456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Stock or Lifted Cherokee? Choosing the Best Shocks for XJ Jeeps

best shocks for xj: old SUV hidden in the woods

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Plenty of Cherokee XJs are still on the road decades after the last one was built. The best shocks for XJ owners depend less on brand than on one number: how far the Jeep sits above its factory ride height.

This guide covers the 1984 to 2001 Cherokee XJ, stock or lifted. If you drive something newer or lighter, our roundup of shocks and struts for daily drivers is a better place to start.

Quick answer

What shocks should a 1984-2001 Cherokee XJ get?

Buy for your lift height. A stock XJ suits the Rancho RS5000X set or the Bilstein 4600 rear with Gabriel fronts. A 2 to 3 inch lift needs the Bilstein 5100 set, a 4.5 inch lift fits the Rough Country N3 set, and taller trail builds suit the FOX 2.0 set. Confirm fit on Amazon first.

Our Quick Picks

Three quick picks: a Rancho RS5000X set for a stock-height XJ, a Bilstein 5100 set for a 2 to 3 inch lift and a Rough Country N3 set built for the popular 4.5 inch lift. All six listings are reviewed below.

Rancho RS5000X XJ Set product photo
Stock height

Rancho RS5000X XJ Set

Set of 4 · 1984-2001 Cherokee XJ

Twin-tube gas shocks at factory length.

SuitsUnlifted daily drivers
View on Amazon →
Bilstein 5100 XJ Set product photo
2-3 in lift

Bilstein 5100 XJ Set

Set of 4 · 1984-2001 Cherokee XJ

Monotube shocks lengthened for a small lift.

SuitsXJs with a budget boost or 3 inch kit
View on Amazon →
Rough Country N3 XJ Set product photo
4.5 in lift

Rough Country N3 XJ Set

Set of 4 · 1984-2001 Jeep XJ

Nitrogen shocks sized for a 4.5 inch build.

SuitsLifted XJs that see trails
View on Amazon →

What Sits Under a Cherokee XJ

The XJ was built as a unibody, with the frame rails welded into the body rather than bolted underneath it. Up front, the Jeep Cherokee (XJ) history on Wikipedia describes a coil-spring axle located by four control arms, a layout AMC called Quadra-Link. Out back, leaf springs carry the axle. Both ends use a separate shock absorber, so there are no struts anywhere on the Jeep.

That simple layout has two practical results for shoppers:

  • No spring compressor: the springs stay in place while you unbolt each shock, so this is a basic hand-tool job.
  • Separate front and rear parts: the front and rear shocks have different part numbers, and many listings sell only one position or a single shock.
  • Old aftermarket parts: after more than twenty years, many XJs carry springs or blocks from a previous owner, so the real ride height may not match the paperwork.

Measure the Lift Before You Pick a Shock

Every shock has a fixed collapsed and extended length. On a lifted Cherokee the axles hang farther from the body, so a factory-length shock tops out on rebound and can pull its mounts apart. Fit a long shock to a stock Jeep and the opposite happens: the shock bottoms internally before the bump stop does its work.

To find your real height, park on level ground and measure from the center of each wheel hub to the fender lip, then compare against a stock XJ figure or the lift maker’s numbers. Many lifted XJs sit higher in the rear to counter leaf sag, so check both ends. This is why searches for the best shocks for lifted XJ builds always come back to the same question: how many inches, front and rear?

Best Shocks for XJ Cherokees: Six Listings by Lift Height

These are the best shocks for XJ heights from stock to tall trail lifts, each with the years, position and lift range its listing shows. No single shock fits every Cherokee from 1984 to 2001, so enter your year, drive type and ride height in Amazon’s fit checker and read the notes before you order.

1. Bilstein 5100 24-185622 and 24-185639: Front and Rear Monotube Shock Set for 1984-2001 Cherokee with 2-3 in Lift

Bilstein 5100 XJ Set product photo
Key features
  • Listed for 1984-2001 Cherokee with 2-3 in lift
  • Front 24-185622 and rear 24-185639
  • 46mm monotube body, digressive valving
  • Mounting hardware included

This listing pairs two Bilstein 5100 part numbers, 24-185622 for the front and 24-185639 for the rear, into a set for the 1984 to 2001 Jeep Cherokee with a 2 to 3 inch lift. The same listing also names the 1984 to 1990 Wagoneer at that height. Because the lengths are chosen for a raised XJ, enter your year and lift details in Amazon’s fit checker before you order.

Each shock uses a 46mm monotube body, which keeps the gas charge and the oil in separate chambers so the damping stays consistent as the shock heats up on washboard roads. Bilstein describes the valving as digressive, meaning it reacts quickly to small inputs and then firms up as the hit gets larger. The listing says the shocks are tuned to each application and come with the hardware needed for a direct-fit installation.

This set suits an XJ that runs a spacer lift, add-a-leaf or a mild 3 inch kit and still sees daily commuting. It is the wrong length for a stock Cherokee, where the shock may not compress fully, and it falls short for a 4.5 inch build. Owners with those heights should look at the Rancho set or the Rough Country N3 set below.

View Bilstein 5100 XJ Set on Amazon

2. Rancho RS5000X Gas Shock Set: Twin-Tube Shocks for 1984-2001 Jeep Cherokee XJ at Stock Height

Rancho RS5000X XJ Set product photo
Key features
  • Listed for 1984-2001 Cherokee with 0 in lift
  • Front and rear shocks in one set
  • 16mm nitro-carburized piston rod
  • Protective polyvinyl boot

Rancho sells this RS5000X set for the 1984 to 2001 Jeep Cherokee with no lift, and the listing also covers the 1984 to 1990 Wagoneer at factory height. A set means one order renews the front and rear axles together, which is handy on an XJ where all four original-style shocks tend to wear out at about the same pace. Check the fit checker anyway, since older aftermarket springs can change the numbers.

The RS5000X is a twin-tube design with a large body and all-weather fluid that Rancho rates for internal temperatures from minus 40 to 248 degrees Fahrenheit. The listing describes a 16mm nitro-carburized piston rod to resist scuffs and corrosion, a 35mm sintered iron piston and double-welded loops at the stress points. A polyvinyl boot covers the rod, which helps on a Jeep that spends winter on salted streets.

Rancho calls its valving Progressive Engagement, tuned to soften small impacts at low speed and firm up on bigger ones. This set fits the owner who keeps the Cherokee at stock height for commuting and light trail use. If your XJ sits on lifted springs, the factory-length shock will run short, so match a lift-specific listing instead.

View Rancho RS5000X XJ Set on Amazon

SUV on a curving forest road

3. Rough Country N3 Shock Set: Front and Rear Nitrogen Shocks for 1984-2001 Jeep XJ with 4.5 in Lift

Rough Country N3 XJ Set product photo
Key features
  • Listed for 1984-2001 XJ with 4.5 in lift
  • Set of 4, front and rear
  • 10-stage variable valving
  • 18mm chrome-hardened piston rod

A 4.5 inch lift is one of the most common heights for a Cherokee XJ, and Rough Country sells this N3 set of four specifically for 1984 to 2001 XJs at that height. The extra length lets the front axle droop without topping out the shock, which a factory-length unit cannot do. Lift kits settle at slightly different heights, so measure your Jeep and confirm the set in Amazon’s fit checker.

The listing describes a 54mm shock body to shed heat, a 35mm piston and a chrome-hardened 18mm piston rod. Rough Country says the 10-stage variable valving is meant to improve ride control both on pavement and off road, and the shocks are charged with nitrogen to reduce fade. The company backs the set with a 3-year warranty, as the listing states, which is shorter than some other brands in this guide.

This set is a practical match for a weekend trail XJ on a 4.5 inch kit that still commutes during the week. It is not suited to a stock Cherokee or a mild 2 inch lift, where the extended length can bottom the shock internally. Taller builds above about 5 inches need longer shocks again, such as the FOX set below.

View Rough Country N3 XJ Set on Amazon

4. FOX 2.0 Performance 985-24-042 and 985-24-065: Reservoir Shock Set for 1984-2001 Cherokee 4WD with 4-6 in Lift

FOX 2.0 Performance XJ Set product photo
Key features
  • Listed for 1984-2001 Cherokee 4WD and RWD
  • Sized for 4-6 in front, 5-6.5 in rear lift
  • Part numbers 985-24-042 and 985-24-065
  • Washers, bushings and reservoir clamps included

This FOX listing combines two part numbers, 985-24-042 and 985-24-065, into a set of two front and two rear shocks for the 1984 to 2001 Jeep Cherokee. FOX sizes them for a 4 to 6 inch front lift and a 5 to 6.5 inch rear lift, and the listing names both 4WD and RWD vehicles. Check that your front and rear heights fall inside both ranges.

The 2.0 Performance line uses a 2 inch body, and these come with external reservoirs, which give the oil and gas more volume and help the shocks stay cool on long, rough trails. The box includes washers, bushings, reservoir clamps and nuts, and the factory mounting bolts are reused. Shock boots, roost shields and reservoir mounting plates are sold separately, so budget for the plates if you want the reservoirs secured firmly.

FOX covers these shocks with a one-year warranty, as the listing states. This set suits a dedicated trail Cherokee with long-arm or high-lift suspension where travel and heat control matter more than a soft commute. It does not suit a stock or mildly lifted XJ, and reusing old, rusted factory bolts on a Michigan Jeep is a gamble worth avoiding.

View FOX 2.0 Performance XJ Set on Amazon

path under autumn trees

5. Bilstein 4600 24-010467: Rear Monotube Shock for 1984-2001 Jeep Cherokee at Factory Height

Bilstein 4600 24-010467 Rear product photo
Key features
  • Listed for 1984-2001 Jeep Cherokee
  • Rear position, sold as a single shock
  • Digressive valving, high gas pressure
  • Vulcanized neoprene rubber bushings

The Bilstein 4600 is the brand’s line for vehicles at factory ride height, and part number 24-010467 is listed as a rear shock for the 1984 to 2001 Jeep Cherokee with no spring change required. It is sold as a single shock, so you need two for the rear axle and a separate front pair if those are worn too. Confirm the part in Amazon’s fit checker before ordering.

Bilstein says the 4600 uses high gas pressure and digressive valving to react quickly to changing surfaces, and that it is built for a long service life even when pulling a trailer or driving off road. The listing mentions vulcanized neoprene rubber bushings at the mounts. As a monotube design, it keeps the gas and oil apart, which helps resist fade on long stretches of broken pavement.

This shock suits an unlifted XJ whose rear end wallows or bounces after dips, especially one that carries cargo or tows a small trailer. Because the leaf springs set the ride height, a new shock will not raise a tired rear, so check spring sag first. It is the wrong length for a lifted Cherokee, where the Bilstein 5100 set above makes more sense.

View Bilstein 4600 24-010467 Rear on Amazon

6. Gabriel Ultra Truck G63424: Front Twin-Tube Shock for 1984-2001 Jeep Cherokee

Gabriel Ultra G63424 Front product photo
Key features
  • Listed for 1984-2001 Cherokee front
  • Also listed for 1986-1992 Comanche
  • 7.78 in stroke, 20.45 in extended
  • Sold as a single shock

The Gabriel Ultra Truck G63424 is a front shock listed for the 1984 to 2001 Jeep Cherokee, and the same listing names the 1986 to 1992 Comanche, the 1993 to 1998 Grand Cherokee and the 1984 to 1990 Wagoneer. It comes as one shock per box, so order two for the front axle. Fit can still vary with 2WD or 4WD and older aftermarket coils, so enter your details in Amazon’s fit checker first.

Gabriel publishes the dimensions on the listing: a 7.78 inch stroke, a 20.45 inch extended length and a 12.67 inch collapsed length. Those numbers help you compare it with the shock you are removing. The design is twin-tube, and Gabriel pitches it as a premium OE replacement with simple bolt-on installation.

This shock is a sensible choice for a stock-height Cherokee that needs fresh front dampers without a full set or a lift-oriented part. It is aimed at normal road use rather than hard trail work, and it is too short for a lifted XJ. Pair it with matching rear shocks if those are as old as the fronts, so the Jeep stays balanced end to end.

View Gabriel Ultra G63424 Front on Amazon

Matching a Listing to Your Cherokee

The best shocks for XJ trucks are the ones built for your exact height. Find the row that describes your Jeep, then confirm the part on Amazon.

Your XJListing to checkCoversWatch for
Stock height, all four wornRancho RS5000X setFront and rear0 inch lift only
Stock height, rear onlyBilstein 4600 24-010467One rear shockOrder two
Stock height, front onlyGabriel Ultra G63424One front shockOrder two
2 to 3 inch liftBilstein 5100 setFront and rearMeasure the real lift
4.5 inch liftRough Country N3 setFront and rearToo long for small lifts
4 to 6 inch front, 5 to 6.5 inch rearFOX 2.0 Performance setFront and rearMounting plates extra
Cherokee XJ shock listings compared by ride height, position and what to check before ordering
red-leaf forest path in sunlight

Shocks are not always the source of a noise. A creak over speed bumps on an old XJ often comes from dry control arm bushings, sway bar links or leaf spring shackles, and our guide to why a car squeaks when going over bumps covers how to narrow it down. A shimmy after a pothole points at the track bar, tie rods or worn Jeep ball joints rather than the dampers.

Road Salt, Potholes and an Aging Unibody

West Michigan winters are hard on a Jeep this old. Salt brine gets into the lower shock mounts and rear leaf hardware, so expect seized bolts and studs that snap rather than turn. Soak them in penetrating oil a day ahead and have new hardware ready.

Spring potholes in Grand Rapids are the other test. Worn shocks let the nose keep bouncing after a dip, cup the tires and add body roll on ramps. Our article on how to tell if struts are bad walks through those signs, and they apply to XJ shocks too.

road lined with yellow autumn trees

A little oil on a shock body is not always a failure. The Gabriel shocks and struts FAQ explains that light misting is normal, while oil running down the body points to a shock that needs replacing.

Doing the Job at Home or With Us

Swapping XJ shocks is a fair driveway project with jack stands, wheel chocks and good sockets. Replace shocks in pairs on the same axle and torque the bolts with the Jeep on its wheels. A straight shock swap does not change alignment, but a new lift does, so book one after any height change.

open, work-worn hands

If the bolts fight back or you want the whole front end checked at the same time, our suspension repair service in Grand Rapids handles shocks and the steering parts that wear alongside them. Hendrick Hoffman holds ASE and State of Michigan certification in steering and suspension, and you can read more about his background on our about us page.

Frequently Asked Questions

What are the best shocks for XJ 4.5 lift kits?

Pick a set made for that exact height. The Rough Country N3 set here is listed for 1984 to 2001 XJs with a 4.5 inch lift. If your rear sits higher than the front, the FOX 2.0 set sized for 4 to 6 inches up front and 5 to 6.5 inches in the rear may suit better.

Does a Jeep Cherokee XJ have struts?

No. The XJ uses a coil spring and a separate shock at each front corner and leaf springs with separate shocks at the rear. That means no strut assemblies and no spring compressor for a shock swap.

Can I put stock-length shocks on a lifted XJ?

No. On a lifted Jeep the axle hangs lower, so a factory-length shock can top out on rebound and damage its mounts. Measure the lift and buy a shock listed for that height.

Will new shocks fix a sagging XJ rear end?

No. The leaf springs hold the ride height, and shocks only control how fast the suspension moves. If the rear sits low, worn springs are the likely cause.

Cherokee bouncing down the road or wandering after every pothole? Phone 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a suspension check through our contact page.

Tied up while we are open? Bring the Jeep to 456 Carrier St NE once the day’s work is done and use our after-hours drop-off.