456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Outback Hum or Crosstrek Growl? Choosing the Best Wheel Bearing for Subaru

best wheel bearing for subaru: 4x4 SUV with travelers in the vast

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A Subaru with a tired wheel bearing starts with a faint hum around 40 mph and grows into a growl that changes as you sweep through a curve. The best wheel bearing for Subaru owners is the hub assembly listed for your exact model, build date and corner, made by a brand that publishes its part numbers openly.

Below are the Subaru wheel-end basics and six listings for the Outback, Forester, Crosstrek, Impreza and Legacy. If you are not sure the noise is a bearing, our article on how long wheel bearings last and what wears them out is a good place to start.

Quick answer

Which wheel bearing should I buy for my Subaru?

Buy the hub assembly listed for your model, years, build date and position. MOOG 513413 covers the front of a 2014-2018 Forester or 2016-2021 Crosstrek, SKF BR930473 covers many 2005-2014 Outbacks and Legacys up front, and MOOG 512536 handles the rear of 2015-2021 Outbacks. Always confirm fit on Amazon first.

Our Quick Picks

Three listings that cover the common Subaru jobs: the front of a newer Forester or Crosstrek, the front of an older Outback and the rear of a newer Outback.

MOOG 513413 product photo
Crosstrek pick

MOOG 513413

Front hub assembly

A MOOG front hub for the newer compact Subarus that share one platform.

Suits2014-2018 Forester and 2016-2021 Crosstrek owners
View on Amazon →
SKF BR930473 product photo
Outback pick

SKF BR930473

Front hub assembly

An SKF front hub for the generation of Outback and Legacy built through 2014.

SuitsOwners of 2005-2014 Outbacks and Legacys
View on Amazon →
MOOG 512536 product photo
Rear hub pick

MOOG 512536

Rear hub assembly

A MOOG rear hub for the fifth- and sixth-generation Outback and Legacy.

Suits2015-2021 Outback and Legacy owners
View on Amazon →

How Subaru Wheel Ends Are Built

Because nearly every Subaru sold here is all-wheel drive, each corner has a CV axle running through the hub. On most models from the mid-2000s onward, the front and rear bearings come as sealed, bolt-on hub assemblies: the bearing, flange and wheel studs are one unit that bolts to the knuckle. Older cars and some rear positions still use press-in bearings.

Three details decide whether a listing is right for your car:

  • Position: front and rear hubs differ in flange shape, bolt pattern and spline count, so never assume one number covers both ends.
  • Build date: the 2014 Forester, Impreza and XV Crosstrek switched front hubs partway through the model year, so the listings split at January 2014 build dates. Check the label in the driver’s door jamb.
  • ABS setup: on these listings the wheel speed sensor is a separate part, and the hub carries either a magnetic encoder ring or nothing. Match what your old hub has.

For manuals and model-year details, start with Subaru’s vehicle resources page for owners before you compare part numbers.

OE Subaru Parts or an Aftermarket Brand?

Subaru’s own hubs are a safe choice, and aftermarket makers often publish the OE number their part replaces. Timken and SKF are bearing manufacturers first and list their hubs by Subaru part number. MOOG, part of DRiV, sells hubs by vehicle and lists the fitment openly on each listing.

MOOG describes its sealing approach on its MOOG hub assemblies page, including premium, high-utilization and coated lines, though features vary by application. Detroit Axle is the value option, often sold in pairs with a long listed warranty. For a broader look at the brands themselves, see our guide to the best wheel hub assembly brands.

Best Wheel Bearing for Subaru: Six Listings by Model

Each listing below is matched to the Subaru models it names. Years, trims and build dates vary, so run your car through Amazon’s fit checker before you order, and never assume one hub fits every version of a model.

1. MOOG 513413: Front Wheel Bearing and Hub Assembly for Forester and Crosstrek

MOOG 513413 product photo
Key features
  • Front hub assembly, sold singly
  • Lists 2014-2018 Forester, 2016-2021 Crosstrek
  • Also 2014-2019 Impreza, 2014-2015 XV Crosstrek
  • Quad lip seal, sealed bearing, studs fitted

MOOG 513413 is a front wheel bearing and hub assembly, and its Amazon listing names the 2016 to 2021 Crosstrek, the 2014 and 2015 XV Crosstrek, the 2014 to 2018 Forester and the 2014 to 2019 Impreza. These cars share their front hub design, which is why one number covers so many of them.

The listing describes a sealed bearing built to run quietly, a quad lip seal meant to keep moisture and grit out, a rust-resistant hub and wheel studs already pressed in. Because the studs come installed, you bolt the unit to the knuckle rather than pressing anything. MOOG is part of DRiV, and the listing gives a plain fitment list, which helps when you are checking a model year against the build-date split.

This hub suits owners of a newer Forester or Crosstrek with a hum that grows with speed and changes in long curves. The 2014 models are the tricky ones, since the front hub changed partway through the year, so check the build date on your door jamb label first. It is not the part for an older Forester or for the rear of the car. Confirm your year, model and engine in Amazon’s fit checker before you order.

View MOOG 513413 on Amazon

2. Timken HA590522: Wheel Bearing and Hub Assembly for Subaru OE 28473FJ000

Timken HA590522 product photo
Key features
  • Replaces Subaru 28473FJ000 and 28473FJ020
  • Cross-references to 512518
  • Vehicle-specific fit type
  • Preset, sealed hub assembly

Timken HA590522 is a wheel bearing and hub assembly whose Amazon listing identifies it by the numbers it replaces: Subaru 28473FJ000 and 28473FJ020, plus the common aftermarket number 512518. It does not name vehicles in its title, so it is a part to order by number. Listings for 512518 hubs place that number at the rear of the 2014 to 2018 Forester, 2012 to 2021 Impreza and 2016 to 2021 Crosstrek.

Timken is a bearing manufacturer with a long history in tapered and ball bearings, and the listing describes this unit as precision engineered and designed for long life, with a vehicle-specific fit type. Like other modern hub assemblies, it arrives preset and sealed, so there is no grease to pack and no endplay to adjust.

This hub suits owners who have the old part in hand or a parts catalog open and want to match the Subaru OE number exactly. If you already know your car takes 28473FJ000 at the rear, this is a straightforward choice from a bearing maker. Because the listing names no models, run your car through Amazon’s fit checker and compare the flange and stud layout with your old hub before you buy.

View Timken HA590522 on Amazon

serene and vast landscapes of Maranjab Salt Desert

3. SKF BR930473: Front Wheel Hub Bearing Assembly for Subaru 2005-2014

SKF BR930473 product photo
Key features
  • Front hub assembly, sold singly
  • Listing names Subaru 2005-2014
  • Includes components for the replacement
  • QR code links to SKF instructions

SKF BR930473 is a front wheel hub bearing assembly, and its Amazon listing names Subaru models from 2005 to 2014. In parts catalogs this number lines up with the front of the 2005 to 2014 Outback and Legacy, and Timken’s own listing for its HA590315 lists BR930473 among the numbers it replaces.

SKF is one of the largest bearing makers in the world, and the listing says the box includes the components needed for a complete wheel bearing replacement. A QR code on the label links to SKF’s installation instructions and technical information. The listing is also clear that the part should be installed by a knowledgeable mechanic with the correct tools, following both SKF’s instructions and the vehicle maker’s procedure.

This hub suits owners of an older Outback or Legacy with front wheel hum who want a part from a bearing manufacturer. It bolts to the knuckle, though on a salty Michigan car the old hub can be rusted in place and need some persuasion. It is not the part for the rear or for the 2015 and later Outback. Confirm your year, model and engine in Amazon’s fit checker before you order.

View SKF BR930473 on Amazon

4. MOOG 512536: Rear Wheel Bearing and Hub Assembly for 2015-2021 Outback

MOOG 512536 product photo
Key features
  • Rear hub assembly, sold singly
  • Lists 2015-2021 Outback and Legacy
  • Also 2019-2021 Ascent, 2019 Forester
  • Sealed bearing with quad lip seal

MOOG 512536 is a rear wheel bearing and hub assembly, the position other 512536 listings state, and the Amazon listing names the 2015 to 2021 Outback and Legacy. The same listing adds the 2019 to 2021 Ascent, the 2019 Forester and the 2015 to 2019 WRX and WRX STI.

The listing describes a sealed bearing designed to run quietly at highway speed, a quad lip seal to keep moisture and debris away from the bearing, a rust-resistant hub and wheel studs that come installed. As a bolt-on unit it replaces the bearing, flange and studs together, so the axle comes out of the hub and the old unit unbolts from the knuckle. A new axle nut is often called for, so check the service manual.

This hub suits owners of a newer Outback or Legacy with a hum or drone that seems to come from behind the seats, especially on the highway. Rear noise can travel through the body, so confirm which side is rough before you buy one or two. It is not a front hub, and it does not suit the older 2010 to 2014 Outback. Confirm your year, model and engine in Amazon’s fit checker first.

View MOOG 512536 on Amazon

detailed view of rusted metal car parts on grid

5. Detroit Axle Front Wheel Bearing Hubs: 2-Piece Set for 2005-2014 Outback and Legacy

Detroit Axle front pair product photo
Key features
  • Two front hub assemblies
  • Lists 2005-2014 Legacy and Outback
  • 5 lug, ABS encoder, 4-bolt square flange
  • 10-year warranty per listing

This Detroit Axle set includes two front wheel bearing and hub assemblies, and its Amazon listing names the 2005 to 2014 Subaru Legacy and Outback. It covers the same front position as the SKF BR930473 above but comes as a pair, which suits a car where both front bearings have high mileage. Each unit is listed with five lugs, an ABS encoder and a four-bolt square flange.

Detroit Axle sells chassis parts for foreign and domestic cars and trucks, and the listing states a 10-year warranty on these hubs. The ABS encoder is built into the bearing seal, so the separate wheel speed sensor reads it the same way it read the original. Match the flange and encoder setup to your old hubs.

This pair suits owners of an older Outback or Legacy who want to replace both front hubs in one visit and keep the cost down. Doing both sides together means you only take the front apart once, which is handy on a rusty car. It is not a rear part, and it does not fit the 2015 and later models. Confirm your year, model and engine in Amazon’s fit checker before you buy.

View Detroit Axle front pair on Amazon

6. Detroit Axle Front Wheel Bearing Hub: Single Unit for 2009-2014 Forester and Impreza

Detroit Axle front single product photo
Key features
  • One front hub assembly
  • Lists 2009-2014 Forester, 2008-2014 Impreza
  • 2014 cars built before 01/14/2014 only
  • 5 lug, ABS encoder, 4-bolt square flange

This Detroit Axle unit is a single front wheel bearing and hub assembly, and its Amazon listing names the 2009 to 2014 Forester, the 2008 to 2014 Impreza excluding STI models, the 2013 and 2014 WRX and the 2013 and 2014 XV Crosstrek. For the 2014 cars it covers only those built before January 14, 2014, and the 2014 Impreza must have the 2.5-liter engine. Later 2014 cars take the newer front hub covered by the MOOG 513413 above.

The listing gives five lugs, an ABS encoder and a four-bolt square flange, and says the parts go through impact, wear and fatigue testing. As a single unit it lets you replace just the corner that is worn, which helps when only one side has started to hum.

This hub suits owners of a third-generation Forester or the matching Impreza who want an affordable fix for a noisy front corner. Because of the mid-2014 changeover, read the build date on the door jamb label before you order. It is not a rear part and does not fit the 2015 and later Forester. Confirm your year, model, engine and build date in Amazon’s fit checker before you buy.

View Detroit Axle front single on Amazon

Which Listing Matches Your Outback, Forester or Crosstrek

The table sums up the six picks by the models and corner each listing names, so you can narrow down the best wheel bearing for Subaru models in your driveway before you open the fit checker.

ListingPositionModels the listing namesGood fit for
MOOG 513413Front2014-2018 Forester, 2016-2021 Crosstrek, 2014-2019 Impreza (2014 build-date split)Newer compact Subarus with front hum
Timken HA590522Rear (512518 cross-reference)Replaces Subaru 28473FJ000 and 28473FJ020Owners who order by OE number
SKF BR930473FrontSubaru 2005-2014Older Outback and Legacy owners
MOOG 512536Rear2015-2021 Outback and Legacy, 2019-2021 AscentFifth-generation Outback rear noise
Detroit Axle front pairFront, both sides2005-2014 Legacy and OutbackDoing both front corners at once
Detroit Axle front singleFront2009-2014 Forester and 2008-2014 Impreza built before 01/14/2014Third-generation Forester on a budget
The Subaru wheel bearings in this guide, matched to the position and models each Amazon listing names

Even the best wheel bearing for Subaru cars only helps if it goes on the corner that is actually worn, so confirm the noisy side first.

man working on tire repair outdoors

Road Salt, Potholes and Subaru Hubs in Grand Rapids

Plenty of Subarus earn their keep through West Michigan winters, and those winters are rough on wheel ends. Brine sprays the seals for months, and once water gets past a seal the bearing grease breaks down and the races start to pit. Spring potholes add impact loads that can dent a race in one hit.

Rust also makes the job harder. Hubs seize into the knuckle, bolts snap and the axle splines can stick to the hub, so penetrating oil and patience are part of the work here. If you hit a hole hard enough to worry you, our checklist of pothole damage signs covers what to look at next.

interior view of a vintage gas station

Cupped tires and tired struts can also rumble, so read our guide to the best shocks and struts for Subaru models and our rundown of wheel bearing noise symptoms before you buy parts.

Installing a Subaru Hub and When to Bring It In

A wheel hub is a safety part, so do the job with the car on stands and follow the factory service manual. Subaru axle nuts are staked on many models and should be replaced rather than reused, and the nut and hub bolts must go back to the torque figures the manual gives. Clean rust from the knuckle so the new hub seats flat.

picturesque view of an empty road stretching through rural Minnesota at sunset

Where a bearing presses into the knuckle instead of bolting on, you need the right adapters, which our guide to the best wheel bearing press kit covers. If the hub is fused to the knuckle or you would rather skip the rust fight, our wheel bearing replacement service in Grand Rapids handles foreign and domestic vehicles, Subarus included.

If a tie rod or control arm comes apart during the job, have the alignment checked, and our suspension repair team can inspect the rest of the front end.

Frequently Asked Questions

Is an OE Subaru wheel bearing better than Timken or SKF?

Not necessarily. Timken and SKF list the Subaru part numbers their hubs replace, so you can match them to the original. The right number for your corner and build date matters more than the logo.

How do I know if the front or rear bearing is bad on my Subaru?

Front noise usually sounds closer to you and changes more in curves, while rear hum can seem to come from the cargo area. With the car on stands, check each wheel for play and roughness by hand to confirm which one is worn.

Can I reuse the Subaru axle nut?

On many models the axle nut is staked into the axle groove and should be replaced. Check the service manual for your model, fit a new nut if it calls for one and torque it to the listed figure.

Hearing a hum from one corner of your Outback, Forester or Crosstrek? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a wheel bearing check on our contact page.

Can’t get away from work before five? The after-hours drop-off takes your keys in the evening, so leave the Subaru at 456 Carrier St NE with a note saying whether the hum swells in left or right curves.