As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A worn hub on a Chevy rarely fails all at once. It starts as a low drone on the highway. The best wheel bearings and hubs for Chevy trucks and crossovers are the ones listed for your exact model, generation, drive type and corner, because GM changed hub designs several times over the last twenty years.
This guide covers the Silverado 1500, Silverado 2500 HD, Tahoe, Equinox, Malibu and Traverse, with one listing matched to each. If you are still deciding whether the noise is really a bearing, start with our article on how long wheel bearings last and what shortens their life.
Quick answer
Which wheel hub should I buy for my Chevy?
Match the hub to your model, years, drive type and position. A-Premium’s 515160-style hub covers the front of a 2014-2018 Silverado 1500 4WD, MOOG 513288 suits the 2010-2017 Equinox, and Detroit Axle lists a 4WD front hub for the 2011-2019 Silverado 2500 HD. Check fit on Amazon before you order.
Our Quick Picks
Three listings that cover the most common Chevy jobs: the front of a newer half-ton 4WD truck, an Equinox crossover and a Duramax-era HD pickup.

A-Premium 515160-Style Front Hub
A front hub listed for the 2014-2018 half-ton trucks and their SUV siblings.

MOOG 513288
A MOOG hub listed for the second-generation Equinox and shared GM cars.

Detroit Axle HD 4WD Front Hub
A heavy-duty front hub for the 2011-2019 three-quarter and one-ton trucks.
Why Chevy Hubs Change from One Model to the Next
Almost every Chevy built since the late 1990s uses a sealed hub assembly at the front, and many use one at the rear too. The bearing, flange, wheel studs and often the ABS tone ring or sensor come as one unit that bolts to the steering knuckle.
What changes is the detail. A Silverado 1500 from the 2007-2013 generation and one from 2014-2018 take different front hubs, and a 4WD truck needs a splined hub that a 2WD truck does not. HD trucks and the crossovers use different hubs again.
- Drive type: 4WD and AWD hubs have a splined center for the front axle shaft. A 2WD hub is solid or has a different spline, so the two never swap.
- Generation: GM’s truck redesigns in 2007 and 2014 brought new hub numbers. Check your model year, and for split years, the build date on the door jamb.
- ABS setup: some hubs carry a sensor with a wire and plug, while others only carry the tone ring. The connector on the new hub must match your harness.
For the factory owner’s manual and model details, Chevrolet keeps a manuals and guides page for Chevy owners where you can confirm drive type and trim before comparing part numbers.
Reading a Chevy Hub Listing Before You Order
Good listings spell out the models, years, drive type, position and the reference numbers the hub replaces, such as 515160 or GM 20971870.
Brand also matters less than many owners think, as long as the maker publishes clear fitment. MOOG, Timken and SKF sell premium lines, while Detroit Axle, A-Premium and Autoround sit at the value end and often sell pairs. Our roundup of the best wheel hub assembly brands goes deeper on who makes what.
Best Wheel Bearings and Hubs for Chevy: Six Listings by Model
Each pick below is tied to the Chevy models and positions its listing names. Run your vehicle through Amazon’s fit checker first, and never assume one hub fits every version of a model.
1. A-Premium Front Wheel Bearing Hub: 4WD 6-Stud Assembly for 2014-2018 Silverado 1500

- Lists 2014-2018 Silverado 1500, 2015-2020 Suburban
- Front position, 4WD models only
- ABS sensor wire, 6 studs, 33 splines
- Reference numbers 515160 and 20971870
This A-Premium front wheel bearing and hub assembly is listed for the 2014 to 2018 Silverado 1500, the 2019 Silverado 1500 LD, the 2015 to 2020 Suburban and Tahoe models the listing names, plus the matching GMC and Cadillac trucks. The listing says 4WD models only and gives the reference numbers 515160 and GM 20971870 so you can compare it with the hub on your truck.
The listing gives a useful spec sheet: a sensor wire for the ABS, six wheel studs, a three-hole mounting flange, 33 axle splines and a 5.5 inch bolt circle. It describes a tapered roller bearing with inboard and outboard seals, and A-Premium states a one-year unlimited-mileage guarantee. Having the spline count and flange layout in writing makes it easier to rule out a 2WD hub or a part from the earlier generation.
This hub suits owners of a 2014 to 2018 four-wheel-drive Silverado 1500, or a Tahoe or Suburban from the same platform, with a front-end drone that rises with road speed. It is not for 2WD trucks, which take a different hub, or for the redesigned 2019 and later trucks beyond the LD model it names. Confirm the year, model, drive type and engine in Amazon’s fit checker before you order.
View A-Premium 515160-Style Front Hub on Amazon
2. Detroit Axle 4WD Front Wheel Bearing Hubs: 2-Piece Set for 2007-2013 Silverado 1500

- Two front hubs, left and right
- Lists 2007-2013 Silverado 1500 4WD, 6 stud
- Also 2007-2014 Tahoe and Suburban 1500 4WD
- ABS sensor wire, 3-bolt triangular flange
Detroit Axle sells this kit as a pair of front wheel bearing and hub assemblies for the 2007 to 2013 Silverado 1500 with 4WD and six studs. The listing also names the 2007 to 2014 Tahoe and Suburban 1500 in 4WD form, the 2007 to 2013 Avalanche and the GMC and Cadillac trucks built on the same platform. One box covers both front corners.
Per the listing, each hub has six bolts for the wheel, a sensor wire for the ABS, a three-bolt triangular flange and a 4WD drive type, and both the left and right positions are included. Detroit Axle states that its products go through impact, wear and fatigue testing. With few reference numbers listed, compare the drive type, lug count and flange shape with your old hubs.
This set suits a high-mileage half-ton truck or SUV from the 2007 generation where one front bearing is loud and the other is close behind. It is not the hub for a 2WD truck, an HD model or the 2014 and later redesign. Confirm year, model, drive type and engine with Amazon’s fit checker before buying, and never assume one listing covers every version of these trucks.
View Detroit Axle 4WD Front Hub Pair on Amazon

3. MOOG 513288: Wheel Bearing and Hub Assembly for 2010-2017 Chevrolet Equinox

- Lists 2010-2017 Chevrolet Equinox
- Also Buick LaCrosse, Regal, Cadillac XTS
- Sealed bearing with quad lip seal
- Studs fitted, rust-resistant hub
MOOG 513288 is a wheel bearing and hub assembly whose listing names the 2010 to 2017 Chevrolet Equinox along with a run of related GM cars: the 2010 to 2016 LaCrosse, the 2011 to 2017 Regal, the Cadillac XTS and some CTS years, and the 2016 Malibu Limited. It also lists the factory and aftermarket numbers it replaces, including GM 13502785 and 22859843.
The listing describes a sealed bearing designed for quiet running, a quad lip seal meant to keep out moisture and grit, a rust-resistant hub and wheel studs that come already installed. MOOG is part of DRiV, and the 513288 number is one the company publishes for this group of GM vehicles. The hub bolts on as a complete unit, so there is no bearing to press.
This hub suits an Equinox from the second generation with a growl from one corner that grows with speed. The same number appears at more than one position on some of these vehicles, so confirm the position your Equinox needs in the fit checker. It is not the part for the 2018 and later Equinox, which uses a different hub. Check the year, model and engine on Amazon before you order.
4. Autoround 512661: 5-Lug Wheel Hub Assembly Pair with ABS for 2016-2022 Chevy Malibu

- Lists 2016-2022 Chevrolet Malibu, all models
- Sold as a pair, 5 lugs with ABS
- 146 mm flange, 115.1 mm bolt circle
- Replaces 512661, BR930988, 13543412
The Autoround 512661 listing is a pair of wheel hub assemblies that names the 2016 to 2022 Chevrolet Malibu, all models. It groups the Malibu with the rear position on several FWD Buick models and the front of the RWD Cadillac CT4, and the title calls it a front or rear part. That mix is common for this number, so treat the position for your Malibu as something to confirm rather than assume.
Autoround lists five lugs, an ABS system, a 146 mm flange diameter, a 42 mm flange offset and a 115.1 mm bolt circle. It also gives the numbers it replaces: 512661, SKF BR930988, WE61831 and GM 13543412. The maker states three years of after-sales service through its Amazon store and says the hubs are quality tested against OEM standards.
This pair suits a Malibu owner who wants both hubs on one axle done at once and prefers a value brand. It is not for the earlier Malibu generations, which take different hubs, and pairs are only worthwhile if the other side is also worn or high in mileage. Confirm the year, model, engine and position for your Malibu in Amazon’s fit checker before you buy.
View Autoround 512661 Pair on Amazon

5. MOOG 513277: 6-Lug Wheel Bearing and Hub Assembly for 2009-2017 Chevrolet Traverse

- Lists 2009-2017 Chevrolet Traverse
- Also 2007-2016 Acadia, 2008-2017 Enclave
- Sealed bearing with quad lip seal
- Studs fitted, rust-resistant hub
MOOG 513277 is a wheel bearing and hub assembly listed for the 2009 to 2017 Chevrolet Traverse. Its compatibility line also names the 2007 to 2016 GMC Acadia, the 2017 Acadia Limited, the 2008 to 2017 Buick Enclave and the 2007 to 2010 Saturn Outlook. These three-row crossovers share one platform, which is why a single MOOG number reaches across so many badges.
The listing points to a sealed bearing built for quiet running, a quad lip seal to keep water and dirt out of the grease, a rust-resistant hub and wheel studs fitted at the factory. Because the whole hub bolts to the knuckle as one unit, no pressing is needed, and the fitted studs save another step.
This hub suits a first-generation Traverse with a hum that changes as you weave gently at highway speed. On some of these crossovers the same number covers more than one corner, so let the fit checker confirm the position for your drive type. It is not the part for the redesigned 2018 and later Traverse. Confirm the year, model, engine and drive type on Amazon before you order.
6. Detroit Axle 4WD Front Wheel Bearing Hub: 8-Bolt Assembly for 2011-2019 Silverado 2500 HD

- Lists 2011-2019 Silverado 2500 HD 4WD
- Also 3500 HD 4WD with single rear wheels
- 8 bolts, ABS on hub, 4-bolt square flange
- One hub, front left or right
This Detroit Axle front wheel bearing and hub assembly is listed for the 2011 to 2019 Chevrolet Silverado 2500 HD with 4WD and the 3500 HD with 4WD and single rear wheels, plus the GMC Sierra versions of both. Many of these trucks carry the Duramax diesel, and its weight up front, along with plow and trailer duty, works the front hubs hard. The kit is a single hub that fits either the left or right front corner.
The listing gives eight wheel bolts, ABS on the hub, a four-bolt square flange and a 4WD drive type, and Detroit Axle states a 10-year warranty on this listing. Those details separate it from the six-lug half-ton hubs, which will not fit an HD truck. Many owners replace both front hubs on a high-mileage diesel truck to keep the two sides even.
This hub suits an HD truck from the 2011 generation with a front growl, play in the wheel or an ABS warning tied to one front corner. It is not for 2WD trucks, dually 3500 HD models or the 2020 and later trucks. Confirm year, model, engine and drive type in Amazon’s fit checker before buying, and torque the hub bolts and axle nut to the service manual figures.
View Detroit Axle HD 4WD Front Hub on Amazon
Matching Each Listing to Your Silverado, Tahoe or Crossover
The table lines up the six picks by the Chevy models, drive type and corner each listing gives, which narrows the best wheel bearings and hubs for Chevy owners down to one or two numbers before you open the fit checker.
| Listing | Chevy models named | Position and drive | Sold as |
|---|---|---|---|
| A-Premium (515160 ref) | 2014-2018 Silverado 1500, 2015-2020 Tahoe and Suburban | Front, 4WD only, 6 studs | Single hub |
| Detroit Axle 4WD front pair | 2007-2013 Silverado 1500, 2007-2014 Tahoe and Suburban | Front left and right, 4WD, 6 studs | Pair |
| MOOG 513288 | 2010-2017 Equinox, plus several Buick and Cadillac models | Confirm position for your model | Single hub |
| Autoround 512661 | 2016-2022 Malibu, all models | Front/rear listing, 5 lugs, ABS | Pair |
| MOOG 513277 | 2009-2017 Traverse, plus Acadia and Enclave | Confirm position for your model | Single hub |
| Detroit Axle HD 4WD front | 2011-2019 Silverado 2500 HD, 3500 HD single rear wheel | Front, 4WD, 8 bolts | Single hub |
Confirm which corner is worn before you buy, and our guide to wheel bearing noise symptoms explains how to tell the sides apart on a road test.

Salt, Potholes and Chevy Hubs in West Michigan
Grand Rapids winters work against every hub seal. Months of brine get thrown at the wheel ends, and once water slips past a seal, the grease thins out and the races begin to pit. Spring potholes then add sharp impacts.
Rust also makes the swap harder here. Hubs corrode into the knuckle and bolts seize. If you clipped a deep hole recently, our list of signs of pothole damage covers what else to check while the wheel is off.

The Car Care Council’s car care guide is a handy checklist for staying ahead of wear on the parts around the hub.
Fitting a Chevy Hub Safely and When to Hand It Over
A hub assembly is a safety part. Support the vehicle on stands, follow the factory service manual and torque the hub bolts and axle nut to the figures it lists for your model, never by feel. Clean rust from the knuckle face so the new hub seats flat.

Most of these Chevy hubs bolt on, but some older rear axles and other applications use bearings pressed into a carrier, and our guide to the best wheel bearing press kit covers the tools for that work. If the hub is rusted solid in the knuckle or you would rather skip the fight, our wheel bearing replacement service in Grand Rapids handles foreign and domestic vehicles, Chevys included.
If a tie rod end, ball joint or control arm has to come apart to reach the hub, get the alignment checked afterward. Our suspension repair service can check the front end too.
More Buying Guides
Frequently Asked Questions
Can I put a 2WD hub on a 4WD Silverado?
No. A 4WD Silverado needs a hub with a splined center for the front axle shaft, and a 2WD hub does not have one. Order the hub that the listing names for your drive type and generation.
Should I replace Chevy wheel hubs in pairs?
It is not required, but on a high-mileage truck the other side often is not far behind. Buying a pair saves a second job later, and several listings here are sold that way.
Does a new hub come with the ABS sensor?
It depends on the application. Many Chevy truck hubs include a sensor wire, while crossover hubs often carry only the tone ring. Check the listing and compare the connector to your old hub.
Is your Silverado, Tahoe or Equinox droning louder every week? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a wheel bearing inspection through our contact page.
Tied up at work all day? Bring the Chevy by after hours, leave it in the drop-off at 456 Carrier St NE, Grand Rapids, and jot down the speed where the drone starts.
