As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Level the nose of an F-150 and the parts search narrows fast. The bilstein vs rough country choice comes up on nearly every truck forum, and the two brands could hardly be further apart in how they package a front strut.
Below we compare the companies and their truck lineups, then line up three front strut listings on a single reference truck: the Bilstein 5100 plus Rough Country’s N3 and M1 pairs, each fitted to the 2015-2020 Ford F-150 and raised a little at the front to cancel the factory rake. For other F-150 options at stock height and leveled, see our guide to F-150 struts by model year.
Quick answer
Should a leveled F-150 run Bilstein or Rough Country struts?
Choose the Bilstein 5100 for a 46mm monotube strut with adjustable height, if you can move the factory springs over. Choose the Rough Country N3 loaded pair for a fixed 2-inch level that bolts in with springs fitted. Rough Country’s M1 pair adds a 0-2 inch adjustable range. Align the truck afterward.
Our Quick Picks
Two Rough Country lines and one Bilstein front strut for the 2015-2020 Ford F-150, leveled: the fixed-height N3 pair and the adjustable M1 pair sit beside the 5100. All three are covered in full below.

Bilstein B8 5100 24-336987
Adjustable-height 5100 strut that reuses the truck's factory spring and mount.

Rough Country N3 Loaded Leveling Struts
Assembled 2-inch leveling struts that bolt in with no spring compressor.

Rough Country M1 Adjustable Leveling Struts
M1 struts with a seamless 2-inch tube and a 0-2 inch height range.
Who Makes What: The Two Brands Behind the Parts
Bilstein is a German damper maker with a long history in the mono-tube gas shock, and it builds dampers for new vehicles as well as for the parts market. In the truck aftermarket, its yellow-bodied 5100 series is the line most owners know. Bilstein builds those around a single large tube with a separated high-pressure gas chamber.
Rough Country is an American lift and leveling brand. Its catalog covers spacer kits, complete lift kits, bumpers and lights, plus its own shocks and struts sold on their own or bundled with lifts. For the F-150, it lists N3 struts at stock height, 2-inch leveling height and several lifted heights, plus a separate M1 line with adjustable ride height.
How the lineups line up
On a half-ton pickup, Bilstein’s 5100 ride-height adjustable strut sits in the middle of its range. Above it sit the 6112 coil-over kits, which come with their own springs, and below it the B6 4600 for trucks at factory height. So you can match a Bilstein part to most plans, whether that means keeping it stock, leveling or going taller.
Rough Country splits its range by price and height instead. The N3 is the everyday choice, offered at several fixed heights with many sold as loaded struts, and the M1 steps up to a 2-inch seamless body, a 46mm piston and a spring seat you can adjust. Every Rough Country listing names one ride height, so pick the number that matches the stance you want.
Bare Strut or Loaded Strut: What Arrives in the Box
This is the biggest practical gap in the bilstein vs rough country struts matchup on this truck. The Bilstein 24-336987 is a bare front strut. It arrives as the damper body alone, and you move the factory coil spring and upper mount onto it.
Taking a spring off a strut means compressing it first, and a coil spring under load stores enough energy to cause serious injury if it slips. Use a proper tool and read our coil spring compressor buying guide before you try it at home. Many owners simply have a shop do the spring transfer.
The Rough Country N3 pair arrives loaded, with the spring and top mount already on each strut. That turns the job into an unbolt and bolt-in swap with no compressor involved. The trade-off is that you give up your factory springs and accept the single 2-inch height the kit is built for.
Bilstein vs Rough Country Struts Side by Side on a 2015-2020 F-150
All three parts below are front struts for the 13th-generation F-150. Facts in the table come from the matching Amazon US listings, so anything a listing leaves out is marked that way rather than guessed.
| Point | Bilstein B8 5100 24-336987 | Rough Country N3 B07SHHXWHB | Rough Country M1 B0BDSPPCQD |
|---|---|---|---|
| Vehicle named | 2015-2020 Ford F-150, front | 2014-2027 Ford F-150 4WD, front | 2014-2027 Ford F-150, front |
| What you get | One bare strut | Two loaded struts with springs | Two struts, title does not say loaded |
| Construction | 46mm monotube | 1-3/8 inch bore, nitrogen charged | 2-inch seamless tube, 46mm digressive piston |
| Ride height | Adjustable, range not stated in listing | Fixed 2-inch lift | Adjustable, 0-2 inch lift |
| Spring compressor | Needed to move the factory spring | Not needed | Check product details first |
| Warranty in listing | Not stated | 3-year limited | Limited lifetime replacement |
Note the count: one Bilstein listing covers a single corner, so you order two, while each Rough Country listing, N3 or M1, already holds a pair. Compare like for like when you weigh the cost of each route.
Bilstein vs Rough Country: Three F-150 Front Struts in Detail
Each part below is listed for the front of the F-150, and the left and right sides must match. Before you buy, enter your year, cab, drive type and trim in Amazon’s fit checker, since a single listing is never a guarantee for every version of the truck.
Bilstein B8 5100 24-336987: Ride Height Adjustable 46mm Monotube Front Strut for 2015-2020 F-150

- Listed for the 2015-2020 Ford F-150 front
- Ride height adjustable B8 5100 design
- 46mm monotube shock body
- Sold as one bare strut, collapsed length 16.05 in
The 24-336987 is Bilstein’s B8 5100 ride height adjustable front strut, and its Amazon title names the 2015-2020 Ford F-150. The listing covers a single unit with a collapsed length of 16.050 inches, so you need two of the same part for the front axle. The title does not say 2WD or 4WD, so confirm your drive type, cab and trim in the fit checker before you order.
At its core is a 46mm monotube body, the single-tube layout Bilstein is known for, with the gas charge kept apart from the oil. That design gives the damping oil room to shed heat, which helps on long washboard roads or when the bed is loaded. The ride height adjustable design lets you set the spring seat at more than one position, so the front can be raised to level the truck or left near stock. The listing does not state a lift range or warranty term, so check Bilstein’s instructions and the box.
This is a bare strut, so the factory coil spring and upper mount move over from the old unit, and that takes a spring compressor. It suits owners who want control under load and some say in the final height. It does not suit someone who wants a no-tools, springs-included swap.
View Bilstein B8 5100 24-336987 on Amazon

Rough Country N3 Loaded Leveling Struts: 2-Inch Lift Front Pair with Pre-Loaded Coils for F-150 4WD

- Listed for the 2014-2027 Ford F-150 4WD
- Raises the front 2 inches to level the truck
- Pre-loaded coil springs, set of 2
- 3-year limited warranty, as the listing states
This Rough Country listing is a front pair of N3 loaded leveling struts for the F-150 4WD, with the title naming 2014-2027 and a 2-inch lift. The 2021 and later F-150 is a newer generation, so treat that wide year span with care and enter your exact year, cab and trim in the fit checker. On our reference 2015-2020 truck, the kit is meant to remove the factory rake by raising the front end.
Each strut has a 1-3/8 inch bore, nitrogen gas charging and what Rough Country calls precision valving. The listing also mentions low-friction shock oil and Infinitely Variable Damping, which the maker says adapts to changing road conditions for a ride close to factory comfort. A hardened chromed piston rod and a silver powder coat are there to resist corrosion, and the listing states a 3-year limited warranty.
Because each strut comes fully assembled with its coil spring, the install is a bolt-out, bolt-in job with no spring compressor. It suits owners who want a level look and fresh springs in one step. It does not suit anyone who wants to adjust the height later or keep the factory springs.
View Rough Country N3 Loaded Leveling Struts on Amazon

Rough Country M1 Adjustable Leveling Struts: 0-2 Inch Lift Front Pair with 46mm Digressive Piston for F-150

- Listed for the 2014-2027 Ford F-150 front
- Adjustable ride height from stock to a 2-inch lift
- 2-inch seamless tube around a 46mm digressive piston
- Limited Lifetime Replacement Warranty, per the listing
Rough Country’s M1 is the step above its N3 line, and this listing pairs two adjustable leveling struts for the F-150 with a 0-2 inch lift range named in the title. The title spans 2014-2027 and does not name a drive type, so a 2021 or later truck, or a 2WD model, needs a careful pass through the fit checker before you commit.
The body is a 2-inch seamless extruded tube wrapped around a 46mm digressive piston, the same 46mm figure Bilstein quotes for its 5100. Rough Country describes self-adjusting, deflective-disc valving with independent rebound and compression circuits, riding on an 18mm case-hardened, chromed and polished rod. The listing backs the pair with the maker’s Limited Lifetime Replacement Warranty, the longest coverage named among our three picks.
Unlike the N3 pair, this title never calls the struts loaded, so plan for the spring to move across from the old strut unless the product details say otherwise, which means a compressor or a shop. They suit owners who like the Rough Country route but want to choose anywhere from stock height to a full 2-inch level. They do not suit someone after a springs-included, bolt-in afternoon.
View Rough Country M1 Adjustable Leveling Struts on Amazon
Picking a Side by How You Use the Truck
Neither brand is the right answer for every owner. The better fit depends on what the truck carries, where it goes and how much work you want to put into the install.
| Driver type | Better match | Why |
|---|---|---|
| Wants the level look with a quick bolt-in job | Rough Country N3 | Springs come fitted, no compressor |
| Tows or hauls often | Bilstein 5100 | Monotube build aimed at control under load |
| Wants to fine-tune front height | Bilstein 5100 | Adjustable spring seat |
| Factory springs are tired or sagging | Rough Country N3 | Replaces the springs along with the struts |
| Drives gravel roads and two-tracks often | Bilstein 5100 | Large monotube body copes with heat on rough miles |
| Likes Rough Country but wants a choice of height | Rough Country M1 | 0-2 inch range on a 46mm piston |
F-150 owners on forums and Reddit often call the 5100 firmer and more controlled, and many say the N3 loaded struts ride close to stock while giving a cleaner stance. Take those reports as opinion, since tires, pressures and payload shape ride feel as much as the strut does.
If you are still deciding between OE-style replacement brands for a car or crossover rather than a leveled pickup, our KYB and Monroe strut comparison covers that tier. For a wider look across brands and body styles, see our daily driver shocks and struts roundup.
Leveling Side Effects and Install Notes
Raising the front of an independent front suspension truck changes the angle of the control arms, tie rods and, on 4WD models, the front CV axles. A modest level is common on this truck, but going taller than the part is designed for can wear boots and joints faster. Stay within the height the maker lists for your strut.

The front strut on the F-150 helps locate the wheel, so camber and toe shift once the truck sits higher. Book a wheel alignment as soon as both struts are in, before the tires start to wear on one edge. Replace the struts as an axle pair from the same brand and line so both sides damp alike.
Expect the rear shocks to matter too. Leveling the front leaves the rear at factory height, and a set of tired rear shocks will make the new front end feel out of step. If the rears are original and the truck has high miles, plan to replace them in the same visit.
Salt, Potholes and a West Michigan Pickup
Grand Rapids trucks spend months driving on brine and road salt, and the lower strut bolts and sway bar link nuts on an F-150 rust in place. Spray them with penetrating oil the night before, and keep new hardware on hand in case a bolt snaps. Corroded fasteners turn a two-hour job into an afternoon.

Spring thaw brings potholes, and a leveled truck on larger tires hits them harder through the front end. The Car Care Council’s vehicle systems overview lists potholes among the operating conditions that wear suspension parts and suggests a steering and suspension check at least once a year. A spring check in April is a sensible habit around here.
Whichever brand you choose, rinse the underside after salt season and look at the strut bodies when you change tires. Oil streaking down a strut, a torn boot or a clunk over expansion joints means it is time to plan the next step.
When a Shop Visit Makes More Sense
Not sure the old struts are worn out yet? Our article on how to tell if struts are bad covers bounce, nose dive, leaks and cupped tires. A squeak when the truck rolls over a speed bump may point to bushings or links instead, as our piece on why a car squeaks when going over bumps explains.

If you would rather not compress springs, the bolts are seized or you want the alignment handled in the same visit, our team offers suspension repair in Grand Rapids. Hendrick Hoffman holds ASE and State of Michigan certification in steering and suspension, along with brakes and several other areas.
More Buying Guides
Frequently Asked Questions
Is Bilstein better than Rough Country?
It depends on the job. In the bilstein vs rough country comparison, the Bilstein 5100 is a monotube strut with adjustable height that reuses your factory spring, while the Rough Country N3 loaded strut is a simpler bolt-in with a fixed 2-inch lift. Match the part to how you drive and to your exact truck.
Do I need a spring compressor for Bilstein 5100 struts?
Yes. The 5100 strut is sold bare, so the factory coil spring and top mount have to come off the old strut and go onto the new one. That step needs a proper spring compressor, or a shop can do it for you.
Will leveling my F-150 require an alignment?
Yes. Raising the front changes camber and toe, and the strut itself helps hold the wheel in place. Have the alignment set after both struts are installed to protect the tires.
Can I fit larger tires after a 2-inch level?
A level usually adds some room up front, but tire clearance also depends on wheel offset, width and your trim. Check the fitment notes for your wheel and tire before you buy, and look for rubbing at full lock once they are on.
Front end still bouncing or clunking after a level? Call 456 AutoFix at 616-279-3832, Monday to Friday from 8am to 5pm, or set up a suspension check through our contact page.
Short on time during the week? Leave the F-150 at 456 Carrier St NE, Grand Rapids, through our after-hours drop-off, and add a note about when the noise or bounce shows up.
