As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A pickup with worn front struts nods at every stop sign, wanders on the highway and slams over expansion joints. The best struts for trucks are the ones built for your specific pickup, because a Tacoma, a Tundra, a Colorado and a Titan each use their own front strut with its own length, spring and mounts.
Below we cover how truck front ends differ, how to pick between a stock replacement and a leveling or lift strut, and six specific listings for midsize and half-ton trucks. Not sure the struts are actually worn? For warning signs, read our guide on how to tell if struts are bad.
Quick answer
Which struts should a pickup truck get?
For a stock-height truck, a loaded assembly such as Monroe Quick-Strut, Unity or Gabriel ReadyMount restores the factory ride with no spring compressor. Owners who want a little lift can look at a Bilstein 5100, a FOX 2.0 coilover or Rough Country N3 leveling struts. Always match the listing to your exact year, cab and drivetrain.
Our Quick Picks
Three quick picks: a loaded strut for the Frontier, a matched front pair for the Tundra and a lift coilover pair for the Tacoma. All six listings are reviewed below.

Monroe Quick-Strut 271102
An OE-style complete strut for Nissan's midsize pickup.

Unity 2-11921-11922-001
Both front corners of a full-size Toyota in one box.

FOX 2.0 Performance 985-02-002
A complete front coilover pair with adjustable lift.
How a Pickup’s Front End Is Built
Nearly every current midsize and half-ton pickup uses independent front suspension with a coilover strut at each front corner. The strut sits between the lower control arm and a tower in the frame, and the coil spring wraps around it. At the back, most of these trucks ride on leaf springs with separate shock absorbers, so a rear shock is a different purchase.
Front struts for trucks come in three broad forms, and the listings below cover all of them:
- Loaded assembly: the strut, coil spring, upper mount and boot arrive bolted together and go in as one unit.
- Bare strut: only the damper body. You move the old spring and mount across, which takes a spring compressor.
- Leveling or lift strut: a longer assembly, or one with an adjustable spring seat, that raises the front of the truck.
Picking by Ride Height and Daily Use
Choosing the best struts for trucks starts with what yours does. A pickup used for commuting at factory height usually suits an OE-style loaded strut. If you want to remove the factory nose-down rake, a leveling strut lifts the front about two inches.
Then pin down the fitment details the listing asks for:
- Model year and generation, since a 2015 Colorado and a 2023 Colorado use different parts.
- Drivetrain, 2WD or 4WD, and on some trucks the number of wheel lugs.
- Trim and package, because off-road packages such as TRD often use their own struts.
Put those details into the Amazon fit checker before ordering,. Plan to replace both front struts as a pair so the truck sits level and brakes straight.
Best Struts for Trucks: Six Picks, One Pickup Each
Each pick is one Amazon US listing for a named truck. If you drive a different model, use it as a guide to that brand’s range and look up the matching part number for your pickup.
1. Monroe Quick-Strut 271102: Loaded Front Strut and Coil Spring Assembly for Nissan Frontier

- Strut, coil spring and upper mount preassembled
- Listed for 2005-2021 Nissan Frontier
- No spring compressor needed to install
- Protective coating, salt spray tested
The second-generation Frontier stayed in production for well over a decade, so plenty of them are now on their original front struts. This Monroe listing is a Quick-Strut assembly, part number 271102, and its compatibility line names the 2005 to 2021 Nissan Frontier along with the 2009 to 2012 Suzuki Equator, which shares the same platform.
Quick-Strut is Monroe’s loaded design, so the strut, application-specific coil spring and upper mount come preassembled. Monroe says the spring is calibrated to the OE design to restore ride height, and the listing stresses that no spring compressor is needed. The upper mount is described as helping steering precision and cutting noise, vibration and memory steer. For trucks that see road salt, the maker notes a protective coating with salt spray testing to reduce rust.
This listing covers one corner, so order a second matching assembly for the other side and fit them as a pair. Frontier front ends vary by drivetrain, engine and trim, and Monroe sells related part numbers for different versions, so enter your year, engine and trim in the Amazon Confirmed Fit bar and read any qualifier notes before you buy. Plan on an alignment once both struts are in.
View Monroe Quick-Strut 271102 on Amazon
2. Unity 2-11921-11922-001: Front Complete Strut Assembly Pair for 2007-2013 Toyota Tundra

- Front left and right assemblies in one kit
- Listed for 2007-2013 Toyota Tundra
- Includes top mount, bearing plate and spring
- Excludes TRD package trucks
Buying both front struts in one kit is the easy way to keep a pickup even side to side, and that is how this Unity listing is packaged. The kit, part number 2-11921-11922-001, contains a front left and a front right complete strut assembly, and the title names the 2007 to 2013 Toyota Tundra as the application.
Each assembly arrives built up with the top mount, bearing plate, bumper, insulators and coil spring already in place. Unity says the design restores the factory ride height and gives a stable, comfortable ride, and that because every component is new, no specialty tools are required for the swap. That matters on an older Tundra, where the original mounts and spring isolators have usually hardened or cracked after years of salt and heat cycles.
The key limit is spelled out in the listing: it excludes trucks with the TRD package, which use different front struts. Tundra versions from these years also differ by cab, bed length and drivetrain, so check your exact truck against the Amazon fit checker before ordering. These are OE-style replacements for a stock-height Tundra, not a lift or leveling part, and the truck should be aligned once they are fitted.
View Unity 2-11921-11922-001 on Amazon

3. Gabriel G57092 Ultra ReadyMount: Loaded Front Strut Assembly for Nissan Titan

- Preassembled strut with spring and mount
- Listed for Nissan Titan, Armada and QX56
- 4.49 in stroke, 14.92 in extended length
- Interchanges with KYB SR4230 and SR4227
The first-generation Titan shares its front suspension with the Armada and the Infiniti QX56, which is why this Gabriel listing names all three. Part number G57092 is an Ultra ReadyMount loaded strut assembly, and its fitment list names the Nissan Titan, calling out 2007 to 2015 trucks in both 4WD and RWD form, plus the 2005 to 2015 Armada 4WD and the 2004 to 2010 QX56 4WD.
The listing gives a 4.49 inch stroke and a 14.92 inch extended length, and it lists interchange numbers that include KYB SR4230 and SR4227, which helps when you compare it against the part on your truck. Gabriel says every ReadyMount strut assembly is fit and ride tested and can save up to an hour and a half of install time, because the assembly removes the need to compress the coil spring.
It is sold as a single unit, so buy two to do both front corners at the same time. Titan versions differ by year, cab and drivetrain, and the Titan XD is a separate truck, so do not assume this listing covers every Titan; confirm your details with the Amazon fit checker before ordering. Schedule an alignment after the install.
View Gabriel G57092 ReadyMount on Amazon
4. Bilstein B8 5100 24-294218: 46mm Ride Height Adjustable Front Strut for 2019-2020 Ford Ranger

- 46 mm monotube for fade-free damping
- Adjustable spring perch for front lift
- Listed for 2019-2020 Ford Ranger
- Reuses the stock coil spring and hardware
When Ford brought the Ranger back to the US, owners quickly started looking for ways to level its nose-down stance. This Bilstein 5100 listing, part number 24-294218, is a front strut for the 2019 to 2020 Ranger built around a 46 mm monotube design that Bilstein describes as giving consistent, fade-free damping in all conditions.
Its main feature is an adjustable spring perch. Moving the clip on the strut body raises the front, and the listing gives lift of up to 2.75 inches depending on the application, which Bilstein presents as an alternative to coil spring spacers. The maker also notes increased suspension travel, and the strut uses the truck’s stock front coil spring and original mounting hardware.
That last point means this is a bare strut, not a loaded assembly. The factory spring has to be compressed and transferred, and that is only safe with a proper tool, so read our guide to the best coil spring compressor before you start or leave it to a shop. Buy one for each side, confirm your year and drivetrain with the Amazon fit checker, since later Rangers may use other part numbers, and get an alignment after setting the height.
View Bilstein 5100 24-294218 on Amazon

5. FOX 2.0 Performance 985-02-002: Front Coil-Over Pair with 0-2 Inch Lift for 2005-2016 Toyota Tacoma

- Front pair of struts with springs
- Listed for 2005-2016 Toyota Tacoma
- Adjustable preload ring, 0-2 in lift
- Fits 4WD, and 2WD trucks with 6 lugs
The Tacoma has one of the largest aftermarket followings of any midsize pickup, and many owners raise the front once the factory struts wear out. This FOX listing, part number 985-02-002, is a front pair of 2.0 Performance coil-overs with springs, named for the 2005 to 2016 Toyota Tacoma at factory height or with up to 2 inches of front lift.
Lift is set with an adjustable preload ring on each coilover, anywhere from stock height up to 2 inches. The listing notes that the coilovers come preset at 2 inches, so an owner who wants to stay closer to stock will need to back the preload off before installing. Because the springs are included, each corner goes in as a complete unit.
Fitment has a clear limit: the listing fits 4WD trucks and only those 2WD trucks that have 6 lug wheels, so 5 lug 2WD Tacomas are excluded. Lifting the front changes the suspension geometry, so an alignment is a must, and trucks run at the taller settings sometimes need extra parts such as upper control arms. Check your exact year, cab and drivetrain in the Amazon fit checker before ordering this pair.
View FOX 2.0 Performance 985-02-002 on Amazon
6. Rough Country N3 501077: 2 Inch Leveling Loaded Struts for 2015-2022 Chevy Colorado and GMC Canyon

- Preloaded coil, no strut disassembly
- 2 in of lift with no strut spacers
- Listed for 2015-2022 Colorado and Canyon
- Nitrogen charged, 1 3/8 in bore
Like most pickups, the second-generation Colorado leaves the factory sitting lower at the front than the back. This Rough Country listing, part number 501077, is a set of N3 loaded leveling struts named for the 2015 to 2022 Chevy Colorado and its twin, the GMC Canyon, and it raises the front by 2 inches without separate strut spacers.
Rough Country says the strut is structurally engineered for lifted use and comes with the coil already loaded, so no strut disassembly or spring compressor is required. The damper is nitrogen gas charged, which the maker says improves ride and handling and reduces oil aeration. The listing also notes a 1 3/8 inch bore and a hardened chromed piston rod for corrosion resistance and sealing, a useful detail on a truck that sees salted roads.
Leveling changes how the front end sits, so plan on an alignment, and check your headlight aim afterward. The ZR2 and later Colorado generations use different suspension, and the 2023 and newer trucks have their own Rough Country part numbers, so confirm your year, trim and drivetrain in the Amazon fit checker before ordering. Fit both front corners at the same time.
View Rough Country N3 501077 on Amazon
Matching Each Strut Type to the Job
The table sorts the six listings by what they do to the truck. Pick the row that fits your plans, then confirm the part number.
| Strut type | Listings here | Good for | Watch for |
|---|---|---|---|
| Loaded OE-style assembly | Monroe Quick-Strut (Frontier), Unity pair (Tundra), Gabriel ReadyMount (Titan) | Stock-height trucks used daily | Package exclusions such as TRD |
| Bare monotube strut | Bilstein 5100 (Ranger) | Owners who want adjustable front height | Needs the factory spring moved over |
| Lift coilover | FOX 2.0 Performance (Tacoma) | Trucks that see dirt and trails | Comes preset at 2 inches of lift |
| Leveling loaded strut | Rough Country N3 (Colorado) | Removing the factory rake | Alignment and headlight aim afterward |
Off-road coilovers tend to be simpler than people expect. FOX describes its Performance series truck shocks as a bolt-on line with no reservoirs and no compression adjusters.

The best struts for trucks are not always the same parts that suit a family car. For sedans and crossovers, see our roundup of the best shocks and struts for daily drivers.
Salt, Frost Heaves and Plows in West Michigan
Pickups in Grand Rapids take a beating from November to April. Road salt eats strut bodies, lower mounting bolts and spring seats, and spring thaw leaves deep potholes on the way to work.
Noise often shows up before the ride gets bad. A dry upper mount or a worn sway bar link can creak much like a tired strut, and our guide to why a car squeaks when going over bumps helps you tell those apart. A sagging corner can also point to a broken coil spring rather than the damper.

Plowing adds another wrinkle. A leveling or heavier strut does not raise how much weight the front axle can carry, because the springs and the truck’s ratings set that. If you mount a plow, follow the truck maker’s plow guidance first, then choose struts to suit.
When the Strut Job Should Go to a Shop
A loaded assembly on a midsize truck is a reasonable job at home with jack stands, a torque wrench and some penetrating oil. A bare strut is a different story, because the coil spring has to be compressed and stores enough energy to cause serious injury if it slips.
Every front strut change, and any change in ride height, calls for a wheel alignment afterward. Lifting the front alters camber and toe, and skipping the alignment can wear a new set of tires quickly.

Our suspension repair service in Grand Rapids covers front struts, rear shocks, mounts and the steering parts around them on domestic and import pickups. Steering and suspension is one of the areas where Hendrick Hoffman, who owns the shop, carries both ASE and State of Michigan certification.
More Buying Guides
Frequently Asked Questions
Do pickup trucks have struts or shocks?
Most midsize and half-ton pickups with independent front suspension have a coilover strut at each front wheel and separate shocks at the rear axle. Older trucks with a solid front axle use shocks at both ends.
Are the best struts for trucks loaded assemblies or bare struts?
For most owners, a loaded assembly is the simpler choice because it includes a new spring and mount and needs no spring compressor. A bare strut such as the Bilstein 5100 suits owners who want adjustable height and are ready to transfer the factory spring.
Will leveling struts let my truck carry more weight?
No. Leveling struts change ride height, not load capacity. The springs, axles and the truck’s weight ratings decide how much it can carry or plow.
Does my truck need an alignment after new struts?
Yes. Replacing front struts disturbs camber and toe, and any change in front ride height moves them further. Have the alignment checked right after the install.
Has your pickup started bouncing, clunking or leaning on one corner? Call 456 AutoFix at 616-279-3832 between 8am and 5pm, Monday to Friday, or set up a suspension inspection through our contact page.
If the workday gets in the way, park the truck at our garage, 456 Carrier St NE, Grand Rapids, and leave the keys with our after-hours drop-off.
