456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Towing a Camper Behind a JT? Best Trailer Brake Controller for Jeep Gladiator

best trailer brake controller for jeep gladiator: scenic mountain valleys and winding paths

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A Gladiator pulls a pop-up camper, a pontoon or a trailer of firewood without much fuss, but once the trailer has electric brakes, the truck needs a controller to run them. Picking the best trailer brake controller for Jeep Gladiator owners starts under the dash, because the plug you have decides how easy the install will be.

Below we explain how the JT’s factory wiring works with aftermarket controllers, when proportional braking is worth it, and then review six units and one harness listed for the truck. For long or wide loads, pair the controller with a set from our guide to clip-on and extended tow mirrors.

Quick answer

Which brake controller suits a Jeep Gladiator?

For a plug-in kit with the Gladiator harness in the box, the REDARC Tow-Pro Trail Kit is the simplest route, and its off-road mode suits trail towing. The CURT Spectrum with the CURT 51527 harness gives a tidy factory look, and the Tekonsha Prodigy iD adds phone setup.

Our Quick Picks

Three quick picks: a plug-in kit with the Gladiator harness, a hidden-module controller with a factory look and a phone-configured unit. All six products are reviewed below.

REDARC Tow-Pro Trail Kit product photo
Gladiator kit

REDARC Tow-Pro Trail Kit

Dual mode · 1-3 axles · harness included

A complete plug-in kit with the Gladiator lead and a compact dash dial.

SuitsCampers, boats and trail towing
View on Amazon →
CURT Spectrum product photo
Factory look

CURT Spectrum

Proportional · 1-4 axles · hidden module

A rotary dash knob with the module tucked away behind the trim.

SuitsOwners who want a clean dash
View on Amazon →
Tekonsha Prodigy iD product photo
Phone setup

Tekonsha Prodigy iD

Proportional · Bluetooth · 1-4 axles

An in-dash controller you configure from a smartphone app.

SuitsOwners with more than one trailer
View on Amazon →

Check the Plug Before You Pick a Controller

Gladiators built with the factory trailer tow package usually come with a 7-way socket at the hitch and a brake controller connector tucked under the dash. That connector is what makes a plug-and-play install possible. CURT describes its 51527 Gladiator harness as letting a CURT controller plug into that original equipment socket, with no cutting or splicing.

The catch is that each brand uses its own plug on the controller side. A CURT controller needs a CURT quick plug harness, a Tekonsha controller needs a Tekonsha harness, and the REDARC Trail Kit ships with its own Gladiator lead. Buy the controller and harness as a matched pair.

  • No tow package: without the factory socket, a plug-in harness has nothing to plug into. You are looking at a wiring job, or an in-line unit that lives behind a working 7-way.
  • Year and trim: listings name Gladiator years, and fit can change with the model year. Confirm year, trim and engine on Amazon before you order.
  • Knee room: the JT footwell is tight. A slim dash knob with a hidden module keeps your shins clear.

Proportional, Time-Delay or Wireless on a JT

A proportional controller reads how hard the truck is slowing and matches trailer braking to it. A time-delay unit ramps up to a set output over a short delay, which works but can feel abrupt or late. On a Gladiator pulling anything heavier than a small utility trailer, proportional braking is the better fit, and our explainer on proportional vs time-delay brake controllers covers the details.

Wireless units move the settings to a phone app and keep the cab clear. They suit owners who swap between a camper and an off-road trailer and want stored profiles. None of these devices change what the truck may tow: check the owner’s manual and the placard on the driver’s door jamb for your Gladiator’s trailer and tongue weight limits.

Best Trailer Brake Controller for Jeep Gladiator: Six Products Reviewed

Picks one to five are controllers, and pick six is the harness that connects a CURT controller to the Gladiator’s factory socket. No single listing fits every Gladiator, so confirm year, trim and engine on Amazon before you buy.

1. REDARC Tow-Pro Trail Kit: Dual-Mode Controller with Gladiator Harness

REDARC Tow-Pro Trail Kit product photo
Key features
  • Listed for 2019-2024 Gladiator and 2018-2024 Wrangler
  • Manual off-road mode and everyday mode
  • Gladiator harness and mounting bracket included
  • Controls trailers with 1 to 3 axles

The REDARC Tow-Pro Trail Kit is an electric trailer brake controller sold as a complete package for the Jeep Wrangler and Gladiator. The listing names the 2019 to 2024 Gladiator and the 2018 to 2024 Wrangler, and the box includes the controller, a Gladiator and Wrangler wiring harness, a universal pigtail harness, switch inserts and a mounting bracket.

Its main feature is the choice of two modes. Everyday mode is meant for normal road towing, while the manual off-road mode is aimed at steep descents, mud and sand, where you want direct control over how hard the trailer brakes. The listing also describes active calibration and sway control, and the compact dash dial avoids the knee-knocking box that some controllers put in the footwell. It handles trailers with one to three axles, and REDARC lists a two-year limited warranty.

This kit suits Gladiator owners who tow a camper or a gear trailer down forest roads as well as on the highway, and who want the harness and controller from one maker. It is not the choice for a four-axle trailer. Check that your truck has the factory brake controller connector, and confirm year, trim and engine on the listing before you order.

View REDARC Tow-Pro Trail Kit on Amazon

2. CURT 51170 Spectrum: Proportional Controller with Dash-Mount Knob

CURT Spectrum product photo
Key features
  • Controls 2 to 8 brakes on 1 to 4 axles
  • Push-button rotary knob with 10 tri-color LEDs
  • Main module mounts out of sight
  • Triple-axis accelerometer, auto leveling

The CURT 51170 Spectrum is a proportional trailer brake controller split into two parts: a small rotary knob that mounts in the dash and a main module that hides behind the trim. The knob carries ten tri-color LEDs and a push-button interface that handles the settings, and a press of the knob gives you manual override when you need trailer brakes on their own.

Inside, a triple-axis accelerometer senses how quickly the truck is slowing and applies the trailer brakes in proportion, which gives smoother stops than a time-delay unit. The listing describes auto leveling, so mounting angle is less fussy, and it controls two to eight brakes on one to four axles. That covers a small single-axle utility trailer up to a tandem camper. The quick plug harness is sold separately, and on a Gladiator that is the CURT 51527.

This suits owners who want the dash to look as close to factory as possible and the JT footwell kept clear. It is a little more involved to fit than a one-piece box, because you have to find a spot for both the knob and the module. Pair it with the matching harness and confirm fit for your Gladiator year on the listing.

View CURT Spectrum on Amazon

picturesque road flanked by vibrant yellow-leaved trees in autumn

3. Tekonsha 90920 Prodigy iD: Bluetooth-Configured Controller for 1-4 Axles

Tekonsha Prodigy iD product photo
Key features
  • Set up and adjust through the EDGE phone app
  • Front-facing color LED display
  • In-dash knob with power module behind the dash
  • Controls 2 to 8 brakes on 1 to 4 axles

The Tekonsha 90920 Prodigy iD is an electric brake controller with an in-dash rotary knob and a power module that sits out of sight behind the dash. It is configured through Tekonsha’s EDGE app on an Apple or Android phone or tablet, where you program and adjust power output, boost and braking type rather than pressing buttons on a box.

A front-facing color LED display shows the current settings, real-time diagnostics and alerts, so you can see at a glance whether the trailer is connected. The listing also mentions a log of alerts and notifications that you can share with Tekonsha’s technical support team if something goes wrong. It works with two to eight brakes on one to four axles, which covers most campers and car haulers a Gladiator would pull.

This suits owners who tow more than one trailer and like adjusting settings on a phone. It is less suited to someone who wants a kit in one box, because Tekonsha’s vehicle-specific plug-and-play harness is sold separately and the Gladiator needs its own version. Confirm the harness part number and your Gladiator year and trim on Amazon before buying both.

View Tekonsha Prodigy iD on Amazon

4. CURT 51200 Echo In-Line: Bluetooth Controller That Mounts Behind the 7-Way

CURT Echo In-Line product photo
Key features
  • Smartphone app controls all brake settings
  • Installs behind a 7-way socket with USCAR connectors
  • Waterproof enclosure for the circuits
  • Triple-axis accelerometer, 1 to 4 axles

The CURT 51200 Echo In-Line is a proportional trailer brake controller that leaves nothing in the cab at all. Instead of mounting under the dash, it plugs in behind an existing 7-way socket that uses USCAR connectors, and you control it over Bluetooth from a smartphone app that monitors brake activity and sends status updates.

Because it sits at the back of the truck, the circuits live in a waterproof enclosure meant to stand up to spray and weather. A triple-axis accelerometer reads how the truck is slowing and applies the trailer brakes to match, and the listing rates it for one to four axles. With the settings on your phone, there is no knob to bump with a knee on a rough trail, and the interior keeps its stock look.

This suits Gladiator owners who want a clean dash or who already use the factory controller socket for something else. Before you buy, check that your truck’s 7-way socket has the USCAR-style connectors behind it, since the listing depends on them. Owners who want a physical manual lever within reach should look at an in-dash unit instead.

View CURT Echo In-Line on Amazon

empty road stretches through barren hills with clear blue sky

5. Hopkins 47297 Insight: Plug-in Proportional Control for Electric or Hydraulic

Hopkins Insight product photo
Key features
  • Proportional braking that mirrors the tow vehicle
  • Works with electric or electric-over-hydraulic brakes
  • 7 sensitivity settings and a vertical manual slide
  • Short protection for up to 8 trailer brakes

The Hopkins 47297 Insight Plug-in Simple is a proportional brake control that mirrors the braking of the tow vehicle for smooth stops. Its main draw is flexibility: the listing says it works on trailers with electric brakes or with hydraulic brakes, which matters to owners of boat trailers fitted with electric-over-hydraulic systems.

Settings are kept simple, with digital power, seven sensitivity settings and a vertical manual slide for applying the trailer brakes on their own. The unit carries short protection for up to eight trailer brakes. Hopkins designs the parts as separate components that mount wherever they fit best, with no tools or drilling required, which helps in a cramped Gladiator footwell where a large box would get in the way.

This suits owners who want a straightforward control without an app and who may tow a hydraulic-brake boat trailer as well as a camper. It does not have the phone setup or stored profiles of the Bluetooth units. Check which vehicle connection your Gladiator needs for it, since the listing asks you to verify the application, and confirm your year and trim before you order.

View Hopkins Insight on Amazon

6. CURT 51527 Quick Plug: Brake Controller Harness for Gladiator and Wrangler JL

CURT 51527 Harness product photo
Key features
  • Fits select Jeep Gladiator and Wrangler JL years
  • Plugs into the factory socket, no cutting or splicing
  • 12-gauge wire, 24 inch length
  • Slit-loom sleeve protects the wires

The CURT 51527 Quick Plug is not a controller but the vehicle-specific harness that connects one to your truck. It fits select years of the Jeep Gladiator and Wrangler JL, with one end that snaps into the factory brake controller socket and the other that connects to a CURT controller. That means no cutting or splicing into the Gladiator’s wiring.

The harness uses 12-gauge wire for consistent power between the controller, the truck and the trailer’s electric brakes, and its 24 inch length gives you some room to place the controller where it suits you. A slit-loom sleeve keeps the wires bundled and helps protect them from crushing and abrasion under the dash. CURT says it works with any CURT controller that has a quick plug connector, including proportional, inertia and time-delay models.

This is the part to add if you choose the CURT Spectrum or another CURT controller with a quick plug. It does not fit Tekonsha, REDARC or Hopkins units, which use their own harnesses, and it needs the factory socket to be there in the first place. Confirm your Gladiator year and trim on the listing before you buy.

View CURT 51527 Harness on Amazon

Matching the Controller to Your Trailer

Start with the trailer and the install you are willing to do, then the choice narrows quickly.

Your situationBraking typeInstallPick
Camper or boat, trail trips tooProportional, off-road modeKit with Gladiator harnessREDARC Tow-Pro Trail Kit
Factory look, hidden moduleProportionalAdd CURT 51527 harnessCURT Spectrum
Several trailers, phone setupProportionalTekonsha harness sold separatelyTekonsha Prodigy iD
Nothing in the cabProportional, app controlBehind a USCAR 7-wayCURT Echo In-Line
Electric over hydraulic brakesProportionalSeparate componentsHopkins Insight
Braking type and install method as stated on each listing. Confirm fit for your Gladiator’s year and trim.

Whichever unit you choose, set the gain with the trailer loaded the way you will actually tow it. Find an empty, level stretch, pull the manual lever at about 20 mph, and raise the output until the trailer wheels are just short of locking. Recheck it whenever the load changes a lot.

view with a bridge spanning the cliffs and ocean

A brake controller draws on the truck’s 12V system, and so do the trailer lights and the breakaway battery charge line. If the Gladiator already cranks slowly on a cold morning, sort that out first; our article on a car not starting in cold weather explains what the symptoms point to.

Salt, Cold and the Trailer Circuit

Around Grand Rapids, the 7-way socket spends the winter in tire spray full of road salt. Corroded pins and a weak ground are the usual reasons a controller shows a good connection but the trailer barely brakes. A Gladiator that tows a snowmobile trailer in January and a boat in June sees both extremes.

  • Keep the 7-way cover closed and put a little dielectric grease on the pins each fall.
  • Check the trailer plug and its ground wire for green crust before the first trip of spring.
  • Test the trailer brakes with the manual lever in the driveway before every trip.
tranquil dirt road divides lush corn and wheat fields under a pastel sunset sky

Add the 7-way socket and controller to your seasonal list; our Michigan winter car maintenance checklist covers the rest of the truck. If you tow north in snow season, keep a winter car emergency kit in the cab as well.

When a Shop Should Do the Wiring

Plugging a harness into the factory socket is a reasonable driveway job. Running new power and brake output wires on a truck without the tow package is not, since it means fusing a heavy feed from the battery and routing wire past hot and moving parts. Our car electrical repair in Grand Rapids covers that wiring and faults like a controller that never detects the trailer.

scenic winding road lined with cypress trees

Towing also works the truck’s own brakes hard. If the pedal feels soft after a long downhill, the Gladiator pulls to one side when you stop, or the rotors shudder, have us check the brakes on your Gladiator before the next trip.

Frequently Asked Questions

Does my Jeep Gladiator have a brake controller plug?

Gladiators with the factory trailer tow package usually have a brake controller connector under the dash. Trucks without the package may not. Look under the dash on the driver’s side, or check your window sticker, before buying a plug-in harness.

Do I need a separate harness for my controller?

Usually, yes. CURT and Tekonsha in-dash controllers need their own brand’s vehicle harness, such as the CURT 51527 for the Gladiator. The REDARC Tow-Pro Trail Kit includes a Gladiator harness in the box.

Will a brake controller let my Gladiator tow more?

No. A controller only runs the trailer’s brakes. Your towing and tongue weight limits come from Jeep for your trim and equipment, so use the owner’s manual and the door jamb placard.

What is the best trailer brake controller for Jeep Gladiator off-road use?

The REDARC Tow-Pro Trail Kit is built with that in mind. Its listing describes a manual off-road mode for steep descents, mud and sand, plus an everyday mode for the highway.

Trailer brakes grabbing, fading or not responding behind your Gladiator? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or book a trailer wiring check through our contact page.

Getting back from the campground after we close? Park the Gladiator in our after-hours drop-off at 456 Carrier St NE in Creston and leave a note on what the controller display showed.