As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Frontier with worn front struts tends to feel loose before it sounds bad. The nose keeps bouncing after a dip, the truck squats and dives with every stop, and the steering wanders on rutted pavement. Picking the best struts for Nissan Frontier pickups starts with your model year and drive type, then with how high you want the front to sit.
This guide covers 2005 and later Frontier front struts. For cars and crossovers, see our roundup of shocks and struts for daily drivers.
Quick answer
Which front struts fit a Nissan Frontier?
For a stock-height bolt-in repair on a 2005 to 2021 truck, start with the loaded Monroe Quick-Strut 371102. Owners who want a little lift and a firmer feel often choose the Bilstein 5100 front pair, and Rough Country’s N3 501098 loaded struts raise the front about 2.5 inches.
Our Quick Picks
Three quick picks for the 2005 and later Frontier: a loaded Monroe for a stock-height repair, a Bilstein pair for a small lift and a 2.5-inch Rough Country set. All six listings are reviewed below.

Monroe Quick-Strut 371102
A complete bolt-in front corner that restores factory ride height.

Bilstein 5100 Front Pair
A gas monotube pair for stock trucks or front lifts up to 2 inches.

Rough Country N3 501098
Pre-loaded N3 struts that raise the front without a separate spacer kit.
Which Frontier Do You Drive?
Only the 2005 and later Frontier uses a coilover strut at each front wheel. The rear rides on leaf springs with ordinary shocks, so a strut order is a front-axle purchase. The spring, damper and top mount work together as one corner, which is why the listing has to match your truck closely.
- 1998 to 2004: torsion bars and front shocks, not struts. See our guide to shocks for the Nissan Hardbody 4×4 instead.
- 2005 to 2021: the long-running second generation, and the years most strut listings target.
- 2022 and later: the redesigned truck. Fewer listings name it, so check the compatibility notes with extra care.
Drive type matters as much as the year. Several listings fit only 2WD (RWD) trucks, while others cover 4WD too. PRO-4X owners should also know what came on the truck: Nissan’s Frontier page lists Bilstein off-road performance shock absorbers on that trim, so a softer OE-style strut will feel different.
Loaded Assembly or Bare Strut for Your Frontier
- Loaded strut: damper, coil spring and upper mount arrive assembled. You remove the old corner and bolt in the new one, and a tired factory spring gets replaced too.
- Bare strut: the damper alone. Your original spring and mount have to be compressed off the old strut and fitted to the new one.
A compressed front spring stores enough energy to cause serious injury if a tool slips. Read our guide to picking a coil spring compressor for strut work before taking a bare-strut job on at home. Whichever type you choose, change both front corners together so the truck sits level and brakes straight.
Best Struts for Nissan Frontier: Six Front Options Compared
Every listing below names the Frontier years it was built for, and some name a drive type as well. None of them fits every cab, engine and trim, so enter your truck in Amazon’s fit checker and read any qualifier notes before you order.
1. Monroe Quick-Strut 371102: Loaded Front Strut and Coil Spring Assembly for 2005-2021 Frontier

- Listed for 2005-2021 Frontier and 2009-2012 Equator
- Strut, spring and upper mount preassembled
- No spring compressor needed
- Protective coating, salt spray tested
The Monroe Quick-Strut 371102 is a complete front corner for the second-generation Frontier. Its listing names the 2005 to 2010, 2011 to 2019 and 2020 to 2021 trucks, plus the 2009 to 2012 Suzuki Equator that shares the platform. It arrives with the strut, coil spring and upper mount already assembled, so the old unit comes out and this one bolts in as a single piece.
Monroe says each spring is calibrated to the original design to bring the truck back to factory ride height. The upper mount is meant to restore steering feel and cut noise, vibration and memory steer, which matters on a truck whose factory mounts have worn. A protective coating guards against rust, and the listing says the unit is salt spray tested and assembled in Paragould, Arkansas.
This is an OE-style replacement, not a lift or a performance upgrade, so it suits owners who want the truck to ride the way it did when new. It is sold one per corner, so order two for the front axle. Monroe sells different Frontier Quick-Strut numbers for different versions, so check your drive type, cab and engine in the fit checker before you buy.
View Monroe Quick-Strut 371102 on Amazon
2. Bilstein 5100 24-187053: Monotube Front Strut Pair for 2005-2017 Frontier, 0-2 Inch Lift

- Listed for 2005-2017 Frontier 4WD and RWD
- Stock height or up to 2 in. of front lift
- Front pair, part number 24-187053
- Mounting washers, bushings and nuts included
This listing is a front pair of Bilstein 5100 struts, part number 24-187053, for the 2005 to 2017 Frontier in both 4WD and RWD form. Bilstein rates them for trucks with no suspension changes or with front lift systems of up to 2 inches. The 5100 is a common choice for second-generation Frontier owners who drive gravel and dirt roads as well as pavement.
Both struts are gas-charged monotube dampers, a design Bilstein uses across its truck line for steady control as the oil heats up. The box includes the washers, bushings and nuts needed for the job, while the factory mounting bolts are reused. Bilstein backs the pair with its limited lifetime warranty, which the listing confirms.
These are bare struts, so your factory coil springs and top mounts have to be moved over with a proper compressor, or by a shop. Expect a firmer, more controlled feel than the original parts rather than a softer ride. If your springs have sagged or you want a plain stock-height swap, a loaded assembly is the simpler route, and an alignment is needed either way.
View Bilstein 5100 Front Pair on Amazon

3. Rough Country N3 501098: 2.5-Inch Lifted Loaded Struts for 2005-2024 Frontier

- Listed for 2005-2024 Frontier
- 2.5 in. of front lift
- Pre-loaded coil springs, bolt-on install
- Limited lifetime replacement warranty
Rough Country’s N3 501098 is a pair of loaded front struts that lift the Frontier about 2.5 inches. The listing names the 2005 to 2024 model years, which covers the long second generation and the first years of the redesigned truck. Each strut comes with its coil spring already installed, so there is no spring compressor involved and the units bolt into the factory mounting points.
Rough Country describes the ride as smooth and close to factory, and it offers at-home installation support for owners doing the work themselves. The struts carry the brand’s limited lifetime replacement warranty, according to the listing. For many owners the appeal is getting height and fresh dampers in one purchase rather than stacking spacers on worn struts.
Lifting only the front changes how the truck sits, so think about whether you want a level stance or still need some rake for towing and hauling. Rough Country also sells complete kits that include rear parts if you prefer matching heights front and back. Raising the front changes suspension angles, so book an alignment right after, and confirm your exact year and drive type in the fit checker.
View Rough Country N3 501098 on Amazon
4. Gabriel Ultra ReadyMount G57646: Loaded Front Strut Assembly for 2005-2021 Frontier RWD

- Listed for 2005-2021 Frontier RWD
- Pre-assembled strut, spring and mount
- 4.33 in. stroke, 15.04 in. extended
- Sold as a single corner
The Gabriel Ultra ReadyMount G57646 is a loaded front strut assembly, and its listing limits fit to the 2005 to 2021 Frontier with rear-wheel drive. That narrower fit is useful information, since many 2WD work trucks and King Cab commuters in this generation never had four-wheel drive. The strut, coil spring and upper mount come assembled, so the job needs no spring compression.
Gabriel lists the specifications clearly: a 4.33-inch stroke, a 15.04-inch extended length and a 10.71-inch collapsed length. The title highlights G-Force ride control and says each unit is fit and ride tested. The listing also gives a long interchange list of other brand numbers for the same RWD application, which makes cross-checking against your old part easier.
This is a stock-height replacement meant to bring back the original ride rather than lift the truck or firm it up. It ships as a single corner, so plan on two for the front axle. Owners of 4WD Frontiers should skip it and look at a listing that names their drive type, and every owner should confirm the exact truck in the fit checker before buying.
View Gabriel ReadyMount G57646 on Amazon

5. Monroe OESpectrum 71102: Bare Front Strut for 2005 and Later Frontier

- Compatibility list covers 2005-2023 Frontier
- Acceleration Sensitive Damping valving
- Nitrogen gas charge, all-weather fluid
- Limited lifetime warranty
The Monroe OESpectrum 71102 is a bare front strut, meaning the damper only, for owners whose factory springs and mounts are still in good shape. Its title names the 2005 to 2026 Frontier, while the compatibility bullets list the 2005 to 2010, 2011 to 2021 and 2022 to 2023 trucks along with the Suzuki Equator. That makes it one of the few listings here that reaches into the redesigned generation.
Monroe builds it with Acceleration Sensitive Damping valving and a PTFE-banded piston, which the company says improves control without giving up ride comfort. An all-weather fluid is meant to handle temperature swings, and a nitrogen gas charge reduces aeration on most applications. The listing notes a chrome-plated piston, a bronze-reinforced rod guide and Monroe’s limited lifetime warranty.
Because it is a bare strut, the spring has to be transferred with a compressor, which is a careful job on a truck. The protective boot and jounce bumper are sold separately, so buy those too if the originals are torn or crumbling. It suits owners who want an OE-style ride, already have the tools and prefer to keep their springs, and it should be bought in pairs.
View Monroe OESpectrum 71102 on Amazon
6. FOX 2.0 Performance 983-02-054: Front Coilover Pair for 2005-2016 Frontier, 0-2 Inch Lift

- Listed for 2005-2016 Frontier 2WD and 4WD
- Front pair of struts with springs
- Preload ring sets 0-2 in. of lift
- Ships preset at 2 in. of lift
The FOX 2.0 Performance 983-02-054 is a front pair of coilovers, each with its own spring, for the 2005 to 2016 Frontier in 2WD and 4WD form. The listing rates it for trucks at factory height or with up to 2 inches of front lift. It is aimed at owners who spend real time on two-tracks, seasonal roads and trails, rather than those who only want to replace a worn stock strut.
Ride height is set with an adjustable preload ring that moves the spring seat, and FOX ships the coilovers preset at 2 inches of lift. That means you should decide on your target height before installing, since leaving the preset in place raises the front. FOX covers the pair with a limited one-year warranty against defects and early failure, which is shorter than some other options here.
Since each unit arrives with its spring, there is no spring transfer from the old strut, but adjusting preload takes the right spanner and some care. Plan on an alignment after any height change, and recheck it if you adjust the preload later. Owners of 2017 and newer trucks should look for a FOX listing that names their year, and every buyer should confirm fit in Amazon’s checker.
View FOX 2.0 Performance 983-02-054 on Amazon
Matching a Strut to Your Truck and Goal
Use this table to shortlist the best struts for Nissan Frontier trucks, then confirm the part number against your VIN and drive type.
| Your Frontier and goal | Listing to check | Type | Watch for |
|---|---|---|---|
| 2005 to 2021, stock height, quick swap | Monroe Quick-Strut 371102 | Loaded | Sold per corner; confirm drive type |
| 2005 to 2017, up to 2 inches of lift | Bilstein 5100 front pair | Bare monotube | Spring transfer; firmer ride |
| 2005 to 2024, 2.5-inch front lift | Rough Country N3 501098 | Loaded, lifted | Alignment and rear height |
| 2005 to 2021 RWD, stock repair | Gabriel ReadyMount G57646 | Loaded | Not listed for 4WD |
| 2005 and later, keep your springs | Monroe OESpectrum 71102 | Bare strut | Boot and bumper sold separately |
| 2005 to 2016, trail use | FOX 2.0 983-02-054 | Coilover pair | Ships set at 2 inches of lift |

Be sure the struts are the actual problem before you spend money. A creak over speed bumps is often a dry sway bar bushing, a worn end link or a control arm bushing, and our article on why a car squeaks when going over bumps walks through those first.
West Michigan Roads and a Tired Frontier Front End
Spring thaw in Grand Rapids opens potholes faster than crews can patch them, and a midsize pickup feels every one. Each sharp hit drives the strut toward the end of its stroke, and a Frontier hauling a bed full of gear or a small trailer adds load to every impact. Over time the seals weep and damping fades, even on the best struts for Nissan Frontier owners can buy.
Watch for an oily film down the strut body, front tires cupping on the edges, a nose that keeps bobbing after a dip or a clunk over broken pavement. Our checklist for how to tell if struts are bad covers each sign in detail, and the pothole damage signs article helps after a hard winter strike.

Road salt makes the job slower, too. Lower strut bolts can corrode into their bushings and the top mount nuts rust onto the studs, so soak the hardware with penetrating oil a day ahead and have new nuts ready. Even the best struts for Nissan Frontier trucks rely on sound hardware to hold them in place.
Swapping Frontier Struts and Getting It Aligned
A loaded strut swap on a Frontier is a fair weekend project with a solid floor jack, jack stands and patience. A bare strut adds the spring transfer, and that step belongs with someone who owns a compressor rated for truck springs.
Book an alignment afterward in every case. New struts can shift camber and toe, and a lifted strut shifts them more, so skipping it invites a pull and early tire wear.

Would you rather not fight seized bolts in the driveway? Our suspension repair service in Grand Rapids covers struts, shocks, mounts and the steering parts around them. Steering and suspension is one of the areas where Hendrick Hoffman holds ASE and State of Michigan certification, and you can read about his background on our about us page.
More Buying Guides
Frequently Asked Questions
Does the Nissan Frontier have struts or shocks in front?
It depends on the year. Trucks from 2005 on use a coilover strut at each front wheel, while 1998 to 2004 models use torsion bars with conventional front shocks. All years use shocks at the rear.
Do 2WD and 4WD Frontiers take the same front strut?
Not always. Some listings, such as the Gabriel G57646, name only RWD trucks, and others cover both. Enter your exact drive type, cab and engine in the fit checker before ordering.
Will lifted struts change how my Frontier drives?
Expect some change. Raising the front alters the suspension angles, the steering can feel different and the truck may sit nose-high unless the rear is raised too. Plan on an alignment once it settles at the new height.
Do the Frontier’s rear shocks need replacing along with the struts?
If they have covered the same miles, it usually makes sense. Fresh fronts with worn rears can leave the back of the truck bouncing after bumps. The rear shocks are separate parts, so order them by year and drive type as well.
Does your Frontier bounce, clunk or wander on Grand Rapids streets? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a front suspension check through our contact page.
Working the same hours we do? Bring the truck to 456 Carrier St NE after we close and leave it with the after-hours drop-off.
