catch can buying guide.
Quick answer
Which catch can fits a 3.5L EcoBoost?
Buy by model year. For a 2017-2020 F-150, Mishimoto’s dual-can kit covers both the PCV and CCV sides, and Ford Performance’s M-6766-35T is the factory-backed single canister. Trucks from mid-2021 on need a 2021.5+ kit, and 2011-2014 trucks have their own Mishimoto kit with a check valve.
Our Quick Picks
Three quick picks: Mishimoto's dual-can kit and Ford Performance's canister for 2017-2020 trucks, plus Mishimoto's mid-2021+ kit. All six are reviewed below; confirm year and engine on Amazon first.

Mishimoto MMBCC-F35T-17SBE
Direct-fit kit that catches blow-by on both ventilation sides.

Ford Performance M-6766-35T
Ford Performance's own separator for the passenger-side line.

Mishimoto 2021.5+ F-150 Kit
Mishimoto's updated kit for the newer F-150 firewall and plumbing.
Why Oil Ends Up in a 3.5 EcoBoost Intake
Every engine pushes some combustion gas past the piston rings. The ventilation system routes that blow-by back into the intake, carrying a fine oil mist that settles in the intercooler piping and on the intake valves.
Direct injection makes the valve side worse. As FuelEconomy.gov explains in its engine technology overview, a direct-injection engine sprays fuel straight into the cylinder instead of into the intake port. No fuel washes over the backs of the intake valves, so oily vapor can bake into carbon there over time.
A catch can gives that mist a place to condense before it reaches the intake. It won’t remove existing carbon; for that, see our guide to the best intake valve cleaner for direct injection engines.
First Gen or Second Gen: Matching a Kit to Your Engine
A kit for one 3.5L generation rarely bolts onto another. Check these points first:
- 2011-2016 (first generation): direct injection only, so these trucks tend to see more valve deposits.
- 2017-2020 (second generation): Ford added port injection alongside direct injection, which helps the valves, but oil mist still reaches the intercooler.
- Mid-2021 on, PowerBoost and newer Expedition: the plumbing changed, so look for a listing that names 2021.5 or later, or the PowerBoost.
- PCV side, CCV side or both: the PCV side carries vapor at idle and light load, while the CCV (fresh-air) side carries it under boost. Dual-can kits cover both.
No single kit fits every 3.5L truck, so confirm the year, model and engine on the Amazon listing before you buy. Our 3.5 EcoBoost spark plug guide covers more of the differences between the two generations.
Best Oil Catch Can for 3.5 EcoBoost Trucks, Sorted by Year
Each pick is listed for a specific 3.5L range; fit details come from the maker or the Amazon listing.
1. Mishimoto MMBCC-F35T-17SBE: Dual Baffled Catch Can Kit for 2017-2020 F-150 3.5L

- Listed for 2017-2020 F-150 and Raptor 3.5L EcoBoost
- Two cans cover the PCV and CCV sides
- Oversized 12 fl oz can plus a 3 fl oz can
- CCV side keeps the stock pressure sensor
Mishimoto’s MMBCC-F35T-17SBE is written for the second-generation engine, and its maker page lists it as a direct fit for the 2017-2020 F-150 3.5L EcoBoost, with the Raptor named on the Amazon listing. It uses two baffled aluminum cans, one on the PCV line and one on the CCV line, so blow-by is caught at idle and under boost rather than on one side only.
The main can holds 12 fluid ounces and the second holds 3, which Mishimoto says allows longer gaps between draining. The kit comes with an application-specific bracket, five direct-fit hoses, quick-disconnect fittings, bronze filters and internal baffle rods, and the cans and filters can be taken apart for cleaning. On the CCV side, the plumbing keeps the factory pressure sensor in place, which Mishimoto says allows running without a check engine light.
Mishimoto advises checking the cans every 1,000 miles until you know how quickly your truck fills them, and keeping the level below the internal baffle. Its page also warns that a 2021 truck may need modification because of firewall changes, so later trucks should look at the 2021.5+ kit instead. The kit is backed by Mishimoto’s lifetime warranty. It suits an owner who wants both sides covered and is comfortable doing a hose-and-bracket install in the driveway.
View Mishimoto MMBCC-F35T-17SBE on Amazon
2. Ford Performance M-6766-35T: Passenger-Side Oil-Air Separator for 2017-2020 F-150 3.5L

- OEM part number M-6766-35T
- Listed for 2017-2020 F-150 3.5L, Raptor included
- Canister mounts on the passenger side
- OEM-quality hoses and fittings
The M-6766-35T is Ford Performance’s oil-air separator for the second-generation 3.5L EcoBoost, sold on Amazon through a Blue Oval Industries listing. It is listed for 2017-2020 F-150 trucks with the 3.5L engine, including the Raptor, and it uses a single canister mounted on the right-hand, or passenger, side of the engine.
Because it carries a Ford Performance part number, it appeals to owners who would rather keep factory-style parts under the hood than add an aftermarket kit. The listing says the hoses and fittings are OEM quality, which helps the install look and seal like the rest of the engine bay. Emptying it means pulling the ventilation lines off the canister, removing it and pouring out the collected oil, so it takes a little longer than a can with a drain valve.
The trade-off is coverage. A single passenger-side canister does not catch the second ventilation path the way a dual-can kit does, so it is a lighter-touch option than the Mishimoto kit above. It is also year-specific: trucks from 2021 on need the later M-6766-35TA set. Check that your truck is a 2017-2020 3.5L before ordering, and keep the removed factory hoses in case you ever return the truck to stock.
View Ford Performance M-6766-35T on Amazon

3. Mishimoto Baffled Oil Catch Can Kit: Dual-Can Setup for 2021.5+ F-150 3.5L EcoBoost

- Direct fit for 2021.5+ F-150 3.5L EcoBoost
- Dual cans catch PCV and CCV blow-by
- Oversized 12 fl oz main can
- CCV side keeps the stock pressure sensor
Ford changed the 3.5L EcoBoost F-150 partway through the 2021 model year, and Mishimoto answered with this separate kit. The Amazon listing calls it a direct fit for the 2021.5+ F-150 3.5L EcoBoost, while Mishimoto’s own page lists 2021.5 through 2023 trucks, so owners of later trucks should check the fit notes on both before ordering.
Like the earlier kit, it uses two baffled cans to catch blow-by from both the PCV and CCV systems. The main can holds 12 fluid ounces, which stretches the time between draining, and the CCV side keeps the factory pressure sensor connected so the truck can run without setting a check engine light. The cans are aluminum and come with the bracket, hoses and fittings needed for the install, and the kit carries Mishimoto’s lifetime warranty.
This is the kit to look at if your 3.5L truck was built after the mid-2021 change, since the 2017-2020 kit may need modification to clear the newer firewall. Plan on checking the cans every 1,000 miles at first, then settle on an interval that suits how you drive. It does not cover the PowerBoost hybrid unless the listing names it, so hybrid owners should look at the J&L pick below.
View Mishimoto 2021.5+ F-150 Kit on Amazon
4. Ford Performance M-6766-35TA: LH and RH Oil-Air Separators for 2021-2024 F-150 3.5L

- OEM part number M-6766-35TA
- Listed for 2021-2024 F-150 3.5L, Raptor included
- Includes driver and passenger side separators
- Molded canisters with filter media
The M-6766-35TA set is Ford Performance’s answer for the newer truck. The Amazon listing, sold by Blue Oval Industries, names 2021-2024 F-150 trucks with the 3.5L EcoBoost, including the Raptor, and unlike the earlier M-6766-35T it includes both a left-hand and a right-hand separator, one for each side of the engine.
Each canister is precision molded and holds filter media that pulls oil vapor out of the air passing through the ventilation system. The listing says the set is engineered specifically for the 2021-2024 3.5L and uses OEM-quality hoses and fittings, so it should follow the factory routing rather than adding long runs of aftermarket line. The canisters are designed to be easy to drain, though you still need to reach them in a crowded engine bay.
With two separators, this set covers more of the ventilation system than the single-canister kit for older trucks, which makes it a closer match to the dual-can Mishimoto kit in coverage. It suits owners who want a Ford part number on a newer truck, perhaps one still under factory warranty. Confirm your model year and engine on the listing, and ask your dealer about warranty questions before fitting any change to the ventilation system.
View Ford Performance M-6766-35TA on Amazon

5. Mishimoto MMBCC-F35T-11SBE: Dual Catch Can Kit with Check Valve for 2011-2014 F-150 3.5L

- Listed for 2011-2014 F-150 3.5L EcoBoost
- Dual cans for the PCV and CCV systems
- Large 7.5 oz and 12 oz cans
- In-line check valve keeps the can unpressurized under boost
First-generation 3.5L EcoBoost engines rely on direct injection alone, which is why owners of early trucks often go looking for a catch can. Mishimoto’s MMBCC-F35T-11SBE is listed for the 2011-2014 F-150 3.5L EcoBoost, with a separate kit sold for 2015-2016 trucks, so check your model year before you order.
Like Mishimoto’s later kits, it uses two cans to catch blow-by from both the PCV and CCV systems. The cans are larger than many single units, at 7.5 ounces and 12 ounces, which helps on an older engine that may send more oil vapor into the lines as the miles pile up. An in-line check valve stops the can from being pressurized when the turbos are making boost, which keeps the system working the way it should.
A can will not clean valves that already have years of carbon on them, so on a high-mileage early truck it works best alongside a valve cleaning or an intake inspection. It suits an owner who plans to keep a 2011-2014 truck for a long time and wants to slow down further buildup. Drain it on a regular schedule, and check the hoses and clamps each time, since older rubber around the engine can be brittle.
View Mishimoto MMBCC-F35T-11SBE on Amazon
6. J&L Oil Separator Co. 3.0: Passenger-Side Separator for 3.5L PowerBoost and 2022+ Expedition

- Listed for 2021-2026 F-Series 3.5L PowerBoost
- Also listed for 2022-2027 Expedition 3.5L EcoBoost
- Knurled base and O-ring for leak-free draining
- Stainless steel mesh filter, 3 oz tank
The J&L Oil Separator 3.0 comes in many versions, and this one is listed for two less common 3.5L applications: the 2021-2026 F-Series with the 3.5L PowerBoost hybrid and the 2022-2027 Expedition with the 3.5L EcoBoost. It mounts on the passenger side, so it covers one ventilation path rather than both.
Inside, a fine stainless steel mesh filter traps oil vapor and lets the droplets fall once they grow heavy enough. The tank holds 3 ounces and has a knurled base that unscrews by hand, with an O-ring to keep it sealed, so draining is quicker than removing a whole canister. J&L suggests checking the separator after the first 1,000 miles and says most applications go 2,500 to 3,500 miles before it needs emptying, though every vehicle is different.
The small tank means more frequent checks than a 12-ounce can, especially in winter. Some retailer listings for J&L separators note that they are not CARB approved, so read the emissions note on the listing if that matters where you live. It suits a PowerBoost or newer Expedition owner who wants a compact unit for an engine that the F-150 kits above don’t cover. Confirm your exact model and year on Amazon before ordering.
View J&L 3.0 Oil Separator (PowerBoost) on Amazon
The Six Kits Side by Side
Use the table to narrow the field by year, then check the listing for your exact truck.
| Kit | Listed for | Sides covered | Draining |
|---|---|---|---|
| Mishimoto MMBCC-F35T-11SBE | 2011-2014 F-150 3.5L | PCV and CCV, with check valve | Two cans, 7.5 oz and 12 oz |
| Mishimoto MMBCC-F35T-17SBE | 2017-2020 F-150 and Raptor 3.5L | PCV and CCV | Two cans, 12 oz and 3 oz |
| Ford Performance M-6766-35T | 2017-2020 F-150 and Raptor 3.5L | Passenger side only | Remove canister to empty |
| Mishimoto 2021.5+ kit | Mid-2021 and later F-150 3.5L | PCV and CCV | Two cans, 12 oz main can |
| Ford Performance M-6766-35TA | 2021-2024 F-150 and Raptor 3.5L | Driver and passenger sides | Two canisters |
| J&L 3.0 Oil Separator | 2021-2026 PowerBoost, 2022-2027 Expedition | Passenger side | 3 oz, twist-off base |
Whichever brand you lean toward, the best oil catch can for 3.5 EcoBoost trucks is one listed for your exact year. Keep the original ventilation hoses in case you ever return the truck to stock.

Draining a Catch Can Through a Michigan Winter
Short trips on freezing mornings never warm the crankcase fully, so water condenses along with the oil, and owners often find a milky mix by midwinter. Left alone, that water can freeze in the can or a low hose.
- Set a baseline: Mishimoto and J&L both suggest checking the can every 1,000 miles until you know how fast your truck fills it.
- Check more often in winter: lots of short trips and idling fill a can faster than highway miles do.
- Drain with the engine off and cool: wear gloves and eye protection, and catch the contents in a pan.
- Dispose of it properly: the mix is used oil, so take it to a used-oil collection point with your next oil change.

Fresh oil on schedule helps too. Our guide to the best motor oil for EcoBoost engines covers the grades to use, and a can only catches what the engine sends it.
When the Problem Isn’t Blow-By
A catch can won’t fix a misfire, boost leak or sensor fault, and a can that suddenly fills fast can point to worn rings or a turbo seal. If your truck stumbles under load, our article on why a car hesitates when accelerating walks through the usual causes.
A check engine light that comes on after you fit a can usually means a disturbed hose, a loose fitting or an unplugged pressure sensor. If the light stays on even though the truck feels normal, read our page on a check engine light on but the car runs fine.

Guessing at twin-turbo codes gets expensive. Our check engine light diagnostics in Grand Rapids read the codes and live data before any parts get replaced.
More Buying Guides
Frequently Asked Questions
Does a 3.5 EcoBoost really need a catch can?
It isn’t required. First-generation 2011-2016 engines use direct injection alone, so they gain the most. Second-generation engines add port injection, but a can still keeps oil out of the intercooler and piping.
Is the best oil catch can for 3.5 EcoBoost trucks a single or dual can?
The PCV side handles vapor at idle and cruise, and the CCV side handles it under boost. A dual-can kit such as Mishimoto’s covers both, while the Ford Performance M-6766-35T covers the passenger side only.
How often should I empty a catch can on a 3.5 EcoBoost?
Check it every 1,000 miles until you know your truck’s fill rate. J&L says most applications reach 2,500 to 3,500 miles, though winter short trips shorten that.
Will a catch can trigger a check engine light?
A well-designed kit shouldn’t. Mishimoto’s 2017-2020 and 2021.5+ kits keep the stock pressure sensor on the CCV side for that reason. A light after installation usually means a hose, fitting or sensor connector needs another look.
Is your EcoBoost throwing codes or running rough? Questions about oil catch can for 3.5 ecoboost parts? Call 616-279-3832 (weekdays, 8am to 5pm) or book through our contact page.
Busy during work hours? Leave the truck with our after-hours drop-off at 456 Carrier St NE, Grand Rapids.
