456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

One Camry Hub, Two Makers: Timken vs SKF Wheel Bearings

timken vs skf wheel bearings: ethnic males having problem in motor under hood of car on city street

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A wheel that hums louder as speed climbs usually sends its owner to a parts site, and two bearing names sit near the top of nearly every result. The timken vs skf wheel bearings question sounds like it should have one answer, yet both companies sell OE-grade hub units for the same cars, often under part numbers that cross-reference each other directly.

So this page does two things. It looks at what each maker says about itself, then sets one hub assembly from each brand side by side for one car and one corner: the rear left of a 2012-2017 Toyota Camry. A MOOG hub for that same position joins them as a third option. For a wider look at more brands, our roundup of wheel hub assembly brands covers the rest of the field.

Quick answer

Should you buy a Timken or an SKF wheel bearing?

Either brand is a sound OE-grade choice, so order the one listed for your exact vehicle, side and ABS setup. On the 2012-2017 Camry rear, Timken HA590429 names SKF BR930842 as the part it replaces. SKF adds printed instructions by QR code. Neither listing states a warranty term.

Our Quick Picks

A Timken and an SKF rear left hub for the same 2012-2017 Camry corner, with MOOG’s 512454 added as a third option for that spot. Each one gets a full review below.

Timken HA590429 product photo
Timken pick

Timken HA590429

Hub unit, rear left, Camry

Sealed rear hub whose title lists the OE and SKF numbers it replaces.

SuitsOwners who can read the part number on the old hub
View on Amazon →
SKF BR930842 product photo
SKF pick

SKF BR930842

Hub assembly, rear left, Camry

Rear hub sold with its fitting hardware and QR-linked instructions.

SuitsDIYers who start from the car and want written steps
View on Amazon →
MOOG 512454 product photo
MOOG pick

MOOG 512454

Hub assembly, rear, 512454

Rear hub with a quad lip seal and rust-coated wheel studs.

SuitsDrivers on salted roads who want seal details spelled out
View on Amazon →

Two Bearing Makers With Long Histories

Timken is an American company that describes itself today as a motion technology partner. Its company overview page points to more than 125 years of specialized expertise and research in materials science and friction management. Most of what that page talks about is industrial work, so treat the hub you buy on Amazon as one branch of a much larger engineering business.

SKF dates its work with the car industry back to 1907, and that work now runs under a separate name. The SKF Vertevo site explains that the automotive bearing business is a standalone spin-off from SKF that partners with carmakers from the design stage and also supplies the aftermarket. Boxes and Amazon listings still carry the SKF name, so that is the label you will see when you order.

Bolt-in hubs and press-in bearings

Both brands sell two kinds of wheel-end parts. A hub assembly is a sealed unit with the flange, bearing and often the ABS sensor already built in, and it bolts to the knuckle. A press-in bearing is the bare bearing alone, which has to be pushed out of the knuckle and a new one pressed in with the right tools.

The Camry shows both styles on one car. Its front corners use a pressed bearing, and its rear corners use a bolt-in hub. We compare the rear here because each brand sells its own listing for that exact position on Amazon, while the front bearing from Timken is mostly offered through resellers in multi-packs.

Timken vs SKF Wheel Bearings Side by Side for One Camry Corner

The three hubs below fill the same spot. Timken’s listing title names Toyota number 4246006070, SKF BR930842 and the industry number 512454, which is also MOOG’s own part number, so this is a true like-for-like set. Every row comes from the Amazon US listings, and where a listing is silent, the table says so.

PointTimken HA590429SKF BR930842MOOG 512454
TypeBolt-in hub bearing unitBolt-in hub bearing assemblyBolt-in hub bearing assembly
Position namedNot stated in title; replaces BR930842 and 512454Rear leftNot stated; sold as 512454
Vehicles namedNot stated; Toyota 4246006070 cross-referenceToyota 2012-2018, Lexus 2016-2018Camry 2012-2017, Avalon, Lexus ES350 and ES300h
Build claimsPreset, pre-greased and pre-sealedMeets or exceeds OE specificationsQuad lip seal, coated studs, raceway design
What’s in the boxOne hub (package quantity 1)All components needed for the replacementNot stated
InstructionsNot statedQR code on the box labelNot stated
Warranty in listingNot statedNot statedNot stated
Timken HA590429, SKF BR930842 and MOOG 512454 compared from their Amazon US listings for the 2012-2017 Camry rear left

On paper the three are very close, which is what you would expect from parts built to one OE number. The real differences sit in how each listing is written: Timken leads with part number cross-references, SKF with fitment years and installation support, and MOOG with seal and corrosion features.

Timken vs SKF Wheel Bearings: Three Rear Hubs Up Close

All three hubs below are for the driver side rear. The passenger side partners for the first two are Timken HA590424 and SKF BR930841, and if the right side also needs replacing, buy it from the same brand so the two rear wheels behave alike.

Timken HA590429: Preset Rear Hub Bearing Unit, Replaces Toyota 4246006070 and 512454

Timken HA590429 product photo
Key features
  • Bolt-in hub bearing unit, OE-grade
  • Replaces 4246006070, BR930842 and 512454
  • Preset, pre-greased and pre-sealed
  • Fit check through Amazon Confirmed Fit

The HA590429 is a complete hub bearing unit from Timken’s preset, pre-greased and pre-sealed range, and the listing calls it an OE-grade replacement. Its title spells out the numbers it replaces: Toyota 4246006070, SKF BR930842, 102376, 512454 and H512454. Parts catalogs place that number at the rear left of the 2012-2017 Toyota Camry, and the right side partner is Timken HA590424.

Because the bearing is set, greased and sealed at the factory, there is nothing to adjust or pack during the install. The hub arrives as one piece that bolts to the rear knuckle, so no bearing press is needed. The listing gives a package weight of about 7.36 pounds and a quantity of one, which means a pair for both rear corners is two separate orders.

The title does not name a vehicle, a side or the ABS sensor, so run the Amazon fit check and compare the connector with your old hub before you fit it. It suits someone who has the failed part in hand or a catalog number to match. No warranty term appears on the listing, so check the box or ask the seller about coverage.

View Timken HA590429 on Amazon

old vehicle dashboard with superhero figurines and Florida plate

SKF BR930842: Rear Left Wheel Hub Bearing Assembly for Toyota 2012-2018 and Lexus 2016-2018

SKF BR930842 product photo
Key features
  • Rear left hub bearing assembly
  • Listed for Toyota 2012-2018, Lexus 2016-2018
  • All components needed for the job included
  • Fitting instructions by QR code on box

The BR930842 is SKF’s rear left wheel hub bearing assembly, listed as compatible with Toyota models from 2012 to 2018 and Lexus models from 2016 to 2018. It is the part number that Timken’s HA590429 names as a cross-reference, so the two fill the same driver side rear position on the 2012-2017 Camry. The matching right side unit is SKF BR930841.

SKF says the box includes all the components needed to do a complete wheel bearing replacement, and that the part meets or exceeds OE specifications. A QR code on the box label links to SKF’s installation instructions and to more detailed technical information for the part. The listing also states plainly that the hub must be installed by a knowledgeable mechanic using the correct tools and following both SKF’s steps and the vehicle’s own procedure.

Like the Timken, this is a bolt-in unit, so no press is needed at the rear. It suits a driver who knows the year and model and wants instructions on hand. The broad Toyota and Lexus range means you must still enter your exact model and trim in Amazon’s fit checker, and the listing states no warranty term.

View SKF BR930842 on Amazon

low angle shot of an industrial steel and concrete ceiling structure

MOOG 512454: Rear Wheel Bearing and Hub Assembly with Quad Lip Seal for 2012-2017 Camry

MOOG 512454 product photo
Key features
  • Bolt-in hub assembly, part number 512454
  • Listed for Camry, Avalon, Lexus ES350 and ES300h
  • Quad lip seal against water and dirt
  • Coated wheel studs to resist rust

MOOG sells this unit under 512454, the same industry number printed in the Timken HA590429 title, so it slots into the identical rear position on the 2012-2017 Camry. Its listing names a wider group of cars than the other two picks: the Toyota Avalon, the 2016-2019 Lexus ES350 and the 2013-2018 Lexus ES300h appear beside the Camry.

Where the Timken and SKF listings stay brief on construction, MOOG describes several features. A quad lip seal is meant to keep moisture and road grit away from the rolling elements, and an application-specific raceway design is said to cut stress and heat for a longer service life. The wheel studs carry a coating that resists rust, which MOOG says makes later removal and correct torqueing easier, a fair point on cars that see salted roads.

Like the other two, this hub bolts to the knuckle, so the rear job needs no press. The listing asks buyers to check the Amazon Confirmed Fit bar with year, make, model, engine and trim, and to read any qualifier notes. It suits an owner who puts seal and corrosion protection first. No warranty term or instruction sheet is mentioned, so confirm both with the seller.

View MOOG 512454 on Amazon

Where the Two Brands Differ

How each listing helps you confirm fit

Timken writes its titles around numbers. The HA590429 title lists the Toyota part, the SKF part and several aftermarket numbers it replaces, which is handy if you have the old hub in hand and can read its stamp. SKF writes its titles around vehicles, naming the corner and the model years, which helps if you are starting from the car rather than the part.

Neither approach replaces Amazon’s fit checker. Enter year, trim and engine, including whether it is a hybrid, before you add any of these hubs to the cart.

ABS sensor and connector

The rear hub on this generation of Camry carries the wheel speed sensor that feeds the ABS and stability systems. None of the three listings describes that sensor in its bullet points, so compare the connector and the cable length against your old hub before you install. A wrong or damaged sensor can switch on the warning light covered in our article on an ABS light that stays on.

yellow crane hook in an industrial steel facility

Warranty and support, as listed

None of the three listings gives a warranty term, so do not assume one. SKF does say that its instructions and technical details can be read by scanning the QR code on the box label, and that the part should be fitted by a knowledgeable mechanic using the correct tools. Timken’s listing sticks to package data and the Amazon fit check, and MOOG’s points to the same fit bar.

Choose Timken If, Choose SKF If

Since all three hubs replace the same factory part, the choice usually comes down to what you already have and how you shop. The table below sorts out the common cases.

Your situationBetter fitWhy
You have the old hub and can read its part numberTimken HA590429Title lists the numbers it replaces
You are working from year and model onlySKF BR930842Title names the corner and model years
You want written fitting stepsSKF BR930842Instructions linked by QR code on the box
The other side already has one brandSame brandKeeps the pair matched across the axle
Your car sees salted winter roadsMOOG 512454Lists a quad lip seal and coated studs
Warranty in writing matters mostAsk the seller firstNo listing states a term
SKF, Timken and MOOG hubs matched to common rear wheel bearing situations

If you own a different Toyota, or you need the pressed front bearing rather than the rear hub, our Toyota wheel bearing guide goes through the common models one at a time.

Road Salt and the Rear Hub Job

West Michigan winters are rough on wheel ends. Salt brine creeps into the seam where the hub flange sits in the knuckle, and after a few seasons the old hub can rust in place even after every bolt is out. Spray the bolts and the flange edge with penetrant the night before, and expect to work the hub loose rather than lift it straight off.

man fixing a vintage car engine outdoors

The rear brake parts come off first, and their slide pins and bracket bolts are often just as corroded. Clean the knuckle bore down to bare metal before the new hub goes in, because scale left behind can cock the flange and cause runout. Tighten the hub bolts to the figure in your service manual, never by feel.

Freeze-thaw potholes also take a toll, since one hard hit can dent a bearing race. If the noise started after a bad impact, read our notes on pothole damage signs and check the tire and wheel too. For the pressed front bearing, a bearing press kit is needed, and our wheel bearing press kit guide explains the adapter sets.

When a Shop Should Take Over

First make sure the bearing is really the problem. A growl that changes as you weave, play at the top and bottom of the tire and an uneven hum on the highway are the usual clues, and our guide to wheel bearing noise symptoms walks through each one. To see what shortens bearing life in the first place, read how long wheel bearings last.

red garage doors with retro-style signage for repairs and petrol

A seized hub, a snapped bolt or a front bearing that needs pressing is a good point to hand the car over. We do wheel bearing replacement in Grand Rapids, and we look over the brakes and the ABS sensor while the corner is apart. Hendrick Hoffman, who runs the shop, is ASE and State of Michigan certified in brakes and in steering and suspension, the two areas this job touches. If the noise turns out to be from links or bushings, our suspension repair service covers those too.

Frequently Asked Questions

Is Timken better than SKF?

Not in any general way. Both sell OE-grade hub units, and on the 2012-2017 Camry rear the Timken HA590429 lists SKF BR930842 as a part it replaces. Pick the one listed for your exact year, trim and corner.

Should I replace both rear hubs at once?

Only the failed side needs replacing, but if the other hub is also high mileage or noisy, doing both saves a second job. When you do, use the same brand on both sides.

Do I need a press to fit a Camry rear hub?

No. The rear unit bolts to the knuckle, so basic hand tools, penetrant and a torque wrench are enough. The front bearing on this Camry is pressed into the knuckle and does need a press or a press kit.

What about NSK or Koyo bearings?

Both are also known bearing makers, and their parts turn up in the same catalogs. This page centers on Timken and SKF, with MOOG as the only other pick, so check that any further brand lists your exact vehicle and corner before you compare.

Hearing a hum that grows with speed? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or ask for a wheel bearing check on our contact page.

Tied up during our hours? Bring the car to 456 Carrier St NE whenever suits you and use the after-hours drop-off, and we will take it from there.