As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
The 5.7 HEMI uses an electronic throttle body: a motor opens the throttle plate when the computer reads your pedal position, and a built-in sensor reports back how far it opened. When that sensor or motor starts to drift, the truck or car can idle rough, flash the electronic throttle control light or drop into limp mode. Choosing the best throttle body for 5.7 HEMI engines starts with one question: are you replacing a failed part, or chasing sharper response?
This guide covers both. It explains how the two HEMI generations differ, then reviews six throttle bodies, each matched to the years its listing names.
Quick answer
What is the best throttle body for a 5.7 HEMI?
For a failed unit on a 2013 or later HEMI, the Mopar 53034251AB is the factory match. For a 2005-2012 Ram, the 80 mm A-Premium is a direct-style replacement. If you want quicker pedal response on a 2013 or newer engine, the BBK 1843 90 mm bolts to the stock flange. Confirm fit by VIN first.
Our Quick Picks
Three quick picks: BBK's 90 mm unit for 2013 and later engines, the factory Mopar part, and A-Premium's 80 mm replacement for 2005-2012 Ram trucks. All six are reviewed below.

BBK 1843 90mm
A larger-bore unit built around factory electronics.

Mopar 53034251AB
The original-equipment part for owners who want an exact match.

A-Premium 80mm
A stock-size replacement for first-generation HEMI trucks.
Which HEMI Throttle Body Does Your Engine Use?
The 5.7 HEMI throttle body changed over the years, and replacement listings split into two groups. The earlier group covers 2005-2012 vehicles and cross-references factory numbers such as 4591847AC for cars and SUVs and 53032801AC for Ram trucks. The later group covers 2013 and newer engines and cross-references 53034251AB and its successors.
Those groups do not swap freely, because the flange, connector and electronics can differ. To avoid a return, read the part number on your current throttle body and match it to the listing’s reference numbers.
- Ram 1500 owners: 2005-2012 trucks and 2013-and-later trucks use different parts, so check your model year before you look at the best throttle body for 5.7 HEMI Ram 1500 options.
- Challenger and Charger owners: the 2009-2012 cars share numbers with the 300 and Grand Cherokee of the same years, while 2013 and later cars move to the newer unit.
- Everyone: confirm year, model and engine in Amazon’s fit tool. No single listing fits every HEMI.
Stock 80 mm vs a Bigger Bore: What Size Makes Sense
The replacement listings for both generations give the stock bore as 80 mm. Performance units step up to 85 or 90 mm. A bigger opening cuts restriction near full throttle, while the computer still meters fuel from its sensor readings.
On a stock 5.7, owners mostly notice sharper pedal feel rather than raw power, because the intake, cam and exhaust still set the limit. A 90 mm unit makes more sense as part of a wider build. If your goal is simply to fix a failure, an 80 mm OE-style unit is the sensible size.
Best Throttle Body for 5.7 HEMI: Six Units by Generation
The first two picks are 90 mm upgrades for 2013 and later engines, then a 90 mm unit for the 2005-2012 cars, followed by three 80 mm replacements. Each listing names its own years and models, so check yours against it.
1. BBK Performance 1843: 90 mm Power Plus Throttle Body for Gen III HEMI

- 90 mm single blade bore
- CNC machined 356 aluminum housing
- New factory OEM electronic throttle controls
- Bolts to the stock flange with no modifications
BBK’s Power Plus 1843 is a performance throttle body for the Mopar Gen III HEMI, and the listing names 2013-24 applications. It replaces the stock 80 mm unit with a 90 mm single blade bore, housed in a brand new CNC machined 356 aluminum body. BBK fits it with new factory OEM electronic throttle controls, so the motor and position sensor are the same type the engine computer already expects.
The listing describes the install as a true bolt-on that uses the stock flange with no modifications. That matters on a drive-by-wire engine, where a mismatched sensor can set codes or upset idle. The larger opening reduces restriction at wide throttle, and most owners on a stock 5.7 notice the change as quicker pedal response rather than a big jump in power.
This is an upgrade part, not the cheapest way to fix a failed throttle body. It does not suit 2005-2012 engines, which use a different unit. Clean the intake tube and fit a fresh gasket during the swap, then let the engine complete its idle relearn. Before checkout, run your exact year, model and engine through the throttle body for 5.7 hemi listing’s fit tool.
2. BLOX Racing XTREME: 90 mm Drive By Wire Throttle Body with Calibrated Electronics

- 90 mm bore with 95 mm outer diameter
- CNC machined cast aluminum, natural finish
- Pre-installed calibrated electronics
- Plug and play, works with the factory tune
BLOX Racing’s XTREME throttle body is a 90 mm drive by wire unit aimed at 2013-2021 HEMI vehicles. The listing names the Chrysler 300C, Dodge Charger, Dodge Challenger and Ram with the 5.7 or 6.4 HEMI. The bore is 90 mm with a 95 mm outer diameter, machined from heavy-duty cast aluminum and left in a natural finish.
The electronics come pre-installed and calibrated, and BLOX states that the unit works with the factory tune and needs no computer re-tune. It is described as a plug and play replacement for the stock part, with an install the maker puts at under an hour. For a 2013 or newer Challenger or Charger with intake and exhaust upgrades, it is a straightforward way to remove the stock 80 mm restriction.
Like any larger throttle body, it changes pedal feel more than peak power on an otherwise stock engine. It is not meant for 2005-2012 vehicles, and BLOX lists several engines, so read the fitment notes closely. Check the gasket condition, keep the connector clean, and expect a short idle relearn after installation. Check the throttle body for 5.7 hemi fitment chart on the listing against your year, model and engine first.
View BLOX Racing XTREME 90mm on Amazon

3. EVIL ENERGY 90 mm Electronic Throttle Body: Replaces 4591847AC on 2005-2012 HEMI

- 90 mm throttle bore
- Replaces OE part number 4591847AC
- Cast aluminum housing
- Pin-type connector with gaskets included
EVIL ENERGY’s 90 mm electronic throttle body is one of the few larger-bore options listed for the earlier 5.7 HEMI. It is sold as a direct replacement for OE part number 4591847AC. The listing names the 2005-2012 Chrysler 300, 2009-2012 Challenger R/T, 2006-2012 Charger, Magnum R/T, Grand Cherokee, Commander and Aspen, plus Ram 1500 5.7 trucks from 2005 to 2012.
The housing is cast aluminum, the throttle plate is precision machined, and the unit uses a pin-type connector. Gaskets come in the box, which saves a separate trip for parts. EVIL ENERGY says it works with factory auto start-stop and cruise control. For an older Charger or Challenger owner who wants a bigger bore without moving to a newer engine, this is a practical bolt-on choice that uses the original mounting points.
Fit is the main thing to check. The 2005-2012 years used more than one factory number, and Ram trucks from those years often carry a different part, so compare the number on your old unit with the listing. A 90 mm bore is mostly about response; it will not fix a vacuum leak or a failing pedal sensor. Confirm your year, model and engine on Amazon first.
View EVIL ENERGY 90mm on Amazon
4. Mopar 53034251AB: Genuine OE Fuel Injection Throttle Body

- Genuine Mopar part
- Factory part number 53034251AB
- Electronic throttle body assembly
- Cross-referenced to later 5.7 HEMI applications
Mopar 53034251AB is the genuine factory throttle body sold under Chrysler’s parts brand. Aftermarket replacement listings cross-reference this number, along with its AC and AD successors, to 2013 and later applications, including the Ram 1500, Challenger, Charger, 300 and Durango with the 5.7 HEMI. Buying the Mopar part means the housing, motor and position sensor match what the factory installed.
The appeal is simple: no guessing about calibration or connector style. The engine computer already expects this unit, so a stock HEMI should return to normal idle and pedal feel after the swap and any idle relearn the vehicle needs. For owners who plan to keep the engine stock, or who want the repair to match factory parts, the OE throttle body is the predictable choice.
The Amazon listing gives little detail beyond the part number, so the burden of confirming fit is on you. Check the number on your current throttle body, enter your vehicle in the fit tool, and ask the seller if anything looks unclear. This unit keeps the stock bore, so it will not change performance. It does not suit 2005-2012 engines, which use different factory parts.
View Mopar 53034251AB on Amazon

5. A-Premium Electronic Throttle Body: 80 mm OE-Style Unit for 2005-2012 Ram 5.7L

- 80 mm bore diameter
- Throttle position sensor included
- Aluminum housing, 6-terminal blade connector
- Replaces 53032801AC, 68060353AA and others
A-Premium’s electronic throttle body is a stock-size replacement for the earlier HEMI trucks and SUVs. The listing names the Dodge Ram 1500, 2500 and 3500 from 2005 to 2010, the Ram 1500, 2500 and 3500 from 2011 to 2012, the 2005-2009 Durango and the 2007-2009 Chrysler Aspen, all with the 5.7L V8. It lists factory numbers 53032801AC and 68060353AA among its references.
The unit has an 80 mm bore, an aluminum housing and a 6-terminal blade connector, and the throttle position sensor comes installed. That keeps the stock airflow and pedal feel, which is what most owners want when the old unit has started setting codes or dropping the truck into limp mode. A-Premium notes that a relearn procedure may be required after installation, so plan for a key cycle routine or a scan tool.
No gasket is included, so order one with it or reuse the old one only if it is in good shape. This is a repair part, not an upgrade, and it does not suit 2013 and later engines. Check the part number on your old throttle body against the listing’s references. Before checkout, run your exact year, model and engine through the throttle body for 5.7 hemi listing’s fit tool.
6. INGKAN 53034251AC: 80 mm Replacement Throttle Body for 2013-2021 HEMI

- 80 mm bore
- Replaces 53034251AB, 53034251AC and 53034251AD
- Cross-referenced to S20414 and TB1181
- Listed for 5.7L, 6.2L and 6.4L applications
INGKAN’s 53034251AC throttle body is an aftermarket replacement for the later HEMI unit. The listing names the 2013-2021 Chrysler 300, Dodge Challenger and Charger, the 2014-2021 Durango, the 2021 Grand Cherokee and the 2013-2021 Ram 1500, 2500 and 3500. It cross-references factory numbers 53034251AB, 53034251AC and 53034251AD, along with aftermarket numbers S20414 and TB1181.
The bore is 80 mm, matching the stock size, so the engine keeps its original airflow and pedal feel. That makes it a fit for owners who simply need a working throttle body again after a sensor fault, a rough idle or a lit throttle control light. INGKAN’s listing also covers 6.2L and 6.4L engines, but this guide only looks at the 5.7 HEMI, and you should check that your engine is listed. Keeping the stock size also means no change to how the throttle responds day to day.
This is a repair part rather than an upgrade, and the listing gives fewer construction details than the OE or BBK pages. Inspect the connector, fit a fresh gasket, and clean carbon from the intake tube while it is apart. It does not suit 2005-2012 engines. Confirm your year, model and engine on Amazon before you order.
View INGKAN 53034251AC on Amazon
5.7 HEMI Throttle Body Comparison by Year
Narrow the list by generation and bore size, then check fit for your vehicle.
| Throttle body | Bore (per listing) | Years named in listing | Suits |
|---|---|---|---|
| BBK 1843 | 90 mm | Gen III HEMI, 2013-24 | Upgrade on newer Ram, Challenger, Charger |
| BLOX Racing XTREME | 90 mm | 2013-2021 | Upgrade with factory tune |
| EVIL ENERGY 90 mm | 90 mm | 2005-2012 | Older cars, SUVs and Ram trucks |
| Mopar 53034251AB | Factory | Confirm by VIN (2013 and later number) | Owners who want the OE part |
| A-Premium | 80 mm | Ram 2005-2012, Durango, Aspen | Stock replacement on older trucks |
| INGKAN 53034251AC | 80 mm | 2013-2021 | Stock replacement on newer engines |
For a 2009-2012 Challenger or Charger, the EVIL ENERGY unit is the only upgrade here listed for your years. For 2013 and newer cars, the best throttle body for 5.7 HEMI Challenger builds is the BBK or BLOX unit, both sold as bolt-on parts.

Installing a HEMI Throttle Body and Cold-Weather Care
Swapping a throttle body on a 5.7 is a reasonable driveway job for most owners. Work on a cold engine, disconnect the battery, remove the intake tube, unplug the connector and take out the bolts. Fit a new gasket, torque the bolts evenly and reconnect everything.
- Wear safety glasses and keep fingers out of the bore, since the plate can snap shut with the key on.
- Expect an idle relearn. Some vehicles learn on their own after a few key cycles and a short idle, others need a scan tool.

West Michigan winters are hard on electrical connections under the hood. Salt spray and freeze-thaw moisture reach old connectors, and a corroded pin can set the same codes as a failed sensor. Clean and seal the connector with dielectric grease when you install the new unit.
Short winter trips also coat the throttle plate in oily carbon, which can cause a rough cold idle before the part itself fails. Our guide to the best throttle body cleaner covers safe sprays for electronic units, and a catch can for the 5.7 HEMI can slow the deposits down.
Symptoms Worth a Diagnosis Before You Buy
A vacuum leak, a failing mass air flow sensor or a worn pedal sensor can all set codes that look like a throttle body fault. If the MAF reading is the issue, our roundup of the best mass air flow sensor brand options explains what to replace it with.

A stumble when you press the pedal is covered in our article on why a car hesitates when accelerating. If the warning light is on but the HEMI still drives normally, read what a check engine light means when the car runs fine. The fueleconomy.gov maintenance guidance from the Department of Energy and EPA also advises having the vehicle inspected when that light comes on.
A check engine light diagnostic in Grand Rapids lets us read live throttle and pedal sensor data and test the wiring before you buy a part.
More Buying Guides
Frequently Asked Questions
What size throttle body is best for a 5.7 HEMI?
For a stock engine, the factory 80 mm size is the sensible choice and keeps the original pedal feel. A 90 mm unit suits engines with intake and exhaust upgrades, where the extra airflow has somewhere to go.
Does a 90 mm throttle body need a tune on a 5.7 HEMI?
The BBK and BLOX listings describe their units as bolt-on parts that work with the factory electronics and tune. An idle relearn may still be needed after any throttle body swap, and a custom tune is a separate choice.
Is a throttle body spacer worth it on a 5.7 HEMI?
Spacers do not enlarge the bore, and on a fuel-injected engine their effect on power is small. If you want a change you can feel, a larger throttle body or a full intake upgrade does more.
How do I know my HEMI throttle body is failing?
Common signs are a lit electronic throttle control light, limp mode, a rough or surging idle and throttle position codes. Clean the plate and check the connector first, because carbon and corrosion cause many of the same symptoms.
Got a HEMI that idles rough or keeps flashing the throttle light? Ring Hendrick and the team at 616-279-3832, Monday to Friday from 8am to 5pm, or send us a note through the contact page.
If your workday overlaps our hours, bring the truck to 456 Carrier St NE after we close and use the after-hours drop-off.
